KiCad PCB EDA Suite
PCB_TOOL_BASE Class Reference

#include <pcb_tool_base.h>

Inheritance diagram for PCB_TOOL_BASE:
TOOL_INTERACTIVE TOOL_BASE AUTOPLACE_TOOL DRAWING_TOOL DRC EDIT_TOOL FOOTPRINT_EDITOR_TOOLS GLOBAL_EDIT_TOOL MICROWAVE_TOOL PAD_TOOL PCB_EDITOR_CONTROL PCB_INSPECTION_TOOL PCB_REANNOTATE_TOOL PCBNEW_CONTROL PCBNEW_PICKER_TOOL PNS::TOOL_BASE POINT_EDITOR POSITION_RELATIVE_TOOL SELECTION_TOOL ZONE_FILLER_TOOL

Public Types

enum  RESET_REASON { RUN, MODEL_RELOAD, GAL_SWITCH }
 

Determines the reason of reset for a tool

More...
 

Public Member Functions

 PCB_TOOL_BASE (TOOL_ID aId, const std::string &aName)
 Constructor. More...
 
 PCB_TOOL_BASE (const std::string &aName)
 Constructor. More...
 
virtual ~PCB_TOOL_BASE ()
 
virtual bool Init () override
 Function Init() Init() is called once upon a registration of the tool. More...
 
virtual void Reset (RESET_REASON aReason) override
 Function Reset() Brings the tool to a known, initial state. More...
 
void SetEditModules (bool aEnabled)
 Function SetEditModules() More...
 
bool EditingModules () const
 
void Activate ()
 Function Activate() Runs the tool. More...
 
TOOL_MENUGetToolMenu ()
 
void SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Function SetContextMenu() More...
 
void RunMainStack (std::function< void()> aFunc)
 Function RunMainStack() More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Go() More...
 
TOOL_EVENTWait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Wait() More...
 
TOOL_TYPE GetType () const
 Function GetType() Returns the type of the tool. More...
 
TOOL_ID GetId () const
 Function GetId() Returns the unique identifier of the tool. More...
 
const std::string & GetName () const
 Function GetName() Returns the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool. More...
 
bool IsToolActive () const
 

Protected Types

enum  INTERACTIVE_PLACEMENT_OPTIONS { IPO_ROTATE = 0x01, IPO_FLIP = 0x02, IPO_SINGLE_CLICK = 0x04, IPO_REPEAT = 0x08 }
 Options for placing items interactively. More...
 

Protected Member Functions

void doInteractiveItemPlacement (const std::string &aTool, INTERACTIVE_PLACER_BASE *aPlacer, const wxString &aCommitMessage, int aOptions=IPO_ROTATE|IPO_FLIP|IPO_REPEAT)
 Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc. More...
 
virtual void setTransitions () override
 This method is meant to be overridden in order to specify handlers for events. More...
 
KIGFX::PCB_VIEWview () const
 
KIGFX::VIEW_CONTROLScontrols () const
 
PCB_BASE_EDIT_FRAMEframe () const
 
BOARDboard () const
 
MODULEmodule () const
 
const PCB_DISPLAY_OPTIONSdisplayOptions () const
 
PCB_DRAW_PANEL_GALcanvas () const
 
const PCBNEW_SELECTIONselection () const
 
PCBNEW_SELECTIONselection ()
 
void attachManager (TOOL_MANAGER *aManager)
 Function attachManager() More...
 
KIGFX::VIEWgetView () const
 Function getView() More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Function getViewControls() More...
 
template<typename T >
T * getEditFrame () const
 Function getEditFrame() More...
 
template<typename T >
T * getModel () const
 Function getModel() More...
 

Protected Attributes

bool m_editModules
 
TOOL_MENU m_menu
 functions below are not yet implemented - their interface may change More...
 
TOOL_TYPE m_type
 

Stores the type of the tool.

More...
 
TOOL_ID m_toolId
 

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

More...
 
std::string m_toolName
 

Name of the tool.

More...
 
TOOL_MANAGERm_toolMgr
 

Detailed Description

Definition at line 68 of file pcb_tool_base.h.

Member Enumeration Documentation

◆ INTERACTIVE_PLACEMENT_OPTIONS

Options for placing items interactively.

Enumerator
IPO_ROTATE 

Handle the rotate action in the loop by calling the item's rotate method.

IPO_FLIP 

Handle flip action in the loop by calling the item's flip method.

IPO_SINGLE_CLICK 

Create an item immediately on placement starting, otherwise show the pencil cursor until the item is created.

IPO_REPEAT 

Allow repeat placement of the item.

Definition at line 116 of file pcb_tool_base.h.

116  {
118  IPO_ROTATE = 0x01,
119 
121  IPO_FLIP = 0x02,
122 
125  IPO_SINGLE_CLICK = 0x04,
126 
128  IPO_REPEAT = 0x08
129  };
Handle flip action in the loop by calling the item's flip method.
Allow repeat placement of the item.
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
Handle the rotate action in the loop by calling the item's rotate method.

◆ RESET_REASON

enum TOOL_BASE::RESET_REASON
inherited

Determines the reason of reset for a tool

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

Definition at line 79 of file tool_base.h.

80  {
81  RUN,
82  MODEL_RELOAD,
83  GAL_SWITCH
84  };
Model changes (required full reload)
Definition: tool_base.h:82
Tool is invoked after being inactive.
Definition: tool_base.h:81
Rendering engine changes.
Definition: tool_base.h:83

Constructor & Destructor Documentation

◆ PCB_TOOL_BASE() [1/2]

PCB_TOOL_BASE::PCB_TOOL_BASE ( TOOL_ID  aId,
const std::string &  aName 
)
inline

Constructor.

Creates a tool with given id & name. The name must be unique.

Definition at line 75 of file pcb_tool_base.h.

75  :
76  TOOL_INTERACTIVE ( aId, aName ),
77  m_editModules( false )
78  {};
TOOL_INTERACTIVE(TOOL_ID aId, const std::string &aName)
Constructor.

◆ PCB_TOOL_BASE() [2/2]

PCB_TOOL_BASE::PCB_TOOL_BASE ( const std::string &  aName)
inline

Constructor.

Creates a tool with given name. The name must be unique.

Definition at line 84 of file pcb_tool_base.h.

84  :
85  TOOL_INTERACTIVE ( aName ),
86  m_editModules( false )
87  {};
TOOL_INTERACTIVE(TOOL_ID aId, const std::string &aName)
Constructor.

◆ ~PCB_TOOL_BASE()

virtual PCB_TOOL_BASE::~PCB_TOOL_BASE ( )
inlinevirtual

Definition at line 89 of file pcb_tool_base.h.

89 {};

Member Function Documentation

◆ Activate()

void TOOL_INTERACTIVE::Activate ( )
inherited

Function Activate() Runs the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 51 of file tool_interactive.cpp.

52 {
54 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool InvokeTool(TOOL_ID aToolId)
Function InvokeTool() Calls a tool by sending a tool activation event to tool of given ID.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), EDIT_TOOL::copyToClipboard(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), PAD_TOOL::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), PL_POINT_EDITOR::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), LIB_TREE::onContextMenu(), POINT_EDITOR::OnSelectionChange(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), DRC::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Function attachManager()

Sets the TOOL_MANAGER the tool will belong to. Called by TOOL_MANAGER::RegisterTool()

Definition at line 60 of file tool_base.cpp.

61 {
62  m_toolMgr = aManager;
63 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

◆ board()

BOARD* PCB_TOOL_BASE::board ( ) const
inlineprotected

Definition at line 166 of file pcb_tool_base.h.

166 { return getModel<BOARD>(); }

Referenced by PCBNEW_CONTROL::AppendBoard(), AUTOPLACE_TOOL::autoplace(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), EDIT_TOOL::ChangeTrackWidth(), ZONE_FILLER_TOOL::CheckAllZones(), checkClearancePadToPad(), checkClearanceSegmToPad(), PCB_INSPECTION_TOOL::ClearHighlight(), DRAWING_TOOL::constrainDimension(), EDIT_TOOL::copyToClipboard(), MICROWAVE_TOOL::createInductorBetween(), ROUTER_TOOL::CustomTrackWidthDialog(), PCBNEW_CONTROL::DeleteItemCursor(), doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawSegment(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), ZONE_FILLER_TOOL::FillAllZones(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::getCollectorsGuide(), PCB_INSPECTION_TOOL::highlightNet(), PCBNEW_CONTROL::LayerNext(), PCBNEW_CONTROL::LayerPrev(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), module(), EDIT_TOOL::MoveExact(), ROUTER_TOOL::onTrackViaSizeChanged(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::Paste(), PCBNEW_CONTROL::placeBoardItems(), PCB_EDITOR_CONTROL::PlaceModule(), PAD_TOOL::PlacePad(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), SELECTION_TOOL::RebuildSelection(), PAD_TOOL::recombinePad(), EDIT_TOOL::Remove(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), SELECTION_TOOL::Selectable(), SELECTION_TOOL::selectAllItemsOnNet(), SELECTION_TOOL::selectAllItemsOnSheet(), SELECTION_TOOL::selectConnectedTracks(), SELECTION_TOOL::selectPoint(), PCBNEW_CONTROL::TrackDisplayMode(), POINT_EDITOR::updateItem(), PCBNEW_CONTROL::ViaDisplayMode(), PCBNEW_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfillAll().

◆ canvas()

◆ controls()

◆ displayOptions()

const PCB_DISPLAY_OPTIONS & PCB_TOOL_BASE::displayOptions ( ) const
protected

Definition at line 264 of file pcb_tool_base.cpp.

265 {
266  return frame()->GetDisplayOptions();
267 }
const PCB_DISPLAY_OPTIONS & GetDisplayOptions() const
Function GetDisplayOptions Display options control the way tracks, vias, outlines and other things ar...
PCB_BASE_EDIT_FRAME * frame() const

References frame(), and PCB_BASE_FRAME::GetDisplayOptions().

Referenced by PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), PCBNEW_CONTROL::HighContrastMode(), PCBNEW_CONTROL::HighContrastModeCycle(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PNS::TOOL_BASE::pickSingleItem(), PCBNEW_CONTROL::ToggleRatsnest(), PCBNEW_CONTROL::TrackDisplayMode(), PCBNEW_CONTROL::ViaDisplayMode(), and PCBNEW_CONTROL::ZoneDisplayMode().

◆ doInteractiveItemPlacement()

void PCB_TOOL_BASE::doInteractiveItemPlacement ( const std::string &  aTool,
INTERACTIVE_PLACER_BASE aPlacer,
const wxString &  aCommitMessage,
int  aOptions = IPO_ROTATE | IPO_FLIP | IPO_REPEAT 
)
protected

Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.

More complex interactive processes are not supported here, you should implement a customised event loop for those.

Parameters
aItemCreatorthe callable that will attempt to create the item
aCommitMessagethe message used on a successful commit

Definition at line 37 of file pcb_tool_base.cpp.

40 {
41  using namespace std::placeholders;
42  std::unique_ptr<BOARD_ITEM> newItem;
43 
44  frame()->PushTool( aTool );
45  Activate();
46 
47  BOARD_COMMIT commit( frame() );
48 
50 
51  // do not capture or auto-pan until we start placing an item
52  controls()->ShowCursor( true );
53  controls()->SetSnapping( true );
54 
55  // Add a VIEW_GROUP that serves as a preview for the new item
56  PCBNEW_SELECTION preview;
57  view()->Add( &preview );
58 
59  aPlacer->m_board = board();
60  aPlacer->m_frame = frame();
61  aPlacer->m_modifiers = 0;
62 
63  auto makeNewItem = [&] ( VECTOR2I aPosition )
64  {
65  if( frame()->GetModel() )
66  newItem = aPlacer->CreateItem();
67 
68  if( newItem )
69  {
70  newItem->SetPosition( (wxPoint) aPosition );
71  preview.Add( newItem.get() );
72 
73  if( newItem->Type() == PCB_MODULE_T )
74  {
75  auto module = dyn_cast<MODULE*>( newItem.get() );
76 
77  // modules have more drawable parts
78  module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
79  }
80  }
81  };
82 
83  if( aOptions & IPO_SINGLE_CLICK )
84  makeNewItem( controls()->GetCursorPosition() );
85 
86  // Main loop: keep receiving events
87  while( TOOL_EVENT* evt = Wait() )
88  {
89  if( !newItem )
90  frame()->GetCanvas()->SetCurrentCursor( wxCURSOR_PENCIL );
91  else
92  frame()->GetCanvas()->SetCurrentCursor( wxCURSOR_ARROW );
93 
94  VECTOR2I cursorPos = controls()->GetCursorPosition();
95  aPlacer->m_modifiers = evt->Modifier();
96 
97  auto cleanup = [&] ()
98  {
99  newItem = nullptr;
100  preview.Clear();
101  view()->Update( &preview );
102  controls()->SetAutoPan( false );
103  controls()->CaptureCursor( false );
104  controls()->ShowCursor( true );
105  };
106 
107  if( evt->IsCancelInteractive() )
108  {
109  if( aOptions & IPO_SINGLE_CLICK )
110  {
111  cleanup();
112  frame()->PopTool( aTool );
113  break;
114  }
115  else if( newItem )
116  cleanup();
117  else
118  {
119  frame()->PopTool( aTool );
120  break;
121  }
122  }
123  else if( evt->IsActivate() )
124  {
125  if( newItem )
126  cleanup();
127 
128  if( evt->IsPointEditor() )
129  {
130  // don't exit (the point editor runs in the background)
131  }
132  else if( evt->IsMoveTool() )
133  {
134  // leave ourselves on the stack so we come back after the move
135  break;
136  }
137  else
138  {
139  frame()->PopTool( aTool );
140  break;
141  }
142  }
143  else if( evt->IsClick( BUT_LEFT ) )
144  {
145  if( !newItem )
146  {
147  // create the item if possible
148  makeNewItem( cursorPos );
149 
150  // no item created, so wait for another click
151  if( !newItem )
152  continue;
153 
154  controls()->CaptureCursor( true );
155  controls()->SetAutoPan( true );
156  }
157  else
158  {
159  auto oldFlags = newItem->GetFlags();
160  newItem->ClearFlags();
161 
162  if( !aPlacer->PlaceItem( newItem.get(), commit ) )
163  {
164  newItem->SetFlags( oldFlags );
165  continue;
166  }
167 
168  preview.Clear();
169  newItem.release();
170  commit.Push( aCommitMessage );
171 
172  controls()->CaptureCursor( false );
173  controls()->SetAutoPan( false );
174  controls()->ShowCursor( true );
175 
176  if( !( aOptions & IPO_REPEAT ) )
177  break;
178 
179  if( aOptions & IPO_SINGLE_CLICK )
180  makeNewItem( controls()->GetCursorPosition() );
181  }
182  }
183  else if( evt->IsClick( BUT_RIGHT ) )
184  {
186  }
187  else if( newItem && evt->Category() == TC_COMMAND )
188  {
189  /*
190  * Handle any events that can affect the item as we move it around
191  */
192  if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) && ( aOptions & IPO_ROTATE ) )
193  {
194  const int rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle( *frame(), *evt );
195  newItem->Rotate( newItem->GetPosition(), rotationAngle );
196  view()->Update( &preview );
197  }
198  else if( evt->IsAction( &PCB_ACTIONS::flip ) && ( aOptions & IPO_FLIP ) )
199  {
200  newItem->Flip( newItem->GetPosition(), frame()->Settings().m_FlipLeftRight );
201  view()->Update( &preview );
202  }
203  else if( evt->IsAction( &PCB_ACTIONS::viaSizeInc )
204  || evt->IsAction( &PCB_ACTIONS::viaSizeDec ) )
205  {
206  // Refresh preview after event runs
208  }
209  else if( evt->IsAction( &ACTIONS::refreshPreview ) )
210  {
211  preview.Clear();
212  newItem.release();
213 
214  makeNewItem( controls()->GetCursorPosition() );
215  view()->Update( &preview );
216  }
217  }
218 
219  else if( newItem && evt->IsMotion() )
220  {
221  // track the cursor
222  newItem->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
223  aPlacer->SnapItem( newItem.get() );
224 
225  // Show a preview of the item
226  view()->Update( &preview );
227  }
228 
229  else
230  evt->SetPassEvent();
231  }
232 
233  view()->Remove( &preview );
234 }
static TOOL_ACTION selectionClear
Clears the current selection.
Definition: pcb_actions.h:62
virtual void ShowCursor(bool aEnabled)
Function ShowCursor() Enables or disables display of cursor.
TOOL_MENU m_menu
functions below are not yet implemented - their interface may change
virtual void Clear() override
Function Clear() Removes all the stored items from the group.
Definition: selection.h:95
void RunOnChildren(const std::function< void(BOARD_ITEM *)> &aFunction)
Function RunOnChildren.
TOOL_EVENT * Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Function Wait()
virtual bool PlaceItem(BOARD_ITEM *aItem, BOARD_COMMIT &aCommit)
Handle flip action in the loop by calling the item's flip method.
BOARD * board() const
virtual void Update(VIEW_ITEM *aItem, int aUpdateFlags) override
For dynamic VIEWs, informs the associated VIEW that the graphical representation of this item has cha...
Definition: pcb_view.cpp:92
static TOOL_ACTION viaSizeInc
Definition: pcb_actions.h:279
virtual std::unique_ptr< BOARD_ITEM > CreateItem()=0
void SetCurrentCursor(wxStockCursor aStockCursorID)
Function SetCurrentCursor Set the current cursor shape for this panel.
PCB_DRAW_PANEL_GAL * GetCanvas() const override
Return a pointer to GAL-based canvas of given EDA draw frame.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
virtual void PushTool(const std::string &actionName)
NB: the definition of "tool" is different at the user level.
virtual void SetSnapping(bool aEnabled)
Function SetSnapping() Enables/disables snapping cursor to grid.
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Function RunAction() Runs the specified action.
Definition: tool_manager.h:140
bool IsRotateToolEvt(const TOOL_EVENT &aEvt)
Function isRotateToolEvt()
virtual void Remove(VIEW_ITEM *aItem) override
Function Remove() Removes a VIEW_ITEM from the view.
Definition: pcb_view.cpp:75
virtual void Add(EDA_ITEM *aItem)
Definition: selection.h:76
TOOL_MANAGER * GetManager() const
Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.
Definition: tool_base.h:143
PCB_BASE_EDIT_FRAME * frame() const
virtual void SnapItem(BOARD_ITEM *aItem)
class MODULE, a footprint
Definition: typeinfo.h:89
const PCBNEW_SELECTION & selection() const
Allow repeat placement of the item.
virtual void PopTool(const std::string &actionName)
virtual void CaptureCursor(bool aEnabled)
Function CaptureCursor() Forces the cursor to stay within the drawing panel area.
TOOL_EVENT.
Definition: tool_event.h:171
KIGFX::PCB_VIEW * view() const
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
virtual void Add(VIEW_ITEM *aItem)
Function Add() Adds an item to the group.
Definition: view_group.cpp:55
virtual void SetAutoPan(bool aEnabled)
Function SetAutoPan Turns on/off auto panning (this feature is used when there is a tool active (eg.
virtual BOARD_ITEM_CONTAINER * GetModel() const =0
Function GetModel()
static TOOL_ACTION flip
Flipping of selected objects.
Definition: pcb_actions.h:103
Handle the rotate action in the loop by calling the item's rotate method.
KIGFX::VIEW_CONTROLS * controls() const
MODULE * module() const
PCBNEW_SETTINGS & Settings()
void Activate()
Function Activate() Runs the tool.
virtual void Add(VIEW_ITEM *aItem, int aDrawPriority=-1) override
Function Add() Adds a VIEW_ITEM to the view.
Definition: pcb_view.cpp:58
PCB_BASE_EDIT_FRAME * m_frame
Definition: pcb_tool_base.h:62
int GetEventRotationAngle(const PCB_BASE_EDIT_FRAME &aFrame, const TOOL_EVENT &aEvt)
Function getEventRotationAngle()
void ShowContextMenu(SELECTION &aSelection)
Function ShowContextMenu.
Definition: tool_menu.cpp:59
static TOOL_ACTION viaSizeDec
Definition: pcb_actions.h:280
static TOOL_ACTION refreshPreview
Definition: actions.h:102
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.

References TOOL_INTERACTIVE::Activate(), KIGFX::PCB_VIEW::Add(), KIGFX::VIEW_GROUP::Add(), SELECTION::Add(), board(), BUT_LEFT, BUT_RIGHT, KIGFX::VIEW_CONTROLS::CaptureCursor(), SELECTION::Clear(), controls(), INTERACTIVE_PLACER_BASE::CreateItem(), PCB_ACTIONS::flip, frame(), PCB_BASE_FRAME::GetCanvas(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), TOOL_EVT_UTILS::GetEventRotationAngle(), TOOL_BASE::GetManager(), PCB_BASE_FRAME::GetModel(), IPO_FLIP, IPO_REPEAT, IPO_ROTATE, IPO_SINGLE_CLICK, TOOL_EVT_UTILS::IsRotateToolEvt(), INTERACTIVE_PLACER_BASE::m_board, PCBNEW_SETTINGS::m_FlipLeftRight, INTERACTIVE_PLACER_BASE::m_frame, TOOL_INTERACTIVE::m_menu, INTERACTIVE_PLACER_BASE::m_modifiers, TOOL_BASE::m_toolMgr, module(), PCB_MODULE_T, INTERACTIVE_PLACER_BASE::PlaceItem(), TOOLS_HOLDER::PopTool(), BOARD_COMMIT::Push(), TOOLS_HOLDER::PushTool(), ACTIONS::refreshPreview, KIGFX::PCB_VIEW::Remove(), TOOL_MANAGER::RunAction(), MODULE::RunOnChildren(), selection(), PCB_ACTIONS::selectionClear, KIGFX::VIEW_CONTROLS::SetAutoPan(), EDA_DRAW_PANEL_GAL::SetCurrentCursor(), KIGFX::VIEW_CONTROLS::SetSnapping(), PCB_BASE_FRAME::Settings(), TOOL_MENU::ShowContextMenu(), KIGFX::VIEW_CONTROLS::ShowCursor(), INTERACTIVE_PLACER_BASE::SnapItem(), TC_COMMAND, KIGFX::PCB_VIEW::Update(), PCB_ACTIONS::viaSizeDec, PCB_ACTIONS::viaSizeInc, view(), TOOL_INTERACTIVE::Wait(), VECTOR2< T >::x, and VECTOR2< T >::y.

Referenced by MICROWAVE_TOOL::addMicrowaveFootprint(), DRAWING_TOOL::DrawVia(), and PAD_TOOL::PlacePad().

◆ EditingModules()

bool PCB_TOOL_BASE::EditingModules ( ) const
inline

◆ frame()

PCB_BASE_EDIT_FRAME* PCB_TOOL_BASE::frame ( ) const
inlineprotected

Definition at line 161 of file pcb_tool_base.h.

162  {
163  return getEditFrame<PCB_BASE_EDIT_FRAME>();
164  }

Referenced by POINT_EDITOR::addCorner(), AUTOPLACE_TOOL::autoplace(), canvas(), ZONE_FILLER_TOOL::CheckAllZones(), PNS::TOOL_BASE::checkSnap(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), ROUTER_TOOL::CustomTrackWidthDialog(), FOOTPRINT_EDITOR_TOOLS::DeleteFootprint(), displayOptions(), doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), ROUTER_TOOL::DpDimensionsDialog(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), PCB_EDITOR_CONTROL::ExportSpecctraDSN(), ROUTER_TOOL::finishInteractive(), EDIT_TOOL::Flip(), PCB_EDITOR_CONTROL::FlipPcbView(), GLOBAL_EDIT_TOOL::GlobalDeletions(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PCB_EDITOR_CONTROL::ImportSpecctraSession(), SELECTION_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCBNEW_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::meanderSettingsDialog(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), EDIT_TOOL::pickReferencePoint(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), PAD_TOOL::pushPadSettings(), PAD_TOOL::recombinePad(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), PNS::TOOL_BASE::Reset(), ROUTER_TOOL::SelectCopperLayerPair(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), POINT_EDITOR::setEditedPoint(), ROUTER_TOOL::SettingsDialog(), GLOBAL_EDIT_TOOL::swapBoardItem(), GLOBAL_EDIT_TOOL::SwapLayers(), ROUTER_TOOL::switchLayerOnViaPlacement(), POINT_EDITOR::updateItem(), PCB_EDITOR_CONTROL::UpdateSchematicFromPCB(), ZONE_FILLER_TOOL::ZoneFill(), and ZONE_FILLER_TOOL::ZoneFillAll().

◆ getEditFrame()

template<typename T >
T* TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Function getEditFrame()

Returns the application window object, casted to requested user type.

Definition at line 187 of file tool_base.h.

188  {
189 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
190  wxASSERT( dynamic_cast<T*>( getToolHolderInt() ) );
191 #endif
192  return static_cast<T*>( getToolHolderInt() );
193  }
TOOLS_HOLDER * getToolHolderInt() const
Definition: tool_base.cpp:48

References TOOL_BASE::getToolHolderInt().

Referenced by ZONE_CREATE_HELPER::createNewZone().

◆ GetId()

TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Function GetId() Returns the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 121 of file tool_base.h.

122  {
123  return m_toolId;
124  }
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

◆ GetManager()

TOOL_MANAGER* TOOL_BASE::GetManager ( ) const
inlineinherited

Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.

Returns
Instance of the TOOL_MANAGER. If there is no TOOL_MANAGER associated, it returns NULL.

Definition at line 143 of file tool_base.h.

144  {
145  return m_toolMgr;
146  }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by BOARD_COMMIT::BOARD_COMMIT(), ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), doInteractiveItemPlacement(), ACTION_MENU::getToolManager(), LIB_TREE::onContextMenu(), ZONE_CREATE_HELPER::OnFirstPoint(), ACTION_MENU::OnMenuEvent(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ getModel()

template<typename T >
T* TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Function getModel()

Returns the model object if it matches the requested type.

Definition at line 201 of file tool_base.h.

202  {
203  EDA_ITEM* m = getModelInt();
204 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
205  wxASSERT( dynamic_cast<T*>( m ) );
206 #endif
207  return static_cast<T*>( m );
208  }
EDA_ITEM * getModelInt() const
Definition: tool_base.cpp:54
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: base_struct.h:159

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createZoneFromExisting(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ GetName()

const std::string& TOOL_BASE::GetName ( void  ) const
inlineinherited

Function GetName() Returns the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 132 of file tool_base.h.

133  {
134  return m_toolName;
135  }
std::string m_toolName
Name of the tool.
Definition: tool_base.h:218

References TOOL_BASE::m_toolName.

Referenced by TOOL_MANAGER::dispatchInternal(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), and TOOL_MANAGER::RegisterTool().

◆ GetToolMenu()

◆ GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Function GetType() Returns the type of the tool.

Returns
The type of the tool.

Definition at line 110 of file tool_base.h.

111  {
112  return m_type;
113  }
TOOL_TYPE m_type
Stores the type of the tool.
Definition: tool_base.h:211

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

◆ getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Function getView()

Returns the instance of VIEW object used in the application. It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 36 of file tool_base.cpp.

37 {
38  return m_toolMgr->GetView();
39 }
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:284
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), SCH_EDIT_TOOL::ChangeTextType(), EE_INSPECTION_TOOL::checkPart(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_EDIT_TOOL::DoDelete(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), MICROWAVE_TOOL::drawMicrowaveInductor(), PL_DRAWING_TOOLS::DrawShape(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_EDITOR_CONTROL::FindComponentAndItem(), EE_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCBNEW_CONTROL::GridResetOrigin(), PCBNEW_CONTROL::GridSetOrigin(), SELECTION_TOOL::GuessSelectionCandidates(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), PNS::TOOL_BASE::highlightNet(), PCB_INSPECTION_TOOL::highlightNet(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_MOVE_TOOL::moveItem(), PL_EDIT_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PNS::TOOL_BASE::pickSingleItem(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::Reset(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), DRAWING_TOOL::Reset(), EE_SELECTION_TOOL::Reset(), SELECTION_TOOL::Reset(), EE_TOOL_BASE< SCH_BASE_FRAME >::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), GERBVIEW_SELECTION_TOOL::selectable(), SELECTION_TOOL::Selectable(), PL_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectionContains(), SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::SelectPoint(), EE_SELECTION_TOOL::SelectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), PL_EDITOR_CONTROL::ToggleBackgroundColor(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), SCH_EDITOR_CONTROL::UpdateFind(), EE_POINT_EDITOR::updateItem(), PL_POINT_EDITOR::updateItem(), POINT_EDITOR::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_VIEWER_TOOLS::view(), view(), COMMON_TOOLS::ZoomFitScreen(), SELECTION_TOOL::zoomFitSelection(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and SELECTION_TOOL::~SELECTION_TOOL().

◆ getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Function getViewControls()

Returns the instance of VIEW_CONTROLS object used in the application. It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.)

Returns
The instance of VIEW_CONTROLS.

Definition at line 42 of file tool_base.cpp.

43 {
44  return m_toolMgr->GetViewControls();
45 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:286

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), SCH_EDITOR_CONTROL::AssignNetclass(), SCH_EDIT_TOOL::BreakWire(), controls(), COMMON_TOOLS::CursorControl(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), LENGTH_TUNER_TOOL::performTuning(), LIB_DRAWING_TOOLS::PlaceAnchor(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), POINT_EDITOR::Reset(), DRAWING_TOOL::Reset(), COMMON_TOOLS::ResetLocalCoords(), GERBVIEW_SELECTION_TOOL::selectCursor(), SELECTION_TOOL::selectCursor(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCBNEW_PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateItem(), LIB_MOVE_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

◆ Go()

template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited

Function Go()

Defines which state (aStateFunc) to go when a certain event arrives (aConditions). No conditions means any event.

Definition at line 129 of file tool_interactive.h.

131 {
132  TOOL_STATE_FUNC sptr = std::bind( aStateFunc, static_cast<T*>( this ), std::placeholders::_1 );
133 
134  goInternal( sptr, aConditions );
135 }
std::function< int(const TOOL_EVENT &)> TOOL_STATE_FUNC
Definition: tool_base.h:58
void goInternal(TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)

References TOOL_INTERACTIVE::goInternal().

Referenced by LENGTH_TUNER_TOOL::setTransitions(), ZOOM_TOOL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), PCB_REANNOTATE_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), LIB_PIN_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), PL_DRAWING_TOOLS::setTransitions(), EE_POINT_EDITOR::setTransitions(), ZONE_FILLER_TOOL::setTransitions(), PL_POINT_EDITOR::setTransitions(), COMMON_CONTROL::setTransitions(), LIB_MOVE_TOOL::setTransitions(), KICAD_MANAGER_CONTROL::setTransitions(), LIB_DRAWING_TOOLS::setTransitions(), SCH_MOVE_TOOL::setTransitions(), MICROWAVE_TOOL::setTransitions(), PCB_VIEWER_TOOLS::setTransitions(), POINT_EDITOR::setTransitions(), GLOBAL_EDIT_TOOL::setTransitions(), GERBVIEW_CONTROL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::setTransitions(), LIB_EDIT_TOOL::setTransitions(), PL_EDITOR_CONTROL::setTransitions(), LIB_CONTROL::setTransitions(), PL_EDIT_TOOL::setTransitions(), PAD_TOOL::setTransitions(), FOOTPRINT_EDITOR_TOOLS::setTransitions(), SCH_EDIT_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), COMMON_TOOLS::setTransitions(), PCBNEW_CONTROL::setTransitions(), EDA_3D_CONTROLLER::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), PCB_INSPECTION_TOOL::setTransitions(), SCH_LINE_WIRE_BUS_TOOL::setTransitions(), CVPCB_CONTROL::setTransitions(), CVPCB_ASSOCIATION_TOOL::setTransitions(), PCBNEW_PICKER_TOOL::setTransitions(), PICKER_TOOL::setTransitions(), PCB_EDITOR_CONTROL::setTransitions(), DRC::setTransitions(), EDIT_TOOL::setTransitions(), DRAWING_TOOL::setTransitions(), SELECTION_TOOL::setTransitions(), PL_SELECTION_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), and EE_SELECTION_TOOL::setTransitions().

◆ Init()

bool PCB_TOOL_BASE::Init ( void  )
overridevirtual

Function Init() Init() is called once upon a registration of the tool.

Returns
True if the initialization went fine, false - otherwise.

Reimplemented from TOOL_BASE.

Reimplemented in EDIT_TOOL, SELECTION_TOOL, DRAWING_TOOL, POSITION_RELATIVE_TOOL, PCB_EDITOR_CONTROL, POINT_EDITOR, FOOTPRINT_EDITOR_TOOLS, GLOBAL_EDIT_TOOL, PAD_TOOL, PCB_INSPECTION_TOOL, PCB_REANNOTATE_TOOL, and ROUTER_TOOL.

Definition at line 237 of file pcb_tool_base.cpp.

238 {
239  // A basic context manu. Many (but not all) tools will choose to override this.
240 
241  auto& ctxMenu = m_menu.GetMenu();
242 
243  // cancel current tool goes in main context menu at the top if present
245  ctxMenu.AddSeparator( 1 );
246 
247  // Finally, add the standard zoom/grid items
248  getEditFrame<PCB_BASE_FRAME>()->AddStandardSubMenus( m_menu );
249 
250  return true;
251 }
static bool ShowAlways(const SELECTION &aSelection)
Function ShowAlways The default condition function (always returns true).
TOOL_MENU m_menu
functions below are not yet implemented - their interface may change
CONDITIONAL_MENU & GetMenu()
Function GetMenu.
Definition: tool_menu.cpp:46
static TOOL_ACTION cancelInteractive
Definition: actions.h:65
void AddItem(const TOOL_ACTION &aAction, const SELECTION_CONDITION &aCondition, int aOrder=ANY_ORDER)
Function AddItem()

References CONDITIONAL_MENU::AddItem(), ACTIONS::cancelInteractive, TOOL_MENU::GetMenu(), TOOL_INTERACTIVE::m_menu, and SELECTION_CONDITIONS::ShowAlways().

◆ IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 31 of file tool_base.cpp.

32 {
33  return m_toolMgr->IsToolActive( m_toolId );
34 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool IsToolActive(TOOL_ID aId) const
Function IsToolActive() Returns true if a tool with given id is active (executing)

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by EDIT_TOOL::isRouterActive(), and ROUTER_TOOL::onViaCommand().

◆ module()

◆ Reset()

void PCB_TOOL_BASE::Reset ( RESET_REASON  aReason)
overridevirtual

Function Reset() Brings the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Implements TOOL_BASE.

Reimplemented in DRC, SELECTION_TOOL, EDIT_TOOL, MICROWAVE_TOOL, DRAWING_TOOL, PCBNEW_PICKER_TOOL, PCBNEW_CONTROL, PNS::TOOL_BASE, POSITION_RELATIVE_TOOL, PCB_EDITOR_CONTROL, POINT_EDITOR, PCB_INSPECTION_TOOL, FOOTPRINT_EDITOR_TOOLS, ZONE_FILLER_TOOL, GLOBAL_EDIT_TOOL, PAD_TOOL, PCB_REANNOTATE_TOOL, LENGTH_TUNER_TOOL, and ROUTER_TOOL.

Definition at line 254 of file pcb_tool_base.cpp.

255 {
256 }

◆ RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Function RunMainStack()

Calls a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 87 of file tool_interactive.cpp.

88 {
89  m_toolMgr->RunMainStack( this, std::move( aFunc ) );
90 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

◆ selection() [1/2]

const PCBNEW_SELECTION & PCB_TOOL_BASE::selection ( ) const
protected

Definition at line 275 of file pcb_tool_base.cpp.

276 {
277  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
278  const auto& selection = selTool->GetSelection();
279  return selection;
280 }
SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
const PCBNEW_SELECTION & selection() const

References TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplaceSelected(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), EDIT_TOOL::ChangeTrackWidth(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), EDIT_TOOL::CreateArray(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), PCB_INSPECTION_TOOL::doHideNet(), doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawZone(), EDIT_TOOL::Duplicate(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::filterSelection(), EDIT_TOOL::Flip(), DRAWING_TOOL::getSourceZoneForAction(), PCB_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), PAD_TOOL::pastePadProperties(), PCBNEW_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceImportedGraphics(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::PositionRelative(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), GLOBAL_EDIT_TOOL::RemoveUnusedPads(), EDIT_TOOL::Rotate(), selection(), SELECTION_TOOL::selectNet(), DRAWING_TOOL::SetAnchor(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), PCB_EDITOR_CONTROL::ZoneDuplicate(), ZONE_FILLER_TOOL::ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfill().

◆ selection() [2/2]

PCBNEW_SELECTION & PCB_TOOL_BASE::selection ( )
protected

Definition at line 283 of file pcb_tool_base.cpp.

284 {
285  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
286  auto& selection = selTool->GetSelection();
287  return selection;
288 }
SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
const PCBNEW_SELECTION & selection() const

References TOOL_MANAGER::GetTool(), TOOL_BASE::m_toolMgr, and selection().

◆ SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Function SetContextMenu()

Assigns a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 76 of file tool_interactive.cpp.

77 {
78  if( aMenu )
79  aMenu->SetTool( this );
80  else
81  aTrigger = CMENU_OFF;
82 
83  m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
84 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void SetTool(TOOL_INTERACTIVE *aTool)
Function SetTool() Sets a tool that is the creator of the menu.
void ScheduleContextMenu(TOOL_BASE *aTool, ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Sets behaviour of the tool's context popup menu.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), TOOL_MENU::ShowContextMenu(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ SetEditModules()

void PCB_TOOL_BASE::SetEditModules ( bool  aEnabled)
inline

Function SetEditModules()

Toggles edit module mode. When enabled, one may select parts of modules individually (graphics, pads, etc.), so they can be modified.

Parameters
aEnableddecides if the mode should be enabled.

Definition at line 101 of file pcb_tool_base.h.

102  {
103  m_editModules = aEnabled;
104  }

References m_editModules.

◆ setTransitions()

void PCB_TOOL_BASE::setTransitions ( )
overrideprotectedvirtual

This method is meant to be overridden in order to specify handlers for events.

It is called every time tool is reset or finished.

Implements TOOL_INTERACTIVE.

Reimplemented in SELECTION_TOOL, DRAWING_TOOL, EDIT_TOOL, DRC, PCB_EDITOR_CONTROL, PCBNEW_PICKER_TOOL, PCB_INSPECTION_TOOL, PCBNEW_CONTROL, POSITION_RELATIVE_TOOL, FOOTPRINT_EDITOR_TOOLS, PAD_TOOL, GLOBAL_EDIT_TOOL, MICROWAVE_TOOL, POINT_EDITOR, ZONE_FILLER_TOOL, ROUTER_TOOL, PCB_REANNOTATE_TOOL, AUTOPLACE_TOOL, and LENGTH_TUNER_TOOL.

Definition at line 259 of file pcb_tool_base.cpp.

260 {
261 }

◆ view()

◆ Wait()

TOOL_EVENT * TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Function Wait()

Suspends execution of the tool until an event specified in aEventList arrives. No parameters means waiting for any event.

Definition at line 57 of file tool_interactive.cpp.

58 {
59  return m_toolMgr->ScheduleWait( this, aEventList );
60 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_EVENT * ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pauses execution of a given tool until one or more events matching aConditions arrives.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), ROUTER_TOOL::InlineDrag(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), EDIT_TOOL::pickReferencePoint(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

Member Data Documentation

◆ m_editModules

◆ m_menu

TOOL_MENU TOOL_INTERACTIVE::m_menu
protectedinherited

functions below are not yet implemented - their interface may change

Definition at line 108 of file tool_interactive.h.

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), TOOL_INTERACTIVE::GetToolMenu(), PICKER_TOOL::Init(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Init(), PL_EDIT_TOOL::Init(), SCH_EDIT_TOOL::Init(), LIB_DRAWING_TOOLS::Init(), PCB_VIEWER_TOOLS::Init(), FOOTPRINT_EDITOR_TOOLS::Init(), PL_DRAWING_TOOLS::Init(), LIB_CONTROL::Init(), PCB_EDITOR_CONTROL::Init(), SCH_DRAWING_TOOLS::Init(), EDA_3D_CONTROLLER::Init(), GERBVIEW_SELECTION_TOOL::Init(), PL_SELECTION_TOOL::Init(), DRAWING_TOOL::Init(), EE_SELECTION_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), SELECTION_TOOL::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), Init(), PL_EDIT_TOOL::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ m_toolId

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 214 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

◆ m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 219 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), PL_SELECTION_TOOL::AddItemsToSel(), EE_SELECTION_TOOL::AddItemsToSel(), PL_SELECTION_TOOL::AddItemToSel(), EE_SELECTION_TOOL::AddItemToSel(), SELECTION_TOOL::AddItemToSel(), SCH_EDITOR_CONTROL::AssignNetclass(), CVPCB_ASSOCIATION_TOOL::Associate(), TOOL_BASE::attachManager(), SCH_EDIT_TOOL::AutoplaceFields(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), PCB_INSPECTION_TOOL::ClearHighlight(), SCH_EDITOR_CONTROL::ClearHighlight(), SELECTION_TOOL::ClearSelection(), PL_SELECTION_TOOL::ClearSelection(), GERBVIEW_SELECTION_TOOL::clearSelection(), EE_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TOOL::ConvertDeMorgan(), LIB_EDIT_TOOL::Copy(), PL_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), MICROWAVE_TOOL::createInductorBetween(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), COMMON_TOOLS::CursorControl(), SCH_EDITOR_CONTROL::Cut(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), LIB_EDIT_TOOL::DoDelete(), SCH_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_INSPECTION_TOOL::doHideNet(), doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawRectangle(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), LIB_EDIT_TOOL::editGraphicProperties(), PAD_TOOL::EditPad(), LIB_EDIT_TOOL::editSymbolProperties(), SCH_EDITOR_CONTROL::EditWithLibEdit(), SCH_EDITOR_CONTROL::EnterSheet(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandConnection(), PAD_TOOL::explodePad(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::findCallback(), SCH_EDITOR_CONTROL::FindComponentAndItem(), POINT_EDITOR::finishItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getToolHolderInt(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), PCBNEW_CONTROL::GridSetOrigin(), GERBVIEW_CONTROL::HighlightControl(), PCB_INSPECTION_TOOL::HighlightItem(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::ImportWorksheetContent(), LIB_EDIT_TOOL::Init(), PL_EDIT_TOOL::Init(), SCH_EDIT_TOOL::Init(), PCB_INSPECTION_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), PAD_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), PL_DRAWING_TOOLS::Init(), LIB_CONTROL::Init(), PL_POINT_EDITOR::Init(), POINT_EDITOR::Init(), PCB_EDITOR_CONTROL::Init(), POSITION_RELATIVE_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isInteractiveDragEnabled(), EDIT_TOOL::isRouterActive(), TOOL_BASE::IsToolActive(), SCH_EDITOR_CONTROL::LeaveSheet(), COMMON_CONTROL::ListHotKeys(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), LIB_CONTROL::OnDeMorgan(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), EDIT_TOOL::pickReferencePoint(), LIB_EDIT_TOOL::PinTable(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), PCBNEW_CONTROL::Print(), GERBVIEW_CONTROL::Print(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EE_SELECTION_TOOL::RebuildSelection(), LIB_EDIT_TOOL::Redo(), SCH_EDITOR_CONTROL::Redo(), SCH_EDIT_TOOL::RefreshSymbolFromLibrary(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), PL_SELECTION_TOOL::RemoveItemFromSel(), EE_SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemFromSel(), PL_SELECTION_TOOL::RemoveItemsFromSel(), EE_SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_DRAWING_TOOLS::RepeatDrawItem(), EE_SELECTION_TOOL::RequestSelection(), SELECTION_TOOL::RequestSelection(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), TOOL_INTERACTIVE::RunMainStack(), DRC::RunTests(), EE_SELECTION_TOOL::SelectConnection(), selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), SELECTION_TOOL::SelectItems(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectNet(), PL_SELECTION_TOOL::SelectPoint(), GERBVIEW_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::SelectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), SELECTION_TOOL::selectSameSheet(), SELECTION_TOOL::selectSheetContents(), DRAWING_TOOL::SetAnchor(), TOOL_INTERACTIVE::SetContextMenu(), DRC::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), EDA_3D_CONTROLLER::ToggleVisibility(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), LIB_EDIT_TOOL::Undo(), SCH_EDITOR_CONTROL::Undo(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SELECTION_TOOL::UnselectItems(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), PCB_EDITOR_CONTROL::ZoneDuplicate(), and PCB_EDITOR_CONTROL::ZoneMerge().

◆ m_toolName

std::string TOOL_BASE::m_toolName
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 218 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

◆ m_type

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Stores the type of the tool.

Definition at line 211 of file tool_base.h.

Referenced by TOOL_BASE::GetType(), and BOARD_COMMIT::Push().


The documentation for this class was generated from the following files: