KiCad PCB EDA Suite
DRC_TOOL Class Reference

#include <drc_tool.h>

Inheritance diagram for DRC_TOOL:
PCB_TOOL_BASE TOOL_INTERACTIVE TOOL_BASE

Public Types

enum  RESET_REASON { RUN, MODEL_RELOAD, GAL_SWITCH }
 

Determines the reason of reset for a tool

More...
 

Public Member Functions

 DRC_TOOL ()
 
 ~DRC_TOOL ()
 
void Reset (RESET_REASON aReason) override
 Function Reset() Brings the tool to a known, initial state. More...
 
void ShowDRCDialog (wxWindow *aParent)
 Open a dialog and prompts the user, then if a test run button is clicked, runs the test(s) and creates the MARKERS. More...
 
int ShowDRCDialog (const TOOL_EVENT &aEvent)
 
bool IsDRCDialogShown ()
 Check to see if the DRC_TOOL dialog is currently shown. More...
 
bool IsDRCRunning () const
 Check to see if the DRC engine is running the tests. More...
 
void DestroyDRCDialog ()
 Closes and frees the DRC dialog. More...
 
std::shared_ptr< DRC_ENGINEGetDRCEngine ()
 
void RunTests (PROGRESS_REPORTER *aProgressReporter, bool aTestTracksAgainstZones, bool aRefillZones, bool aReportAllTrackErrors, bool aTestFootprints)
 Run the DRC tests. More...
 
virtual bool Init () override
 Function Init() Init() is called once upon a registration of the tool. More...
 
void SetEditModules (bool aEnabled)
 Function SetEditModules() More...
 
bool EditingModules () const
 
void Activate ()
 Function Activate() Runs the tool. More...
 
TOOL_MENUGetToolMenu ()
 
void SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Function SetContextMenu() More...
 
void RunMainStack (std::function< void()> aFunc)
 Function RunMainStack() More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Go() More...
 
TOOL_EVENTWait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Wait() More...
 
TOOL_TYPE GetType () const
 Function GetType() Returns the type of the tool. More...
 
TOOL_ID GetId () const
 Function GetId() Returns the unique identifier of the tool. More...
 
const std::string & GetName () const
 Function GetName() Returns the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool. More...
 
bool IsToolActive () const
 

Protected Types

enum  INTERACTIVE_PLACEMENT_OPTIONS { IPO_ROTATE = 0x01, IPO_FLIP = 0x02, IPO_SINGLE_CLICK = 0x04, IPO_REPEAT = 0x08 }
 Options for placing items interactively. More...
 

Protected Member Functions

void doInteractiveItemPlacement (const std::string &aTool, INTERACTIVE_PLACER_BASE *aPlacer, const wxString &aCommitMessage, int aOptions=IPO_ROTATE|IPO_FLIP|IPO_REPEAT)
 Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc. More...
 
KIGFX::PCB_VIEWview () const
 
KIGFX::VIEW_CONTROLScontrols () const
 
PCB_BASE_EDIT_FRAMEframe () const
 
BOARDboard () const
 
MODULEmodule () const
 
const PCB_DISPLAY_OPTIONSdisplayOptions () const
 
PCB_DRAW_PANEL_GALcanvas () const
 
const PCBNEW_SELECTIONselection () const
 
PCBNEW_SELECTIONselection ()
 
void attachManager (TOOL_MANAGER *aManager)
 Function attachManager() More...
 
KIGFX::VIEWgetView () const
 Function getView() More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Function getViewControls() More...
 
template<typename T >
T * getEditFrame () const
 Function getEditFrame() More...
 
template<typename T >
T * getModel () const
 Function getModel() More...
 

Protected Attributes

bool m_editModules
 
TOOL_MENU m_menu
 functions below are not yet implemented - their interface may change More...
 
TOOL_TYPE m_type
 

Stores the type of the tool.

More...
 
TOOL_ID m_toolId
 

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

More...
 
std::string m_toolName
 

Name of the tool.

More...
 
TOOL_MANAGERm_toolMgr
 

Private Member Functions

void setTransitions () override
 

Sets up handlers for various events.

More...
 
void updatePointers ()
 Update needed pointers from the one pointer which is known not to change. More...
 
EDA_UNITS userUnits () const
 

Private Attributes

PCB_EDIT_FRAMEm_editFrame
 
BOARDm_pcb
 
DIALOG_DRCm_drcDialog
 
bool m_drcRunning
 
std::shared_ptr< DRC_ENGINEm_drcEngine
 
std::vector< std::shared_ptr< DRC_ITEM > > m_unconnected
 
std::vector< std::shared_ptr< DRC_ITEM > > m_footprints
 

Detailed Description

Definition at line 45 of file drc_tool.h.

Member Enumeration Documentation

◆ INTERACTIVE_PLACEMENT_OPTIONS

Options for placing items interactively.

Enumerator
IPO_ROTATE 

Handle the rotate action in the loop by calling the item's rotate method.

IPO_FLIP 

Handle flip action in the loop by calling the item's flip method.

IPO_SINGLE_CLICK 

Create an item immediately on placement starting, otherwise show the pencil cursor until the item is created.

IPO_REPEAT 

Allow repeat placement of the item.

Definition at line 116 of file pcb_tool_base.h.

116  {
118  IPO_ROTATE = 0x01,
119 
121  IPO_FLIP = 0x02,
122 
125  IPO_SINGLE_CLICK = 0x04,
126 
128  IPO_REPEAT = 0x08
129  };
Handle flip action in the loop by calling the item's flip method.
Allow repeat placement of the item.
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
Handle the rotate action in the loop by calling the item's rotate method.

◆ RESET_REASON

enum TOOL_BASE::RESET_REASON
inherited

Determines the reason of reset for a tool

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

Definition at line 79 of file tool_base.h.

80  {
81  RUN,
82  MODEL_RELOAD,
83  GAL_SWITCH
84  };
Model changes (required full reload)
Definition: tool_base.h:82
Tool is invoked after being inactive.
Definition: tool_base.h:81
Rendering engine changes.
Definition: tool_base.h:83

Constructor & Destructor Documentation

◆ DRC_TOOL()

DRC_TOOL::DRC_TOOL ( )

Definition at line 38 of file drc_tool.cpp.

38  :
39  PCB_TOOL_BASE( "pcbnew.DRCTool" ),
40  m_editFrame( nullptr ),
41  m_pcb( nullptr ),
42  m_drcDialog( nullptr ),
43  m_drcRunning( false )
44 {
45 }
PCB_EDIT_FRAME * m_editFrame
Definition: drc_tool.h:55
BOARD * m_pcb
Definition: drc_tool.h:56
bool m_drcRunning
Definition: drc_tool.h:58
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57
PCB_TOOL_BASE(TOOL_ID aId, const std::string &aName)
Constructor.
Definition: pcb_tool_base.h:75

◆ ~DRC_TOOL()

DRC_TOOL::~DRC_TOOL ( )

Definition at line 48 of file drc_tool.cpp.

49 {
50 }

Member Function Documentation

◆ Activate()

void TOOL_INTERACTIVE::Activate ( )
inherited

Function Activate() Runs the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 51 of file tool_interactive.cpp.

52 {
54 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool InvokeTool(TOOL_ID aToolId)
Function InvokeTool() Calls a tool by sending a tool activation event to tool of given ID.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), EDIT_TOOL::copyToClipboard(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), PAD_TOOL::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), LIB_TREE::onContextMenu(), POINT_EDITOR::OnSelectionChange(), GROUP_TOOL::PickNewMember(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Function attachManager()

Sets the TOOL_MANAGER the tool will belong to. Called by TOOL_MANAGER::RegisterTool()

Definition at line 60 of file tool_base.cpp.

61 {
62  m_toolMgr = aManager;
63 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

◆ board()

BOARD* PCB_TOOL_BASE::board ( ) const
inlineprotectedinherited

Definition at line 166 of file pcb_tool_base.h.

166 { return getModel<BOARD>(); }

Referenced by PCBNEW_CONTROL::AppendBoard(), AUTOPLACE_TOOL::autoplace(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), EDIT_TOOL::ChangeTrackWidth(), ZONE_FILLER_TOOL::CheckAllZones(), PCB_INSPECTION_TOOL::ClearHighlight(), EDIT_TOOL::copyToClipboard(), MICROWAVE_TOOL::createInductorBetween(), ROUTER_TOOL::CustomTrackWidthDialog(), PCBNEW_CONTROL::DeleteItemCursor(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawSegment(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), ZONE_FILLER_TOOL::FillAllZones(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::GetBoard(), SELECTION_TOOL::getCollectorsGuide(), GROUP_TOOL::Group(), PCB_INSPECTION_TOOL::highlightNet(), PCBNEW_CONTROL::LayerNext(), PCBNEW_CONTROL::LayerPrev(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PCB_TOOL_BASE::module(), EDIT_TOOL::MoveExact(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::Paste(), PCBNEW_CONTROL::placeBoardItems(), PCB_EDITOR_CONTROL::PlaceModule(), PAD_TOOL::PlacePad(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), SELECTION_TOOL::RebuildSelection(), PAD_TOOL::recombinePad(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::RepairBoard(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), SELECTION_TOOL::Selectable(), SELECTION_TOOL::selectAllItemsOnNet(), SELECTION_TOOL::selectAllItemsOnSheet(), SELECTION_TOOL::selectConnectedTracks(), SELECTION_TOOL::selectPoint(), PCBNEW_CONTROL::TrackDisplayMode(), GROUP_TOOL::Ungroup(), PCBNEW_CONTROL::ViaDisplayMode(), PCBNEW_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfillAll().

◆ canvas()

◆ controls()

◆ DestroyDRCDialog()

void DRC_TOOL::DestroyDRCDialog ( )

Closes and frees the DRC dialog.

Definition at line 132 of file drc_tool.cpp.

133 {
134  if( m_drcDialog )
135  {
136  m_drcDialog->Destroy();
137  m_drcDialog = nullptr;
138  }
139 }
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57

References m_drcDialog.

Referenced by DIALOG_DRC::OnActivateDlg(), DIALOG_DRC::OnCancelClick(), DIALOG_PLOT::onRunDRC(), and Reset().

◆ displayOptions()

const PCB_DISPLAY_OPTIONS & PCB_TOOL_BASE::displayOptions ( ) const
protectedinherited

◆ doInteractiveItemPlacement()

void PCB_TOOL_BASE::doInteractiveItemPlacement ( const std::string &  aTool,
INTERACTIVE_PLACER_BASE aPlacer,
const wxString &  aCommitMessage,
int  aOptions = IPO_ROTATE | IPO_FLIP | IPO_REPEAT 
)
protectedinherited

Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.

More complex interactive processes are not supported here, you should implement a customised event loop for those.

Parameters
aItemCreatorthe callable that will attempt to create the item
aCommitMessagethe message used on a successful commit

Definition at line 37 of file pcb_tool_base.cpp.

40 {
41  using namespace std::placeholders;
42  std::unique_ptr<BOARD_ITEM> newItem;
43 
44  frame()->PushTool( aTool );
45  Activate();
46 
47  BOARD_COMMIT commit( frame() );
48 
50 
51  // do not capture or auto-pan until we start placing an item
52  controls()->ShowCursor( true );
53 
54  // Add a VIEW_GROUP that serves as a preview for the new item
55  PCBNEW_SELECTION preview;
56  view()->Add( &preview );
57 
58  aPlacer->m_board = board();
59  aPlacer->m_frame = frame();
60  aPlacer->m_modifiers = 0;
61 
62  auto makeNewItem = [&] ( VECTOR2I aPosition )
63  {
64  if( frame()->GetModel() )
65  newItem = aPlacer->CreateItem();
66 
67  if( newItem )
68  {
69  newItem->SetPosition( (wxPoint) aPosition );
70  preview.Add( newItem.get() );
71 
72  if( newItem->Type() == PCB_MODULE_T )
73  {
74  auto module = dyn_cast<MODULE*>( newItem.get() );
75 
76  // footprints have more drawable parts
77  module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
78  }
79  }
80  };
81 
82  if( aOptions & IPO_SINGLE_CLICK )
83  makeNewItem( controls()->GetCursorPosition() );
84 
85  auto setCursor =
86  [&]()
87  {
88  if( !newItem )
90  else
92  };
93 
94  // Set initial cursor
95  setCursor();
96 
97  // Main loop: keep receiving events
98  while( TOOL_EVENT* evt = Wait() )
99  {
100  setCursor();
101 
102  VECTOR2I cursorPos = controls()->GetCursorPosition();
103  aPlacer->m_modifiers = evt->Modifier();
104 
105  auto cleanup = [&] ()
106  {
107  newItem = nullptr;
108  preview.Clear();
109  view()->Update( &preview );
110  controls()->SetAutoPan( false );
111  controls()->CaptureCursor( false );
112  controls()->ShowCursor( true );
113  };
114 
115  if( evt->IsCancelInteractive() )
116  {
117  if( aOptions & IPO_SINGLE_CLICK )
118  {
119  cleanup();
120  frame()->PopTool( aTool );
121  break;
122  }
123  else if( newItem )
124  cleanup();
125  else
126  {
127  frame()->PopTool( aTool );
128  break;
129  }
130  }
131  else if( evt->IsActivate() )
132  {
133  if( newItem )
134  cleanup();
135 
136  if( evt->IsPointEditor() )
137  {
138  // don't exit (the point editor runs in the background)
139  }
140  else if( evt->IsMoveTool() )
141  {
142  // leave ourselves on the stack so we come back after the move
143  break;
144  }
145  else
146  {
147  frame()->PopTool( aTool );
148  break;
149  }
150  }
151  else if( evt->IsClick( BUT_LEFT ) )
152  {
153  if( !newItem )
154  {
155  // create the item if possible
156  makeNewItem( cursorPos );
157 
158  // no item created, so wait for another click
159  if( !newItem )
160  continue;
161 
162  controls()->CaptureCursor( true );
163  controls()->SetAutoPan( true );
164  }
165  else
166  {
167  auto oldFlags = newItem->GetFlags();
168  newItem->ClearFlags();
169 
170  if( !aPlacer->PlaceItem( newItem.get(), commit ) )
171  {
172  newItem->SetFlags( oldFlags );
173  continue;
174  }
175 
176  preview.Clear();
177  newItem.release();
178  commit.Push( aCommitMessage );
179 
180  controls()->CaptureCursor( false );
181  controls()->SetAutoPan( false );
182  controls()->ShowCursor( true );
183 
184  if( !( aOptions & IPO_REPEAT ) )
185  break;
186 
187  if( aOptions & IPO_SINGLE_CLICK )
188  makeNewItem( controls()->GetCursorPosition() );
189 
190  setCursor();
191  }
192  }
193  else if( evt->IsClick( BUT_RIGHT ) )
194  {
196  }
197  else if( evt->IsAction( &PCB_ACTIONS::trackViaSizeChanged ) )
198  {
200  }
201  else if( newItem && evt->Category() == TC_COMMAND )
202  {
203  /*
204  * Handle any events that can affect the item as we move it around
205  */
206  if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) && ( aOptions & IPO_ROTATE ) )
207  {
208  const int rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle( *frame(), *evt );
209  newItem->Rotate( newItem->GetPosition(), rotationAngle );
210  view()->Update( &preview );
211  }
212  else if( evt->IsAction( &PCB_ACTIONS::flip ) && ( aOptions & IPO_FLIP ) )
213  {
214  newItem->Flip( newItem->GetPosition(), frame()->Settings().m_FlipLeftRight );
215  view()->Update( &preview );
216  }
217  else if( evt->IsAction( &PCB_ACTIONS::viaSizeInc )
218  || evt->IsAction( &PCB_ACTIONS::viaSizeDec ) )
219  {
220  // Refresh preview after event runs
222  }
223  else if( evt->IsAction( &ACTIONS::refreshPreview ) )
224  {
225  preview.Clear();
226  newItem.release();
227 
228  makeNewItem( (wxPoint) cursorPos );
229  aPlacer->SnapItem( newItem.get() );
230  view()->Update( &preview );
231  }
232  }
233 
234  else if( newItem && evt->IsMotion() )
235  {
236  // track the cursor
237  newItem->SetPosition( (wxPoint) cursorPos );
238  aPlacer->SnapItem( newItem.get() );
239 
240  // Show a preview of the item
241  view()->Update( &preview );
242  }
243 
244  else
245  evt->SetPassEvent();
246  }
247 
248  view()->Remove( &preview );
249 }
static TOOL_ACTION selectionClear
Clears the current selection.
Definition: pcb_actions.h:62
virtual void ShowCursor(bool aEnabled)
Function ShowCursor() Enables or disables display of cursor.
TOOL_MENU m_menu
functions below are not yet implemented - their interface may change
virtual void Clear() override
Function Clear() Removes all the stored items from the group.
Definition: selection.h:95
TOOL_EVENT * Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Function Wait()
virtual bool PlaceItem(BOARD_ITEM *aItem, BOARD_COMMIT &aCommit)
Handle flip action in the loop by calling the item's flip method.
BOARD * board() const
static TOOL_ACTION viaSizeInc
Definition: pcb_actions.h:296
virtual std::unique_ptr< BOARD_ITEM > CreateItem()=0
PCB_DRAW_PANEL_GAL * GetCanvas() const override
Return a pointer to GAL-based canvas of given EDA draw frame.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
virtual void PushTool(const std::string &actionName)
NB: the definition of "tool" is different at the user level.
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Function RunAction() Runs the specified action.
Definition: tool_manager.h:141
static TOOL_ACTION trackViaSizeChanged
Definition: pcb_actions.h:299
bool IsRotateToolEvt(const TOOL_EVENT &aEvt)
Function isRotateToolEvt()
void SetCurrentCursor(KICURSOR cursor)
Function SetCurrentCursor Set the current cursor shape for this panel.
virtual void Remove(VIEW_ITEM *aItem) override
Function Remove() Removes a VIEW_ITEM from the view.
Definition: pcb_view.cpp:76
virtual void Add(EDA_ITEM *aItem)
Definition: selection.h:76
TOOL_MANAGER * GetManager() const
Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.
Definition: tool_base.h:143
PCB_BASE_EDIT_FRAME * frame() const
virtual void SnapItem(BOARD_ITEM *aItem)
class MODULE, a footprint
Definition: typeinfo.h:89
virtual void Update(const VIEW_ITEM *aItem, int aUpdateFlags) const override
For dynamic VIEWs, informs the associated VIEW that the graphical representation of this item has cha...
Definition: pcb_view.cpp:93
const PCBNEW_SELECTION & selection() const
Allow repeat placement of the item.
virtual void PopTool(const std::string &actionName)
virtual void CaptureCursor(bool aEnabled)
Function CaptureCursor() Forces the cursor to stay within the drawing panel area.
TOOL_EVENT.
Definition: tool_event.h:171
KIGFX::PCB_VIEW * view() const
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
virtual void Add(VIEW_ITEM *aItem)
Function Add() Adds an item to the group.
Definition: view_group.cpp:55
virtual void SetAutoPan(bool aEnabled)
Function SetAutoPan Turns on/off auto panning (this feature is used when there is a tool active (eg.
virtual BOARD_ITEM_CONTAINER * GetModel() const =0
Function GetModel()
void RunOnChildren(const std::function< void(BOARD_ITEM *)> &aFunction) const
Function RunOnChildren.
static TOOL_ACTION flip
Flipping of selected objects.
Definition: pcb_actions.h:108
Handle the rotate action in the loop by calling the item's rotate method.
KIGFX::VIEW_CONTROLS * controls() const
MODULE * module() const
PCBNEW_SETTINGS & Settings()
void Activate()
Function Activate() Runs the tool.
virtual void Add(VIEW_ITEM *aItem, int aDrawPriority=-1) override
Function Add() Adds a VIEW_ITEM to the view.
Definition: pcb_view.cpp:59
PCB_BASE_EDIT_FRAME * m_frame
Definition: pcb_tool_base.h:62
int GetEventRotationAngle(const PCB_BASE_EDIT_FRAME &aFrame, const TOOL_EVENT &aEvt)
Function getEventRotationAngle()
void ShowContextMenu(SELECTION &aSelection)
Function ShowContextMenu.
Definition: tool_menu.cpp:59
static TOOL_ACTION viaSizeDec
Definition: pcb_actions.h:297
static TOOL_ACTION refreshPreview
Definition: actions.h:104
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.

References TOOL_INTERACTIVE::Activate(), KIGFX::PCB_VIEW::Add(), KIGFX::VIEW_GROUP::Add(), SELECTION::Add(), PCB_TOOL_BASE::board(), BUT_LEFT, BUT_RIGHT, KIGFX::VIEW_CONTROLS::CaptureCursor(), SELECTION::Clear(), PCB_TOOL_BASE::controls(), INTERACTIVE_PLACER_BASE::CreateItem(), PCB_ACTIONS::flip, PCB_TOOL_BASE::frame(), PCB_BASE_FRAME::GetCanvas(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), TOOL_EVT_UTILS::GetEventRotationAngle(), TOOL_BASE::GetManager(), PCB_BASE_FRAME::GetModel(), PCB_TOOL_BASE::IPO_FLIP, PCB_TOOL_BASE::IPO_REPEAT, PCB_TOOL_BASE::IPO_ROTATE, PCB_TOOL_BASE::IPO_SINGLE_CLICK, TOOL_EVT_UTILS::IsRotateToolEvt(), INTERACTIVE_PLACER_BASE::m_board, PCBNEW_SETTINGS::m_FlipLeftRight, INTERACTIVE_PLACER_BASE::m_frame, TOOL_INTERACTIVE::m_menu, INTERACTIVE_PLACER_BASE::m_modifiers, TOOL_BASE::m_toolMgr, PCB_TOOL_BASE::module(), PCB_MODULE_T, PENCIL, PLACE, INTERACTIVE_PLACER_BASE::PlaceItem(), TOOLS_HOLDER::PopTool(), BOARD_COMMIT::Push(), TOOLS_HOLDER::PushTool(), ACTIONS::refreshPreview, KIGFX::PCB_VIEW::Remove(), TOOL_MANAGER::RunAction(), MODULE::RunOnChildren(), PCB_TOOL_BASE::selection(), PCB_ACTIONS::selectionClear, KIGFX::VIEW_CONTROLS::SetAutoPan(), EDA_DRAW_PANEL_GAL::SetCurrentCursor(), PCB_BASE_FRAME::Settings(), TOOL_MENU::ShowContextMenu(), KIGFX::VIEW_CONTROLS::ShowCursor(), INTERACTIVE_PLACER_BASE::SnapItem(), TC_COMMAND, PCB_ACTIONS::trackViaSizeChanged, KIGFX::PCB_VIEW::Update(), PCB_ACTIONS::viaSizeDec, PCB_ACTIONS::viaSizeInc, PCB_TOOL_BASE::view(), and TOOL_INTERACTIVE::Wait().

Referenced by MICROWAVE_TOOL::addMicrowaveFootprint(), DRAWING_TOOL::DrawVia(), and PAD_TOOL::PlacePad().

◆ EditingModules()

bool PCB_TOOL_BASE::EditingModules ( ) const
inlineinherited

◆ frame()

PCB_BASE_EDIT_FRAME* PCB_TOOL_BASE::frame ( ) const
inlineprotectedinherited

Definition at line 161 of file pcb_tool_base.h.

162  {
163  return getEditFrame<PCB_BASE_EDIT_FRAME>();
164  }

Referenced by POINT_EDITOR::addCorner(), AUTOPLACE_TOOL::autoplace(), PCB_TOOL_BASE::canvas(), ZONE_FILLER_TOOL::CheckAllZones(), PNS::TOOL_BASE::checkSnap(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), ROUTER_TOOL::CustomTrackWidthDialog(), FOOTPRINT_EDITOR_TOOLS::DeleteFootprint(), PCB_TOOL_BASE::displayOptions(), PCB_TOOL_BASE::doInteractiveItemPlacement(), ROUTER_TOOL::DpDimensionsDialog(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), PCB_EDITOR_CONTROL::ExportSpecctraDSN(), ZONE_FILLER_TOOL::FillAllZones(), EDIT_TOOL::FilletTracks(), ROUTER_TOOL::finishInteractive(), EDIT_TOOL::Flip(), PCB_EDITOR_CONTROL::FlipPcbView(), GLOBAL_EDIT_TOOL::GlobalDeletions(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PCB_EDITOR_CONTROL::ImportSpecctraSession(), ROUTER_TOOL::Init(), SELECTION_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCBNEW_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::meanderSettingsDialog(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), GROUP_TOOL::PickNewMember(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), PAD_TOOL::pushPadSettings(), PAD_TOOL::recombinePad(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), PNS::TOOL_BASE::Reset(), ROUTER_TOOL::SelectCopperLayerPair(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), POINT_EDITOR::setEditedPoint(), ROUTER_TOOL::SettingsDialog(), GLOBAL_EDIT_TOOL::swapBoardItem(), GLOBAL_EDIT_TOOL::SwapLayers(), ROUTER_TOOL::switchLayerOnViaPlacement(), PCB_EDITOR_CONTROL::UpdateSchematicFromPCB(), ZONE_FILLER_TOOL::ZoneFill(), and ZONE_FILLER_TOOL::ZoneFillAll().

◆ GetDRCEngine()

std::shared_ptr<DRC_ENGINE> DRC_TOOL::GetDRCEngine ( )
inline

Definition at line 113 of file drc_tool.h.

113 { return m_drcEngine; }
std::shared_ptr< DRC_ENGINE > m_drcEngine
Definition: drc_tool.h:60

References m_drcEngine.

Referenced by DIALOG_DRC::OnRunDRCClick().

◆ getEditFrame()

template<typename T >
T* TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Function getEditFrame()

Returns the application window object, casted to requested user type.

Definition at line 187 of file tool_base.h.

188  {
189 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
190  wxASSERT( dynamic_cast<T*>( getToolHolderInt() ) );
191 #endif
192  return static_cast<T*>( getToolHolderInt() );
193  }
TOOLS_HOLDER * getToolHolderInt() const
Definition: tool_base.cpp:48

References TOOL_BASE::getToolHolderInt().

Referenced by ZONE_CREATE_HELPER::createNewZone().

◆ GetId()

TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Function GetId() Returns the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 121 of file tool_base.h.

122  {
123  return m_toolId;
124  }
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

◆ GetManager()

TOOL_MANAGER* TOOL_BASE::GetManager ( ) const
inlineinherited

Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.

Returns
Instance of the TOOL_MANAGER. If there is no TOOL_MANAGER associated, it returns NULL.

Definition at line 143 of file tool_base.h.

144  {
145  return m_toolMgr;
146  }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by BOARD_COMMIT::BOARD_COMMIT(), ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), PCB_TOOL_BASE::doInteractiveItemPlacement(), ACTION_MENU::getToolManager(), LIB_TREE::onContextMenu(), ZONE_CREATE_HELPER::OnFirstPoint(), ACTION_MENU::OnMenuEvent(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ getModel()

template<typename T >
T* TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Function getModel()

Returns the model object if it matches the requested type.

Definition at line 201 of file tool_base.h.

202  {
203  EDA_ITEM* m = getModelInt();
204 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
205  wxASSERT( dynamic_cast<T*>( m ) );
206 #endif
207  return static_cast<T*>( m );
208  }
EDA_ITEM * getModelInt() const
Definition: tool_base.cpp:54
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: eda_item.h:148

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createZoneFromExisting(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ GetName()

const std::string& TOOL_BASE::GetName ( void  ) const
inlineinherited

Function GetName() Returns the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 132 of file tool_base.h.

133  {
134  return m_toolName;
135  }
std::string m_toolName
Name of the tool.
Definition: tool_base.h:218

References TOOL_BASE::m_toolName.

Referenced by TOOL_MANAGER::dispatchInternal(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), and TOOL_MANAGER::RegisterTool().

◆ GetToolMenu()

◆ GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Function GetType() Returns the type of the tool.

Returns
The type of the tool.

Definition at line 110 of file tool_base.h.

111  {
112  return m_type;
113  }
TOOL_TYPE m_type
Stores the type of the tool.
Definition: tool_base.h:211

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

◆ getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Function getView()

Returns the instance of VIEW object used in the application. It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 36 of file tool_base.cpp.

37 {
38  return m_toolMgr->GetView();
39 }
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:290
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), SCH_EDIT_TOOL::ChangeTextType(), EE_INSPECTION_TOOL::checkPart(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::collectHits(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_EDIT_TOOL::DoDelete(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomFit(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), MICROWAVE_TOOL::drawMicrowaveInductor(), PL_DRAWING_TOOLS::DrawShape(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_EDITOR_CONTROL::FindComponentAndItem(), EE_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCBNEW_CONTROL::GridResetOrigin(), PCBNEW_CONTROL::GridSetOrigin(), SELECTION_TOOL::GuessSelectionCandidates(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), PNS::TOOL_BASE::highlightNet(), PCB_INSPECTION_TOOL::highlightNet(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_MOVE_TOOL::moveItem(), PL_EDIT_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PNS::TOOL_BASE::pickSingleItem(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::Reset(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), DRAWING_TOOL::Reset(), EE_SELECTION_TOOL::Reset(), SELECTION_TOOL::Reset(), EE_TOOL_BASE< SCH_BASE_FRAME >::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), GERBVIEW_SELECTION_TOOL::selectable(), SELECTION_TOOL::Selectable(), SELECTION_TOOL::SelectAll(), EE_SELECTION_TOOL::SelectAll(), PL_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectionContains(), SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::SelectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), SCH_EDITOR_CONTROL::UpdateFind(), EE_POINT_EDITOR::updateItem(), PL_POINT_EDITOR::updateItem(), POINT_EDITOR::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_VIEWER_TOOLS::view(), PCB_TOOL_BASE::view(), SELECTION_TOOL::zoomFitSelection(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and SELECTION_TOOL::~SELECTION_TOOL().

◆ getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Function getViewControls()

Returns the instance of VIEW_CONTROLS object used in the application. It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.)

Returns
The instance of VIEW_CONTROLS.

Definition at line 42 of file tool_base.cpp.

43 {
44  return m_toolMgr->GetViewControls();
45 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:292

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), SCH_EDITOR_CONTROL::AssignNetclass(), SCH_EDIT_TOOL::BreakWire(), PCB_TOOL_BASE::controls(), EDIT_TOOL::copyToClipboard(), COMMON_TOOLS::CursorControl(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), PL_POINT_EDITOR::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), LENGTH_TUNER_TOOL::performTuning(), LIB_DRAWING_TOOLS::PlaceAnchor(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), POINT_EDITOR::Reset(), DRAWING_TOOL::Reset(), COMMON_TOOLS::ResetLocalCoords(), GERBVIEW_SELECTION_TOOL::selectCursor(), SELECTION_TOOL::selectCursor(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCBNEW_PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateItem(), LIB_MOVE_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

◆ Go()

template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited

Function Go()

Defines which state (aStateFunc) to go when a certain event arrives (aConditions). No conditions means any event.

Definition at line 129 of file tool_interactive.h.

131 {
132  TOOL_STATE_FUNC sptr = std::bind( aStateFunc, static_cast<T*>( this ), std::placeholders::_1 );
133 
134  goInternal( sptr, aConditions );
135 }
std::function< int(const TOOL_EVENT &)> TOOL_STATE_FUNC
Definition: tool_base.h:58
void goInternal(TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)

References TOOL_INTERACTIVE::goInternal().

Referenced by ZOOM_TOOL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), LENGTH_TUNER_TOOL::setTransitions(), PCB_REANNOTATE_TOOL::setTransitions(), GERBVIEW_INSPECTION_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), LIB_PIN_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), SCH_NAVIGATE_TOOL::setTransitions(), PL_DRAWING_TOOLS::setTransitions(), EE_POINT_EDITOR::setTransitions(), PL_POINT_EDITOR::setTransitions(), COMMON_CONTROL::setTransitions(), ZONE_FILLER_TOOL::setTransitions(), LIB_MOVE_TOOL::setTransitions(), KICAD_MANAGER_CONTROL::setTransitions(), CONVERT_TOOL::setTransitions(), setTransitions(), PCB_VIEWER_TOOLS::setTransitions(), POINT_EDITOR::setTransitions(), LIB_DRAWING_TOOLS::setTransitions(), MICROWAVE_TOOL::setTransitions(), GLOBAL_EDIT_TOOL::setTransitions(), GERBVIEW_CONTROL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), PAD_TOOL::setTransitions(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::setTransitions(), SCH_MOVE_TOOL::setTransitions(), GROUP_TOOL::setTransitions(), LIB_CONTROL::setTransitions(), PL_EDITOR_CONTROL::setTransitions(), LIB_EDIT_TOOL::setTransitions(), PL_EDIT_TOOL::setTransitions(), FOOTPRINT_EDITOR_TOOLS::setTransitions(), SCH_EDIT_TOOL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), PCBNEW_CONTROL::setTransitions(), EDA_3D_CONTROLLER::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), COMMON_TOOLS::setTransitions(), CVPCB_CONTROL::setTransitions(), CVPCB_ASSOCIATION_TOOL::setTransitions(), SCH_LINE_WIRE_BUS_TOOL::setTransitions(), PCBNEW_PICKER_TOOL::setTransitions(), PICKER_TOOL::setTransitions(), PCB_INSPECTION_TOOL::setTransitions(), PCB_EDITOR_CONTROL::setTransitions(), DRAWING_TOOL::setTransitions(), EDIT_TOOL::setTransitions(), SELECTION_TOOL::setTransitions(), PL_SELECTION_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), and EE_SELECTION_TOOL::setTransitions().

◆ Init()

bool PCB_TOOL_BASE::Init ( void  )
overridevirtualinherited

Function Init() Init() is called once upon a registration of the tool.

Returns
True if the initialization went fine, false - otherwise.

Reimplemented from TOOL_BASE.

Reimplemented in EDIT_TOOL, SELECTION_TOOL, PCB_INSPECTION_TOOL, DRAWING_TOOL, POSITION_RELATIVE_TOOL, PCB_EDITOR_CONTROL, POINT_EDITOR, FOOTPRINT_EDITOR_TOOLS, GLOBAL_EDIT_TOOL, PAD_TOOL, GROUP_TOOL, PCB_REANNOTATE_TOOL, LENGTH_TUNER_TOOL, and ROUTER_TOOL.

Definition at line 252 of file pcb_tool_base.cpp.

253 {
254  // A basic context manu. Many (but not all) tools will choose to override this.
255 
256  auto& ctxMenu = m_menu.GetMenu();
257 
258  // cancel current tool goes in main context menu at the top if present
260  ctxMenu.AddSeparator( 1 );
261 
262  // Finally, add the standard zoom/grid items
263  getEditFrame<PCB_BASE_FRAME>()->AddStandardSubMenus( m_menu );
264 
265  return true;
266 }
static bool ShowAlways(const SELECTION &aSelection)
The default condition function (always returns true).
TOOL_MENU m_menu
functions below are not yet implemented - their interface may change
CONDITIONAL_MENU & GetMenu()
Function GetMenu.
Definition: tool_menu.cpp:46
static TOOL_ACTION cancelInteractive
Definition: actions.h:65
void AddItem(const TOOL_ACTION &aAction, const SELECTION_CONDITION &aCondition, int aOrder=ANY_ORDER)
Adds a menu entry to run a TOOL_ACTION on selected items.

References CONDITIONAL_MENU::AddItem(), ACTIONS::cancelInteractive, TOOL_MENU::GetMenu(), TOOL_INTERACTIVE::m_menu, and SELECTION_CONDITIONS::ShowAlways().

◆ IsDRCDialogShown()

bool DRC_TOOL::IsDRCDialogShown ( )

Check to see if the DRC_TOOL dialog is currently shown.

Returns
true if the dialog is shown

Definition at line 123 of file drc_tool.cpp.

124 {
125  if( m_drcDialog )
126  return m_drcDialog->IsShown();
127 
128  return false;
129 }
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57

References m_drcDialog.

◆ IsDRCRunning()

bool DRC_TOOL::IsDRCRunning ( ) const
inline

Check to see if the DRC engine is running the tests.

Returns
true if the DRC engine is running the tests

Definition at line 106 of file drc_tool.h.

106 { return m_drcRunning; }
bool m_drcRunning
Definition: drc_tool.h:58

References m_drcRunning.

Referenced by PCB_EDIT_FRAME::setupUIConditions().

◆ IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 31 of file tool_base.cpp.

32 {
33  return m_toolMgr->IsToolActive( m_toolId );
34 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool IsToolActive(TOOL_ID aId) const
Function IsToolActive() Returns true if a tool with given id is active (executing)

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by EDIT_TOOL::isRouterActive(), and ROUTER_TOOL::onViaCommand().

◆ module()

◆ Reset()

void DRC_TOOL::Reset ( RESET_REASON  aReason)
overridevirtual

Function Reset() Brings the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Reimplemented from PCB_TOOL_BASE.

Definition at line 53 of file drc_tool.cpp.

54 {
55  m_editFrame = getEditFrame<PCB_EDIT_FRAME>();
56 
57  if( m_pcb != m_editFrame->GetBoard() )
58  {
59  if( m_drcDialog )
61 
64  }
65 
66  if( aReason == MODEL_RELOAD && m_pcb->GetProject() )
67  {
68  try
69  {
70  m_drcEngine->InitEngine( m_editFrame->GetDesignRulesPath() );
71  }
72  catch( PARSE_ERROR& pe )
73  {
74  // Not sure this is the best place to tell the user their rules are buggy, so
75  // we'll stay quiet for now. Feel free to revisit this decision....
76  }
77  }
78 }
wxString GetDesignRulesPath()
Returns the absolute path to the design rules file for the currently-loaded board.
Model changes (required full reload)
Definition: tool_base.h:82
PCB_EDIT_FRAME * m_editFrame
Definition: drc_tool.h:55
BOARD * m_pcb
Definition: drc_tool.h:56
PROJECT * GetProject() const
Definition: class_board.h:397
std::shared_ptr< DRC_ENGINE > m_drcEngine
Definition: drc_tool.h:60
BOARD_DESIGN_SETTINGS & GetDesignSettings() const
Definition: class_board.h:558
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57
Struct PARSE_ERROR contains a filename or source description, a problem input line,...
Definition: ki_exception.h:123
BOARD * GetBoard() const
void DestroyDRCDialog()
Closes and frees the DRC dialog.
Definition: drc_tool.cpp:132
std::shared_ptr< DRC_ENGINE > m_DRCEngine

References DestroyDRCDialog(), PCB_BASE_FRAME::GetBoard(), PCB_BASE_EDIT_FRAME::GetDesignRulesPath(), BOARD::GetDesignSettings(), BOARD::GetProject(), m_drcDialog, m_drcEngine, BOARD_DESIGN_SETTINGS::m_DRCEngine, m_editFrame, m_pcb, and TOOL_BASE::MODEL_RELOAD.

Referenced by PCB_EDIT_FRAME::onBoardLoaded().

◆ RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Function RunMainStack()

Calls a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 87 of file tool_interactive.cpp.

88 {
89  m_toolMgr->RunMainStack( this, std::move( aFunc ) );
90 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

◆ RunTests()

void DRC_TOOL::RunTests ( PROGRESS_REPORTER aProgressReporter,
bool  aTestTracksAgainstZones,
bool  aRefillZones,
bool  aReportAllTrackErrors,
bool  aTestFootprints 
)

Run the DRC tests.

Definition at line 142 of file drc_tool.cpp.

144 {
145  // One at a time, please.
146  // Note that the main GUI entry points to get here are blocked, so this is really an
147  // insurance policy and as such we make no attempts to queue up the DRC run or anything.
148  if( m_drcRunning )
149  return;
150 
152  BOARD_COMMIT commit( m_editFrame );
153  NETLIST netlist;
154  bool netlistFetched = false;
155  wxWindowDisabler disabler( /* disable everything except: */ m_drcDialog );
156 
157  m_drcRunning = true;
158 
159  if( aRefillZones )
160  {
161  aProgressReporter->AdvancePhase( _( "Refilling all zones..." ) );
162 
163  zoneFiller->FillAllZones( m_drcDialog, aProgressReporter );
164  }
165  else
166  {
167  aProgressReporter->AdvancePhase( _( "Checking zone fills..." ) );
168 
169  zoneFiller->CheckAllZones( m_drcDialog, aProgressReporter );
170  }
171 
172  m_drcEngine->SetWorksheet( m_editFrame->GetCanvas()->GetWorksheet() );
173 
174  if( aTestFootprints && !Kiface().IsSingle() )
175  {
177  netlistFetched = true;
178 
179  if( m_drcDialog )
180  m_drcDialog->Raise();
181 
182  m_drcEngine->SetSchematicNetlist( &netlist );
183  }
184 
185  m_drcEngine->SetProgressReporter( aProgressReporter );
186 
187  m_drcEngine->SetViolationHandler(
188  [&]( const std::shared_ptr<DRC_ITEM>& aItem, wxPoint aPos )
189  {
190  if( aItem->GetErrorCode() == DRCE_MISSING_FOOTPRINT
191  || aItem->GetErrorCode() == DRCE_DUPLICATE_FOOTPRINT
192  || aItem->GetErrorCode() == DRCE_EXTRA_FOOTPRINT
193  || aItem->GetErrorCode() == DRCE_NET_CONFLICT )
194  {
195  m_footprints.push_back( aItem );
196  }
197  else if( aItem->GetErrorCode() == DRCE_UNCONNECTED_ITEMS )
198  {
199  m_unconnected.push_back( aItem );
200  }
201  else
202  {
203  MARKER_PCB* marker = new MARKER_PCB( aItem, aPos );
204  commit.Add( marker );
205  }
206  } );
207 
208  m_drcEngine->RunTests( m_editFrame->GetUserUnits(), aTestTracksAgainstZones,
209  aReportAllTrackErrors, aTestFootprints );
210 
211  m_drcEngine->SetProgressReporter( nullptr );
212  m_drcEngine->ClearViolationHandler();
213 
214  if( m_drcDialog )
215  {
217 
218  if( aTestFootprints && netlistFetched )
220  }
221 
222  commit.Push( _( "DRC" ), false );
223 
224  m_drcRunning = false;
225 
226  // update the m_drcDialog listboxes
227  updatePointers();
228 }
virtual void AdvancePhase()
Uses the next vailable virtual zone of the dialog progress bar.
PCB_DRAW_PANEL_GAL * GetCanvas() const override
Return a pointer to GAL-based canvas of given EDA draw frame.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
PCB_EDIT_FRAME * m_editFrame
Definition: drc_tool.h:55
std::shared_ptr< DRC_ENGINE > m_drcEngine
Definition: drc_tool.h:60
bool m_drcRunning
Definition: drc_tool.h:58
void SetDrcRun()
Definition: dialog_drc.h:51
void SetFootprintTestsRun()
Definition: dialog_drc.h:52
void FillAllZones(wxWindow *aCaller, PROGRESS_REPORTER *aReporter=nullptr)
ZONE_FILLER_TOOL.
void CheckAllZones(wxWindow *aCaller, PROGRESS_REPORTER *aReporter=nullptr)
NETLIST stores all of information read from a netlist along with the flags used to update the NETLIST...
Definition: pcb_netlist.h:194
bool IsSingle() const
Function IsSingle is this KIFACE_I running under single_top?
Definition: kiface_i.h:117
KIFACE_I & Kiface()
Global KIFACE_I "get" accessor.
void updatePointers()
Update needed pointers from the one pointer which is known not to change.
Definition: drc_tool.cpp:231
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57
KIGFX::WS_PROXY_VIEW_ITEM * GetWorksheet() const
std::vector< std::shared_ptr< DRC_ITEM > > m_footprints
Definition: drc_tool.h:63
#define _(s)
Definition: 3d_actions.cpp:33
std::vector< std::shared_ptr< DRC_ITEM > > m_unconnected
Definition: drc_tool.h:62
bool FetchNetlistFromSchematic(NETLIST &aNetlist, FETCH_NETLIST_MODE aMode)
EDA_UNITS GetUserUnits() const
Return the user units currently in use.

References _, PROGRESS_REPORTER::AdvancePhase(), PCB_EDIT_FRAME::ANNOTATION_DIALOG, ZONE_FILLER_TOOL::CheckAllZones(), DRCE_DUPLICATE_FOOTPRINT, DRCE_EXTRA_FOOTPRINT, DRCE_MISSING_FOOTPRINT, DRCE_NET_CONFLICT, DRCE_UNCONNECTED_ITEMS, PCB_EDIT_FRAME::FetchNetlistFromSchematic(), ZONE_FILLER_TOOL::FillAllZones(), PCB_BASE_FRAME::GetCanvas(), TOOL_MANAGER::GetTool(), EDA_BASE_FRAME::GetUserUnits(), PCB_DRAW_PANEL_GAL::GetWorksheet(), KIFACE_I::IsSingle(), Kiface(), m_drcDialog, m_drcEngine, m_drcRunning, m_editFrame, m_footprints, TOOL_BASE::m_toolMgr, m_unconnected, DIALOG_DRC::SetDrcRun(), DIALOG_DRC::SetFootprintTestsRun(), and updatePointers().

Referenced by DIALOG_DRC::OnRunDRCClick().

◆ selection() [1/2]

const PCBNEW_SELECTION & PCB_TOOL_BASE::selection ( ) const
protectedinherited

Definition at line 290 of file pcb_tool_base.cpp.

291 {
292  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
293  const auto& selection = selTool->GetSelection();
294  return selection;
295 }
SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
const PCBNEW_SELECTION & selection() const

References TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplaceSelected(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), EDIT_TOOL::ChangeTrackWidth(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), EDIT_TOOL::CreateArray(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), PCB_INSPECTION_TOOL::doHideNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawZone(), EDIT_TOOL::Duplicate(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), GROUP_TOOL::EnterGroup(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), EDIT_TOOL::FilletTracks(), SELECTION_TOOL::filterSelection(), EDIT_TOOL::Flip(), DRAWING_TOOL::getSourceZoneForAction(), GROUP_TOOL::Group(), PCB_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::InspectClearance(), PCB_INSPECTION_TOOL::InspectConstraints(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), PCBNEW_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceImportedGraphics(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::PositionRelative(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), GROUP_TOOL::RemoveFromGroup(), GLOBAL_EDIT_TOOL::RemoveUnusedPads(), EDIT_TOOL::Rotate(), PCB_TOOL_BASE::selection(), SELECTION_TOOL::selectNet(), DRAWING_TOOL::SetAnchor(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), GROUP_TOOL::Ungroup(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), PCB_EDITOR_CONTROL::ZoneDuplicate(), ZONE_FILLER_TOOL::ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfill().

◆ selection() [2/2]

PCBNEW_SELECTION & PCB_TOOL_BASE::selection ( )
protectedinherited

Definition at line 298 of file pcb_tool_base.cpp.

299 {
300  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
301  auto& selection = selTool->GetSelection();
302  return selection;
303 }
SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
const PCBNEW_SELECTION & selection() const

References TOOL_MANAGER::GetTool(), TOOL_BASE::m_toolMgr, and PCB_TOOL_BASE::selection().

◆ SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Function SetContextMenu()

Assigns a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 76 of file tool_interactive.cpp.

77 {
78  if( aMenu )
79  aMenu->SetTool( this );
80  else
81  aTrigger = CMENU_OFF;
82 
83  m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
84 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void SetTool(TOOL_INTERACTIVE *aTool)
Sets a tool that is the creator of the menu.
void ScheduleContextMenu(TOOL_BASE *aTool, ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Sets behaviour of the tool's context popup menu.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), TOOL_MENU::ShowContextMenu(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ SetEditModules()

void PCB_TOOL_BASE::SetEditModules ( bool  aEnabled)
inlineinherited

Function SetEditModules()

Toggles edit module mode. When enabled, one may select parts of footprints individually (graphics, pads, etc.), so they can be modified.

Parameters
aEnableddecides if the mode should be enabled.

Definition at line 101 of file pcb_tool_base.h.

102  {
103  m_editModules = aEnabled;
104  }

References PCB_TOOL_BASE::m_editModules.

◆ setTransitions()

void DRC_TOOL::setTransitions ( )
overrideprivatevirtual

Sets up handlers for various events.

Reimplemented from PCB_TOOL_BASE.

Definition at line 249 of file drc_tool.cpp.

250 {
252 }
void ShowDRCDialog(wxWindow *aParent)
Open a dialog and prompts the user, then if a test run button is clicked, runs the test(s) and create...
Definition: drc_tool.cpp:81
void Go(int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
Function Go()
static TOOL_ACTION runDRC
Definition: pcb_actions.h:338

References TOOL_INTERACTIVE::Go(), PCB_ACTIONS::runDRC, and ShowDRCDialog().

◆ ShowDRCDialog() [1/2]

void DRC_TOOL::ShowDRCDialog ( wxWindow *  aParent)

Open a dialog and prompts the user, then if a test run button is clicked, runs the test(s) and creates the MARKERS.

The dialog is only created if it is not already in existence.

Parameters
aParentis the parent window for wxWidgets. Usually the PCB editor frame but can be another dialog if aParent == NULL (default), the parent will be the PCB editor frame and the dialog will be not modal (just float on parent if aParent is specified, the dialog will be modal. The modal mode is mandatory if the dialog is created from another dialog, not from the PCB editor frame

Definition at line 81 of file drc_tool.cpp.

82 {
83  bool show_dlg_modal = true;
84 
85  // the dialog needs a parent frame. if it is not specified, this is the PCB editor frame
86  // specified in DRC_TOOL class.
87  if( !aParent )
88  {
89  // if any parent is specified, the dialog is modal.
90  // if this is the default PCB editor frame, it is not modal
91  show_dlg_modal = false;
92  aParent = m_editFrame;
93  }
94 
95  Activate();
97 
98  if( !m_drcDialog )
99  {
100  m_drcDialog = new DIALOG_DRC( m_editFrame, aParent );
101  updatePointers();
102 
103  if( show_dlg_modal )
104  m_drcDialog->ShowModal();
105  else
106  m_drcDialog->Show( true );
107  }
108  else // The dialog is just not visible (because the user has double clicked on an error item)
109  {
110  updatePointers();
111  m_drcDialog->Show( true );
112  }
113 }
static TOOL_ACTION selectionClear
Clears the current selection.
Definition: pcb_actions.h:62
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
PCB_EDIT_FRAME * m_editFrame
Definition: drc_tool.h:55
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Function RunAction() Runs the specified action.
Definition: tool_manager.h:141
void updatePointers()
Update needed pointers from the one pointer which is known not to change.
Definition: drc_tool.cpp:231
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57
bool Show(bool show) override
void Activate()
Function Activate() Runs the tool.

References TOOL_INTERACTIVE::Activate(), m_drcDialog, m_editFrame, TOOL_BASE::m_toolMgr, TOOL_MANAGER::RunAction(), PCB_ACTIONS::selectionClear, DIALOG_SHIM::Show(), and updatePointers().

Referenced by DIALOG_PLOT::onRunDRC(), setTransitions(), and ShowDRCDialog().

◆ ShowDRCDialog() [2/2]

int DRC_TOOL::ShowDRCDialog ( const TOOL_EVENT aEvent)

Definition at line 116 of file drc_tool.cpp.

117 {
118  ShowDRCDialog( nullptr );
119  return 0;
120 }
void ShowDRCDialog(wxWindow *aParent)
Open a dialog and prompts the user, then if a test run button is clicked, runs the test(s) and create...
Definition: drc_tool.cpp:81

References ShowDRCDialog().

◆ updatePointers()

void DRC_TOOL::updatePointers ( )
private

Update needed pointers from the one pointer which is known not to change.

Definition at line 231 of file drc_tool.cpp.

232 {
233  // update my pointers, m_editFrame is the only unchangeable one
235 
237 
238  if( m_drcDialog ) // Use diag list boxes only in DRC_TOOL dialog
239  {
242  &m_unconnected ) );
244  &m_footprints ) );
245  }
246 }
RATSNEST_DRC_ITEMS_PROVIDER.
void ResolveDRCExclusions()
Update markers to match recorded exclusions.
PCB_EDIT_FRAME * m_editFrame
Definition: drc_tool.h:55
BOARD * m_pcb
Definition: drc_tool.h:56
BOARD_DRC_ITEMS_PROVIDER is an implementation of the RC_ITEMS_PROVIDER interface which uses a BOARD i...
void SetFootprintsProvider(RC_ITEMS_PROVIDER *aProvider)
Definition: dialog_drc.cpp:295
DIALOG_DRC * m_drcDialog
Definition: drc_tool.h:57
void SetMarkersProvider(RC_ITEMS_PROVIDER *aProvider)
Definition: dialog_drc.cpp:279
std::vector< std::shared_ptr< DRC_ITEM > > m_footprints
Definition: drc_tool.h:63
BOARD * GetBoard() const
std::vector< std::shared_ptr< DRC_ITEM > > m_unconnected
Definition: drc_tool.h:62
VECTOR_DRC_ITEMS_PROVIDER is an implementation of the interface named DRC_ITEMS_PROVIDER which uses a...
void SetUnconnectedProvider(RC_ITEMS_PROVIDER *aProvider)
Definition: dialog_drc.cpp:287

References PCB_BASE_FRAME::GetBoard(), m_drcDialog, m_editFrame, m_footprints, m_pcb, m_unconnected, PCB_EDIT_FRAME::ResolveDRCExclusions(), DIALOG_DRC::SetFootprintsProvider(), DIALOG_DRC::SetMarkersProvider(), and DIALOG_DRC::SetUnconnectedProvider().

Referenced by RunTests(), and ShowDRCDialog().

◆ userUnits()

EDA_UNITS DRC_TOOL::userUnits ( ) const
inlineprivate

Definition at line 74 of file drc_tool.h.

74 { return m_editFrame->GetUserUnits(); }
PCB_EDIT_FRAME * m_editFrame
Definition: drc_tool.h:55
EDA_UNITS GetUserUnits() const
Return the user units currently in use.

References EDA_BASE_FRAME::GetUserUnits(), and m_editFrame.

◆ view()

◆ Wait()

TOOL_EVENT * TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Function Wait()

Suspends execution of the tool until an event specified in aEventList arrives. No parameters means waiting for any event.

Definition at line 57 of file tool_interactive.cpp.

58 {
59  return m_toolMgr->ScheduleWait( this, aEventList );
60 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_EVENT * ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pauses execution of a given tool until one or more events matching aConditions arrives.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), ROUTER_TOOL::InlineDrag(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

Member Data Documentation

◆ m_drcDialog

DIALOG_DRC* DRC_TOOL::m_drcDialog
private

◆ m_drcEngine

std::shared_ptr<DRC_ENGINE> DRC_TOOL::m_drcEngine
private

Definition at line 60 of file drc_tool.h.

Referenced by GetDRCEngine(), Reset(), and RunTests().

◆ m_drcRunning

bool DRC_TOOL::m_drcRunning
private

Definition at line 58 of file drc_tool.h.

Referenced by IsDRCRunning(), and RunTests().

◆ m_editFrame

PCB_EDIT_FRAME* DRC_TOOL::m_editFrame
private

Definition at line 55 of file drc_tool.h.

Referenced by Reset(), RunTests(), ShowDRCDialog(), updatePointers(), and userUnits().

◆ m_editModules

◆ m_footprints

std::vector<std::shared_ptr<DRC_ITEM> > DRC_TOOL::m_footprints
private

Definition at line 63 of file drc_tool.h.

Referenced by RunTests(), and updatePointers().

◆ m_menu

TOOL_MENU TOOL_INTERACTIVE::m_menu
protectedinherited

functions below are not yet implemented - their interface may change

Definition at line 108 of file tool_interactive.h.

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), TOOL_INTERACTIVE::GetToolMenu(), ROUTER_TOOL::Init(), LENGTH_TUNER_TOOL::Init(), PICKER_TOOL::Init(), PL_EDIT_TOOL::Init(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Init(), SCH_EDIT_TOOL::Init(), LIB_CONTROL::Init(), LIB_DRAWING_TOOLS::Init(), FOOTPRINT_EDITOR_TOOLS::Init(), PCB_VIEWER_TOOLS::Init(), PL_DRAWING_TOOLS::Init(), PCB_EDITOR_CONTROL::Init(), SCH_DRAWING_TOOLS::Init(), EDA_3D_CONTROLLER::Init(), GERBVIEW_SELECTION_TOOL::Init(), PL_SELECTION_TOOL::Init(), DRAWING_TOOL::Init(), EE_SELECTION_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), SELECTION_TOOL::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), PCB_TOOL_BASE::Init(), PL_EDIT_TOOL::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ m_pcb

BOARD* DRC_TOOL::m_pcb
private

Definition at line 56 of file drc_tool.h.

Referenced by Reset(), and updatePointers().

◆ m_toolId

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 214 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

◆ m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 219 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), PL_SELECTION_TOOL::AddItemsToSel(), EE_SELECTION_TOOL::AddItemsToSel(), PL_SELECTION_TOOL::AddItemToSel(), EE_SELECTION_TOOL::AddItemToSel(), SELECTION_TOOL::AddItemToSel(), SCH_MOVE_TOOL::AlignElements(), SCH_EDITOR_CONTROL::AssignNetclass(), CVPCB_ASSOCIATION_TOOL::Associate(), TOOL_BASE::attachManager(), SCH_EDIT_TOOL::AutoplaceFields(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), GERBVIEW_CONTROL::ClearAllLayers(), PCB_INSPECTION_TOOL::ClearHighlight(), SCH_EDITOR_CONTROL::ClearHighlight(), SELECTION_TOOL::ClearSelection(), PL_SELECTION_TOOL::ClearSelection(), GERBVIEW_SELECTION_TOOL::clearSelection(), EE_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TOOL::ConvertDeMorgan(), LIB_EDIT_TOOL::Copy(), PL_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), MICROWAVE_TOOL::createInductorBetween(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), COMMON_TOOLS::CursorControl(), SCH_EDITOR_CONTROL::Cut(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), LIB_EDIT_TOOL::DoDelete(), SCH_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_INSPECTION_TOOL::doHideNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawRectangle(), DRAWING_TOOL::drawSegment(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), LIB_EDIT_TOOL::editGraphicProperties(), PAD_TOOL::EditPad(), LIB_EDIT_TOOL::editSymbolProperties(), SCH_EDITOR_CONTROL::EditWithLibEdit(), GROUP_TOOL::EnterGroup(), SCH_NAVIGATE_TOOL::EnterSheet(), SCH_EDITOR_CONTROL::EnterSheet(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandConnection(), PAD_TOOL::explodePad(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::findCallback(), SCH_EDITOR_CONTROL::FindComponentAndItem(), POINT_EDITOR::finishItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getToolHolderInt(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), PCBNEW_CONTROL::GridSetOrigin(), GROUP_TOOL::Group(), EE_SELECTION_TOOL::GuessSelectionCandidates(), GERBVIEW_CONTROL::HighlightControl(), PCB_INSPECTION_TOOL::HighlightItem(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::ImportWorksheetContent(), LIB_EDIT_TOOL::Init(), PL_EDIT_TOOL::Init(), SCH_EDIT_TOOL::Init(), GROUP_TOOL::Init(), CONVERT_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), LIB_CONTROL::Init(), PAD_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_POINT_EDITOR::Init(), PCB_EDITOR_CONTROL::Init(), POINT_EDITOR::Init(), POSITION_RELATIVE_TOOL::Init(), PCB_INSPECTION_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::InspectClearance(), PCB_INSPECTION_TOOL::InspectConstraints(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isInteractiveDragEnabled(), EDIT_TOOL::isRouterActive(), TOOL_BASE::IsToolActive(), GROUP_TOOL::LeaveGroup(), SCH_NAVIGATE_TOOL::LeaveSheet(), SCH_EDITOR_CONTROL::LeaveSheet(), COMMON_CONTROL::ListHotKeys(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), LIB_CONTROL::OnDeMorgan(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), LIB_EDIT_TOOL::PinTable(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), PCBNEW_CONTROL::Print(), GERBVIEW_CONTROL::Print(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EE_SELECTION_TOOL::RebuildSelection(), LIB_EDIT_TOOL::Redo(), SCH_EDITOR_CONTROL::Redo(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), GERBVIEW_CONTROL::ReloadAllLayers(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), GROUP_TOOL::RemoveFromGroup(), PL_SELECTION_TOOL::RemoveItemFromSel(), EE_SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemFromSel(), PL_SELECTION_TOOL::RemoveItemsFromSel(), EE_SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_DRAWING_TOOLS::RepeatDrawItem(), EE_SELECTION_TOOL::RequestSelection(), SELECTION_TOOL::RequestSelection(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), TOOL_INTERACTIVE::RunMainStack(), RunTests(), EE_SELECTION_TOOL::SelectConnection(), PCB_TOOL_BASE::selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), SELECTION_TOOL::SelectItems(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectNet(), PL_SELECTION_TOOL::SelectPoint(), GERBVIEW_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), SELECTION_TOOL::selectSameSheet(), SELECTION_TOOL::selectSheetContents(), DRAWING_TOOL::SetAnchor(), TOOL_INTERACTIVE::SetContextMenu(), EDA_3D_CONTROLLER::SetMaterial(), ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), EDA_3D_CONTROLLER::ToggleVisibility(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), LIB_EDIT_TOOL::Undo(), SCH_EDITOR_CONTROL::Undo(), GROUP_TOOL::Ungroup(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SELECTION_TOOL::UnselectItems(), PNS::TOOL_BASE::updateEndItem(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PNS::TOOL_BASE::updateStartItem(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), PCB_EDITOR_CONTROL::ZoneDuplicate(), and PCB_EDITOR_CONTROL::ZoneMerge().

◆ m_toolName

std::string TOOL_BASE::m_toolName
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 218 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

◆ m_type

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Stores the type of the tool.

Definition at line 211 of file tool_base.h.

Referenced by TOOL_BASE::GetType(), and BOARD_COMMIT::Push().

◆ m_unconnected

std::vector<std::shared_ptr<DRC_ITEM> > DRC_TOOL::m_unconnected
private

Definition at line 62 of file drc_tool.h.

Referenced by RunTests(), and updatePointers().


The documentation for this class was generated from the following files: