KiCad PCB EDA Suite
ZONE_FILLER_TOOL Class Reference

ZONE_FILLER_TOOL. More...

#include <zone_filler_tool.h>

Inheritance diagram for ZONE_FILLER_TOOL:
PCB_TOOL_BASE TOOL_INTERACTIVE TOOL_BASE

Public Types

enum  RESET_REASON { RUN, MODEL_RELOAD, GAL_SWITCH }
 

Determines the reason of reset for a tool

More...
 

Public Member Functions

 ZONE_FILLER_TOOL ()
 
 ~ZONE_FILLER_TOOL ()
 
void Reset (RESET_REASON aReason) override
 Function Reset() Brings the tool to a known, initial state. More...
 
void CheckAllZones (wxWindow *aCaller, PROGRESS_REPORTER *aReporter=nullptr)
 
void FillAllZones (wxWindow *aCaller, PROGRESS_REPORTER *aReporter=nullptr)
 
int ZoneFill (const TOOL_EVENT &aEvent)
 
int ZoneFillAll (const TOOL_EVENT &aEvent)
 
int ZoneUnfill (const TOOL_EVENT &aEvent)
 
int ZoneUnfillAll (const TOOL_EVENT &aEvent)
 
virtual bool Init () override
 Function Init() Init() is called once upon a registration of the tool. More...
 
void SetEditModules (bool aEnabled)
 Function SetEditModules() More...
 
bool EditingModules () const
 
void Activate ()
 Function Activate() Runs the tool. More...
 
TOOL_MENUGetToolMenu ()
 
void SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Function SetContextMenu() More...
 
void RunMainStack (std::function< void()> aFunc)
 Function RunMainStack() More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Go() More...
 
TOOL_EVENTWait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Wait() More...
 
TOOL_TYPE GetType () const
 Function GetType() Returns the type of the tool. More...
 
TOOL_ID GetId () const
 Function GetId() Returns the unique identifier of the tool. More...
 
const std::string & GetName () const
 Function GetName() Returns the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool. More...
 
bool IsToolActive () const
 

Protected Types

enum  INTERACTIVE_PLACEMENT_OPTIONS { IPO_ROTATE = 0x01, IPO_FLIP = 0x02, IPO_SINGLE_CLICK = 0x04, IPO_REPEAT = 0x08 }
 Options for placing items interactively. More...
 

Protected Member Functions

void doInteractiveItemPlacement (const std::string &aTool, INTERACTIVE_PLACER_BASE *aPlacer, const wxString &aCommitMessage, int aOptions=IPO_ROTATE|IPO_FLIP|IPO_REPEAT)
 Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc. More...
 
KIGFX::PCB_VIEWview () const
 
KIGFX::VIEW_CONTROLScontrols () const
 
PCB_BASE_EDIT_FRAMEframe () const
 
BOARDboard () const
 
MODULEmodule () const
 
const PCB_DISPLAY_OPTIONSdisplayOptions () const
 
PCB_DRAW_PANEL_GALcanvas () const
 
const PCBNEW_SELECTIONselection () const
 
PCBNEW_SELECTIONselection ()
 
void attachManager (TOOL_MANAGER *aManager)
 Function attachManager() More...
 
KIGFX::VIEWgetView () const
 Function getView() More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Function getViewControls() More...
 
template<typename T >
T * getEditFrame () const
 Function getEditFrame() More...
 
template<typename T >
T * getModel () const
 Function getModel() More...
 

Protected Attributes

bool m_editModules
 
TOOL_MENU m_menu
 functions below are not yet implemented - their interface may change More...
 
TOOL_TYPE m_type
 

Stores the type of the tool.

More...
 
TOOL_ID m_toolId
 

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

More...
 
std::string m_toolName
 

Name of the tool.

More...
 
TOOL_MANAGERm_toolMgr
 

Private Member Functions

void singleShotRefocus (wxIdleEvent &)
 

Refocuses on an idle event (used after the Progress Reporter messes up the focus)

More...
 
void setTransitions () override
 

Sets up handlers for various events.

More...
 

Detailed Description

ZONE_FILLER_TOOL.

Handles actions specific to filling copper zones.

Definition at line 40 of file zone_filler_tool.h.

Member Enumeration Documentation

◆ INTERACTIVE_PLACEMENT_OPTIONS

Options for placing items interactively.

Enumerator
IPO_ROTATE 

Handle the rotate action in the loop by calling the item's rotate method.

IPO_FLIP 

Handle flip action in the loop by calling the item's flip method.

IPO_SINGLE_CLICK 

Create an item immediately on placement starting, otherwise show the pencil cursor until the item is created.

IPO_REPEAT 

Allow repeat placement of the item.

Definition at line 116 of file pcb_tool_base.h.

116  {
118  IPO_ROTATE = 0x01,
119 
121  IPO_FLIP = 0x02,
122 
125  IPO_SINGLE_CLICK = 0x04,
126 
128  IPO_REPEAT = 0x08
129  };
Handle flip action in the loop by calling the item's flip method.
Allow repeat placement of the item.
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
Handle the rotate action in the loop by calling the item's rotate method.

◆ RESET_REASON

enum TOOL_BASE::RESET_REASON
inherited

Determines the reason of reset for a tool

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

Definition at line 79 of file tool_base.h.

80  {
81  RUN,
82  MODEL_RELOAD,
83  GAL_SWITCH
84  };
Model changes (required full reload)
Definition: tool_base.h:82
Tool is invoked after being inactive.
Definition: tool_base.h:81
Rendering engine changes.
Definition: tool_base.h:83

Constructor & Destructor Documentation

◆ ZONE_FILLER_TOOL()

ZONE_FILLER_TOOL::ZONE_FILLER_TOOL ( )

Definition at line 40 of file zone_filler_tool.cpp.

40  :
41  PCB_TOOL_BASE( "pcbnew.ZoneFiller" )
42 {
43 }
PCB_TOOL_BASE(TOOL_ID aId, const std::string &aName)
Constructor.
Definition: pcb_tool_base.h:75

◆ ~ZONE_FILLER_TOOL()

ZONE_FILLER_TOOL::~ZONE_FILLER_TOOL ( )

Definition at line 46 of file zone_filler_tool.cpp.

47 {
48 }

Member Function Documentation

◆ Activate()

void TOOL_INTERACTIVE::Activate ( )
inherited

Function Activate() Runs the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 51 of file tool_interactive.cpp.

52 {
54 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool InvokeTool(TOOL_ID aToolId)
Function InvokeTool() Calls a tool by sending a tool activation event to tool of given ID.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), EDIT_TOOL::copyToClipboard(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), PAD_TOOL::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), LIB_TREE::onContextMenu(), POINT_EDITOR::OnSelectionChange(), GROUP_TOOL::PickNewMember(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), DRC_TOOL::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Function attachManager()

Sets the TOOL_MANAGER the tool will belong to. Called by TOOL_MANAGER::RegisterTool()

Definition at line 60 of file tool_base.cpp.

61 {
62  m_toolMgr = aManager;
63 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

◆ board()

BOARD* PCB_TOOL_BASE::board ( ) const
inlineprotectedinherited

Definition at line 166 of file pcb_tool_base.h.

166 { return getModel<BOARD>(); }

Referenced by PCBNEW_CONTROL::AppendBoard(), AUTOPLACE_TOOL::autoplace(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), EDIT_TOOL::ChangeTrackWidth(), CheckAllZones(), PCB_INSPECTION_TOOL::ClearHighlight(), EDIT_TOOL::copyToClipboard(), MICROWAVE_TOOL::createInductorBetween(), ROUTER_TOOL::CustomTrackWidthDialog(), PCBNEW_CONTROL::DeleteItemCursor(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawSegment(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), FillAllZones(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::GetBoard(), SELECTION_TOOL::getCollectorsGuide(), GROUP_TOOL::Group(), PCB_INSPECTION_TOOL::highlightNet(), PCBNEW_CONTROL::LayerNext(), PCBNEW_CONTROL::LayerPrev(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PCB_TOOL_BASE::module(), EDIT_TOOL::MoveExact(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::Paste(), PCBNEW_CONTROL::placeBoardItems(), PCB_EDITOR_CONTROL::PlaceModule(), PAD_TOOL::PlacePad(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), SELECTION_TOOL::RebuildSelection(), PAD_TOOL::recombinePad(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::RepairBoard(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), SELECTION_TOOL::Selectable(), SELECTION_TOOL::selectAllItemsOnNet(), SELECTION_TOOL::selectAllItemsOnSheet(), SELECTION_TOOL::selectConnectedTracks(), SELECTION_TOOL::selectPoint(), PCBNEW_CONTROL::TrackDisplayMode(), GROUP_TOOL::Ungroup(), PCBNEW_CONTROL::ViaDisplayMode(), PCBNEW_CONTROL::ZoneDisplayMode(), ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZoneUnfillAll().

◆ canvas()

PCB_DRAW_PANEL_GAL * PCB_TOOL_BASE::canvas ( ) const
protectedinherited

◆ CheckAllZones()

void ZONE_FILLER_TOOL::CheckAllZones ( wxWindow *  aCaller,
PROGRESS_REPORTER aReporter = nullptr 
)

Definition at line 56 of file zone_filler_tool.cpp.

57 {
58  if( !getEditFrame<PCB_EDIT_FRAME>()->m_ZoneFillsDirty )
59  return;
60 
61  std::vector<ZONE_CONTAINER*> toFill;
62 
63  for( auto zone : board()->Zones() )
64  toFill.push_back(zone);
65 
66  BOARD_COMMIT commit( this );
67 
68  ZONE_FILLER filler( frame()->GetBoard(), &commit );
69 
70  if( aReporter )
71  filler.SetProgressReporter( aReporter );
72  else
73  filler.InstallNewProgressReporter( aCaller, _( "Checking Zones" ), 4 );
74 
75  if( filler.Fill( toFill, true, aCaller ) )
76  {
77  commit.Push( _( "Fill Zone(s)" ), false );
78  getEditFrame<PCB_EDIT_FRAME>()->m_ZoneFillsDirty = false;
79  }
80  else
81  {
82  commit.Revert();
83  }
84 
85  canvas()->Refresh();
86 }
BOARD * board() const
PCB_BASE_EDIT_FRAME * frame() const
virtual void Refresh(bool aEraseBackground=true, const wxRect *aRect=NULL) override
Update the board display after modifying it by a python script (note: it is automatically called by a...
BOARD * GetBoard()
#define _(s)
Definition: 3d_actions.cpp:33
PCB_DRAW_PANEL_GAL * canvas() const

References _, PCB_TOOL_BASE::board(), PCB_TOOL_BASE::canvas(), ZONE_FILLER::Fill(), PCB_TOOL_BASE::frame(), GetBoard(), ZONE_FILLER::InstallNewProgressReporter(), BOARD_COMMIT::Push(), EDA_DRAW_PANEL_GAL::Refresh(), BOARD_COMMIT::Revert(), and ZONE_FILLER::SetProgressReporter().

Referenced by DRC_TOOL::RunTests().

◆ controls()

◆ displayOptions()

const PCB_DISPLAY_OPTIONS & PCB_TOOL_BASE::displayOptions ( ) const
protectedinherited

◆ doInteractiveItemPlacement()

void PCB_TOOL_BASE::doInteractiveItemPlacement ( const std::string &  aTool,
INTERACTIVE_PLACER_BASE aPlacer,
const wxString &  aCommitMessage,
int  aOptions = IPO_ROTATE | IPO_FLIP | IPO_REPEAT 
)
protectedinherited

Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.

More complex interactive processes are not supported here, you should implement a customised event loop for those.

Parameters
aItemCreatorthe callable that will attempt to create the item
aCommitMessagethe message used on a successful commit

Definition at line 37 of file pcb_tool_base.cpp.

40 {
41  using namespace std::placeholders;
42  std::unique_ptr<BOARD_ITEM> newItem;
43 
44  frame()->PushTool( aTool );
45  Activate();
46 
47  BOARD_COMMIT commit( frame() );
48 
50 
51  // do not capture or auto-pan until we start placing an item
52  controls()->ShowCursor( true );
53 
54  // Add a VIEW_GROUP that serves as a preview for the new item
55  PCBNEW_SELECTION preview;
56  view()->Add( &preview );
57 
58  aPlacer->m_board = board();
59  aPlacer->m_frame = frame();
60  aPlacer->m_modifiers = 0;
61 
62  auto makeNewItem = [&] ( VECTOR2I aPosition )
63  {
64  if( frame()->GetModel() )
65  newItem = aPlacer->CreateItem();
66 
67  if( newItem )
68  {
69  newItem->SetPosition( (wxPoint) aPosition );
70  preview.Add( newItem.get() );
71 
72  if( newItem->Type() == PCB_MODULE_T )
73  {
74  auto module = dyn_cast<MODULE*>( newItem.get() );
75 
76  // footprints have more drawable parts
77  module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
78  }
79  }
80  };
81 
82  if( aOptions & IPO_SINGLE_CLICK )
83  makeNewItem( controls()->GetCursorPosition() );
84 
85  auto setCursor =
86  [&]()
87  {
88  if( !newItem )
90  else
92  };
93 
94  // Set initial cursor
95  setCursor();
96 
97  // Main loop: keep receiving events
98  while( TOOL_EVENT* evt = Wait() )
99  {
100  setCursor();
101 
102  VECTOR2I cursorPos = controls()->GetCursorPosition();
103  aPlacer->m_modifiers = evt->Modifier();
104 
105  auto cleanup = [&] ()
106  {
107  newItem = nullptr;
108  preview.Clear();
109  view()->Update( &preview );
110  controls()->SetAutoPan( false );
111  controls()->CaptureCursor( false );
112  controls()->ShowCursor( true );
113  };
114 
115  if( evt->IsCancelInteractive() )
116  {
117  if( aOptions & IPO_SINGLE_CLICK )
118  {
119  cleanup();
120  frame()->PopTool( aTool );
121  break;
122  }
123  else if( newItem )
124  cleanup();
125  else
126  {
127  frame()->PopTool( aTool );
128  break;
129  }
130  }
131  else if( evt->IsActivate() )
132  {
133  if( newItem )
134  cleanup();
135 
136  if( evt->IsPointEditor() )
137  {
138  // don't exit (the point editor runs in the background)
139  }
140  else if( evt->IsMoveTool() )
141  {
142  // leave ourselves on the stack so we come back after the move
143  break;
144  }
145  else
146  {
147  frame()->PopTool( aTool );
148  break;
149  }
150  }
151  else if( evt->IsClick( BUT_LEFT ) )
152  {
153  if( !newItem )
154  {
155  // create the item if possible
156  makeNewItem( cursorPos );
157 
158  // no item created, so wait for another click
159  if( !newItem )
160  continue;
161 
162  controls()->CaptureCursor( true );
163  controls()->SetAutoPan( true );
164  }
165  else
166  {
167  auto oldFlags = newItem->GetFlags();
168  newItem->ClearFlags();
169 
170  if( !aPlacer->PlaceItem( newItem.get(), commit ) )
171  {
172  newItem->SetFlags( oldFlags );
173  continue;
174  }
175 
176  preview.Clear();
177  newItem.release();
178  commit.Push( aCommitMessage );
179 
180  controls()->CaptureCursor( false );
181  controls()->SetAutoPan( false );
182  controls()->ShowCursor( true );
183 
184  if( !( aOptions & IPO_REPEAT ) )
185  break;
186 
187  if( aOptions & IPO_SINGLE_CLICK )
188  makeNewItem( controls()->GetCursorPosition() );
189 
190  setCursor();
191  }
192  }
193  else if( evt->IsClick( BUT_RIGHT ) )
194  {
196  }
197  else if( evt->IsAction( &PCB_ACTIONS::trackViaSizeChanged ) )
198  {
200  }
201  else if( newItem && evt->Category() == TC_COMMAND )
202  {
203  /*
204  * Handle any events that can affect the item as we move it around
205  */
206  if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) && ( aOptions & IPO_ROTATE ) )
207  {
208  const int rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle( *frame(), *evt );
209  newItem->Rotate( newItem->GetPosition(), rotationAngle );
210  view()->Update( &preview );
211  }
212  else if( evt->IsAction( &PCB_ACTIONS::flip ) && ( aOptions & IPO_FLIP ) )
213  {
214  newItem->Flip( newItem->GetPosition(), frame()->Settings().m_FlipLeftRight );
215  view()->Update( &preview );
216  }
217  else if( evt->IsAction( &PCB_ACTIONS::viaSizeInc )
218  || evt->IsAction( &PCB_ACTIONS::viaSizeDec ) )
219  {
220  // Refresh preview after event runs
222  }
223  else if( evt->IsAction( &ACTIONS::refreshPreview ) )
224  {
225  preview.Clear();
226  newItem.release();
227 
228  makeNewItem( (wxPoint) cursorPos );
229  aPlacer->SnapItem( newItem.get() );
230  view()->Update( &preview );
231  }
232  }
233 
234  else if( newItem && evt->IsMotion() )
235  {
236  // track the cursor
237  newItem->SetPosition( (wxPoint) cursorPos );
238  aPlacer->SnapItem( newItem.get() );
239 
240  // Show a preview of the item
241  view()->Update( &preview );
242  }
243 
244  else
245  evt->SetPassEvent();
246  }
247 
248  view()->Remove( &preview );
249 }
static TOOL_ACTION selectionClear
Clears the current selection.
Definition: pcb_actions.h:62
virtual void ShowCursor(bool aEnabled)
Function ShowCursor() Enables or disables display of cursor.
TOOL_MENU m_menu
functions below are not yet implemented - their interface may change
virtual void Clear() override
Function Clear() Removes all the stored items from the group.
Definition: selection.h:95
TOOL_EVENT * Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Function Wait()
virtual bool PlaceItem(BOARD_ITEM *aItem, BOARD_COMMIT &aCommit)
Handle flip action in the loop by calling the item's flip method.
BOARD * board() const
static TOOL_ACTION viaSizeInc
Definition: pcb_actions.h:296
virtual std::unique_ptr< BOARD_ITEM > CreateItem()=0
PCB_DRAW_PANEL_GAL * GetCanvas() const override
Return a pointer to GAL-based canvas of given EDA draw frame.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
virtual void PushTool(const std::string &actionName)
NB: the definition of "tool" is different at the user level.
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Function RunAction() Runs the specified action.
Definition: tool_manager.h:141
static TOOL_ACTION trackViaSizeChanged
Definition: pcb_actions.h:299
bool IsRotateToolEvt(const TOOL_EVENT &aEvt)
Function isRotateToolEvt()
void SetCurrentCursor(KICURSOR cursor)
Function SetCurrentCursor Set the current cursor shape for this panel.
virtual void Remove(VIEW_ITEM *aItem) override
Function Remove() Removes a VIEW_ITEM from the view.
Definition: pcb_view.cpp:76
virtual void Add(EDA_ITEM *aItem)
Definition: selection.h:76
TOOL_MANAGER * GetManager() const
Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.
Definition: tool_base.h:143
PCB_BASE_EDIT_FRAME * frame() const
virtual void SnapItem(BOARD_ITEM *aItem)
class MODULE, a footprint
Definition: typeinfo.h:89
virtual void Update(const VIEW_ITEM *aItem, int aUpdateFlags) const override
For dynamic VIEWs, informs the associated VIEW that the graphical representation of this item has cha...
Definition: pcb_view.cpp:93
const PCBNEW_SELECTION & selection() const
Allow repeat placement of the item.
virtual void PopTool(const std::string &actionName)
virtual void CaptureCursor(bool aEnabled)
Function CaptureCursor() Forces the cursor to stay within the drawing panel area.
TOOL_EVENT.
Definition: tool_event.h:171
KIGFX::PCB_VIEW * view() const
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
virtual void Add(VIEW_ITEM *aItem)
Function Add() Adds an item to the group.
Definition: view_group.cpp:55
virtual void SetAutoPan(bool aEnabled)
Function SetAutoPan Turns on/off auto panning (this feature is used when there is a tool active (eg.
virtual BOARD_ITEM_CONTAINER * GetModel() const =0
Function GetModel()
void RunOnChildren(const std::function< void(BOARD_ITEM *)> &aFunction) const
Function RunOnChildren.
static TOOL_ACTION flip
Flipping of selected objects.
Definition: pcb_actions.h:108
Handle the rotate action in the loop by calling the item's rotate method.
KIGFX::VIEW_CONTROLS * controls() const
MODULE * module() const
PCBNEW_SETTINGS & Settings()
void Activate()
Function Activate() Runs the tool.
virtual void Add(VIEW_ITEM *aItem, int aDrawPriority=-1) override
Function Add() Adds a VIEW_ITEM to the view.
Definition: pcb_view.cpp:59
PCB_BASE_EDIT_FRAME * m_frame
Definition: pcb_tool_base.h:62
int GetEventRotationAngle(const PCB_BASE_EDIT_FRAME &aFrame, const TOOL_EVENT &aEvt)
Function getEventRotationAngle()
void ShowContextMenu(SELECTION &aSelection)
Function ShowContextMenu.
Definition: tool_menu.cpp:59
static TOOL_ACTION viaSizeDec
Definition: pcb_actions.h:297
static TOOL_ACTION refreshPreview
Definition: actions.h:104
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.

References TOOL_INTERACTIVE::Activate(), KIGFX::PCB_VIEW::Add(), KIGFX::VIEW_GROUP::Add(), SELECTION::Add(), PCB_TOOL_BASE::board(), BUT_LEFT, BUT_RIGHT, KIGFX::VIEW_CONTROLS::CaptureCursor(), SELECTION::Clear(), PCB_TOOL_BASE::controls(), INTERACTIVE_PLACER_BASE::CreateItem(), PCB_ACTIONS::flip, PCB_TOOL_BASE::frame(), PCB_BASE_FRAME::GetCanvas(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), TOOL_EVT_UTILS::GetEventRotationAngle(), TOOL_BASE::GetManager(), PCB_BASE_FRAME::GetModel(), PCB_TOOL_BASE::IPO_FLIP, PCB_TOOL_BASE::IPO_REPEAT, PCB_TOOL_BASE::IPO_ROTATE, PCB_TOOL_BASE::IPO_SINGLE_CLICK, TOOL_EVT_UTILS::IsRotateToolEvt(), INTERACTIVE_PLACER_BASE::m_board, PCBNEW_SETTINGS::m_FlipLeftRight, INTERACTIVE_PLACER_BASE::m_frame, TOOL_INTERACTIVE::m_menu, INTERACTIVE_PLACER_BASE::m_modifiers, TOOL_BASE::m_toolMgr, PCB_TOOL_BASE::module(), PCB_MODULE_T, PENCIL, PLACE, INTERACTIVE_PLACER_BASE::PlaceItem(), TOOLS_HOLDER::PopTool(), BOARD_COMMIT::Push(), TOOLS_HOLDER::PushTool(), ACTIONS::refreshPreview, KIGFX::PCB_VIEW::Remove(), TOOL_MANAGER::RunAction(), MODULE::RunOnChildren(), PCB_TOOL_BASE::selection(), PCB_ACTIONS::selectionClear, KIGFX::VIEW_CONTROLS::SetAutoPan(), EDA_DRAW_PANEL_GAL::SetCurrentCursor(), PCB_BASE_FRAME::Settings(), TOOL_MENU::ShowContextMenu(), KIGFX::VIEW_CONTROLS::ShowCursor(), INTERACTIVE_PLACER_BASE::SnapItem(), TC_COMMAND, PCB_ACTIONS::trackViaSizeChanged, KIGFX::PCB_VIEW::Update(), PCB_ACTIONS::viaSizeDec, PCB_ACTIONS::viaSizeInc, PCB_TOOL_BASE::view(), and TOOL_INTERACTIVE::Wait().

Referenced by MICROWAVE_TOOL::addMicrowaveFootprint(), DRAWING_TOOL::DrawVia(), and PAD_TOOL::PlacePad().

◆ EditingModules()

bool PCB_TOOL_BASE::EditingModules ( ) const
inlineinherited

◆ FillAllZones()

void ZONE_FILLER_TOOL::FillAllZones ( wxWindow *  aCaller,
PROGRESS_REPORTER aReporter = nullptr 
)

Definition at line 96 of file zone_filler_tool.cpp.

97 {
98  std::vector<ZONE_CONTAINER*> toFill;
99 
100  BOARD_COMMIT commit( this );
101 
102  for( ZONE_CONTAINER* zone : board()->Zones() )
103  toFill.push_back( zone );
104 
105  ZONE_FILLER filler( board(), &commit );
106 
107  if( !board()->GetDesignSettings().m_DRCEngine->RulesValid() )
108  {
109  WX_INFOBAR* infobar = frame()->GetInfoBar();
110  wxHyperlinkCtrl* button = new wxHyperlinkCtrl( infobar, wxID_ANY, _("Show DRC rules"),
111  wxEmptyString );
112 
113  button->Bind( wxEVT_COMMAND_HYPERLINK, std::function<void( wxHyperlinkEvent& aEvent )>(
114  [&]( wxHyperlinkEvent& aEvent )
115  {
116  getEditFrame<PCB_EDIT_FRAME>()->ShowBoardSetupDialog( _( "Rules" ) );
117  } ) );
118 
119  infobar->RemoveAllButtons();
120  infobar->AddButton( button );
121 
122  infobar->ShowMessageFor( _( "Zone fills may be inaccurate. DRC rules contain errors." ),
123  10000, wxICON_WARNING );
124  }
125 
126  if( aReporter )
127  filler.SetProgressReporter( aReporter );
128  else
129  filler.InstallNewProgressReporter( aCaller, _( "Fill All Zones" ), 3 );
130 
131  if( filler.Fill( toFill ) )
132  {
133  commit.Push( _( "Fill Zone(s)" ), false );
134  getEditFrame<PCB_EDIT_FRAME>()->m_ZoneFillsDirty = false;
135  }
136  else
137  {
138  commit.Revert();
139  }
140 
141  canvas()->Refresh();
142 
143  // wxWidgets has keyboard focus issues after the progress reporter. Re-setting the focus
144  // here doesn't work, so we delay it to an idle event.
145  canvas()->Bind( wxEVT_IDLE, &ZONE_FILLER_TOOL::singleShotRefocus, this );
146 }
void ShowMessageFor(const wxString &aMessage, int aTime, int aFlags=wxICON_INFORMATION)
Show the infobar with the provided message and icon for a specific period of time.
Definition: infobar.cpp:109
ZONE_CONTAINER handles a list of polygons defining a copper zone.
Definition: class_zone.h:61
void AddButton(wxButton *aButton)
Add an already created button to the infobar.
Definition: infobar.cpp:185
BOARD * board() const
void singleShotRefocus(wxIdleEvent &)
Refocuses on an idle event (used after the Progress Reporter messes up the focus)
PCB_BASE_EDIT_FRAME * frame() const
void RemoveAllButtons()
Remove all the buttons that have been added by the user.
Definition: infobar.cpp:226
virtual void Refresh(bool aEraseBackground=true, const wxRect *aRect=NULL) override
Update the board display after modifying it by a python script (note: it is automatically called by a...
A modified version of the wxInfoBar class that allows us to:
Definition: infobar.h:70
#define _(s)
Definition: 3d_actions.cpp:33
WX_INFOBAR * GetInfoBar()
PCB_DRAW_PANEL_GAL * canvas() const

References _, WX_INFOBAR::AddButton(), PCB_TOOL_BASE::board(), PCB_TOOL_BASE::canvas(), ZONE_FILLER::Fill(), PCB_TOOL_BASE::frame(), EDA_BASE_FRAME::GetInfoBar(), ZONE_FILLER::InstallNewProgressReporter(), BOARD_COMMIT::Push(), EDA_DRAW_PANEL_GAL::Refresh(), WX_INFOBAR::RemoveAllButtons(), BOARD_COMMIT::Revert(), ZONE_FILLER::SetProgressReporter(), WX_INFOBAR::ShowMessageFor(), and singleShotRefocus().

Referenced by DRC_TOOL::RunTests(), and ZoneFillAll().

◆ frame()

PCB_BASE_EDIT_FRAME* PCB_TOOL_BASE::frame ( ) const
inlineprotectedinherited

Definition at line 161 of file pcb_tool_base.h.

162  {
163  return getEditFrame<PCB_BASE_EDIT_FRAME>();
164  }

Referenced by POINT_EDITOR::addCorner(), AUTOPLACE_TOOL::autoplace(), PCB_TOOL_BASE::canvas(), CheckAllZones(), PNS::TOOL_BASE::checkSnap(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), ROUTER_TOOL::CustomTrackWidthDialog(), FOOTPRINT_EDITOR_TOOLS::DeleteFootprint(), PCB_TOOL_BASE::displayOptions(), PCB_TOOL_BASE::doInteractiveItemPlacement(), ROUTER_TOOL::DpDimensionsDialog(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), PCB_EDITOR_CONTROL::ExportSpecctraDSN(), FillAllZones(), EDIT_TOOL::FilletTracks(), ROUTER_TOOL::finishInteractive(), EDIT_TOOL::Flip(), PCB_EDITOR_CONTROL::FlipPcbView(), GLOBAL_EDIT_TOOL::GlobalDeletions(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PCB_EDITOR_CONTROL::ImportSpecctraSession(), ROUTER_TOOL::Init(), SELECTION_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCBNEW_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::meanderSettingsDialog(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), GROUP_TOOL::PickNewMember(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), PAD_TOOL::pushPadSettings(), PAD_TOOL::recombinePad(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), PNS::TOOL_BASE::Reset(), ROUTER_TOOL::SelectCopperLayerPair(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), POINT_EDITOR::setEditedPoint(), ROUTER_TOOL::SettingsDialog(), GLOBAL_EDIT_TOOL::swapBoardItem(), GLOBAL_EDIT_TOOL::SwapLayers(), ROUTER_TOOL::switchLayerOnViaPlacement(), PCB_EDITOR_CONTROL::UpdateSchematicFromPCB(), ZoneFill(), and ZoneFillAll().

◆ getEditFrame()

template<typename T >
T* TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Function getEditFrame()

Returns the application window object, casted to requested user type.

Definition at line 187 of file tool_base.h.

188  {
189 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
190  wxASSERT( dynamic_cast<T*>( getToolHolderInt() ) );
191 #endif
192  return static_cast<T*>( getToolHolderInt() );
193  }
TOOLS_HOLDER * getToolHolderInt() const
Definition: tool_base.cpp:48

References TOOL_BASE::getToolHolderInt().

Referenced by ZONE_CREATE_HELPER::createNewZone().

◆ GetId()

TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Function GetId() Returns the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 121 of file tool_base.h.

122  {
123  return m_toolId;
124  }
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

◆ GetManager()

TOOL_MANAGER* TOOL_BASE::GetManager ( ) const
inlineinherited

Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.

Returns
Instance of the TOOL_MANAGER. If there is no TOOL_MANAGER associated, it returns NULL.

Definition at line 143 of file tool_base.h.

144  {
145  return m_toolMgr;
146  }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by BOARD_COMMIT::BOARD_COMMIT(), ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), PCB_TOOL_BASE::doInteractiveItemPlacement(), ACTION_MENU::getToolManager(), LIB_TREE::onContextMenu(), ZONE_CREATE_HELPER::OnFirstPoint(), ACTION_MENU::OnMenuEvent(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ getModel()

template<typename T >
T* TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Function getModel()

Returns the model object if it matches the requested type.

Definition at line 201 of file tool_base.h.

202  {
203  EDA_ITEM* m = getModelInt();
204 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
205  wxASSERT( dynamic_cast<T*>( m ) );
206 #endif
207  return static_cast<T*>( m );
208  }
EDA_ITEM * getModelInt() const
Definition: tool_base.cpp:54
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: eda_item.h:148

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createZoneFromExisting(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ GetName()

const std::string& TOOL_BASE::GetName ( void  ) const
inlineinherited

Function GetName() Returns the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 132 of file tool_base.h.

133  {
134  return m_toolName;
135  }
std::string m_toolName
Name of the tool.
Definition: tool_base.h:218

References TOOL_BASE::m_toolName.

Referenced by TOOL_MANAGER::dispatchInternal(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), and TOOL_MANAGER::RegisterTool().

◆ GetToolMenu()

◆ GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Function GetType() Returns the type of the tool.

Returns
The type of the tool.

Definition at line 110 of file tool_base.h.

111  {
112  return m_type;
113  }
TOOL_TYPE m_type
Stores the type of the tool.
Definition: tool_base.h:211

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

◆ getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Function getView()

Returns the instance of VIEW object used in the application. It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 36 of file tool_base.cpp.

37 {
38  return m_toolMgr->GetView();
39 }
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:290
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), SCH_EDIT_TOOL::ChangeTextType(), EE_INSPECTION_TOOL::checkPart(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::collectHits(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_EDIT_TOOL::DoDelete(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomFit(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), MICROWAVE_TOOL::drawMicrowaveInductor(), PL_DRAWING_TOOLS::DrawShape(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_EDITOR_CONTROL::FindComponentAndItem(), EE_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCBNEW_CONTROL::GridResetOrigin(), PCBNEW_CONTROL::GridSetOrigin(), SELECTION_TOOL::GuessSelectionCandidates(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), PNS::TOOL_BASE::highlightNet(), PCB_INSPECTION_TOOL::highlightNet(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_MOVE_TOOL::moveItem(), PL_EDIT_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PNS::TOOL_BASE::pickSingleItem(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::Reset(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), DRAWING_TOOL::Reset(), EE_SELECTION_TOOL::Reset(), SELECTION_TOOL::Reset(), EE_TOOL_BASE< SCH_BASE_FRAME >::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), GERBVIEW_SELECTION_TOOL::selectable(), SELECTION_TOOL::Selectable(), SELECTION_TOOL::SelectAll(), EE_SELECTION_TOOL::SelectAll(), PL_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectionContains(), SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::SelectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), SCH_EDITOR_CONTROL::UpdateFind(), EE_POINT_EDITOR::updateItem(), PL_POINT_EDITOR::updateItem(), POINT_EDITOR::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_VIEWER_TOOLS::view(), PCB_TOOL_BASE::view(), SELECTION_TOOL::zoomFitSelection(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and SELECTION_TOOL::~SELECTION_TOOL().

◆ getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Function getViewControls()

Returns the instance of VIEW_CONTROLS object used in the application. It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.)

Returns
The instance of VIEW_CONTROLS.

Definition at line 42 of file tool_base.cpp.

43 {
44  return m_toolMgr->GetViewControls();
45 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:292

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), SCH_EDITOR_CONTROL::AssignNetclass(), SCH_EDIT_TOOL::BreakWire(), PCB_TOOL_BASE::controls(), EDIT_TOOL::copyToClipboard(), COMMON_TOOLS::CursorControl(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), PL_POINT_EDITOR::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), LENGTH_TUNER_TOOL::performTuning(), LIB_DRAWING_TOOLS::PlaceAnchor(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), POINT_EDITOR::Reset(), DRAWING_TOOL::Reset(), COMMON_TOOLS::ResetLocalCoords(), GERBVIEW_SELECTION_TOOL::selectCursor(), SELECTION_TOOL::selectCursor(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCBNEW_PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateItem(), LIB_MOVE_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

◆ Go()

template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited

Function Go()

Defines which state (aStateFunc) to go when a certain event arrives (aConditions). No conditions means any event.

Definition at line 129 of file tool_interactive.h.

131 {
132  TOOL_STATE_FUNC sptr = std::bind( aStateFunc, static_cast<T*>( this ), std::placeholders::_1 );
133 
134  goInternal( sptr, aConditions );
135 }
std::function< int(const TOOL_EVENT &)> TOOL_STATE_FUNC
Definition: tool_base.h:58
void goInternal(TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)

References TOOL_INTERACTIVE::goInternal().

Referenced by ZOOM_TOOL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), LENGTH_TUNER_TOOL::setTransitions(), PCB_REANNOTATE_TOOL::setTransitions(), GERBVIEW_INSPECTION_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), LIB_PIN_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), SCH_NAVIGATE_TOOL::setTransitions(), PL_DRAWING_TOOLS::setTransitions(), EE_POINT_EDITOR::setTransitions(), PL_POINT_EDITOR::setTransitions(), COMMON_CONTROL::setTransitions(), setTransitions(), LIB_MOVE_TOOL::setTransitions(), KICAD_MANAGER_CONTROL::setTransitions(), CONVERT_TOOL::setTransitions(), DRC_TOOL::setTransitions(), PCB_VIEWER_TOOLS::setTransitions(), POINT_EDITOR::setTransitions(), LIB_DRAWING_TOOLS::setTransitions(), MICROWAVE_TOOL::setTransitions(), GLOBAL_EDIT_TOOL::setTransitions(), GERBVIEW_CONTROL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), PAD_TOOL::setTransitions(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::setTransitions(), SCH_MOVE_TOOL::setTransitions(), GROUP_TOOL::setTransitions(), LIB_CONTROL::setTransitions(), PL_EDITOR_CONTROL::setTransitions(), LIB_EDIT_TOOL::setTransitions(), PL_EDIT_TOOL::setTransitions(), FOOTPRINT_EDITOR_TOOLS::setTransitions(), SCH_EDIT_TOOL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), PCBNEW_CONTROL::setTransitions(), EDA_3D_CONTROLLER::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), COMMON_TOOLS::setTransitions(), CVPCB_CONTROL::setTransitions(), CVPCB_ASSOCIATION_TOOL::setTransitions(), SCH_LINE_WIRE_BUS_TOOL::setTransitions(), PCBNEW_PICKER_TOOL::setTransitions(), PICKER_TOOL::setTransitions(), PCB_INSPECTION_TOOL::setTransitions(), PCB_EDITOR_CONTROL::setTransitions(), DRAWING_TOOL::setTransitions(), EDIT_TOOL::setTransitions(), SELECTION_TOOL::setTransitions(), PL_SELECTION_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), and EE_SELECTION_TOOL::setTransitions().

◆ Init()

bool PCB_TOOL_BASE::Init ( void  )
overridevirtualinherited

Function Init() Init() is called once upon a registration of the tool.

Returns
True if the initialization went fine, false - otherwise.

Reimplemented from TOOL_BASE.

Reimplemented in EDIT_TOOL, SELECTION_TOOL, PCB_INSPECTION_TOOL, DRAWING_TOOL, POSITION_RELATIVE_TOOL, PCB_EDITOR_CONTROL, POINT_EDITOR, FOOTPRINT_EDITOR_TOOLS, GLOBAL_EDIT_TOOL, PAD_TOOL, GROUP_TOOL, PCB_REANNOTATE_TOOL, LENGTH_TUNER_TOOL, and ROUTER_TOOL.

Definition at line 252 of file pcb_tool_base.cpp.

253 {
254  // A basic context manu. Many (but not all) tools will choose to override this.
255 
256  auto& ctxMenu = m_menu.GetMenu();
257 
258  // cancel current tool goes in main context menu at the top if present
260  ctxMenu.AddSeparator( 1 );
261 
262  // Finally, add the standard zoom/grid items
263  getEditFrame<PCB_BASE_FRAME>()->AddStandardSubMenus( m_menu );
264 
265  return true;
266 }
static bool ShowAlways(const SELECTION &aSelection)
The default condition function (always returns true).
TOOL_MENU m_menu
functions below are not yet implemented - their interface may change
CONDITIONAL_MENU & GetMenu()
Function GetMenu.
Definition: tool_menu.cpp:46
static TOOL_ACTION cancelInteractive
Definition: actions.h:65
void AddItem(const TOOL_ACTION &aAction, const SELECTION_CONDITION &aCondition, int aOrder=ANY_ORDER)
Adds a menu entry to run a TOOL_ACTION on selected items.

References CONDITIONAL_MENU::AddItem(), ACTIONS::cancelInteractive, TOOL_MENU::GetMenu(), TOOL_INTERACTIVE::m_menu, and SELECTION_CONDITIONS::ShowAlways().

◆ IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 31 of file tool_base.cpp.

32 {
33  return m_toolMgr->IsToolActive( m_toolId );
34 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool IsToolActive(TOOL_ID aId) const
Function IsToolActive() Returns true if a tool with given id is active (executing)

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by EDIT_TOOL::isRouterActive(), and ROUTER_TOOL::onViaCommand().

◆ module()

◆ Reset()

void ZONE_FILLER_TOOL::Reset ( RESET_REASON  aReason)
overridevirtual

Function Reset() Brings the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Reimplemented from PCB_TOOL_BASE.

Definition at line 51 of file zone_filler_tool.cpp.

52 {
53 }

◆ RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Function RunMainStack()

Calls a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 87 of file tool_interactive.cpp.

88 {
89  m_toolMgr->RunMainStack( this, std::move( aFunc ) );
90 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

◆ selection() [1/2]

const PCBNEW_SELECTION & PCB_TOOL_BASE::selection ( ) const
protectedinherited

Definition at line 290 of file pcb_tool_base.cpp.

291 {
292  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
293  const auto& selection = selTool->GetSelection();
294  return selection;
295 }
SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
const PCBNEW_SELECTION & selection() const

References TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplaceSelected(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), EDIT_TOOL::ChangeTrackWidth(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), EDIT_TOOL::CreateArray(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), PCB_INSPECTION_TOOL::doHideNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawZone(), EDIT_TOOL::Duplicate(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), GROUP_TOOL::EnterGroup(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), EDIT_TOOL::FilletTracks(), SELECTION_TOOL::filterSelection(), EDIT_TOOL::Flip(), DRAWING_TOOL::getSourceZoneForAction(), GROUP_TOOL::Group(), PCB_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::InspectClearance(), PCB_INSPECTION_TOOL::InspectConstraints(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), PCBNEW_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceImportedGraphics(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::PositionRelative(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), GROUP_TOOL::RemoveFromGroup(), GLOBAL_EDIT_TOOL::RemoveUnusedPads(), EDIT_TOOL::Rotate(), PCB_TOOL_BASE::selection(), SELECTION_TOOL::selectNet(), DRAWING_TOOL::SetAnchor(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), GROUP_TOOL::Ungroup(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), PCB_EDITOR_CONTROL::ZoneDuplicate(), ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZoneUnfill().

◆ selection() [2/2]

PCBNEW_SELECTION & PCB_TOOL_BASE::selection ( )
protectedinherited

Definition at line 298 of file pcb_tool_base.cpp.

299 {
300  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
301  auto& selection = selTool->GetSelection();
302  return selection;
303 }
SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
const PCBNEW_SELECTION & selection() const

References TOOL_MANAGER::GetTool(), TOOL_BASE::m_toolMgr, and PCB_TOOL_BASE::selection().

◆ SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Function SetContextMenu()

Assigns a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 76 of file tool_interactive.cpp.

77 {
78  if( aMenu )
79  aMenu->SetTool( this );
80  else
81  aTrigger = CMENU_OFF;
82 
83  m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
84 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void SetTool(TOOL_INTERACTIVE *aTool)
Sets a tool that is the creator of the menu.
void ScheduleContextMenu(TOOL_BASE *aTool, ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Sets behaviour of the tool's context popup menu.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), TOOL_MENU::ShowContextMenu(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ SetEditModules()

void PCB_TOOL_BASE::SetEditModules ( bool  aEnabled)
inlineinherited

Function SetEditModules()

Toggles edit module mode. When enabled, one may select parts of footprints individually (graphics, pads, etc.), so they can be modified.

Parameters
aEnableddecides if the mode should be enabled.

Definition at line 101 of file pcb_tool_base.h.

102  {
103  m_editModules = aEnabled;
104  }

References PCB_TOOL_BASE::m_editModules.

◆ setTransitions()

void ZONE_FILLER_TOOL::setTransitions ( )
overrideprivatevirtual

Sets up handlers for various events.

Reimplemented from PCB_TOOL_BASE.

Definition at line 231 of file zone_filler_tool.cpp.

232 {
233  // Zone actions
238 }
int ZoneUnfill(const TOOL_EVENT &aEvent)
static TOOL_ACTION zoneFillAll
Definition: pcb_actions.h:303
int ZoneUnfillAll(const TOOL_EVENT &aEvent)
void Go(int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
Function Go()
static TOOL_ACTION zoneFill
Definition: pcb_actions.h:302
int ZoneFill(const TOOL_EVENT &aEvent)
static TOOL_ACTION zoneUnfillAll
Definition: pcb_actions.h:305
static TOOL_ACTION zoneUnfill
Definition: pcb_actions.h:304
int ZoneFillAll(const TOOL_EVENT &aEvent)

References TOOL_INTERACTIVE::Go(), ZoneFill(), PCB_ACTIONS::zoneFill, ZoneFillAll(), PCB_ACTIONS::zoneFillAll, ZoneUnfill(), PCB_ACTIONS::zoneUnfill, ZoneUnfillAll(), and PCB_ACTIONS::zoneUnfillAll.

◆ singleShotRefocus()

void ZONE_FILLER_TOOL::singleShotRefocus ( wxIdleEvent &  )
private

Refocuses on an idle event (used after the Progress Reporter messes up the focus)

Definition at line 89 of file zone_filler_tool.cpp.

90 {
91  canvas()->SetFocus();
92  canvas()->Unbind( wxEVT_IDLE, &ZONE_FILLER_TOOL::singleShotRefocus, this );
93 }
void singleShotRefocus(wxIdleEvent &)
Refocuses on an idle event (used after the Progress Reporter messes up the focus)
virtual void SetFocus() override
PCB_DRAW_PANEL_GAL * canvas() const

References PCB_TOOL_BASE::canvas(), and EDA_DRAW_PANEL_GAL::SetFocus().

Referenced by FillAllZones().

◆ view()

◆ Wait()

TOOL_EVENT * TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Function Wait()

Suspends execution of the tool until an event specified in aEventList arrives. No parameters means waiting for any event.

Definition at line 57 of file tool_interactive.cpp.

58 {
59  return m_toolMgr->ScheduleWait( this, aEventList );
60 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_EVENT * ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pauses execution of a given tool until one or more events matching aConditions arrives.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), ROUTER_TOOL::InlineDrag(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ ZoneFill()

int ZONE_FILLER_TOOL::ZoneFill ( const TOOL_EVENT aEvent)

Definition at line 149 of file zone_filler_tool.cpp.

150 {
151  std::vector<ZONE_CONTAINER*> toFill;
152 
153  BOARD_COMMIT commit( this );
154 
155  if( auto passedZone = aEvent.Parameter<ZONE_CONTAINER*>() )
156  {
157  if( passedZone->Type() == PCB_ZONE_AREA_T )
158  toFill.push_back( passedZone );
159  }
160  else
161  {
162  for( auto item : selection() )
163  {
164  if( auto zone = dyn_cast<ZONE_CONTAINER*>( item ) )
165  toFill.push_back( zone );
166  }
167  }
168 
169  ZONE_FILLER filler( board(), &commit );
170  filler.InstallNewProgressReporter( frame(), _( "Fill Zone" ), 4 );
171 
172  if( filler.Fill( toFill ) )
173  commit.Push( _( "Fill Zone(s)" ), false );
174  else
175  commit.Revert();
176 
177  canvas()->Refresh();
178  return 0;
179 }
ZONE_CONTAINER handles a list of polygons defining a copper zone.
Definition: class_zone.h:61
BOARD * board() const
class ZONE_CONTAINER, a zone area
Definition: typeinfo.h:106
PCB_BASE_EDIT_FRAME * frame() const
const PCBNEW_SELECTION & selection() const
T Parameter() const
Function Parameter() Returns a non-standard parameter assigned to the event.
Definition: tool_event.h:435
virtual void Refresh(bool aEraseBackground=true, const wxRect *aRect=NULL) override
Update the board display after modifying it by a python script (note: it is automatically called by a...
#define _(s)
Definition: 3d_actions.cpp:33
PCB_DRAW_PANEL_GAL * canvas() const

References _, PCB_TOOL_BASE::board(), PCB_TOOL_BASE::canvas(), ZONE_FILLER::Fill(), PCB_TOOL_BASE::frame(), ZONE_FILLER::InstallNewProgressReporter(), TOOL_EVENT::Parameter(), PCB_ZONE_AREA_T, BOARD_COMMIT::Push(), EDA_DRAW_PANEL_GAL::Refresh(), BOARD_COMMIT::Revert(), and PCB_TOOL_BASE::selection().

Referenced by setTransitions().

◆ ZoneFillAll()

int ZONE_FILLER_TOOL::ZoneFillAll ( const TOOL_EVENT aEvent)

Definition at line 182 of file zone_filler_tool.cpp.

183 {
184  FillAllZones( frame() );
185  return 0;
186 }
PCB_BASE_EDIT_FRAME * frame() const
void FillAllZones(wxWindow *aCaller, PROGRESS_REPORTER *aReporter=nullptr)

References FillAllZones(), and PCB_TOOL_BASE::frame().

Referenced by setTransitions().

◆ ZoneUnfill()

int ZONE_FILLER_TOOL::ZoneUnfill ( const TOOL_EVENT aEvent)

Definition at line 189 of file zone_filler_tool.cpp.

190 {
191  BOARD_COMMIT commit( this );
192 
193  for( EDA_ITEM* item : selection() )
194  {
195  assert( item->Type() == PCB_ZONE_AREA_T );
196 
197  ZONE_CONTAINER* zone = static_cast<ZONE_CONTAINER*>( item );
198 
199  commit.Modify( zone );
200 
201  zone->SetIsFilled( false );
202  zone->ClearFilledPolysList();
203  }
204 
205  commit.Push( _( "Unfill Zone" ) );
206  canvas()->Refresh();
207 
208  return 0;
209 }
ZONE_CONTAINER handles a list of polygons defining a copper zone.
Definition: class_zone.h:61
class ZONE_CONTAINER, a zone area
Definition: typeinfo.h:106
const PCBNEW_SELECTION & selection() const
virtual void Refresh(bool aEraseBackground=true, const wxRect *aRect=NULL) override
Update the board display after modifying it by a python script (note: it is automatically called by a...
#define _(s)
Definition: 3d_actions.cpp:33
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: eda_item.h:148
PCB_DRAW_PANEL_GAL * canvas() const

References _, PCB_TOOL_BASE::canvas(), COMMIT::Modify(), PCB_ZONE_AREA_T, BOARD_COMMIT::Push(), EDA_DRAW_PANEL_GAL::Refresh(), and PCB_TOOL_BASE::selection().

Referenced by setTransitions().

◆ ZoneUnfillAll()

int ZONE_FILLER_TOOL::ZoneUnfillAll ( const TOOL_EVENT aEvent)

Definition at line 212 of file zone_filler_tool.cpp.

213 {
214  BOARD_COMMIT commit( this );
215 
216  for( ZONE_CONTAINER* zone : board()->Zones() )
217  {
218  commit.Modify( zone );
219 
220  zone->SetIsFilled( false );
221  zone->ClearFilledPolysList();
222  }
223 
224  commit.Push( _( "Unfill All Zones" ) );
225  canvas()->Refresh();
226 
227  return 0;
228 }
ZONE_CONTAINER handles a list of polygons defining a copper zone.
Definition: class_zone.h:61
BOARD * board() const
virtual void Refresh(bool aEraseBackground=true, const wxRect *aRect=NULL) override
Update the board display after modifying it by a python script (note: it is automatically called by a...
#define _(s)
Definition: 3d_actions.cpp:33
PCB_DRAW_PANEL_GAL * canvas() const

References _, PCB_TOOL_BASE::board(), PCB_TOOL_BASE::canvas(), COMMIT::Modify(), BOARD_COMMIT::Push(), and EDA_DRAW_PANEL_GAL::Refresh().

Referenced by setTransitions().

Member Data Documentation

◆ m_editModules

◆ m_menu

TOOL_MENU TOOL_INTERACTIVE::m_menu
protectedinherited

functions below are not yet implemented - their interface may change

Definition at line 108 of file tool_interactive.h.

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), TOOL_INTERACTIVE::GetToolMenu(), ROUTER_TOOL::Init(), LENGTH_TUNER_TOOL::Init(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Init(), SCH_EDIT_TOOL::Init(), PICKER_TOOL::Init(), PL_EDIT_TOOL::Init(), LIB_CONTROL::Init(), LIB_DRAWING_TOOLS::Init(), FOOTPRINT_EDITOR_TOOLS::Init(), PCB_VIEWER_TOOLS::Init(), PL_DRAWING_TOOLS::Init(), PCB_EDITOR_CONTROL::Init(), SCH_DRAWING_TOOLS::Init(), EDA_3D_CONTROLLER::Init(), GERBVIEW_SELECTION_TOOL::Init(), PL_SELECTION_TOOL::Init(), DRAWING_TOOL::Init(), EE_SELECTION_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), SELECTION_TOOL::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), PCB_TOOL_BASE::Init(), PL_EDIT_TOOL::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ m_toolId

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 214 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

◆ m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 219 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), PL_SELECTION_TOOL::AddItemsToSel(), EE_SELECTION_TOOL::AddItemsToSel(), PL_SELECTION_TOOL::AddItemToSel(), EE_SELECTION_TOOL::AddItemToSel(), SELECTION_TOOL::AddItemToSel(), SCH_MOVE_TOOL::AlignElements(), SCH_EDITOR_CONTROL::AssignNetclass(), CVPCB_ASSOCIATION_TOOL::Associate(), TOOL_BASE::attachManager(), SCH_EDIT_TOOL::AutoplaceFields(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), GERBVIEW_CONTROL::ClearAllLayers(), PCB_INSPECTION_TOOL::ClearHighlight(), SCH_EDITOR_CONTROL::ClearHighlight(), SELECTION_TOOL::ClearSelection(), PL_SELECTION_TOOL::ClearSelection(), GERBVIEW_SELECTION_TOOL::clearSelection(), EE_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TOOL::ConvertDeMorgan(), LIB_EDIT_TOOL::Copy(), PL_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), MICROWAVE_TOOL::createInductorBetween(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), COMMON_TOOLS::CursorControl(), SCH_EDITOR_CONTROL::Cut(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), LIB_EDIT_TOOL::DoDelete(), SCH_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_INSPECTION_TOOL::doHideNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawRectangle(), DRAWING_TOOL::drawSegment(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), LIB_EDIT_TOOL::editGraphicProperties(), PAD_TOOL::EditPad(), LIB_EDIT_TOOL::editSymbolProperties(), SCH_EDITOR_CONTROL::EditWithLibEdit(), GROUP_TOOL::EnterGroup(), SCH_NAVIGATE_TOOL::EnterSheet(), SCH_EDITOR_CONTROL::EnterSheet(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandConnection(), PAD_TOOL::explodePad(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::findCallback(), SCH_EDITOR_CONTROL::FindComponentAndItem(), POINT_EDITOR::finishItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getToolHolderInt(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), PCBNEW_CONTROL::GridSetOrigin(), GROUP_TOOL::Group(), EE_SELECTION_TOOL::GuessSelectionCandidates(), GERBVIEW_CONTROL::HighlightControl(), PCB_INSPECTION_TOOL::HighlightItem(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::ImportWorksheetContent(), LIB_EDIT_TOOL::Init(), PL_EDIT_TOOL::Init(), SCH_EDIT_TOOL::Init(), GROUP_TOOL::Init(), CONVERT_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), LIB_CONTROL::Init(), PAD_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_POINT_EDITOR::Init(), PCB_EDITOR_CONTROL::Init(), POINT_EDITOR::Init(), POSITION_RELATIVE_TOOL::Init(), PCB_INSPECTION_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::InspectClearance(), PCB_INSPECTION_TOOL::InspectConstraints(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isInteractiveDragEnabled(), EDIT_TOOL::isRouterActive(), TOOL_BASE::IsToolActive(), GROUP_TOOL::LeaveGroup(), SCH_NAVIGATE_TOOL::LeaveSheet(), SCH_EDITOR_CONTROL::LeaveSheet(), COMMON_CONTROL::ListHotKeys(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), LIB_CONTROL::OnDeMorgan(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), LIB_EDIT_TOOL::PinTable(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), PCBNEW_CONTROL::Print(), GERBVIEW_CONTROL::Print(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EE_SELECTION_TOOL::RebuildSelection(), LIB_EDIT_TOOL::Redo(), SCH_EDITOR_CONTROL::Redo(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), GERBVIEW_CONTROL::ReloadAllLayers(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), GROUP_TOOL::RemoveFromGroup(), PL_SELECTION_TOOL::RemoveItemFromSel(), EE_SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemFromSel(), PL_SELECTION_TOOL::RemoveItemsFromSel(), EE_SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_DRAWING_TOOLS::RepeatDrawItem(), EE_SELECTION_TOOL::RequestSelection(), SELECTION_TOOL::RequestSelection(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), TOOL_INTERACTIVE::RunMainStack(), DRC_TOOL::RunTests(), EE_SELECTION_TOOL::SelectConnection(), PCB_TOOL_BASE::selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), SELECTION_TOOL::SelectItems(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectNet(), PL_SELECTION_TOOL::SelectPoint(), GERBVIEW_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), SELECTION_TOOL::selectSameSheet(), SELECTION_TOOL::selectSheetContents(), DRAWING_TOOL::SetAnchor(), TOOL_INTERACTIVE::SetContextMenu(), EDA_3D_CONTROLLER::SetMaterial(), DRC_TOOL::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), EDA_3D_CONTROLLER::ToggleVisibility(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), LIB_EDIT_TOOL::Undo(), SCH_EDITOR_CONTROL::Undo(), GROUP_TOOL::Ungroup(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SELECTION_TOOL::UnselectItems(), PNS::TOOL_BASE::updateEndItem(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PNS::TOOL_BASE::updateStartItem(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), PCB_EDITOR_CONTROL::ZoneDuplicate(), and PCB_EDITOR_CONTROL::ZoneMerge().

◆ m_toolName

std::string TOOL_BASE::m_toolName
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 218 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

◆ m_type

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Stores the type of the tool.

Definition at line 211 of file tool_base.h.

Referenced by TOOL_BASE::GetType(), and BOARD_COMMIT::Push().


The documentation for this class was generated from the following files: