KiCad PCB EDA Suite
SCH_ITEM Class Referenceabstract

Base class for any item which can be embedded within the SCHEMATIC container class, and therefore instances of derived classes should only be found in EESCHEMA or other programs that use class SCHEMATIC and its contents. More...

#include <sch_item.h>

Inheritance diagram for SCH_ITEM:
EDA_ITEM KIGFX::VIEW_ITEM INSPECTABLE DELETED_SHEET_ITEM SCH_BITMAP SCH_BUS_ENTRY_BASE SCH_COMPONENT SCH_FIELD SCH_JUNCTION SCH_LINE SCH_MARKER SCH_NO_CONNECT SCH_PIN SCH_SHEET SCH_TEXT

Public Member Functions

 SCH_ITEM (EDA_ITEM *aParent, KICAD_T aType)
 
 SCH_ITEM (const SCH_ITEM &aItem)
 
 ~SCH_ITEM ()
 
virtual wxString GetClass () const override
 Function GetClass returns the class name. More...
 
virtual void SwapData (SCH_ITEM *aItem)
 Swap the internal data structures aItem with the schematic item. More...
 
SCH_ITEMDuplicate (bool doClone=false) const
 Routine to create a new copy of given item. More...
 
virtual bool IsMovableFromAnchorPoint ()
 
wxPointGetStoredPos ()
 
void SetStoredPos (wxPoint aPos)
 
SCHEMATICSchematic () const
 Searches the item hierarchy to find a SCHEMATIC. More...
 
virtual bool IsLocked () const
 
virtual void SetLocked (bool aLocked)
 Set the 'lock' status to aLocked for of this item. More...
 
SCH_LAYER_ID GetLayer () const
 Return the layer this item is on. More...
 
void SetLayer (SCH_LAYER_ID aLayer)
 Set the layer this item is on. More...
 
void ViewGetLayers (int aLayers[], int &aCount) const override
 Return the layers the item is drawn on (which may be more than its "home" layer) More...
 
virtual int GetPenWidth () const
 
virtual void Print (RENDER_SETTINGS *aSettings, const wxPoint &aOffset)=0
 Print a schematic item. More...
 
virtual void Move (const wxPoint &aMoveVector)=0
 Move the item by aMoveVector to a new position. More...
 
virtual void MirrorY (int aYaxis_position)=0
 Mirror item relative to the Y axis about aYaxis_position. More...
 
virtual void MirrorX (int aXaxis_position)=0
 Mirror item relative to the X axis about aXaxis_position. More...
 
virtual void Rotate (wxPoint aPosition)=0
 Rotate the item around aPosition 90 degrees in the clockwise direction. More...
 
virtual void GetEndPoints (std::vector< DANGLING_END_ITEM > &aItemList)
 Add the schematic item end points to aItemList if the item has end points. More...
 
virtual bool UpdateDanglingState (std::vector< DANGLING_END_ITEM > &aItemList, const SCH_SHEET_PATH *aPath=nullptr)
 Test the schematic item to aItemList to check if it's dangling state has changed. More...
 
virtual bool IsDangling () const
 
virtual bool CanConnect (const SCH_ITEM *aItem) const
 
virtual bool IsConnectable () const
 
virtual void GetConnectionPoints (std::vector< wxPoint > &aPoints) const
 Add all the connection points for this item to aPoints. More...
 
void ClearConnections ()
 Clears all of the connection items from the list. More...
 
bool IsConnected (const wxPoint &aPoint) const
 Test the item to see if it is connected to aPoint. More...
 
SCH_CONNECTIONConnection (const SCH_SHEET_PATH &aPath) const
 Retrieve the connection associated with this object in the given sheet. More...
 
ITEM_SETConnectedItems (const SCH_SHEET_PATH &aPath)
 Retrieves the set of items connected to this item on the given sheet. More...
 
void AddConnectionTo (const SCH_SHEET_PATH &aPath, SCH_ITEM *aItem)
 Adds a connection link between this item and another. More...
 
SCH_CONNECTIONInitializeConnection (const SCH_SHEET_PATH &aPath, CONNECTION_GRAPH *aGraph)
 Creates a new connection object associated with this object. More...
 
virtual bool ConnectionPropagatesTo (const EDA_ITEM *aItem) const
 Returns true if this item should propagate connection info to aItem. More...
 
bool IsConnectivityDirty ()
 
void SetConnectivityDirty (bool aDirty=true)
 
NETCLASSPTR NetClass () const
 
FIELDS_AUTOPLACED GetFieldsAutoplaced () const
 Return whether the fields have been automatically placed. More...
 
void ClearFieldsAutoplaced ()
 Set fields automatically placed flag false. More...
 
void AutoAutoplaceFields (SCH_SCREEN *aScreen)
 Autoplace fields only if correct to do so automatically. More...
 
virtual void AutoplaceFields (SCH_SCREEN *aScreen, bool aManual)
 
virtual bool HasLineStroke () const
 Check if this schematic item has line stoke properties. More...
 
virtual STROKE_PARAMS GetStroke () const
 
virtual void SetStroke (const STROKE_PARAMS &aStroke)
 
virtual void Plot (PLOTTER *aPlotter)
 Plot the schematic item to aPlotter. More...
 
virtual void GetNetListItem (NETLIST_OBJECT_LIST &aNetListItems, SCH_SHEET_PATH *aSheetPath)
 Create a new NETLIST_OBJECT for the schematic object and adds it to aNetListItems. More...
 
virtual void SetPosition (const wxPoint &aPosition)=0
 Set the schematic item position to aPosition. More...
 
virtual bool operator< (const SCH_ITEM &aItem) const
 
KICAD_T Type () const
 Function Type() More...
 
EDA_ITEMGetParent () const
 
virtual void SetParent (EDA_ITEM *aParent)
 
bool IsModified () const
 
bool IsNew () const
 
bool IsMoving () const
 
bool IsDragging () const
 
bool IsWireImage () const
 
bool IsSelected () const
 
bool IsResized () const
 
bool IsBrightened () const
 
void SetWireImage ()
 
void SetSelected ()
 
void SetBrightened ()
 
void ClearSelected ()
 
void ClearBrightened ()
 
void SetModified ()
 
int GetState (int type) const
 
void SetState (int type, int state)
 
STATUS_FLAGS GetStatus () const
 
void SetStatus (STATUS_FLAGS aStatus)
 
void SetFlags (STATUS_FLAGS aMask)
 
void ClearFlags (STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
 
STATUS_FLAGS GetFlags () const
 
bool HasFlag (STATUS_FLAGS aFlag)
 
STATUS_FLAGS GetEditFlags () const
 
void ClearTempFlags ()
 
void ClearEditFlags ()
 
virtual bool IsType (const KICAD_T aScanTypes[]) const
 Function IsType Checks whether the item is one of the listed types. More...
 
void SetForceVisible (bool aEnable)
 Function SetForceVisible is used to set and cleag force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible. More...
 
bool IsForceVisible () const
 
virtual void GetMsgPanelInfo (EDA_DRAW_FRAME *aFrame, std::vector< MSG_PANEL_ITEM > &aList)
 Function GetMsgPanelInfo populates aList of MSG_PANEL_ITEM objects with it's internal state for display purposes. More...
 
virtual bool HitTest (const wxPoint &aPosition, int aAccuracy=0) const
 Function HitTest tests if aPosition is contained within or on the bounding box of an item. More...
 
virtual bool HitTest (const EDA_RECT &aRect, bool aContained, int aAccuracy=0) const
 Function HitTest tests if aRect intersects or is contained within the bounding box of an item. More...
 
virtual const EDA_RECT GetBoundingBox () const
 Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes. More...
 
virtual wxPoint GetPosition () const
 
virtual const wxPoint GetFocusPosition () const
 Function GetFocusPosition similar to GetPosition, but allows items to return their visual center rather than their anchor. More...
 
virtual EDA_ITEMClone () const
 Function Clone creates a duplicate of this item with linked list members set to NULL. More...
 
virtual SEARCH_RESULT Visit (INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 Function Visit may be re-implemented for each derived class in order to handle all the types given by its member data. More...
 
virtual wxString GetSelectMenuText (EDA_UNITS aUnits) const
 Function GetSelectMenuText returns the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position. More...
 
virtual BITMAP_DEF GetMenuImage () const
 Function GetMenuImage returns a pointer to an image to be used in menus. More...
 
virtual bool Matches (wxFindReplaceData &aSearchData, void *aAuxData)
 Function Matches compares the item against the search criteria in aSearchData. More...
 
virtual bool Replace (wxFindReplaceData &aSearchData, void *aAuxData=NULL)
 Function Replace performs a text replace using the find and replace criteria in aSearchData on items that support text find and replace. More...
 
virtual bool IsReplaceable () const
 Function IsReplaceable. More...
 
bool operator< (const EDA_ITEM &aItem) const
 Test if another item is less than this object. More...
 
virtual const BOX2I ViewBBox () const override
 Function ViewBBox() returns the bounding box of the item covering all its layers. More...
 
virtual void ViewDraw (int aLayer, VIEW *aView) const
 Function ViewDraw() Draws the parts of the object belonging to layer aLayer. More...
 
virtual unsigned int ViewGetLOD (int aLayer, VIEW *aView) const
 Function ViewGetLOD() Returns the level of detail (LOD) of the item. More...
 
VIEW_ITEM_DATA * viewPrivData () const
 
void ClearViewPrivData ()
 
bool Set (PROPERTY_BASE *aProperty, wxAny &aValue)
 
template<typename T >
bool Set (PROPERTY_BASE *aProperty, T aValue)
 
template<typename T >
bool Set (const wxString &aProperty, T aValue)
 
wxAny Get (PROPERTY_BASE *aProperty)
 
template<typename T >
Get (PROPERTY_BASE *aProperty)
 
template<typename T >
boost::optional< T > Get (const wxString &aProperty)
 

Static Public Member Functions

template<class T >
static SEARCH_RESULT IterateForward (std::deque< T > &aList, INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T ) More...
 
template<class T >
static SEARCH_RESULT IterateForward (std::vector< T > &aList, INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T ) More...
 
static bool Replace (wxFindReplaceData &aSearchData, wxString &aText)
 Helper function used in search and replace dialog Function Replace performs a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace. More...
 
static bool Sort (const EDA_ITEM *aLeft, const EDA_ITEM *aRight)
 Function Sort is a helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers. More...
 

Public Attributes

const KIID m_Uuid
 

Protected Member Functions

bool Matches (const wxString &aText, wxFindReplaceData &aSearchData)
 Function Matches compares aText against search criteria in aSearchData. More...
 

Protected Attributes

SCH_LAYER_ID m_Layer
 
EDA_ITEMS m_connections
 
FIELDS_AUTOPLACED m_fieldsAutoplaced
 
wxPoint m_storedPos
 
std::unordered_map< SCH_SHEET_PATH, ITEM_SETm_connected_items
 Stores pointers to other items that are connected to this one, per sheet. More...
 
std::unordered_map< SCH_SHEET_PATH, SCH_CONNECTION * > m_connection_map
 Stores connectivity information, per sheet. More...
 
bool m_connectivity_dirty
 True if connectivity info might be out of date. More...
 
STATUS_FLAGS m_Status
 
EDA_ITEMm_Parent
 Linked list: Link (parent struct) More...
 
bool m_forceVisible
 
STATUS_FLAGS m_Flags
 

Private Member Functions

virtual bool doIsConnected (const wxPoint &aPosition) const
 Provide the object specific test to see if it is connected to aPosition. More...
 

Friends

class CONNECTION_GRAPH
 

Detailed Description

Base class for any item which can be embedded within the SCHEMATIC container class, and therefore instances of derived classes should only be found in EESCHEMA or other programs that use class SCHEMATIC and its contents.

The corresponding class in Pcbnew is BOARD_ITEM.

Definition at line 187 of file sch_item.h.

Constructor & Destructor Documentation

◆ SCH_ITEM() [1/2]

SCH_ITEM::SCH_ITEM ( EDA_ITEM aParent,
KICAD_T  aType 
)

Definition at line 50 of file sch_item.cpp.

50  :
51  EDA_ITEM( aParent, aType )
52 {
53  m_Layer = LAYER_WIRE; // It's only a default, in fact
55  m_connectivity_dirty = true;
56 }
SCH_LAYER_ID m_Layer
Definition: sch_item.h:192
FIELDS_AUTOPLACED m_fieldsAutoplaced
Definition: sch_item.h:194
bool m_connectivity_dirty
True if connectivity info might be out of date.
Definition: sch_item.h:205
EDA_ITEM(EDA_ITEM *parent, KICAD_T idType)
Definition: base_struct.cpp:59

References FIELDS_AUTOPLACED_NO, LAYER_WIRE, m_connectivity_dirty, m_fieldsAutoplaced, and m_Layer.

◆ SCH_ITEM() [2/2]

SCH_ITEM::SCH_ITEM ( const SCH_ITEM aItem)

Definition at line 59 of file sch_item.cpp.

59  :
60  EDA_ITEM( aItem )
61 {
62  m_Layer = aItem.m_Layer;
64  m_connectivity_dirty = true;
65 }
SCH_LAYER_ID m_Layer
Definition: sch_item.h:192
FIELDS_AUTOPLACED m_fieldsAutoplaced
Definition: sch_item.h:194
bool m_connectivity_dirty
True if connectivity info might be out of date.
Definition: sch_item.h:205
EDA_ITEM(EDA_ITEM *parent, KICAD_T idType)
Definition: base_struct.cpp:59

References m_connectivity_dirty, m_fieldsAutoplaced, and m_Layer.

◆ ~SCH_ITEM()

SCH_ITEM::~SCH_ITEM ( )

Definition at line 68 of file sch_item.cpp.

69 {
70  // Do not let the connections container go out of scope with any objects or they
71  // will be deleted by the container will cause the Eeschema to crash. These objects
72  // are owned by the sheet object container.
73  if( !m_connections.empty() )
74  m_connections.clear();
75 
76  for( const auto& it : m_connection_map )
77  delete it.second;
78 }
EDA_ITEMS m_connections
Definition: sch_item.h:193
std::unordered_map< SCH_SHEET_PATH, SCH_CONNECTION * > m_connection_map
Stores connectivity information, per sheet.
Definition: sch_item.h:202

References m_connection_map, and m_connections.

Member Function Documentation

◆ AddConnectionTo()

void SCH_ITEM::AddConnectionTo ( const SCH_SHEET_PATH aPath,
SCH_ITEM aItem 
)

Adds a connection link between this item and another.

Definition at line 182 of file sch_item.cpp.

183 {
184  m_connected_items[ aSheet ].insert( aItem );
185 }
std::unordered_map< SCH_SHEET_PATH, ITEM_SET > m_connected_items
Stores pointers to other items that are connected to this one, per sheet.
Definition: sch_item.h:199

References m_connected_items.

Referenced by SCH_TEXT::UpdateDanglingState().

◆ AutoAutoplaceFields()

void SCH_ITEM::AutoAutoplaceFields ( SCH_SCREEN aScreen)
inline

Autoplace fields only if correct to do so automatically.

Fields that have been moved by hand are not automatically placed.

Parameters
aScreenis the SCH_SCREEN associated with the current instance of the component.

Definition at line 450 of file sch_item.h.

451  {
452  if( GetFieldsAutoplaced() )
454  }
FIELDS_AUTOPLACED GetFieldsAutoplaced() const
Return whether the fields have been automatically placed.
Definition: sch_item.h:435
virtual void AutoplaceFields(SCH_SCREEN *aScreen, bool aManual)
Definition: sch_item.h:456

References AutoplaceFields(), FIELDS_AUTOPLACED_MANUAL, and GetFieldsAutoplaced().

Referenced by SCH_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Rotate(), and SCH_EDIT_FRAME::SelectUnit().

◆ AutoplaceFields()

virtual void SCH_ITEM::AutoplaceFields ( SCH_SCREEN aScreen,
bool  aManual 
)
inlinevirtual

Reimplemented in SCH_SHEET, and SCH_COMPONENT.

Definition at line 456 of file sch_item.h.

456 { }

Referenced by AutoAutoplaceFields().

◆ CanConnect()

virtual bool SCH_ITEM::CanConnect ( const SCH_ITEM aItem) const
inlinevirtual

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_HIERLABEL, SCH_GLOBALLABEL, SCH_LABEL, SCH_LINE, SCH_BUS_BUS_ENTRY, SCH_BUS_WIRE_ENTRY, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 365 of file sch_item.h.

365 { return m_Layer == aItem->GetLayer(); }
SCH_LAYER_ID m_Layer
Definition: sch_item.h:192
SCH_LAYER_ID GetLayer() const
Return the layer this item is on.
Definition: sch_item.h:272

References GetLayer(), and m_Layer.

◆ ClearBrightened()

void EDA_ITEM::ClearBrightened ( )
inlineinherited

◆ ClearConnections()

void SCH_ITEM::ClearConnections ( )
inline

Clears all of the connection items from the list.

The vector release method is used to prevent the item pointers from being deleted. Do not use the vector erase method on the connection list.

Definition at line 387 of file sch_item.h.

387 { m_connections.clear(); }
EDA_ITEMS m_connections
Definition: sch_item.h:193

References m_connections.

◆ ClearEditFlags()

◆ ClearFieldsAutoplaced()

void SCH_ITEM::ClearFieldsAutoplaced ( )
inline

Set fields automatically placed flag false.

Definition at line 440 of file sch_item.h.

FIELDS_AUTOPLACED m_fieldsAutoplaced
Definition: sch_item.h:194

References FIELDS_AUTOPLACED_NO, and m_fieldsAutoplaced.

Referenced by SCH_MOVE_TOOL::moveItem(), DIALOG_SCH_SHEET_PROPS::TransferDataFromWindow(), and DIALOG_SCH_EDIT_ONE_FIELD::UpdateField().

◆ ClearFlags()

void EDA_ITEM::ClearFlags ( STATUS_FLAGS  aMask = EDA_ITEM_ALL_FLAGS)
inlineinherited

Definition at line 233 of file base_struct.h.

233 { m_Flags &= ~aMask; }
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References EDA_ITEM::m_Flags.

Referenced by FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), PNS_KICAD_IFACE::AddItem(), SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_SCREEN::ClearAnnotation(), EDA_ITEM::ClearBrightened(), EDA_ITEM::ClearEditFlags(), clearModuleItemFlags(), EDA_ITEM::ClearSelected(), EDA_ITEM::ClearTempFlags(), SCH_EDIT_FRAME::ConvertPart(), LIB_EDIT_TOOL::Copy(), LIB_PIN_TOOL::CreateImagePins(), MICROWAVE_TOOL::createMicrowaveInductor(), SCH_EDIT_FRAME::DeleteAnnotation(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), KIGFX::SCH_PAINTER::draw(), LIB_EDIT_TOOL::Duplicate(), Duplicate(), PCB_EDIT_FRAME::Exchange_Module(), LIB_EDIT_FRAME::GetComponentFromRedoList(), LIB_EDIT_FRAME::GetComponentFromUndoList(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), FOOTPRINT_EDIT_FRAME::LoadModuleFromLibrary(), FOOTPRINT_EDIT_FRAME::OpenProjectFiles(), PCB_BASE_FRAME::PlaceModule(), LIB_PIN_TOOL::PlacePin(), DRAWING_TOOL::PlaceText(), FOOTPRINT_EDIT_FRAME::Process_Special_Functions(), BOARD_COMMIT::Push(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_PIN_TOOL::RepeatPin(), LIB_EDIT_FRAME::RollbackPartFromUndo(), SCH_EDIT_FRAME::SaveCopyForRepeatItem(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_SEXPR_PLUGIN_CACHE::savePin(), SCH_LEGACY_PLUGIN_CACHE::savePin(), EE_SELECTION_TOOL::SelectPoint(), SCH_EDIT_FRAME::SelectUnit(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ ClearSelected()

◆ ClearTempFlags()

void EDA_ITEM::ClearTempFlags ( )
inlineinherited

Definition at line 245 of file base_struct.h.

246  {
248  DO_NOT_DRAW );
249  }
#define IS_LINKED
Used in calculation to mark linked items (temporary use)
Definition: base_struct.h:114
#define TEMP_SELECTED
flag indicating that the structure has already selected
Definition: base_struct.h:125
#define SKIP_STRUCT
flag indicating that the structure should be ignored
Definition: base_struct.h:128
#define CANDIDATE
flag indicating that the structure is connected
Definition: base_struct.h:127
#define ENDPOINT
ends. (Used to support dragging.)
Definition: base_struct.h:123
void ClearFlags(STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
Definition: base_struct.h:233
#define DO_NOT_DRAW
Used to disable draw function.
Definition: base_struct.h:129
#define STARTPOINT
When a line is selected, these flags indicate which.
Definition: base_struct.h:122

References CANDIDATE, EDA_ITEM::ClearFlags(), DO_NOT_DRAW, ENDPOINT, IS_LINKED, SKIP_STRUCT, STARTPOINT, and TEMP_SELECTED.

Referenced by SCH_EDIT_FRAME::PutDataInPreviousState().

◆ ClearViewPrivData()

void KIGFX::VIEW_ITEM::ClearViewPrivData ( )
inlineinherited

Definition at line 154 of file view_item.h.

155  {
157  }
VIEW_ITEM_DATA * m_viewPrivData
Definition: view_item.h:162
#define NULL

References KIGFX::VIEW_ITEM::m_viewPrivData, and NULL.

Referenced by KIGFX::VIEW::OnDestroy().

◆ Clone()

EDA_ITEM * EDA_ITEM::Clone ( ) const
virtualinherited

Function Clone creates a duplicate of this item with linked list members set to NULL.

The default version will return NULL in release builds and likely crash the program. In debug builds, a warning message indicating the derived class has not implemented cloning. This really should be a pure virtual function. Due to the fact that there are so many objects derived from EDA_ITEM, the decision was made to return NULL until all the objects derived from EDA_ITEM implement cloning. Once that happens, this function should be made pure.

Returns
A clone of the item.

Reimplemented in MODULE_ZONE_CONTAINER, ZONE_CONTAINER, SCH_COMPONENT, MODULE, SCH_SHEET, D_PAD, SCH_HIERLABEL, VIA, SCH_GLOBALLABEL, SCH_LABEL, ARC, SCH_TEXT, LIB_PIN, DRAWSEGMENT, DIMENSION, SCH_LINE, TRACK, TEXTE_MODULE, SCH_BUS_BUS_ENTRY, SCH_SHEET_PIN, SCH_FIELD, LIB_FIELD, SCH_BUS_WIRE_ENTRY, SCH_BITMAP, EDGE_MODULE, LIB_ARC, TEXTE_PCB, SCH_NO_CONNECT, SCH_JUNCTION, LIB_POLYLINE, SCH_MARKER, LIB_TEXT, PCB_TARGET, LIB_BEZIER, LIB_CIRCLE, LIB_RECTANGLE, and KIGFX::ORIGIN_VIEWITEM.

Definition at line 110 of file base_struct.cpp.

111 {
112  wxCHECK_MSG( false, NULL, wxT( "Clone not implemented in derived class " ) + GetClass() +
113  wxT( ". Bad programmer!" ) );
114 }
#define NULL
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References EDA_ITEM::GetClass(), and NULL.

Referenced by LIB_DRAWING_TOOLS::DrawShape(), LIB_EDIT_TOOL::Duplicate(), BOARD_ITEM::Duplicate(), Duplicate(), LIB_PART::LIB_PART(), LIB_EDIT_FRAME::LoadOneSymbol(), new_clone(), LIB_PART::operator=(), LIB_EDIT_TOOL::Paste(), SCH_SEXPR_PLUGIN_CACHE::removeSymbol(), SCH_LEGACY_PLUGIN_CACHE::removeSymbol(), SCH_EDIT_FRAME::SaveCopyForRepeatItem(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), CLIPBOARD_IO::SaveSelection(), LIB_PART::SetConversion(), LIB_PART::SetUnitCount(), SCH_DRAWING_TOOLS::SingleClickPlace(), COMMIT::Stage(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ ConnectedItems()

ITEM_SET & SCH_ITEM::ConnectedItems ( const SCH_SHEET_PATH aPath)

Retrieves the set of items connected to this item on the given sheet.

Definition at line 176 of file sch_item.cpp.

177 {
178  return m_connected_items[ aSheet ];
179 }
std::unordered_map< SCH_SHEET_PATH, ITEM_SET > m_connected_items
Stores pointers to other items that are connected to this one, per sheet.
Definition: sch_item.h:199

References m_connected_items.

Referenced by SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), CONNECTION_GRAPH::buildConnectionGraph(), and CONNECTION_GRAPH::updateItemConnectivity().

◆ Connection()

◆ ConnectionPropagatesTo()

virtual bool SCH_ITEM::ConnectionPropagatesTo ( const EDA_ITEM aItem) const
inlinevirtual

Returns true if this item should propagate connection info to aItem.

Reimplemented in SCH_BUS_WIRE_ENTRY, and SCH_PIN.

Definition at line 424 of file sch_item.h.

424 { return true; }

Referenced by CONNECTION_GRAPH::updateItemConnectivity().

◆ doIsConnected()

virtual bool SCH_ITEM::doIsConnected ( const wxPoint aPosition) const
inlineprivatevirtual

Provide the object specific test to see if it is connected to aPosition.

Note
Override this function if the derived object can be connect to another object such as a wire, bus, or junction. Do not override this function for objects that cannot have connections. The default will always return false. This functions is call through the public function IsConnected() which performs tests common to all schematic items before calling the item specific connection testing.
Parameters
aPositionA reference to a wxPoint object containing the test position.
Returns
True if connection to aPosition exists.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_HIERLABEL, SCH_GLOBALLABEL, SCH_LABEL, SCH_LINE, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 513 of file sch_item.h.

513 { return false; }

Referenced by IsConnected().

◆ Duplicate()

SCH_ITEM * SCH_ITEM::Duplicate ( bool  doClone = false) const

Routine to create a new copy of given item.

The new object is not put in draw list (not linked).

Parameters
doClone(default = false) indicates unique values (such as timestamp and sheet name) should be duplicated. Use only for undo/redo operations.

Definition at line 81 of file sch_item.cpp.

82 {
83  SCH_ITEM* newItem = (SCH_ITEM*) Clone();
84 
85  if( !doClone )
86  const_cast<KIID&>( newItem->m_Uuid ) = KIID();
87 
88  newItem->ClearFlags( SELECTED | BRIGHTENED );
89 
90  if( newItem->Type() == SCH_COMPONENT_T )
91  {
92  SCH_COMPONENT* component = (SCH_COMPONENT*) newItem;
93 
94  for( SCH_PIN* pin : component->GetSchPins() )
95  pin->ClearFlags( SELECTED | BRIGHTENED );
96 
97  for( SCH_FIELD& field : component->GetFields() )
98  field.ClearFlags( SELECTED | BRIGHTENED );
99  }
100 
101  if( newItem->Type() == SCH_SHEET_T )
102  {
103  SCH_SHEET* sheet = (SCH_SHEET*) newItem;
104 
105  for( SCH_FIELD& field : sheet->GetFields() )
106  field.ClearFlags( SELECTED | BRIGHTENED );
107 
108  for( SCH_SHEET_PIN* pin : sheet->GetPins() )
109  pin->ClearFlags( SELECTED | BRIGHTENED );
110  }
111 
112  return newItem;
113 }
SCH_FIELD instances are attached to a component and provide a place for the component's value,...
Definition: sch_field.h:52
virtual EDA_ITEM * Clone() const
Function Clone creates a duplicate of this item with linked list members set to NULL.
void GetFields(std::vector< SCH_FIELD * > &aVector, bool aVisibleOnly)
Populates a std::vector with SCH_FIELDs.
std::vector< SCH_FIELD > & GetFields()
Definition: sch_sheet.h:268
#define SELECTED
Definition: base_struct.h:124
Definition: common.h:68
#define BRIGHTENED
item is drawn with a bright contour
Definition: base_struct.h:139
Define a sheet pin (label) used in sheets to create hierarchical schematics.
Definition: sch_sheet.h:84
Sheet symbol placed in a schematic, and is the entry point for a sub schematic.
Definition: sch_sheet.h:216
const KIID m_Uuid
Definition: base_struct.h:162
std::vector< SCH_SHEET_PIN * > & GetPins()
Definition: sch_sheet.h:362
Schematic symbol object.
Definition: sch_component.h:88
void ClearFlags(STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
Definition: base_struct.h:233
Base class for any item which can be embedded within the SCHEMATIC container class,...
Definition: sch_item.h:187
SCH_PIN_PTRS GetSchPins(const SCH_SHEET_PATH *aSheet=nullptr) const
Retrieves a list of the SCH_PINs for the given sheet path.
KICAD_T Type() const
Function Type()
Definition: base_struct.h:193

References BRIGHTENED, EDA_ITEM::ClearFlags(), EDA_ITEM::Clone(), SCH_SHEET::GetFields(), SCH_COMPONENT::GetFields(), SCH_SHEET::GetPins(), SCH_COMPONENT::GetSchPins(), EDA_ITEM::m_Uuid, SCH_COMPONENT_T, SCH_SHEET_T, SELECTED, and EDA_ITEM::Type().

Referenced by SCH_EDIT_TOOL::Duplicate(), SCH_EAGLE_PLUGIN::loadSchematic(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_EDIT_TOOL::RepeatDrawItem(), and SCH_EDIT_FRAME::SaveCopyInUndoList().

◆ Get() [1/3]

wxAny INSPECTABLE::Get ( PROPERTY_BASE aProperty)
inlineinherited

Definition at line 84 of file inspectable.h.

85  {
87  TYPE_ID thisType = TYPE_HASH( *this );
88  void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
89  return object ? aProperty->getter( object ) : wxAny();
90  }
static PROPERTY_MANAGER & Instance()
Definition: property_mgr.h:61
#define TYPE_HASH(x)
Macro to generate unique identifier for a type
Definition: property.h:53
size_t TYPE_ID
Unique type identifier
Definition: property_mgr.h:38
const void * TypeCast(const void *aSource, TYPE_ID aBase, TYPE_ID aTarget) const
Casts a type to another type.
virtual wxAny getter(void *aObject) const =0
Provides class metadata.
Definition: property_mgr.h:58
virtual size_t OwnerHash() const =0
Returns type-id of the Owner class.

References PROPERTY_BASE::getter(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

Referenced by CLASS_D_DESC::CLASS_D_DESC(), PCB_EXPR_VAR_REF::GetValue(), and PAD_DESC::PAD_DESC().

◆ Get() [2/3]

template<typename T >
T INSPECTABLE::Get ( PROPERTY_BASE aProperty)
inlineinherited

Definition at line 93 of file inspectable.h.

94  {
96  TYPE_ID thisType = TYPE_HASH( *this );
97  void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
98  return object ? aProperty->get<T>( object ) : T();
99  }
static PROPERTY_MANAGER & Instance()
Definition: property_mgr.h:61
#define TYPE_HASH(x)
Macro to generate unique identifier for a type
Definition: property.h:53
size_t TYPE_ID
Unique type identifier
Definition: property_mgr.h:38
const void * TypeCast(const void *aSource, TYPE_ID aBase, TYPE_ID aTarget) const
Casts a type to another type.
T
enum T contains all this lexer's tokens.
Provides class metadata.
Definition: property_mgr.h:58
T get(void *aObject)
Definition: property.h:273
virtual size_t OwnerHash() const =0
Returns type-id of the Owner class.

References PROPERTY_BASE::get(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Get() [3/3]

template<typename T >
boost::optional<T> INSPECTABLE::Get ( const wxString &  aProperty)
inlineinherited

Definition at line 102 of file inspectable.h.

103  {
105  TYPE_ID thisType = TYPE_HASH( *this );
106  PROPERTY_BASE* prop = propMgr.GetProperty( thisType, aProperty );
107  boost::optional<T> ret;
108 
109  if( prop )
110  {
111  void* object = propMgr.TypeCast( this, thisType, prop->OwnerHash() );
112 
113  if( object )
114  ret = prop->get<T>( object );
115  }
116 
117  return ret;
118  }
static PROPERTY_MANAGER & Instance()
Definition: property_mgr.h:61
#define TYPE_HASH(x)
Macro to generate unique identifier for a type
Definition: property.h:53
size_t TYPE_ID
Unique type identifier
Definition: property_mgr.h:38
const void * TypeCast(const void *aSource, TYPE_ID aBase, TYPE_ID aTarget) const
Casts a type to another type.
T
enum T contains all this lexer's tokens.
PROPERTY_BASE * GetProperty(TYPE_ID aType, const wxString &aProperty) const
Returns a property for a specific type.
Provides class metadata.
Definition: property_mgr.h:58
T get(void *aObject)
Definition: property.h:273
virtual size_t OwnerHash() const =0
Returns type-id of the Owner class.

References PROPERTY_BASE::get(), PROPERTY_MANAGER::GetProperty(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ GetBoundingBox()

const EDA_RECT EDA_ITEM::GetBoundingBox ( ) const
virtualinherited

Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes.

This box should be an enclosing perimeter for visible components of this object, and the units should be in the pcb or schematic coordinate system. It is OK to overestimate the size by a few counts.

Reimplemented in BOARD, D_PAD, SCH_HIERLABEL, SCH_SHEET, SCH_GLOBALLABEL, SCH_COMPONENT, SCH_LABEL, WS_DRAW_ITEM_BITMAP, WS_DRAW_ITEM_TEXT, SCH_TEXT, WS_DRAW_ITEM_PAGE, DRAWSEGMENT, LIB_PIN, DIMENSION, GERBER_DRAW_ITEM, LIB_PART, WS_DRAW_ITEM_RECT, LIB_ITEM, TEXTE_MODULE, WS_DRAW_ITEM_POLYPOLYGONS, MODULE, LIB_FIELD, SCH_LINE, WS_DRAW_ITEM_LINE, TRACK, TEXTE_PCB, ZONE_CONTAINER, SCH_FIELD, MARKER_PCB, WS_DRAW_ITEM_BASE, MARKER_PCB, SCH_BITMAP, PCB_TARGET, SCH_BUS_ENTRY_BASE, SCH_PIN, GBR_LAYOUT, LIB_POLYLINE, LIB_ARC, SCH_NO_CONNECT, LIB_TEXT, LIB_BEZIER, SCH_MARKER, LIB_RECTANGLE, SCH_JUNCTION, and LIB_CIRCLE.

Definition at line 97 of file base_struct.cpp.

98 {
99 #if defined(DEBUG)
100  printf( "Missing GetBoundingBox()\n" );
101  Show( 0, std::cout ); // tell me which classes still need GetBoundingBox support
102 #endif
103 
104  // return a zero-sized box per default. derived classes should override
105  // this
106  return EDA_RECT( wxPoint( 0, 0 ), wxSize( 0, 0 ) );
107 }
EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44

Referenced by CN_ITEM::BBox(), EE_RTREE::contains(), MODULE::CoverageRatio(), SELECTION::GetBoundingBox(), LIB_ITEM::GetBoundingBox(), GetBoundingBoxes(), GERBVIEW_SELECTION::GetCenter(), getRect(), EE_RTREE::insert(), SCH_EDIT_TOOL::Mirror(), SCH_EAGLE_PLUGIN::moveLabels(), EE_RTREE::remove(), GERBVIEW_SELECTION::ViewBBox(), and EDA_ITEM::ViewBBox().

◆ GetClass()

virtual wxString SCH_ITEM::GetClass ( ) const
inlineoverridevirtual

◆ GetConnectionPoints()

virtual void SCH_ITEM::GetConnectionPoints ( std::vector< wxPoint > &  aPoints) const
inlinevirtual

Add all the connection points for this item to aPoints.

Not all schematic items have connection points so the default method does nothing.

Parameters
aPointsList of connection points to add to.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_LINE, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 379 of file sch_item.h.

379 { }

Referenced by SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded(), and SCH_EDIT_TOOL::DoDelete().

◆ GetEditFlags()

STATUS_FLAGS EDA_ITEM::GetEditFlags ( ) const
inlineinherited

Definition at line 237 of file base_struct.h.

238  {
239  constexpr int mask = ( IS_NEW | IS_PASTED | IS_MOVED | IS_RESIZED | IS_DRAGGED |
241 
242  return m_Flags & mask;
243  }
#define IS_NEW
New item, just created.
Definition: base_struct.h:117
#define IS_DRAGGED
Item being dragged.
Definition: base_struct.h:119
#define STRUCT_DELETED
flag indication structures to be erased
Definition: base_struct.h:126
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:121
STATUS_FLAGS m_Flags
Definition: base_struct.h:176
#define IS_RESIZED
Item being resized.
Definition: base_struct.h:118
#define IS_PASTED
Modifier on IS_NEW which indicates it came from clipboard.
Definition: base_struct.h:130
#define IS_MOVED
Item being moved.
Definition: base_struct.h:116

References IS_DRAGGED, IS_MOVED, IS_NEW, IS_PASTED, IS_RESIZED, IS_WIRE_IMAGE, EDA_ITEM::m_Flags, and STRUCT_DELETED.

Referenced by SCH_EDIT_TOOL::ChangeTextType(), EDA_ITEM::ClearEditFlags(), SCH_EDIT_FRAME::DeleteJunction(), SCH_EDIT_TOOL::editFieldText(), LIB_PIN_TOOL::EditPinProperties(), SCH_EDITOR_CONTROL::EditWithLibEdit(), SCH_COMPONENT::GetMsgPanelInfo(), LIB_MOVE_TOOL::Main(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), PAD_TOOL::recombinePad(), SCH_EDIT_FRAME::SchematicCleanUp(), SCH_EDIT_FRAME::SelectUnit(), DIALOG_TARGET_PROPERTIES::TransferDataFromWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_LABEL_EDITOR::TransferDataFromWindow(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataFromWindow(), and SCH_EDIT_FRAME::TrimWire().

◆ GetEndPoints()

virtual void SCH_ITEM::GetEndPoints ( std::vector< DANGLING_END_ITEM > &  aItemList)
inlinevirtual

Add the schematic item end points to aItemList if the item has end points.

The default version doesn't do anything since many of the schematic object cannot be tested for dangling ends. If you add a new schematic item that can have a dangling end ( no connect ), override this method to provide the correct end points.

Parameters
aItemList- List of DANGLING_END_ITEMS to add to.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_BUS_BUS_ENTRY, SCH_SHEET_PIN, SCH_LINE, SCH_BUS_WIRE_ENTRY, SCH_JUNCTION, and SCH_NO_CONNECT.

Definition at line 339 of file sch_item.h.

339 {}

◆ GetFieldsAutoplaced()

FIELDS_AUTOPLACED SCH_ITEM::GetFieldsAutoplaced ( ) const
inline

Return whether the fields have been automatically placed.

Definition at line 435 of file sch_item.h.

435 { return m_fieldsAutoplaced; }
FIELDS_AUTOPLACED m_fieldsAutoplaced
Definition: sch_item.h:194

References m_fieldsAutoplaced.

Referenced by AutoAutoplaceFields(), and EE_POINT_EDITOR::updateItem().

◆ GetFlags()

◆ GetFocusPosition()

virtual const wxPoint EDA_ITEM::GetFocusPosition ( ) const
inlinevirtualinherited

Function GetFocusPosition similar to GetPosition, but allows items to return their visual center rather than their anchor.

Reimplemented in DRAWSEGMENT, and TRACK.

Definition at line 344 of file base_struct.h.

344 { return GetPosition(); }
virtual wxPoint GetPosition() const
Definition: base_struct.h:337

References EDA_ITEM::GetPosition().

Referenced by PCB_BASE_FRAME::FocusOnItem(), and SCH_EDIT_FRAME::FocusOnItem().

◆ GetLayer()

◆ GetMenuImage()

BITMAP_DEF EDA_ITEM::GetMenuImage ( ) const
virtualinherited

Function GetMenuImage returns a pointer to an image to be used in menus.

The default version returns the right arrow image. Override this function to provide object specific menu images.

Returns
The menu image associated with the item.

Reimplemented in ZONE_CONTAINER, SCH_COMPONENT, MODULE, SCH_SHEET, D_PAD, SCH_HIERLABEL, VIA, SCH_GLOBALLABEL, SCH_LABEL, SCH_TEXT, GERBER_DRAW_ITEM, LIB_PIN, DRAWSEGMENT, DIMENSION, TRACK, TEXTE_MODULE, SCH_BUS_BUS_ENTRY, SCH_LINE, SCH_SHEET_PIN, LIB_FIELD, SCH_FIELD, SCH_BUS_WIRE_ENTRY, EDGE_MODULE, SCH_BITMAP, LIB_ARC, TEXTE_PCB, LIB_POLYLINE, SCH_NO_CONNECT, LIB_TEXT, SCH_MARKER, PCB_TARGET, MARKER_PCB, SCH_JUNCTION, MARKER_PCB, LIB_CIRCLE, and LIB_RECTANGLE.

Definition at line 235 of file base_struct.cpp.

236 {
237  return dummy_xpm;
238 }
static const BITMAP_OPAQUE dummy_xpm[1]
Definition: base_struct.cpp:56

References dummy_xpm.

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), and SELECTION_TOOL::doSelectionMenu().

◆ GetMsgPanelInfo()

virtual void EDA_ITEM::GetMsgPanelInfo ( EDA_DRAW_FRAME aFrame,
std::vector< MSG_PANEL_ITEM > &  aList 
)
inlinevirtualinherited

◆ GetNetListItem()

virtual void SCH_ITEM::GetNetListItem ( NETLIST_OBJECT_LIST aNetListItems,
SCH_SHEET_PATH aSheetPath 
)
inlinevirtual

Create a new NETLIST_OBJECT for the schematic object and adds it to aNetListItems.

Not all schematic objects have net list items associated with them. This method only needs to be overridden for those schematic objects that have net list objects associated with them.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_LINE, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 487 of file sch_item.h.

488  { }

◆ GetParent()

◆ GetPenWidth()

virtual int SCH_ITEM::GetPenWidth ( ) const
inlinevirtual

◆ GetPosition()

virtual wxPoint EDA_ITEM::GetPosition ( ) const
inlinevirtualinherited

Reimplemented in SCH_COMPONENT, SCH_SHEET, VIA, DELETED_BOARD_ITEM, WS_DRAW_ITEM_BITMAP, SCH_TEXT, BOARD, ARC, WS_DRAW_ITEM_TEXT, LIB_PIN, WS_DRAW_ITEM_PAGE, WS_DRAW_ITEM_RECT, MODULE, SCH_LINE, GERBER_DRAW_ITEM, SCH_FIELD, LIB_FIELD, WS_DRAW_ITEM_POLYPOLYGONS, D_PAD, SCH_BITMAP, WS_DRAW_ITEM_LINE, DRAWSEGMENT, SCH_BUS_ENTRY_BASE, DIMENSION, SCH_NO_CONNECT, TRACK, KIGFX::ORIGIN_VIEWITEM, NETINFO_ITEM, SCH_MARKER, SCH_JUNCTION, TEXTE_MODULE, LIB_POLYLINE, ZONE_CONTAINER, LIB_ARC, LIB_TEXT, SCH_PIN, LIB_BEZIER, TEXTE_PCB, LIB_RECTANGLE, MARKER_PCB, MARKER_PCB, LIB_CIRCLE, and PCB_TARGET.

Definition at line 337 of file base_struct.h.

337 { return wxPoint(); }

Referenced by GRID_HELPER::computeAnchors(), SCH_EDIT_FRAME::DeleteJunction(), KIGFX::PCB_PAINTER::draw(), CONNECTION_GRAPH::ercCheckBusToBusConflicts(), CONNECTION_GRAPH::ercCheckBusToNetConflicts(), CONNECTION_GRAPH::ercCheckNoConnects(), SELECTION_TOOL::findCallback(), GERBVIEW_SELECTION::GetCenter(), BOARD_ITEM::GetCenter(), EDA_ITEM::GetFocusPosition(), SCH_FIELD::GetParentPosition(), POSITION_RELATIVE_TOOL::GetSelectionAnchorPosition(), SCH_SCREEN::GetSheets(), PCBNEW_SELECTION::GetTopLeftItem(), BOARD_ITEM::GetX(), BOARD_ITEM::GetY(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), EDIT_POINTS_FACTORY::Make(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), operator<(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PCBNEW_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceImportedGraphics(), DRAWING_TOOL::PlaceText(), BACK_ANNOTATE::processNetNameChange(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), SELECTION_TOOL::selectConnectedTracks(), RC_ITEM::ShowReport(), DRC::testDisabledLayers(), TransformItem(), DIALOG_POSITION_RELATIVE::UpdateAnchor(), LIB_MOVE_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), and EE_POINT_EDITOR::updatePoints().

◆ GetSelectMenuText()

wxString EDA_ITEM::GetSelectMenuText ( EDA_UNITS  aUnits) const
virtualinherited

Function GetSelectMenuText returns the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position.

The default version of this function raises an assertion in the debug mode and returns a string to indicate that it was not overridden to provide the object specific text.

Returns
The menu text string.

Reimplemented in ZONE_CONTAINER, SCH_COMPONENT, MODULE, BOARD, SCH_SHEET, D_PAD, SCH_HIERLABEL, VIA, SCH_GLOBALLABEL, DELETED_BOARD_ITEM, SCH_LABEL, WS_DRAW_ITEM_BITMAP, WS_DRAW_ITEM_TEXT, SCH_TEXT, LIB_PIN, GERBER_DRAW_ITEM, DRAWSEGMENT, WS_DRAW_ITEM_PAGE, DIMENSION, WS_DRAW_ITEM_RECT, TRACK, TEXTE_MODULE, SCH_BUS_BUS_ENTRY, SCH_LINE, SCH_SHEET_PIN, LIB_FIELD, WS_DRAW_ITEM_POLYPOLYGONS, SCH_FIELD, SCH_BUS_WIRE_ENTRY, WS_DRAW_ITEM_LINE, EDGE_MODULE, LIB_ARC, SCH_BITMAP, TEXTE_PCB, LIB_POLYLINE, SCH_NO_CONNECT, LIB_TEXT, PCB_TARGET, SCH_MARKER, MARKER_PCB, MARKER_PCB, LIB_CIRCLE, LIB_RECTANGLE, SCH_JUNCTION, SCH_PIN, and DELETED_SHEET_ITEM.

Definition at line 136 of file base_struct.cpp.

137 {
138  wxFAIL_MSG( wxT( "GetSelectMenuText() was not overridden for schematic item type " ) +
139  GetClass() );
140 
141  return wxString( wxT( "Undefined menu text for " ) + GetClass() );
142 }
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References EDA_ITEM::GetClass().

Referenced by CONNECTION_GRAPH::buildConnectionGraph(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), MARKER_PCB::GetMsgPanelInfo(), RC_TREE_MODEL::GetValue(), DRC_ITEM::ShowHtml(), RC_ITEM::ShowReport(), and DIALOG_POSITION_RELATIVE::UpdateAnchor().

◆ GetState()

int EDA_ITEM::GetState ( int  type) const
inlineinherited

Definition at line 216 of file base_struct.h.

217  {
218  return m_Status & type;
219  }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by TRACK::GetMsgPanelInfoBase_Common(), and TRACK::IsLocked().

◆ GetStatus()

STATUS_FLAGS EDA_ITEM::GetStatus ( ) const
inlineinherited

Definition at line 229 of file base_struct.h.

229 { return m_Status; }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by PCB_IO::format().

◆ GetStoredPos()

wxPoint& SCH_ITEM::GetStoredPos ( )
inline

Definition at line 243 of file sch_item.h.

243 { return m_storedPos; }
wxPoint m_storedPos
Definition: sch_item.h:195

References m_storedPos.

Referenced by SCH_MOVE_TOOL::moveItem().

◆ GetStroke()

virtual STROKE_PARAMS SCH_ITEM::GetStroke ( ) const
inlinevirtual

Reimplemented in SCH_LINE, and SCH_BUS_ENTRY_BASE.

Definition at line 467 of file sch_item.h.

467 { wxCHECK( false, STROKE_PARAMS() ); }
Simple container to manage line stroke parameters.
Definition: sch_item.h:153

Referenced by DIALOG_EDIT_LINE_STYLE::resetDefaults().

◆ HasFlag()

◆ HasLineStroke()

virtual bool SCH_ITEM::HasLineStroke ( ) const
inlinevirtual

Check if this schematic item has line stoke properties.

See also
STROKE_PARAMS
Returns
true if this schematic item support line stroke properties. Otherwise, false.

Reimplemented in SCH_LINE, and SCH_BUS_ENTRY_BASE.

Definition at line 465 of file sch_item.h.

465 { return false; }

Referenced by EE_SELECTION::AllItemsHaveLineStroke(), SCH_EDIT_TOOL::Init(), and SCH_EDIT_TOOL::Properties().

◆ HitTest() [1/2]

virtual bool EDA_ITEM::HitTest ( const wxPoint aPosition,
int  aAccuracy = 0 
) const
inlinevirtualinherited

◆ HitTest() [2/2]

virtual bool EDA_ITEM::HitTest ( const EDA_RECT aRect,
bool  aContained,
int  aAccuracy = 0 
) const
inlinevirtualinherited

Function HitTest tests if aRect intersects or is contained within the bounding box of an item.

Parameters
aRectA reference to a EDA_RECT object containing the rectangle to test.
aContainedSet to true to test for containment instead of an intersection.
aAccuracyIncrease aRect by this amount.
Returns
True if aRect contains or intersects the item bounding box.

Reimplemented in SCH_COMPONENT, SCH_SHEET, D_PAD, MODULE, ZONE_CONTAINER, VIA, WS_DRAW_ITEM_BITMAP, SCH_TEXT, ARC, WS_DRAW_ITEM_TEXT, GERBER_DRAW_ITEM, DRAWSEGMENT, DIMENSION, LIB_PIN, SCH_LINE, TEXTE_MODULE, LIB_ITEM, SCH_FIELD, TRACK, WS_DRAW_ITEM_POLYPOLYGONS, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, TEXTE_PCB, SCH_JUNCTION, WS_DRAW_ITEM_BASE, PCB_TARGET, LIB_POLYLINE, LIB_ARC, LIB_BEZIER, LIB_TEXT, and LIB_CIRCLE.

Definition at line 321 of file base_struct.h.

322  {
323  return false; // derived classes should override this function
324  }

◆ InitializeConnection()

SCH_CONNECTION * SCH_ITEM::InitializeConnection ( const SCH_SHEET_PATH aPath,
CONNECTION_GRAPH aGraph 
)

Creates a new connection object associated with this object.

Parameters
aPathis the sheet path to initialize

Definition at line 188 of file sch_item.cpp.

190 {
191  if( Connection( aSheet ) )
192  {
193  Connection( aSheet )->Reset();
194  Connection( aSheet )->SetSheet( aSheet );
195  return Connection( aSheet );
196  }
197 
198  auto connection = new SCH_CONNECTION( this );
199  connection->SetSheet( aSheet );
200  m_connection_map.insert( std::make_pair( aSheet, connection ) );
201  connection->SetGraph( aGraph );
202 
203  return connection;
204 }
void SetSheet(SCH_SHEET_PATH aSheet)
void Reset()
Clears connectivity information.
std::unordered_map< SCH_SHEET_PATH, SCH_CONNECTION * > m_connection_map
Stores connectivity information, per sheet.
Definition: sch_item.h:202
SCH_CONNECTION * Connection(const SCH_SHEET_PATH &aPath) const
Retrieve the connection associated with this object in the given sheet.
Definition: sch_item.cpp:150
Each graphical item can have a SCH_CONNECTION describing its logical connection (to a bus or net).

References Connection(), m_connection_map, SCH_CONNECTION::Reset(), and SCH_CONNECTION::SetSheet().

Referenced by CONNECTION_GRAPH::buildConnectionGraph().

◆ IsBrightened()

bool EDA_ITEM::IsBrightened ( ) const
inlineinherited

◆ IsConnectable()

virtual bool SCH_ITEM::IsConnectable ( ) const
inlinevirtual

◆ IsConnected()

bool SCH_ITEM::IsConnected ( const wxPoint aPoint) const

Test the item to see if it is connected to aPoint.

Parameters
aPointA reference to a wxPoint object containing the coordinates to test.
Returns
True if connection to aPoint exists.

Definition at line 141 of file sch_item.cpp.

142 {
143  if( ( m_Flags & STRUCT_DELETED ) || ( m_Flags & SKIP_STRUCT ) )
144  return false;
145 
146  return doIsConnected( aPosition );
147 }
#define SKIP_STRUCT
flag indicating that the structure should be ignored
Definition: base_struct.h:128
#define STRUCT_DELETED
flag indication structures to be erased
Definition: base_struct.h:126
STATUS_FLAGS m_Flags
Definition: base_struct.h:176
virtual bool doIsConnected(const wxPoint &aPosition) const
Provide the object specific test to see if it is connected to aPosition.
Definition: sch_item.h:513

References doIsConnected(), EDA_ITEM::m_Flags, SKIP_STRUCT, and STRUCT_DELETED.

Referenced by SCH_SCREEN::IsTerminalPoint().

◆ IsConnectivityDirty()

bool SCH_ITEM::IsConnectivityDirty ( )
inline

Definition at line 426 of file sch_item.h.

426 { return m_connectivity_dirty; }
bool m_connectivity_dirty
True if connectivity info might be out of date.
Definition: sch_item.h:205

References m_connectivity_dirty.

◆ IsDangling()

virtual bool SCH_ITEM::IsDangling ( ) const
inlinevirtual

Reimplemented in SCH_TEXT, SCH_LINE, SCH_BUS_ENTRY_BASE, and SCH_PIN.

Definition at line 363 of file sch_item.h.

363 { return false; }

◆ IsDragging()

bool EDA_ITEM::IsDragging ( ) const
inlineinherited

Definition at line 201 of file base_struct.h.

201 { return m_Flags & IS_DRAGGED; }
#define IS_DRAGGED
Item being dragged.
Definition: base_struct.h:119
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References IS_DRAGGED, and EDA_ITEM::m_Flags.

Referenced by DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC(), and KIGFX::SCH_PAINTER::setDeviceColors().

◆ IsForceVisible()

bool EDA_ITEM::IsForceVisible ( ) const
inlineinherited

Definition at line 286 of file base_struct.h.

286 { return m_forceVisible; }
bool m_forceVisible
Definition: base_struct.h:175

References EDA_ITEM::m_forceVisible.

Referenced by KIGFX::SCH_PAINTER::draw(), and SCH_FIELD::Print().

◆ IsLocked()

virtual bool SCH_ITEM::IsLocked ( ) const
inlinevirtual
Returns
bool - true if the object is locked, else false

Definition at line 262 of file sch_item.h.

262 { return false; }

Referenced by SCH_EDIT_TOOL::DeleteItemCursor().

◆ IsModified()

bool EDA_ITEM::IsModified ( ) const
inlineinherited

Definition at line 198 of file base_struct.h.

198 { return m_Flags & IS_CHANGED; }
#define IS_CHANGED
std::function passed to nested users by ref, avoids copying std::function
Definition: base_struct.h:113
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References IS_CHANGED, and EDA_ITEM::m_Flags.

Referenced by PCB_EDIT_FRAME::OpenProjectFiles().

◆ IsMovableFromAnchorPoint()

virtual bool SCH_ITEM::IsMovableFromAnchorPoint ( )
inlinevirtual
Returns
true for items which are moved with the anchor point at mouse cursor and false for items moved with no reference to anchor Usually return true for small items (labels, junctions) and false for items which can be large (hierarchical sheets, compoments)

Reimplemented in SCH_SHEET, SCH_COMPONENT, SCH_BITMAP, SCH_SHEET_PIN, and SCH_BUS_ENTRY_BASE.

Definition at line 241 of file sch_item.h.

241 { return true; }

Referenced by SCH_MOVE_TOOL::Main().

◆ IsMoving()

◆ IsNew()

◆ IsReplaceable()

virtual bool EDA_ITEM::IsReplaceable ( ) const
inlinevirtualinherited

Function IsReplaceable.

Override this method in any derived object that supports test find and replace.

Returns
True if the item has replaceable text that can be modified using the find and replace dialog.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_LABEL, SCH_TEXT, SCH_SHEET_PIN, and SCH_FIELD.

Definition at line 501 of file base_struct.h.

501 { return false; }

Referenced by EDA_ITEM::Matches().

◆ IsResized()

bool EDA_ITEM::IsResized ( ) const
inlineinherited

Definition at line 204 of file base_struct.h.

204 { return m_Flags & IS_RESIZED; }
STATUS_FLAGS m_Flags
Definition: base_struct.h:176
#define IS_RESIZED
Item being resized.
Definition: base_struct.h:118

References IS_RESIZED, and EDA_ITEM::m_Flags.

Referenced by KIGFX::SCH_PAINTER::setDeviceColors().

◆ IsSelected()

◆ IsType()

virtual bool EDA_ITEM::IsType ( const KICAD_T  aScanTypes[]) const
inlinevirtualinherited

Function IsType Checks whether the item is one of the listed types.

Parameters
aScanTypesList of item types
Returns
true if the item type is contained in the list aScanTypes

Reimplemented in VIA, SCH_LABEL, DIMENSION, D_PAD, DRAWSEGMENT, TEXTE_MODULE, SCH_FIELD, SCH_LINE, EDGE_MODULE, and TEXTE_PCB.

Definition at line 262 of file base_struct.h.

263  {
264  if( aScanTypes[0] == SCH_LOCATE_ANY_T )
265  return true;
266 
267  for( const KICAD_T* p = aScanTypes; *p != EOT; ++p )
268  {
269  if( m_StructType == *p )
270  return true;
271  }
272 
273  return false;
274  }
KICAD_T m_StructType
Run time identification, keep private so it can never be changed after a constructor sets it.
Definition: base_struct.h:170
search types array terminator (End Of Types)
Definition: typeinfo.h:82
KICAD_T
Enum KICAD_T is the set of class identification values, stored in EDA_ITEM::m_StructType.
Definition: typeinfo.h:78

References EOT, EDA_ITEM::m_StructType, and SCH_LOCATE_ANY_T.

Referenced by SCH_LINE_WIRE_BUS_TOOL::IsDrawingBus(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLine(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingWire(), TEXTE_PCB::IsType(), EDGE_MODULE::IsType(), SCH_LINE::IsType(), SCH_FIELD::IsType(), TEXTE_MODULE::IsType(), DRAWSEGMENT::IsType(), D_PAD::IsType(), DIMENSION::IsType(), SCH_LABEL::IsType(), VIA::IsType(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), EE_SELECTION_TOOL::RequestSelection(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), EDA_ITEM::Visit(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ IsWireImage()

bool EDA_ITEM::IsWireImage ( ) const
inlineinherited

Definition at line 202 of file base_struct.h.

202 { return m_Flags & IS_WIRE_IMAGE; }
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:121
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References IS_WIRE_IMAGE, and EDA_ITEM::m_Flags.

◆ IterateForward() [1/2]

template<class T >
static SEARCH_RESULT EDA_ITEM::IterateForward ( std::deque< T > &  aList,
INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
inlinestaticinherited

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

This changes first parameter to avoid the DList and use the main queue instead

Definition at line 383 of file base_struct.h.

387  {
388  for( auto it : aList )
389  {
390  if( static_cast<EDA_ITEM*>( it )->Visit( inspector, testData, scanTypes )
392  return SEARCH_RESULT::QUIT;
393  }
394 
396  }
virtual SEARCH_RESULT Visit(INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
Function Visit may be re-implemented for each derived class in order to handle all the types given by...

References CONTINUE, QUIT, and EDA_ITEM::Visit().

Referenced by GERBER_FILE_IMAGE::Visit(), and BOARD::Visit().

◆ IterateForward() [2/2]

template<class T >
static SEARCH_RESULT EDA_ITEM::IterateForward ( std::vector< T > &  aList,
INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
inlinestaticinherited

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

This changes first parameter to avoid the DList and use std::vector instead

Definition at line 404 of file base_struct.h.

406  {
407  for( auto it : aList )
408  {
409  if( static_cast<EDA_ITEM*>( it )->Visit( inspector, testData, scanTypes )
411  return SEARCH_RESULT::QUIT;
412  }
413 
415  }
virtual SEARCH_RESULT Visit(INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
Function Visit may be re-implemented for each derived class in order to handle all the types given by...

References CONTINUE, QUIT, and EDA_ITEM::Visit().

◆ Matches() [1/2]

virtual bool EDA_ITEM::Matches ( wxFindReplaceData &  aSearchData,
void *  aAuxData 
)
inlinevirtualinherited

Function Matches compares the item against the search criteria in aSearchData.

The base class returns false since many of the objects derived from EDA_ITEM do not have any text to search.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search criteria.
aAuxDataA pointer to optional data required for the search or NULL if not used.
Returns
True if the item's text matches the search criteria in aSearchData.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_SHEET_PIN, SCH_FIELD, SCH_PIN, TEXTE_MODULE, SCH_MARKER, MARKER_PCB, MARKER_PCB, and TEXTE_PCB.

Definition at line 457 of file base_struct.h.

458  {
459  return false;
460  }

Referenced by SCH_EDITOR_CONTROL::HasMatch(), TEXTE_PCB::Matches(), MARKER_PCB::Matches(), SCH_MARKER::Matches(), TEXTE_MODULE::Matches(), SCH_PIN::Matches(), SCH_FIELD::Matches(), SCH_SHEET_PIN::Matches(), SCH_TEXT::Matches(), and SCH_EDITOR_CONTROL::ReplaceAndFindNext().

◆ Matches() [2/2]

bool EDA_ITEM::Matches ( const wxString &  aText,
wxFindReplaceData &  aSearchData 
)
protectedinherited

Function Matches compares aText against search criteria in aSearchData.

This is a helper function for simplify derived class logic.

Parameters
aTextA reference to a wxString object containing the string to test.
aSearchDataThe criteria to search against.
Returns
True if aText matches the search criteria in aSearchData.

Definition at line 145 of file base_struct.cpp.

146 {
147  wxString text = aText;
148  wxString searchText = aSearchData.GetFindString();
149 
150  // Don't match if searching for replaceable item and the item doesn't support text replace.
151  if( (aSearchData.GetFlags() & FR_SEARCH_REPLACE) && !IsReplaceable() )
152  return false;
153 
154  if( aSearchData.GetFlags() & wxFR_WHOLEWORD )
155  return aText.IsSameAs( searchText, aSearchData.GetFlags() & wxFR_MATCHCASE );
156 
157  if( aSearchData.GetFlags() & FR_MATCH_WILDCARD )
158  {
159  if( aSearchData.GetFlags() & wxFR_MATCHCASE )
160  return text.Matches( searchText );
161 
162  return text.MakeUpper().Matches( searchText.MakeUpper() );
163  }
164 
165  if( aSearchData.GetFlags() & wxFR_MATCHCASE )
166  return aText.Find( searchText ) != wxNOT_FOUND;
167 
168  return text.MakeUpper().Find( searchText.MakeUpper() ) != wxNOT_FOUND;
169 }
virtual bool IsReplaceable() const
Function IsReplaceable.
Definition: base_struct.h:501

References FR_MATCH_WILDCARD, FR_SEARCH_REPLACE, and EDA_ITEM::IsReplaceable().

◆ MirrorX()

virtual void SCH_ITEM::MirrorX ( int  aXaxis_position)
pure virtual

Mirror item relative to the X axis about aXaxis_position.

Parameters
aXaxis_positionThe X axis position to mirror around.

Implemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_SHEET_PIN, SCH_FIELD, SCH_LINE, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, DELETED_SHEET_ITEM, SCH_MARKER, SCH_PIN, and SCH_JUNCTION.

Referenced by SCH_EDIT_TOOL::Mirror(), and SCH_EDIT_FRAME::PutDataInPreviousState().

◆ MirrorY()

virtual void SCH_ITEM::MirrorY ( int  aYaxis_position)
pure virtual

Mirror item relative to the Y axis about aYaxis_position.

Parameters
aYaxis_positionThe Y axis position to mirror around.

Implemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_SHEET_PIN, SCH_FIELD, SCH_LINE, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, DELETED_SHEET_ITEM, SCH_MARKER, SCH_PIN, and SCH_JUNCTION.

Referenced by SCH_EDIT_TOOL::Mirror(), and SCH_EDIT_FRAME::PutDataInPreviousState().

◆ Move()

virtual void SCH_ITEM::Move ( const wxPoint aMoveVector)
pure virtual

Move the item by aMoveVector to a new position.

Parameters
aMoveVector= the displacement vector

Implemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_SHEET_PIN, SCH_LINE, SCH_FIELD, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, DELETED_SHEET_ITEM, SCH_PIN, SCH_MARKER, and SCH_JUNCTION.

Referenced by SCH_EDIT_FRAME::PutDataInPreviousState(), and SCH_EDIT_TOOL::RepeatDrawItem().

◆ NetClass()

NETCLASSPTR SCH_ITEM::NetClass ( ) const

Definition at line 160 of file sch_item.cpp.

161 {
162  if( m_connection_map.size() )
163  {
164  NET_SETTINGS& netSettings = Schematic()->Prj().GetProjectFile().NetSettings();
165  const wxString& netname = m_connection_map.begin()->second->Name( true );
166  const wxString& netclassName = netSettings.m_NetClassAssignments[ netname ];
167 
168  if( !netclassName.IsEmpty() )
169  return netSettings.m_NetClasses.Find( netclassName );
170  }
171 
172  return nullptr;
173 }
std::map< wxString, wxString > m_NetClassAssignments
Definition: net_settings.h:43
NETCLASSPTR Find(const wxString &aName) const
Function Find searches this container for a NETCLASS given by aName.
Definition: netclass.cpp:132
SCHEMATIC * Schematic() const
Searches the item hierarchy to find a SCHEMATIC.
Definition: sch_item.cpp:116
NET_SETTINGS & NetSettings()
Definition: project_file.h:92
NETCLASSES m_NetClasses
Definition: net_settings.h:39
VTBL_ENTRY PROJECT_FILE & GetProjectFile() const
Definition: project.h:137
NET_SETTINGS stores various net-related settings in a project context.
Definition: net_settings.h:31
std::unordered_map< SCH_SHEET_PATH, SCH_CONNECTION * > m_connection_map
Stores connectivity information, per sheet.
Definition: sch_item.h:202
PROJECT & Prj() const
Return a reference to the project this schematic is part of.
Definition: schematic.h:77

References NETCLASSES::Find(), PROJECT::GetProjectFile(), m_connection_map, NET_SETTINGS::m_NetClassAssignments, NET_SETTINGS::m_NetClasses, PROJECT_FILE::NetSettings(), SCHEMATIC::Prj(), and Schematic().

Referenced by SCH_JUNCTION::GetColor(), SCH_JUNCTION::GetDiameter(), SCH_LINE::GetEffectiveLineStyle(), SCH_LINE::GetLineColor(), SCH_BUS_WIRE_ENTRY::GetPenWidth(), SCH_LINE::GetPenWidth(), SCH_BUS_BUS_ENTRY::GetPenWidth(), SCH_BUS_ENTRY_BASE::GetStrokeColor(), and SCH_BUS_ENTRY_BASE::GetStrokeStyle().

◆ operator<() [1/2]

bool SCH_ITEM::operator< ( const SCH_ITEM aItem) const
virtual

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_LINE, SCH_FIELD, SCH_BUS_ENTRY_BASE, and SCH_JUNCTION.

Definition at line 213 of file sch_item.cpp.

214 {
215  if( Type() != aItem.Type() )
216  return Type() < aItem.Type();
217 
218  if( m_Uuid != aItem.m_Uuid )
219  return m_Uuid < aItem.m_Uuid;
220 
221  if( GetPosition().x != aItem.GetPosition().x )
222  return GetPosition().x < aItem.GetPosition().x;
223 
224  return GetPosition().y < aItem.GetPosition().y;
225 }
virtual wxPoint GetPosition() const
Definition: base_struct.h:337
const KIID m_Uuid
Definition: base_struct.h:162
KICAD_T Type() const
Function Type()
Definition: base_struct.h:193

References EDA_ITEM::GetPosition(), EDA_ITEM::m_Uuid, EDA_ITEM::Type(), wxPoint::x, and wxPoint::y.

◆ operator<() [2/2]

bool EDA_ITEM::operator< ( const EDA_ITEM aItem) const
inherited

Test if another item is less than this object.

Parameters
aItem- Item to compare against.
Returns
- True if aItem is less than the item.

Definition at line 199 of file base_struct.cpp.

200 {
201  wxFAIL_MSG( wxString::Format( wxT( "Less than operator not defined for item type %s." ),
202  GetChars( GetClass() ) ) );
203 
204  return false;
205 }
static const wxChar * GetChars(const wxString &s)
Function GetChars returns a wxChar* to the actual wxChar* data within a wxString, and is helpful for ...
Definition: macros.h:153
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void Format(OUTPUTFORMATTER *out, int aNestLevel, int aCtl, CPTREE &aTree)
Function Format outputs a PTREE into s-expression format via an OUTPUTFORMATTER derivative.
Definition: ptree.cpp:205

References Format(), GetChars(), and EDA_ITEM::GetClass().

◆ Plot()

void SCH_ITEM::Plot ( PLOTTER aPlotter)
virtual

Plot the schematic item to aPlotter.

Parameters
aPlotterA pointer to a PLOTTER object.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_LINE, SCH_FIELD, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, SCH_JUNCTION, and SCH_MARKER.

Definition at line 228 of file sch_item.cpp.

229 {
230  wxFAIL_MSG( wxT( "Plot() method not implemented for class " ) + GetClass() );
231 }
virtual wxString GetClass() const override
Function GetClass returns the class name.
Definition: sch_item.h:214

References GetClass().

◆ Print()

virtual void SCH_ITEM::Print ( RENDER_SETTINGS aSettings,
const wxPoint aOffset 
)
pure virtual

Print a schematic item.

Each schematic item should have its own method

Parameters
aOffsetdrawing offset (usually {0,0} but can be different when moving an object)

Implemented in SCH_COMPONENT, SCH_SHEET, SCH_HIERLABEL, SCH_GLOBALLABEL, SCH_TEXT, SCH_LINE, SCH_FIELD, SCH_SHEET_PIN, SCH_BITMAP, SCH_BUS_ENTRY_BASE, DELETED_SHEET_ITEM, SCH_NO_CONNECT, SCH_PIN, SCH_JUNCTION, and SCH_MARKER.

◆ Replace() [1/2]

bool EDA_ITEM::Replace ( wxFindReplaceData &  aSearchData,
wxString &  aText 
)
staticinherited

Helper function used in search and replace dialog Function Replace performs a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search and replace criteria.
aTextA reference to a wxString object containing the text to be replaced.
Returns
True if aText was modified, otherwise false.

Definition at line 172 of file base_struct.cpp.

173 {
174  wxString searchString = (aSearchData.GetFlags() & wxFR_MATCHCASE) ? aText : aText.Upper();
175 
176  int result = searchString.Find( (aSearchData.GetFlags() & wxFR_MATCHCASE) ?
177  aSearchData.GetFindString() :
178  aSearchData.GetFindString().Upper() );
179 
180  if( result == wxNOT_FOUND )
181  return false;
182 
183  wxString prefix = aText.Left( result );
184  wxString suffix;
185 
186  if( aSearchData.GetFindString().length() + result < aText.length() )
187  suffix = aText.Right( aText.length() - ( aSearchData.GetFindString().length() + result ) );
188 
189  wxLogTrace( traceFindReplace, wxT( "Replacing '%s', prefix '%s', replace '%s', suffix '%s'." ),
190  GetChars( aText ), GetChars( prefix ), GetChars( aSearchData.GetReplaceString() ),
191  GetChars( suffix ) );
192 
193  aText = prefix + aSearchData.GetReplaceString() + suffix;
194 
195  return true;
196 }
const wxChar *const traceFindReplace
Flag to enable find and replace debug tracing.
static const wxChar * GetChars(const wxString &s)
Function GetChars returns a wxChar* to the actual wxChar* data within a wxString, and is helpful for ...
Definition: macros.h:153

References GetChars(), and traceFindReplace.

Referenced by SCH_FIELD::Replace(), EDA_TEXT::Replace(), and SCH_EDITOR_CONTROL::ReplaceAndFindNext().

◆ Replace() [2/2]

virtual bool EDA_ITEM::Replace ( wxFindReplaceData &  aSearchData,
void *  aAuxData = NULL 
)
inlinevirtualinherited

Function Replace performs a text replace using the find and replace criteria in aSearchData on items that support text find and replace.

This function must be overridden for items that support text replace.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search and replace criteria.
aAuxDataA pointer to optional data required for the search or NULL if not used.
Returns
True if the item text was modified, otherwise false.

Reimplemented in SCH_TEXT, SCH_SHEET_PIN, SCH_FIELD, and SCH_PIN.

Definition at line 489 of file base_struct.h.

489 { return false; }

◆ Rotate()

virtual void SCH_ITEM::Rotate ( wxPoint  aPosition)
pure virtual

Rotate the item around aPosition 90 degrees in the clockwise direction.

Parameters
aPositionA reference to a wxPoint object containing the coordinates to rotate around.

Implemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_SHEET_PIN, SCH_LINE, SCH_FIELD, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, DELETED_SHEET_ITEM, SCH_MARKER, SCH_PIN, and SCH_JUNCTION.

Referenced by SCH_EDIT_FRAME::PutDataInPreviousState(), and SCH_EDIT_TOOL::Rotate().

◆ Schematic()

SCHEMATIC * SCH_ITEM::Schematic ( ) const

Searches the item hierarchy to find a SCHEMATIC.

Every SCH_ITEM that lives on a SCH_SCREEN should be parented to either that screen or another SCH_ITEM on the same screen (for example, pins to their components).

Every SCH_SCREEN should be parented to the SCHEMATIC. Note that this hierarchy is not the same as the sheet hierarchy!

Returns
the parent schematic this item lives on, or nullptr

Definition at line 116 of file sch_item.cpp.

117 {
118  EDA_ITEM* parent = GetParent();
119 
120  while( parent )
121  {
122  if( parent->Type() == SCHEMATIC_T )
123  return static_cast<SCHEMATIC*>( parent );
124  else
125  parent = parent->GetParent();
126  }
127 
128  return nullptr;
129 }
EDA_ITEM * GetParent() const
Definition: base_struct.h:195
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: base_struct.h:159
KICAD_T Type() const
Function Type()
Definition: base_struct.h:193

References EDA_ITEM::GetParent(), SCHEMATIC_T, and EDA_ITEM::Type().

Referenced by SCH_EDIT_FRAME::CreateSheetPin(), DIALOG_SCH_EDIT_ONE_FIELD::DIALOG_SCH_EDIT_ONE_FIELD(), SCH_JUNCTION::GetBoundingBox(), SCH_MARKER::GetColorLayer(), SCH_JUNCTION::GetDiameter(), SCH_LINE::GetMsgPanelInfo(), SCH_TEXT::GetMsgPanelInfo(), SCH_BUS_WIRE_ENTRY::GetPenWidth(), SCH_LINE::GetPenWidth(), SCH_BUS_BUS_ENTRY::GetPenWidth(), SCH_COMPONENT::GetSchPins(), SCH_FIELD::GetShownText(), SCH_TEXT::GetShownText(), SCH_SHEET::IsRootSheet(), SCH_LABEL::IsType(), NetClass(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnAddField(), DIALOG_LABEL_EDITOR::onScintillaCharAdded(), DIALOG_SCH_EDIT_ONE_FIELD::onScintillaCharAdded(), SCH_JUNCTION::Plot(), SCH_JUNCTION::Print(), SCH_HIERLABEL::Print(), SCH_SHEET::ResolveTextVar(), DIALOG_SCH_EDIT_ONE_FIELD::UpdateField(), and SCH_MARKER::ViewGetLayers().

◆ Set() [1/3]

bool INSPECTABLE::Set ( PROPERTY_BASE aProperty,
wxAny &  aValue 
)
inlineinherited

Definition at line 40 of file inspectable.h.

41  {
43  TYPE_ID thisType = TYPE_HASH( *this );
44  void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
45 
46  if( object )
47  aProperty->setter( object, aValue );
48 
49  return object != nullptr;
50  }
static PROPERTY_MANAGER & Instance()
Definition: property_mgr.h:61
#define TYPE_HASH(x)
Macro to generate unique identifier for a type
Definition: property.h:53
size_t TYPE_ID
Unique type identifier
Definition: property_mgr.h:38
const void * TypeCast(const void *aSource, TYPE_ID aBase, TYPE_ID aTarget) const
Casts a type to another type.
virtual void setter(void *aObject, wxAny &aValue)=0
Provides class metadata.
Definition: property_mgr.h:58
virtual size_t OwnerHash() const =0
Returns type-id of the Owner class.

References PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_BASE::setter(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Set() [2/3]

template<typename T >
bool INSPECTABLE::Set ( PROPERTY_BASE aProperty,
aValue 
)
inlineinherited

Definition at line 53 of file inspectable.h.

54  {
56  TYPE_ID thisType = TYPE_HASH( *this );
57  void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
58 
59  if( object )
60  aProperty->set<T>( object, aValue );
61 
62  return object != nullptr;
63  }
static PROPERTY_MANAGER & Instance()
Definition: property_mgr.h:61
#define TYPE_HASH(x)
Macro to generate unique identifier for a type
Definition: property.h:53
size_t TYPE_ID
Unique type identifier
Definition: property_mgr.h:38
const void * TypeCast(const void *aSource, TYPE_ID aBase, TYPE_ID aTarget) const
Casts a type to another type.
T
enum T contains all this lexer's tokens.
Provides class metadata.
Definition: property_mgr.h:58
void set(void *aObject, T aValue)
Definition: property.h:266
virtual size_t OwnerHash() const =0
Returns type-id of the Owner class.

References PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_BASE::set(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Set() [3/3]

template<typename T >
bool INSPECTABLE::Set ( const wxString &  aProperty,
aValue 
)
inlineinherited

Definition at line 66 of file inspectable.h.

67  {
69  TYPE_ID thisType = TYPE_HASH( *this );
70  PROPERTY_BASE* prop = propMgr.GetProperty( thisType, aProperty );
71  void* object = nullptr;
72 
73  if( prop )
74  {
75  object = propMgr.TypeCast( this, thisType, prop->OwnerHash() );
76 
77  if( object )
78  prop->set<T>( object, aValue );
79  }
80 
81  return object != nullptr;
82  }
static PROPERTY_MANAGER & Instance()
Definition: property_mgr.h:61
#define TYPE_HASH(x)
Macro to generate unique identifier for a type
Definition: property.h:53
size_t TYPE_ID
Unique type identifier
Definition: property_mgr.h:38
const void * TypeCast(const void *aSource, TYPE_ID aBase, TYPE_ID aTarget) const
Casts a type to another type.
T
enum T contains all this lexer's tokens.
PROPERTY_BASE * GetProperty(TYPE_ID aType, const wxString &aProperty) const
Returns a property for a specific type.
Provides class metadata.
Definition: property_mgr.h:58
void set(void *aObject, T aValue)
Definition: property.h:266
virtual size_t OwnerHash() const =0
Returns type-id of the Owner class.

References PROPERTY_MANAGER::GetProperty(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_BASE::set(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ SetBrightened()

void EDA_ITEM::SetBrightened ( )
inlineinherited

◆ SetConnectivityDirty()

void SCH_ITEM::SetConnectivityDirty ( bool  aDirty = true)
inline

Definition at line 428 of file sch_item.h.

428 { m_connectivity_dirty = aDirty; }
bool m_connectivity_dirty
True if connectivity info might be out of date.
Definition: sch_item.h:205

References m_connectivity_dirty.

Referenced by SCH_EDIT_FRAME::SaveCopyInUndoList().

◆ SetFlags()

void EDA_ITEM::SetFlags ( STATUS_FLAGS  aMask)
inlineinherited

Definition at line 232 of file base_struct.h.

232 { m_Flags |= aMask; }
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References EDA_ITEM::m_Flags.

Referenced by SCH_EAGLE_PLUGIN::addBusEntries(), PCB_BASE_FRAME::AddModuleToBoard(), PCBNEW_CONTROL::AppendBoard(), SCH_EDIT_TOOL::ChangeTextType(), GRAPHICS_CLEANER::cleanupSegments(), TRACKS_CLEANER::cleanupSegments(), SCH_EDIT_FRAME::ConvertPart(), SCH_DRAWING_TOOLS::createNewText(), LIB_PIN_TOOL::CreatePin(), SCH_EDIT_FRAME::CreateSheetPin(), SCH_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), KIGFX::SCH_PAINTER::draw(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), DRAWING_TOOL::DrawRectangle(), LIB_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_EDIT_TOOL::Duplicate(), LIB_EDIT_FRAME::GetComponentFromRedoList(), LIB_EDIT_FRAME::GetComponentFromUndoList(), SCH_MOVE_TOOL::getConnectedDragItems(), EDIT_POINTS_FACTORY::Make(), TRACKS_CLEANER::mergeCollinearSegments(), LIB_MOVE_TOOL::moveItem(), SCH_MOVE_TOOL::moveItem(), KIGFX::ORIGIN_VIEWITEM::ORIGIN_VIEWITEM(), LIB_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), DRAWING_TOOL::PlaceText(), BACK_ANNOTATE::processNetNameChange(), SCH_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_PIN_TOOL::RepeatPin(), LIB_EDIT_FRAME::SaveCopyInUndoList(), EE_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectPoint(), SCH_EDIT_FRAME::SelectUnit(), EDA_ITEM::SetBrightened(), EDA_ITEM::SetModified(), EDA_ITEM::SetSelected(), EDA_ITEM::SetWireImage(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_LINE_WIRE_BUS_TOOL::startSegments(), WS_DATA_ITEM::SyncDrawItems(), WS_DATA_ITEM_TEXT::SyncDrawItems(), DIALOG_TARGET_PROPERTIES::TransferDataFromWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ SetForceVisible()

void EDA_ITEM::SetForceVisible ( bool  aEnable)
inlineinherited

Function SetForceVisible is used to set and cleag force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible.

Parameters
aEnableTrue forces the item to be drawn. False uses the item's visibility setting to determine if the item is to be drawn.

Definition at line 284 of file base_struct.h.

284 { m_forceVisible = aEnable; }
bool m_forceVisible
Definition: base_struct.h:175

References EDA_ITEM::m_forceVisible.

◆ SetLayer()

void SCH_ITEM::SetLayer ( SCH_LAYER_ID  aLayer)
inline

Set the layer this item is on.

Parameters
aLayerThe layer number.

Definition at line 279 of file sch_item.h.

279 { m_Layer = aLayer; }
SCH_LAYER_ID m_Layer
Definition: sch_item.h:192

References m_Layer.

Referenced by PANEL_EESCHEMA_COLOR_SETTINGS::createPreviewItems(), KIGFX::SCH_PAINTER::draw(), SCH_NO_CONNECT::SCH_NO_CONNECT(), SCH_FIELD::SetId(), and CONNECTION_GRAPH::updateItemConnectivity().

◆ SetLocked()

virtual void SCH_ITEM::SetLocked ( bool  aLocked)
inlinevirtual

Set the 'lock' status to aLocked for of this item.

Definition at line 267 of file sch_item.h.

267 {}

◆ SetModified()

void EDA_ITEM::SetModified ( )
inherited

Definition at line 87 of file base_struct.cpp.

88 {
90 
91  // If this a child object, then the parent modification state also needs to be set.
92  if( m_Parent )
94 }
void SetModified()
Definition: base_struct.cpp:87
EDA_ITEM * m_Parent
Linked list: Link (parent struct)
Definition: base_struct.h:174
#define IS_CHANGED
std::function passed to nested users by ref, avoids copying std::function
Definition: base_struct.h:113
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:232

References IS_CHANGED, EDA_ITEM::m_Parent, EDA_ITEM::SetFlags(), and EDA_ITEM::SetModified().

Referenced by SCH_COMPONENT::ClearAnnotation(), LIB_PIN_TOOL::EditPinProperties(), LEGACY_PLUGIN::loadZONE_CONTAINER(), SCH_LINE::Move(), SCH_COMPONENT::Move(), SCH_LINE::MoveEnd(), SCH_LINE::MoveStart(), LIB_PIN::MoveTo(), PCB_EDIT_FRAME::OpenProjectFiles(), ALTIUM_PCB::Parse(), LIB_PART::RemoveDrawItem(), SCH_COMPONENT::SetConvert(), SCH_COMPONENT::SetLibId(), EDA_ITEM::SetModified(), LIB_FIELD::SetName(), SCH_COMPONENT::SetTransform(), and SCH_COMPONENT::SetUnit().

◆ SetParent()

virtual void EDA_ITEM::SetParent ( EDA_ITEM aParent)
inlinevirtualinherited

Definition at line 196 of file base_struct.h.

196 { m_Parent = aParent; }
EDA_ITEM * m_Parent
Linked list: Link (parent struct)
Definition: base_struct.h:174

References EDA_ITEM::m_Parent.

Referenced by MODULE::Add(), BOARD::Add(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), BOARD_NETLIST_UPDATER::addNewComponent(), SCH_SHEET::AddPin(), LIB_CONTROL::AddSymbolToSchematic(), SCH_SCREEN::Append(), LIB_FIELD::Copy(), LIB_EDIT_FRAME::CreateNewPart(), SCH_DRAWING_TOOLS::createNewText(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), SCH_EDIT_TOOL::Duplicate(), PCB_EDIT_FRAME::Exchange_Module(), LIB_PART::Flatten(), PCB_IO::FootprintSave(), DISPLAY_FOOTPRINTS_FRAME::GetModule(), LIB_PART::LIB_PART(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), SCH_LEGACY_PLUGIN_CACHE::loadAliases(), SCH_SEXPR_PLUGIN::loadHierarchy(), SCH_LEGACY_PLUGIN::loadHierarchy(), LIB_EDIT_FRAME::LoadOneSymbol(), MODULE::MODULE(), MODULE::operator=(), LIB_PART::operator=(), PCB_PARSER::parseMODULE_unchecked(), SCH_SEXPR_PARSER::ParseSchematic(), SCH_SEXPR_PARSER::ParseSymbol(), LIB_EDIT_TOOL::Paste(), PCBNEW_CONTROL::Paste(), SCH_EDITOR_CONTROL::Paste(), pasteModuleItemsToModEdit(), SCH_DRAWING_TOOLS::PlaceComponent(), PCB_EDITOR_CONTROL::PlaceModule(), BACK_ANNOTATE::processNetNameChange(), BOARD_COMMIT::Push(), SCH_SEXPR_PLUGIN_CACHE::removeSymbol(), SCH_LEGACY_PLUGIN_CACHE::removeSymbol(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SaveCopyOfZones(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_SHEET_PIN::SCH_SHEET_PIN(), LIB_PART::SetFields(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_SHEET::SwapData(), SCH_COMPONENT::SwapData(), SwapItemData(), and DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::UpdateFieldsFromLibrary().

◆ SetPosition()

virtual void SCH_ITEM::SetPosition ( const wxPoint aPosition)
pure virtual

Set the schematic item position to aPosition.

Parameters
aPositionA reference to a wxPoint object containing the new position.

Implemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_LINE, SCH_SHEET_PIN, SCH_FIELD, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, SCH_MARKER, SCH_JUNCTION, SCH_PIN, and DELETED_SHEET_ITEM.

Referenced by SCH_DRAWING_TOOLS::SingleClickPlace().

◆ SetSelected()

◆ SetState()

void EDA_ITEM::SetState ( int  type,
int  state 
)
inlineinherited

Definition at line 221 of file base_struct.h.

222  {
223  if( state )
224  m_Status |= type; // state = ON or OFF
225  else
226  m_Status &= ~type;
227  }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by LEGACY_PLUGIN::loadTrackList(), TRACKS_CLEANER::mergeCollinearSegments(), SELECTION_TOOL::selectConnectedTracks(), and TRACK::SetLocked().

◆ SetStatus()

void EDA_ITEM::SetStatus ( STATUS_FLAGS  aStatus)
inlineinherited

Definition at line 230 of file base_struct.h.

230 { m_Status = aStatus; }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by BOARD_NETLIST_UPDATER::UpdateNetlist().

◆ SetStoredPos()

void SCH_ITEM::SetStoredPos ( wxPoint  aPos)
inline

Definition at line 244 of file sch_item.h.

244 { m_storedPos = aPos; }
wxPoint m_storedPos
Definition: sch_item.h:195

References m_storedPos.

Referenced by SCH_MOVE_TOOL::Main(), and SCH_MOVE_TOOL::moveItem().

◆ SetStroke()

virtual void SCH_ITEM::SetStroke ( const STROKE_PARAMS aStroke)
inlinevirtual

Reimplemented in SCH_LINE, and SCH_BUS_ENTRY_BASE.

Definition at line 469 of file sch_item.h.

469 { wxCHECK( false, /* void */ ); }

◆ SetWireImage()

void EDA_ITEM::SetWireImage ( )
inlineinherited

Definition at line 207 of file base_struct.h.

207 { SetFlags( IS_WIRE_IMAGE ); }
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:232
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:121

References IS_WIRE_IMAGE, and EDA_ITEM::SetFlags().

◆ Sort()

static bool EDA_ITEM::Sort ( const EDA_ITEM aLeft,
const EDA_ITEM aRight 
)
inlinestaticinherited

Function Sort is a helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers.

Parameters
aLeftThe left hand item to compare.
aRightThe right hand item to compare.
Returns
True if aLeft is less than aRight.

Definition at line 520 of file base_struct.h.

520 { return *aLeft < *aRight; }

◆ SwapData()

void SCH_ITEM::SwapData ( SCH_ITEM aItem)
virtual

Swap the internal data structures aItem with the schematic item.

Obviously, aItem must have the same type than me

Parameters
aItemThe item to swap the data structures with.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_LINE, SCH_FIELD, SCH_SHEET_PIN, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, SCH_JUNCTION, and SCH_MARKER.

Definition at line 207 of file sch_item.cpp.

208 {
209  wxFAIL_MSG( wxT( "SwapData() method not implemented for class " ) + GetClass() );
210 }
virtual wxString GetClass() const override
Function GetClass returns the class name.
Definition: sch_item.h:214

References GetClass().

Referenced by SCH_EDIT_FRAME::PutDataInPreviousState().

◆ Type()

KICAD_T EDA_ITEM::Type ( ) const
inlineinherited

Function Type()

returns the type of object. This attribute should never be changed after a constructor sets it, so there is no public "setter" method.

Returns
KICAD_T - the type of object.

Definition at line 193 of file base_struct.h.

193 { return m_StructType; }
KICAD_T m_StructType
Run time identification, keep private so it can never be changed after a constructor sets it.
Definition: base_struct.h:170

References EDA_ITEM::m_StructType.

Referenced by MODULE::Add(), CN_CONNECTIVITY_ALGO::Add(), BOARD::Add(), CN_CLUSTER::Add(), POINT_EDITOR::addCorner(), CONNECTION_SUBGRAPH::AddItem(), SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded(), ZONE_FILLER::addKnockout(), SCH_SHEET::AddPin(), ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), CN_ITEM::AnchorCount(), SCH_SCREEN::Append(), CONNECTION_GRAPH::buildConnectionGraph(), DIALOG_SELECT_NET_FROM_LIST::buildNetsList(), SCH_SCREENS::buildScreenList(), calcArea(), calcMaxArea(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), POINT_EDITOR::canAddCorner(), SCH_JUNCTION::CanConnect(), SCH_NO_CONNECT::CanConnect(), SCH_BUS_WIRE_ENTRY::CanConnect(), SCH_BUS_BUS_ENTRY::CanConnect(), SCH_LINE::CanConnect(), SCH_LABEL::CanConnect(), SCH_GLOBALLABEL::CanConnect(), SCH_HIERLABEL::CanConnect(), SCH_SHEET::CanConnect(), SCH_COMPONENT::CanConnect(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeTextType(), CN_VISITOR::checkZoneItemConnection(), SCH_MARKER::ClassOf(), SCH_JUNCTION::ClassOf(), SCH_NO_CONNECT::ClassOf(), TEXTE_PCB::ClassOf(), BOARD_CONNECTED_ITEM::ClassOf(), SCH_PIN::ClassOf(), MARKER_PCB::ClassOf(), EDGE_MODULE::ClassOf(), SCH_LINE::ClassOf(), PCB_TARGET::ClassOf(), SCH_FIELD::ClassOf(), TEXTE_MODULE::ClassOf(), DRAWSEGMENT::ClassOf(), ZONE_CONTAINER::ClassOf(), SCH_BITMAP::ClassOf(), D_PAD::ClassOf(), DIMENSION::ClassOf(), TRACK::ClassOf(), NETINFO_ITEM::ClassOf(), SCH_SHEET_PIN::ClassOf(), MODULE::ClassOf(), SCH_BUS_WIRE_ENTRY::ClassOf(), SCH_SCREEN::ClassOf(), SCH_COMPONENT::ClassOf(), SCH_BUS_BUS_ENTRY::ClassOf(), SCH_TEXT::ClassOf(), SCH_SHEET::ClassOf(), BOARD::ClassOf(), ARC::ClassOf(), SCH_LABEL::ClassOf(), VIA::ClassOf(), SCH_GLOBALLABEL::ClassOf(), SCH_HIERLABEL::ClassOf(), TRACKS_CLEANER::cleanupSegments(), LIB_BEZIER::compare(), LIB_CIRCLE::compare(), LIB_RECTANGLE::compare(), LIB_TEXT::compare(), LIB_POLYLINE::compare(), LIB_ARC::compare(), LIB_FIELD::compare(), LIB_PIN::compare(), LIB_ITEM::compare(), GRID_HELPER::computeAnchors(), SCH_BUS_WIRE_ENTRY::ConnectionPropagatesTo(), EE_RTREE::contains(), DIALOG_TEXT_PROPERTIES::convertKIIDsToReferences(), SCHEMATIC::ConvertKIIDsToRefs(), MODULE::CoverageRatio(), BOARD_ADAPTER::createLayers(), PCB_BASE_FRAME::CreateNewModule(), SCH_DRAWING_TOOLS::createNewText(), BOARD_ADAPTER::createNewTrack(), D_PAD::D_PAD(), SCH_SCREEN::DeleteItem(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_SCH_EDIT_ONE_FIELD::DIALOG_SCH_EDIT_ONE_FIELD(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDIT_TOOL::DoDelete(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsVertically(), test::DRC_TEST_PROVIDER_COPPER_CLEARANCE::doTrackDrc(), DRC::doTrackDrc(), KIGFX::SCH_PAINTER::draw(), KIGFX::GERBVIEW_PAINTER::Draw(), KIGFX::PCB_PAINTER::Draw(), CN_ITEM::Dump(), EDIT_TOOL::Duplicate(), Duplicate(), MODULE::DuplicateItem(), EDA_ITEM_DESC::EDA_ITEM_DESC(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), LIB_EDIT_TOOL::editTextProperties(), EditToolSelectionFilter(), CONNECTION_GRAPH::ercCheckBusToBusEntryConflicts(), CONNECTION_GRAPH::ercCheckLabels(), NETLIST_EXPORTER::findNextComponent(), PCB_BASE_FRAME::FocusOnItem(), EDIT_TOOL::FootprintFilter(), SCH_SEXPR_PLUGIN::Format(), SCH_LEGACY_PLUGIN::Format(), PCB_IO::Format(), PCB_IO::format(), FormatProbeItem(), POINT_EDITOR::get45DegConstrainer(), CN_ITEM::GetAnchor(), BOARD_ITEM::GetBoard(), SCH_FIELD::GetBoundingBox(), TRACK::GetBoundingBox(), SCH_FIELD::GetCanonicalName(), KIGFX::GERBVIEW_RENDER_SETTINGS::GetColor(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), NETLIST_OBJECT::GetComponentParent(), SCH_MOVE_TOOL::getConnectedDragItems(), SCH_TEXT::GetConnectionPoints(), SCH_TEXT::GetContextualTextVars(), CONNECTION_GRAPH::getDefaultConnection(), CONNECTION_SUBGRAPH::GetDriverPriority(), SCH_TEXT::GetEndPoints(), PL_EDITOR_FRAME::GetLayoutFromRedoList(), PL_EDITOR_FRAME::GetLayoutFromUndoList(), SCH_FIELD::GetMenuImage(), TEXTE_PCB::GetMsgPanelInfo(), SCH_TEXT::GetMsgPanelInfo(), SCH_FIELD::GetName(), CONNECTION_SUBGRAPH::GetNameForDriver(), CONNECTIVITY_DATA::GetNetItems(), LIB_PART::GetNextDrawItem(), DRAWSEGMENT::GetParentModule(), LIB_PART::GetPin(), SCH_COMPONENT::GetPinPhysicalPosition(), SCH_FIELD::GetPosition(), getRect(), KIGFX::SCH_PAINTER::getRenderColor(), TEXTE_PCB::GetShownText(), SCH_FIELD::GetShownText(), SCH_TEXT::GetShownText(), SELECTION_TOOL::GuessSelectionCandidates(), EE_SELECTION_TOOL::GuessSelectionCandidates(), hash_eda(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), highlightNet(), SCH_EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), EE_RTREE::insert(), EE_COLLECTOR::Inspect(), GENERAL_COLLECTOR::Inspect(), PCB_LAYER_COLLECTOR::Inspect(), ARRAY_CREATOR::Invoke(), CN_ANCHOR::IsDangling(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLineWireOrBus(), TRACK::IsNull(), SCH_LINE::IsParallel(), SCH_FIELD::IsReplaceable(), SCH_SCREEN::IsTerminalPoint(), BOARD_ITEM::IsTrack(), itemIsIncludedByFilter(), SELECTION_TOOL::itemPassesFilter(), CLIPBOARD_IO::Load(), PNS_PCBNEW_RULE_RESOLVER::localPadClearance(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), EE_SELECTION_TOOL::Main(), EDIT_POINTS_FACTORY::Make(), SCH_SCREEN::MarkConnections(), CN_CONNECTIVITY_ALGO::markItemNetAsDirty(), CONNECTIVITY_DATA::MarkItemNetAsDirty(), SCH_FIELD::Matches(), SCH_LINE::MergeOverlap(), SCH_EDIT_TOOL::Mirror(), SCH_MOVE_TOOL::moveItem(), SCH_EDITOR_CONTROL::nextMatch(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), PCB_EDIT_FRAME::OnEditItemRequest(), TRACK::cmp_tracks::operator()(), CN_VISITOR::operator()(), DRAWSEGMENT::cmp_drawings::operator()(), BOARD_ITEM::ptr_cmp::operator()(), MODULE::cmp_drawings::operator()(), SCH_JUNCTION::operator<(), SCH_BUS_ENTRY_BASE::operator<(), SCH_FIELD::operator<(), SCH_LINE::operator<(), LIB_ITEM::operator<(), SCH_TEXT::operator<(), operator<(), SCH_SHEET::operator<(), SCH_COMPONENT::operator<(), SCH_BITMAP::operator=(), SCH_SHEET::operator=(), SCH_COMPONENT::operator=(), EDIT_TOOL::PadFilter(), BOARD_COMMIT::parentObject(), PCBNEW_CONTROL::Paste(), SCH_EDITOR_CONTROL::Paste(), DRAWING_TOOL::PlaceImportedGraphics(), SCH_FIELD::Plot(), SCH_SCREEN::Plot(), BRDITEMS_PLOTTER::PlotFootprintGraphicItem(), SCH_FIELD::Print(), SCH_SCREEN::Print(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::processItem(), BACK_ANNOTATE::processNetNameChange(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), SELECTION_TOOL::RebuildSelection(), SCH_CONNECTION::recacheName(), SCH_BASE_FRAME::RefreshItem(), SCH_BASE_FRAME::RefreshSelection(), EE_RTREE::remove(), MODULE::Remove(), CN_CONNECTIVITY_ALGO::Remove(), SCH_SCREEN::Remove(), BOARD::Remove(), POINT_EDITOR::removeCorner(), POINT_EDITOR::removeCornerCondition(), LIB_PART::RemoveDrawItem(), SCH_SHEET::RemovePin(), SCH_EDIT_TOOL::RepeatDrawItem(), SCH_FIELD::Replace(), SCHEMATIC::ResolveCrossReference(), WS_PROXY_UNDO_ITEM::Restore(), PL_EDITOR_FRAME::RollbackFromUndo(), SCH_EDIT_TOOL::Rotate(), SCH_TEXT::Rotate(), DRC_TEXTVAR_TESTER::RunDRC(), SCH_SEXPR_PLUGIN_CACHE::saveArc(), SCH_LEGACY_PLUGIN_CACHE::saveArc(), SCH_SEXPR_PLUGIN_CACHE::saveBezier(), SCH_LEGACY_PLUGIN_CACHE::saveBezier(), SCH_SEXPR_PLUGIN_CACHE::saveCircle(), SCH_LEGACY_PLUGIN_CACHE::saveCircle(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), EE_TOOL_BASE< SCH_BASE_FRAME >::saveCopyInUndoList(), SCH_SEXPR_PLUGIN::saveField(), SCH_SEXPR_PLUGIN_CACHE::saveField(), SCH_LEGACY_PLUGIN_CACHE::saveField(), SCH_SEXPR_PLUGIN_CACHE::savePin(), SCH_LEGACY_PLUGIN_CACHE::savePin(), SCH_SEXPR_PLUGIN_CACHE::savePolyLine(), SCH_LEGACY_PLUGIN_CACHE::savePolyLine(), SCH_SEXPR_PLUGIN_CACHE::saveRectangle(), SCH_LEGACY_PLUGIN_CACHE::saveRectangle(), CLIPBOARD_IO::SaveSelection(), SCH_SEXPR_PLUGIN_CACHE::saveSymbolDrawItem(), SCH_SEXPR_PLUGIN::saveText(), SCH_SEXPR_PLUGIN_CACHE::saveText(), SCH_LEGACY_PLUGIN_CACHE::saveText(), SCH_SCREEN::Schematic(), Schematic(), SELECTION_TOOL::select(), SELECTION_TOOL::Selectable(), EE_SELECTION_TOOL::Selectable(), SELECTION_TOOL::selectConnectedTracks(), SCH_FIELD::SetId(), ITEM_PICKER::SetItem(), SCH_FIELD::SetPosition(), DIALOG_LABEL_EDITOR::SetTitle(), PCB_EDIT_FRAME::SetTrackSegmentWidth(), BOARD_COMMIT::Stage(), SCH_JUNCTION::SwapData(), SCH_NO_CONNECT::SwapData(), SCH_BITMAP::SwapData(), PCB_TARGET::SwapData(), SCH_SHEET_PIN::SwapData(), SCH_FIELD::SwapData(), TEXTE_PCB::SwapData(), TRACK::SwapData(), DIMENSION::SwapData(), ARC::SwapData(), SCH_SHEET::SwapData(), VIA::SwapData(), SCH_COMPONENT::SwapData(), D_PAD::SwapData(), MODULE::SwapData(), ZONE_CONTAINER::SwapData(), SwapItemData(), TEXTE_MODULE::TEXTE_MODULE(), DIALOG_LABEL_EDITOR::TransferDataFromWindow(), DIALOG_FIELDS_EDITOR_GLOBAL::TransferDataToWindow(), DIALOG_TEXT_PROPERTIES::TransferDataToWindow(), DIALOG_LABEL_EDITOR::TransferDataToWindow(), TRACK::TransformShapeWithClearanceToPolygon(), LIB_DRAWING_TOOLS::TwoClickPlace(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), KIGFX::PCB_VIEW::Update(), SCH_TEXT::UpdateDanglingState(), DIALOG_SCH_EDIT_ONE_FIELD::UpdateField(), EE_POINT_EDITOR::updateItem(), PL_POINT_EDITOR::updateItem(), POINT_EDITOR::updateItem(), CONNECTION_GRAPH::updateItemConnectivity(), DIALOG_SELECT_NET_FROM_LIST::updateNet(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_BRIGHT_BOX::ViewDraw(), SCH_BUS_ENTRY_BASE::ViewGetLayers(), TRACK::Visit(), GERBER_DRAW_ITEM::Visit(), SCH_SHEET::Visit(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ UpdateDanglingState()

virtual bool SCH_ITEM::UpdateDanglingState ( std::vector< DANGLING_END_ITEM > &  aItemList,
const SCH_SHEET_PATH aPath = nullptr 
)
inlinevirtual

Test the schematic item to aItemList to check if it's dangling state has changed.

Note that the return value only true when the state of the test has changed. Use the IsDangling() method to get the current dangling state of the item. Some of the schematic objects cannot be tested for a dangling state, the default method always returns false. Only override the method if the item can be tested for a dangling state.

If aSheet is passed a non-null pointer to a SCH_SHEET_PATH, the overrided method can optionally use it to update sheet-local connectivity information

Parameters
aItemList- List of items to test item against.
aSheet- Sheet path to update connections for
Returns
True if the dangling state has changed from it's current setting.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_BUS_BUS_ENTRY, SCH_LINE, and SCH_BUS_WIRE_ENTRY.

Definition at line 357 of file sch_item.h.

359  {
360  return false;
361  }

◆ ViewBBox()

const BOX2I EDA_ITEM::ViewBBox ( ) const
overridevirtualinherited

Function ViewBBox() returns the bounding box of the item covering all its layers.

Returns
BOX2I - the current bounding box

Implements KIGFX::VIEW_ITEM.

Reimplemented in MODULE, D_PAD, EDIT_POINTS, DRAWSEGMENT, GERBER_DRAW_ITEM, DIMENSION, TRACK, TEXTE_MODULE, ROUTER_PREVIEW_ITEM, KIGFX::WS_PROXY_VIEW_ITEM, MARKER_PCB, MARKER_PCB, MY_DRAWING, KIGFX::ORIGIN_VIEWITEM, KIGFX::PREVIEW::CENTRELINE_RECT_ITEM, KIGFX::PREVIEW::POLYGON_ITEM, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::PREVIEW::RULER_ITEM, KIGFX::RATSNEST_VIEWITEM, KIGFX::PREVIEW::ARC_ASSISTANT, and BRIGHT_BOX.

Definition at line 220 of file base_struct.cpp.

221 {
222  // Basic fallback
223  return BOX2I( VECTOR2I( GetBoundingBox().GetOrigin() ),
224  VECTOR2I( GetBoundingBox().GetSize() ) );
225 }
BOX2< VECTOR2I > BOX2I
Definition: box2.h:522
VECTOR2< int > VECTOR2I
Definition: vector2d.h:594
virtual const EDA_RECT GetBoundingBox() const
Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes.
Definition: base_struct.cpp:97

References EDA_ITEM::GetBoundingBox().

Referenced by GERBVIEW_FRAME::GetDocumentExtents(), BRIGHT_BOX::ViewBBox(), DIMENSION::ViewBBox(), DRAWSEGMENT::ViewBBox(), and BRIGHT_BOX::ViewDraw().

◆ ViewDraw()

virtual void KIGFX::VIEW_ITEM::ViewDraw ( int  aLayer,
VIEW aView 
) const
inlinevirtualinherited

Function ViewDraw() Draws the parts of the object belonging to layer aLayer.

viewDraw() is an alternative way for drawing objects if if there is no PAINTER assigned for the view or if the PAINTER doesn't know how to paint this particular implementation of VIEW_ITEM. The preferred way of drawing is to design an appropriate PAINTER object, the method below is intended only for quick hacks and debugging purposes.

Parameters
aLayercurrent drawing layer
aViewpointer to the VIEW device we are drawing on

Reimplemented in EDIT_POINTS, ROUTER_PREVIEW_ITEM, KIGFX::WS_PROXY_VIEW_ITEM, KIGFX::VIEW_GROUP, KIGFX::PREVIEW::SELECTION_AREA, MY_DRAWING, KIGFX::PREVIEW::SIMPLE_OVERLAY_ITEM, KIGFX::VIEW_OVERLAY, KIGFX::ORIGIN_VIEWITEM, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, BRIGHT_BOX, KIGFX::PREVIEW::RULER_ITEM, KIGFX::RATSNEST_VIEWITEM, KIGFX::PREVIEW::ARC_ASSISTANT, and PCB_BRIGHT_BOX.

Definition at line 117 of file view_item.h.

118  {}

Referenced by KIGFX::VIEW::draw(), and KIGFX::VIEW::updateItemGeometry().

◆ ViewGetLayers()

void SCH_ITEM::ViewGetLayers ( int  aLayers[],
int &  aCount 
) const
overridevirtual

Return the layers the item is drawn on (which may be more than its "home" layer)

Reimplemented from EDA_ITEM.

Reimplemented in SCH_SHEET, SCH_LINE, SCH_NO_CONNECT, SCH_JUNCTION, and SCH_MARKER.

Definition at line 132 of file sch_item.cpp.

133 {
134  // Basic fallback
135  aCount = 2;
136  aLayers[0] = LAYER_DEVICE;
137  aLayers[1] = LAYER_SELECTION_SHADOWS;
138 }

References LAYER_DEVICE, and LAYER_SELECTION_SHADOWS.

◆ ViewGetLOD()

virtual unsigned int KIGFX::VIEW_ITEM::ViewGetLOD ( int  aLayer,
VIEW aView 
) const
inlinevirtualinherited

Function ViewGetLOD() Returns the level of detail (LOD) of the item.

A level of detail is the minimal VIEW scale that is sufficient for an item to be shown on a given layer.

Parameters
aLayercurrent drawing layer
aViewpointer to the VIEW device we are drawing on
Returns
the level of detail. 0 always show the item, because the actual zoom level (or VIEW scale) is always > 0

Reimplemented in MODULE_ZONE_CONTAINER, MODULE, D_PAD, VIA, GERBER_DRAW_ITEM, TEXTE_MODULE, TRACK, and EDGE_MODULE.

Definition at line 141 of file view_item.h.

142  {
143  // By default always show the item
144  return 0;
145  }

Referenced by KIGFX::VIEW::drawItem::operator()(), GRID_HELPER::queryVisible(), and SELECTION_TOOL::Selectable().

◆ viewPrivData()

◆ Visit()

SEARCH_RESULT EDA_ITEM::Visit ( INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
virtualinherited

Function Visit may be re-implemented for each derived class in order to handle all the types given by its member data.

Implementations should call inspector->Inspect() on types in scanTypes[], and may use IterateForward() to do so on lists of such data.

Parameters
inspectorAn INSPECTOR instance to use in the inspection.
testDataArbitrary data used by the inspector.
scanTypesWhich KICAD_T types are of interest and the order is significant too, terminated by EOT.
Returns
SEARCH_RESULT SEARCH_QUIT if the Iterator is to stop the scan, else SCAN_CONTINUE, and determined by the inspector.

Reimplemented in BOARD, SCH_COMPONENT, MODULE, SCH_SHEET, LIB_PART, GERBER_FILE_IMAGE, GERBER_DRAW_ITEM, TRACK, and GBR_LAYOUT.

Definition at line 120 of file base_struct.cpp.

121 {
122 #if 0 && defined(DEBUG)
123  std::cout << GetClass().mb_str() << ' ';
124 #endif
125 
126  if( IsType( scanTypes ) )
127  {
128  if( SEARCH_RESULT::QUIT == inspector( this, testData ) )
129  return SEARCH_RESULT::QUIT;
130  }
131 
133 }
virtual bool IsType(const KICAD_T aScanTypes[]) const
Function IsType Checks whether the item is one of the listed types.
Definition: base_struct.h:262
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References CONTINUE, EDA_ITEM::GetClass(), EDA_ITEM::IsType(), and QUIT.

Referenced by GERBER_COLLECTOR::Collect(), GENERAL_COLLECTOR::Collect(), PCB_TYPE_COLLECTOR::Collect(), PCB_LAYER_COLLECTOR::Collect(), and EDA_ITEM::IterateForward().

Friends And Related Function Documentation

◆ CONNECTION_GRAPH

friend class CONNECTION_GRAPH
friend

Definition at line 189 of file sch_item.h.

Member Data Documentation

◆ m_connected_items

std::unordered_map<SCH_SHEET_PATH, ITEM_SET> SCH_ITEM::m_connected_items
protected

Stores pointers to other items that are connected to this one, per sheet.

Definition at line 199 of file sch_item.h.

Referenced by AddConnectionTo(), ConnectedItems(), SCH_LABEL::IsType(), and SCH_TEXT::UpdateDanglingState().

◆ m_connection_map

std::unordered_map<SCH_SHEET_PATH, SCH_CONNECTION*> SCH_ITEM::m_connection_map
protected

Stores connectivity information, per sheet.

Definition at line 202 of file sch_item.h.

Referenced by Connection(), InitializeConnection(), NetClass(), and ~SCH_ITEM().

◆ m_connections

EDA_ITEMS SCH_ITEM::m_connections
protected

Definition at line 193 of file sch_item.h.

Referenced by ClearConnections(), and ~SCH_ITEM().

◆ m_connectivity_dirty

bool SCH_ITEM::m_connectivity_dirty
protected

True if connectivity info might be out of date.

Definition at line 205 of file sch_item.h.

Referenced by IsConnectivityDirty(), SCH_ITEM(), and SetConnectivityDirty().

◆ m_fieldsAutoplaced

FIELDS_AUTOPLACED SCH_ITEM::m_fieldsAutoplaced
protected

◆ m_Flags

◆ m_forceVisible

bool EDA_ITEM::m_forceVisible
protectedinherited

◆ m_Layer

◆ m_Parent

◆ m_Status

◆ m_storedPos

wxPoint SCH_ITEM::m_storedPos
protected

Definition at line 195 of file sch_item.h.

Referenced by GetStoredPos(), and SetStoredPos().

◆ m_Uuid

const KIID EDA_ITEM::m_Uuid
inherited

Definition at line 162 of file base_struct.h.

Referenced by FIELDS_EDITOR_GRID_DATA_MODEL::AddColumn(), SCH_COMPONENT::AddHierarchicalReference(), SCH_EDIT_FRAME::AnnotateComponents(), FIELDS_EDITOR_GRID_DATA_MODEL::ApplyData(), SCH_SHEET_PATH::Cmp(), SCHEMATIC::ConvertRefsToKIIDs(), BOARD_ITEM::Duplicate(), Duplicate(), PAD_TOOL::EditPad(), PCB_EDIT_FRAME::Exchange_Module(), PAD_TOOL::explodePad(), PCB_BASE_FRAME::FocusOnItem(), SCH_EDIT_FRAME::FocusOnItem(), PCB_IO::format(), FormatProbeItem(), SCH_PIN::GetDefaultNetName(), BOARD::GetItem(), SCH_SHEET::GetMsgPanelInfo(), SCH_REFERENCE::GetPath(), SCH_COMPONENT::GetRef(), SCH_MARKER::GetUUID(), MARKER_PCB::GetUUID(), FIELDS_EDITOR_GRID_DATA_MODEL::groupMatch(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), SCH_LEGACY_PLUGIN::loadComponent(), LEGACY_PLUGIN::loadMODULE(), LEGACY_PLUGIN::loadPCB_TARGET(), LEGACY_PLUGIN::loadPCB_TEXT(), LEGACY_PLUGIN::loadTrackList(), NETLIST_EXPORTER_GENERIC::makeComponents(), SCH_EDIT_FRAME::mapExistingAnnotation(), TRACK::cmp_tracks::operator()(), DRAWSEGMENT::cmp_drawings::operator()(), BOARD_ITEM::ptr_cmp::operator()(), MODULE::cmp_drawings::operator()(), MODULE::cmp_pads::operator()(), operator<(), SCH_COMPONENT::operator<(), PCB_PARSER::parseDIMENSION(), PCB_PARSER::parseMODULE_unchecked(), SCH_EDITOR_CONTROL::Paste(), SCH_SHEET_PATH::PathAsString(), SCH_SCREENS::ReplaceDuplicateTimeStamps(), SCH_COMPONENT::ReplaceInstanceSheetPath(), SCH_LEGACY_PLUGIN::saveComponent(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_EDIT_FRAME::SaveProject(), SCH_SEXPR_PLUGIN::saveSheet(), SCH_LEGACY_PLUGIN::saveSheet(), SCH_SEXPR_PLUGIN::saveSymbol(), SCH_COMPONENT::SCH_COMPONENT(), SCH_REFERENCE::SCH_REFERENCE(), SCH_SHEET::SCH_SHEET(), RC_ITEM::SetItems(), SwapItemData(), DIALOG_SCH_SHEET_PROPS::TransferDataToWindow(), and NETLIST_EXPORTER_ORCADPCB2::WriteNetlist().


The documentation for this class was generated from the following files: