KiCad PCB EDA Suite
DIALOG_COPPER_ZONE Class Reference
Inheritance diagram for DIALOG_COPPER_ZONE:
DIALOG_COPPER_ZONE_BASE DIALOG_SHIM KIWAY_HOLDER

Public Types

enum  HOLDER_TYPE { DIALOG, FRAME, PANEL }
 

Public Member Functions

 DIALOG_COPPER_ZONE (PCB_BASE_FRAME *aParent, ZONE_SETTINGS *aSettings)
 
void SetInitialFocus (wxWindow *aWindow)
 Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown. More...
 
int ShowQuasiModal ()
 
void EndQuasiModal (int retCode)
 
bool IsQuasiModal ()
 
bool Show (bool show) override
 
bool Enable (bool enable) override
 
void OnPaint (wxPaintEvent &event)
 
EDA_UNITS GetUserUnits () const
 
HOLDER_TYPE GetType ()
 
KIWAYKiway () const
 Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in. More...
 
PROJECTPrj () const
 Function Prj returns a reference to the PROJECT "associated with" this KIWAY. More...
 
void SetKiway (wxWindow *aDest, KIWAY *aKiway)
 Function SetKiway. More...
 

Static Public Member Functions

static bool IsCtrl (int aChar, const wxKeyEvent &e)
 
static bool IsShiftCtrl (int aChar, const wxKeyEvent &e)
 
static void FixOSXCancelButtonIssue (wxWindow *aWindow)
 

Protected Types

enum  {
  ID_DIALOG_COPPER_ZONE_BASE = 1000, ID_NETNAME_SELECTION, ID_TEXTCTRL_NETNAMES_FILTER, wxID_APPLY_FILTERS,
  ID_M_PRIORITYLEVELCTRL, ID_M_OUTLINEAPPEARANCECTRL, ID_CORNER_SMOOTHING, ID_M_CORNERSMOOTHINGCTRL,
  ID_M_PADINZONEOPT, wxID_ANTIPAD_SIZE, wxID_COPPER_BRIDGE_VALUE, wxID_BUTTON_EXPORT
}
 

Protected Member Functions

void FinishDialogSettings ()
 In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls. More...
 
void SetSizeInDU (int x, int y)
 Set the dialog to the given dimensions in "dialog units". More...
 
int HorizPixelsFromDU (int x)
 Convert an integer number of dialog units to pixels, horizontally. More...
 
int VertPixelsFromDU (int y)
 Convert an integer number of dialog units to pixels, vertically. More...
 
void ResetSize ()
 Clear the existing dialog size and position. More...
 

Protected Attributes

wxBoxSizer * m_MainBoxSizer
 
wxDataViewListCtrl * m_layers
 
wxListBox * m_ListNetNameSelection
 
wxStaticText * m_staticTextDisplay
 
wxTextCtrl * m_DoNotShowNetNameFilter
 
wxStaticText * m_staticTextVFilter
 
wxTextCtrl * m_ShowNetNameFilter
 
wxButton * m_buttonRunFilter
 
wxCheckBox * m_showAllNetsOpt
 
wxCheckBox * m_sortByPadsOpt
 
wxBoxSizer * m_bNoNetWarning
 
wxStaticBitmap * m_bitmapNoNetWarning
 
wxStaticText * m_staticText18
 
wxCheckBox * m_constrainOutline
 
wxStaticText * m_staticTextPriorityLevel
 
wxSpinCtrl * m_PriorityLevelCtrl
 
wxStaticText * m_staticTextStyle
 
wxChoice * m_OutlineAppearanceCtrl
 
wxStaticLine * m_staticline1
 
wxStaticText * m_staticTextSmoothing
 
wxChoice * m_cornerSmoothingChoice
 
wxStaticText * m_cornerRadiusLabel
 
wxTextCtrl * m_cornerRadiusCtrl
 
wxStaticText * m_cornerRadiusUnits
 
wxStaticText * m_clearanceLabel
 
wxTextCtrl * m_clearanceCtrl
 
wxStaticText * m_clearanceUnits
 
wxStaticText * m_minWidthLabel
 
wxTextCtrl * m_minWidthCtrl
 
wxStaticText * m_minWidthUnits
 
wxStaticText * m_connectionLabel
 
wxChoice * m_PadInZoneOpt
 
wxStaticText * m_antipadLabel
 
wxTextCtrl * m_antipadCtrl
 
wxStaticText * m_antipadUnits
 
wxStaticText * m_spokeWidthLabel
 
wxTextCtrl * m_spokeWidthCtrl
 
wxStaticText * m_spokeWidthUnits
 
wxStaticText * m_staticText39
 
wxTextCtrl * m_tcZoneName
 
wxStaticText * m_staticTextGridFillType
 
wxChoice * m_GridStyleCtrl
 
wxStaticText * m_staticTextGrindOrient
 
wxTextCtrl * m_tcGridStyleOrientation
 
wxStaticText * m_staticTextRotUnits
 
wxStaticText * m_staticTextStyleThickness
 
wxTextCtrl * m_tcGridStyleThickness
 
wxStaticText * m_GridStyleThicknessUnits
 
wxStaticText * m_staticTextGridGap
 
wxTextCtrl * m_tcGridStyleGap
 
wxStaticText * m_GridStyleGapUnits
 
wxStaticText * m_staticTextGridSmoothingLevel
 
wxSpinCtrl * m_spinCtrlSmoothLevel
 
wxStaticText * m_staticTextGridSmootingVal
 
wxSpinCtrlDouble * m_spinCtrlSmoothValue
 
wxStaticText * m_staticText40
 
wxChoice * m_cbRemoveIslands
 
wxStaticText * m_islandThresholdLabel
 
wxTextCtrl * m_tcIslandThreshold
 
wxStaticText * m_islandThresholdUnits
 
wxButton * m_ExportSetupButton
 
wxStdDialogButtonSizer * m_sdbSizer
 
wxButton * m_sdbSizerOK
 
wxButton * m_sdbSizerCancel
 
EDA_UNITS m_units
 
std::string m_hash_key
 
bool m_firstPaintEvent
 
wxWindow * m_initialFocusTarget
 
WX_EVENT_LOOPm_qmodal_loop
 
bool m_qmodal_showing
 
WDO_ENABLE_DISABLEm_qmodal_parent_disabler
 
EDA_BASE_FRAMEm_parentFrame
 
std::vector< wxWindow * > m_tabOrder
 

Private Member Functions

bool TransferDataToWindow () override
 
bool TransferDataFromWindow () override
 
bool AcceptOptions (bool aUseExportableSetupOnly=false)
 
void OnStyleSelection (wxCommandEvent &event) override
 
void OnLayerSelection (wxDataViewEvent &event) override
 
void OnNetSortingOptionSelected (wxCommandEvent &event) override
 
void ExportSetupToOtherCopperZones (wxCommandEvent &event) override
 
void OnRunFiltersButtonClick (wxCommandEvent &event) override
 
void OnUpdateUI (wxUpdateUIEvent &) override
 
void OnButtonCancelClick (wxCommandEvent &event) override
 
void OnClose (wxCloseEvent &event) override
 
void buildAvailableListOfNets ()
 

Private Attributes

PCB_BASE_FRAMEm_Parent
 
bool m_settingsExported
 
ZONE_SETTINGS m_settings
 
ZONE_SETTINGSm_ptr
 
bool m_NetSortingByPadCount
 
long m_NetFiltering
 
int m_cornerSmoothingType
 
UNIT_BINDER m_cornerRadius
 
UNIT_BINDER m_clearance
 
UNIT_BINDER m_minWidth
 
UNIT_BINDER m_antipadClearance
 
UNIT_BINDER m_spokeWidth
 
UNIT_BINDER m_gridStyleRotation
 
UNIT_BINDER m_gridStyleThickness
 
UNIT_BINDER m_gridStyleGap
 
UNIT_BINDER m_islandThreshold
 

Static Private Attributes

static wxString m_netNameShowFilter
 

Detailed Description

Definition at line 40 of file dialog_copper_zones.cpp.

Member Enumeration Documentation

◆ anonymous enum

anonymous enum
protectedinherited
Enumerator
ID_DIALOG_COPPER_ZONE_BASE 
ID_NETNAME_SELECTION 
ID_TEXTCTRL_NETNAMES_FILTER 
wxID_APPLY_FILTERS 
ID_M_PRIORITYLEVELCTRL 
ID_M_OUTLINEAPPEARANCECTRL 
ID_CORNER_SMOOTHING 
ID_M_CORNERSMOOTHINGCTRL 
ID_M_PADINZONEOPT 
wxID_ANTIPAD_SIZE 
wxID_COPPER_BRIDGE_VALUE 
wxID_BUTTON_EXPORT 

Definition at line 47 of file dialog_copper_zones_base.h.

◆ HOLDER_TYPE

enum KIWAY_HOLDER::HOLDER_TYPE
inherited
Enumerator
DIALOG 
FRAME 
PANEL 

Definition at line 42 of file kiway_holder.h.

Constructor & Destructor Documentation

◆ DIALOG_COPPER_ZONE()

DIALOG_COPPER_ZONE::DIALOG_COPPER_ZONE ( PCB_BASE_FRAME aParent,
ZONE_SETTINGS aSettings 
)

Definition at line 106 of file dialog_copper_zones.cpp.

106  :
107  DIALOG_COPPER_ZONE_BASE( aParent ),
115  m_staticTextRotUnits, false ),
121 {
122  m_Parent = aParent;
124 
125  m_ptr = aSettings;
126  m_settings = *aSettings;
128 
129  m_settingsExported = false;
130 
131  m_NetFiltering = false;
132  m_NetSortingByPadCount = true; // false = alphabetic sort, true = pad count sort
133 
134  m_sdbSizerOK->SetDefault();
135 
136  m_cbRemoveIslands->Bind( wxEVT_CHOICE,
137  [&]( wxCommandEvent& )
138  {
139  // Area mode is index 2
140  bool val = m_cbRemoveIslands->GetSelection() == 2;
141 
142  m_tcIslandThreshold->Enable( val );
143  m_islandThresholdLabel->Enable( val );
144  m_islandThresholdUnits->Enable( val );
145  } );
146 
148 }
void FinishDialogSettings()
In all dialogs, we must call the same functions to fix minimal dlg size, the default position and per...
wxBitmap KiBitmap(BITMAP_DEF aBitmap)
Construct a wxBitmap from a memory record, held in a BITMAP_DEF.
Definition: bitmap.cpp:80
PCB_BASE_FRAME * m_Parent
const BITMAP_OPAQUE dialog_warning_xpm[1]
UNIT_BINDER m_gridStyleThickness
DIALOG_COPPER_ZONE_BASE(wxWindow *parent, wxWindowID id=ID_DIALOG_COPPER_ZONE_BASE, const wxString &title=_("Copper Zone Properties"), const wxPoint &pos=wxDefaultPosition, const wxSize &size=wxSize(-1,-1), long style=wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER)
void SetupLayersList(wxDataViewListCtrl *aList, PCB_BASE_FRAME *aFrame, bool aShowCopper, bool aFpEditorMode=false)
A helper routine for the various zone dialogs (copper, non-copper, keepout).

References dialog_warning_xpm, DIALOG_SHIM::FinishDialogSettings(), KiBitmap(), DIALOG_COPPER_ZONE_BASE::m_bitmapNoNetWarning, DIALOG_COPPER_ZONE_BASE::m_cbRemoveIslands, DIALOG_COPPER_ZONE_BASE::m_islandThresholdLabel, DIALOG_COPPER_ZONE_BASE::m_islandThresholdUnits, DIALOG_COPPER_ZONE_BASE::m_layers, m_NetFiltering, m_NetSortingByPadCount, m_Parent, m_ptr, DIALOG_COPPER_ZONE_BASE::m_sdbSizerOK, m_settings, m_settingsExported, DIALOG_COPPER_ZONE_BASE::m_tcIslandThreshold, and ZONE_SETTINGS::SetupLayersList().

Member Function Documentation

◆ AcceptOptions()

bool DIALOG_COPPER_ZONE::AcceptOptions ( bool  aUseExportableSetupOnly = false)
private
Parameters
aUseExportableSetupOnlyis true to use exportable parameters only (used to export this setup to other zones).
Returns
bool - false if incorrect options, true if ok.

Definition at line 342 of file dialog_copper_zones.cpp.

343 {
344  if( !m_clearance.Validate( 0, Mils2iu( ZONE_CLEARANCE_MAX_VALUE_MIL ) ) )
345  return false;
346 
347  if( !m_minWidth.Validate( Mils2iu( ZONE_THICKNESS_MIN_VALUE_MIL ), INT_MAX ) )
348  return false;
349 
350  if( !m_cornerRadius.Validate( 0, INT_MAX ) )
351  return false;
352 
353  if( !m_spokeWidth.Validate( 0, INT_MAX ) )
354  return false;
355 
357 
359  {
360  int minThickness = m_minWidth.GetValue();
361 
362  if( !m_gridStyleThickness.Validate( minThickness, INT_MAX ) )
363  return false;
364 
365  if( !m_gridStyleGap.Validate( minThickness, INT_MAX ) )
366  return false;
367  }
368 
369  switch( m_PadInZoneOpt->GetSelection() )
370  {
371  case 3:
373  break;
374  case 2:
376  break;
377  case 1:
379  break;
380  case 0:
382  break;
383  }
384 
385  switch( m_OutlineAppearanceCtrl->GetSelection() )
386  {
387  case 0:
389  break;
390  case 1:
392  break;
393  case 2:
395  break;
396  }
397 
398  auto cfg = m_Parent->GetPcbNewSettings();
399 
400  cfg->m_Zones.hatching_style = static_cast<int>( m_settings.m_Zone_HatchingStyle );
401  cfg->m_Zones.net_filter = m_DoNotShowNetNameFilter->GetValue().ToStdString();
402 
404 
407 
409 
411  ? 0 : m_cornerRadius.GetValue() );
412 
414 
416 
419 
421  {
422  DisplayError( this, _( "Thermal spoke width cannot be smaller than the minimum width." ) );
423  return false;
424  }
425 
426  cfg->m_Zones.clearance = Iu2Mils( m_settings.m_ZoneClearance );
427  cfg->m_Zones.min_thickness = Iu2Mils( m_settings.m_ZoneMinThickness );
428  cfg->m_Zones.thermal_relief_gap = Iu2Mils( m_settings.m_ThermalReliefGap );
429  cfg->m_Zones.thermal_relief_copper_width = Iu2Mils( m_settings.m_ThermalReliefCopperBridge );
430 
432  static_cast<ISLAND_REMOVAL_MODE>( m_cbRemoveIslands->GetSelection() ) );
434 
435  // If we use only exportable to others zones parameters, exit here:
436  if( aUseExportableSetupOnly )
437  return true;
438 
439  // Get the layer selection for this zone
440  int layer = -1;
441  for( int ii = 0; ii < m_layers->GetItemCount(); ++ii )
442  {
443  if( m_layers->GetToggleValue( (unsigned) ii, 0 ) )
444  {
445  layer = ii;
446  break;
447  }
448  }
449 
450  if( layer < 0 )
451  {
452  DisplayError( this, _( "No layer selected." ) );
453  return false;
454  }
455 
456  NETINFO_ITEM* net = nullptr;
457 
458  // Search net_code for this net, if a net was selected
459  if( m_ListNetNameSelection->GetSelection() > 0 )
460  {
461  wxString netname = m_ListNetNameSelection->GetStringSelection();
462  net = m_Parent->GetBoard()->FindNet( netname );
463  }
464 
465  m_settings.m_NetcodeSelection = net ? net->GetNet() : 0;
466 
467  m_settings.m_Name = m_tcZoneName->GetValue();
468 
469  return true;
470 }
void DisplayError(wxWindow *aParent, const wxString &aText, int aDisplayTime)
Display an error or warning message box with aMessage.
Definition: confirm.cpp:239
void SetMinIslandArea(long long int aArea)
NETINFO_ITEM * FindNet(int aNetcode) const
Function FindNet searches for a net with the given netcode.
void SetIslandRemovalMode(ISLAND_REMOVAL_MODE aRemove)
static wxString m_netNameShowFilter
void SetCornerSmoothingType(int aType)
long m_ThermalReliefCopperBridge
thickness of the copper bridge in thermal reliefs
int GetCornerSmoothingType() const
#define ZONE_CLEARANCE_MAX_VALUE_MIL
Definition: zones.h:34
wxString m_Name
Unique name for the current zone (can be blank)
Definition: zone_settings.h:95
PCBNEW_SETTINGS * GetPcbNewSettings()
T NormalizeAngle180(T Angle)
Normalize angle to be in the -180.0 .. 180.0 range.
Definition: trigo.h:345
int m_NetcodeSelection
Net code selection for the current zone.
Definition: zone_settings.h:93
pads are covered by copper
void SetPadConnection(ZONE_CONNECTION aPadConnection)
PCB_BASE_FRAME * m_Parent
int m_ZonePriority
Priority (0 ... N) of the zone.
Definition: zone_settings.h:81
ZONE_HATCH_STYLE m_Zone_HatchingStyle
Option to show the zone area (outlines only, short hatches or full hatches.
int m_ZoneClearance
Minimal clearance value.
Definition: zone_settings.h:83
Thermal relief only for THT pads.
virtual bool Validate(double aMin, double aMax, EDA_UNITS aUnits=EDA_UNITS::UNSCALED, bool aUseMils=false)
Function Validate Validates the control against the given range, informing the user of any errors fou...
Use thermal relief for pads.
ZONE_FILL_MODE m_FillMode
Definition: zone_settings.h:79
NETINFO_ITEM handles the data for a net.
Definition: netinfo.h:65
#define ZONE_THICKNESS_MIN_VALUE_MIL
Definition: zones.h:32
int GetNet() const
Function GetNet.
Definition: netinfo.h:223
UNIT_BINDER m_gridStyleThickness
#define _(s)
Definition: 3d_actions.cpp:33
virtual void SetValue(int aValue)
Function SetValue Sets new value (in Internal Units) for the text field, taking care of units convers...
void SetCornerRadius(int aRadius)
Pads are not covered.
virtual long long int GetValue()
Function GetValue Returns the current value in Internal Units.
BOARD * GetBoard() const
long m_ThermalReliefGap
thickness of the gap in thermal reliefs
int m_ZoneMinThickness
Min thickness value in filled areas.
Definition: zone_settings.h:84

References _, DIAGONAL_EDGE, DIAGONAL_FULL, DisplayError(), BOARD::FindNet(), FULL, PCB_BASE_FRAME::GetBoard(), ZONE_SETTINGS::GetCornerSmoothingType(), NETINFO_ITEM::GetNet(), PCB_BASE_FRAME::GetPcbNewSettings(), UNIT_BINDER::GetValue(), HATCH_PATTERN, PCBNEW_SETTINGS::ZONES::hatching_style, m_antipadClearance, DIALOG_COPPER_ZONE_BASE::m_cbRemoveIslands, m_clearance, DIALOG_COPPER_ZONE_BASE::m_constrainOutline, m_cornerRadius, DIALOG_COPPER_ZONE_BASE::m_cornerSmoothingChoice, DIALOG_COPPER_ZONE_BASE::m_DoNotShowNetNameFilter, ZONE_SETTINGS::m_FillMode, m_gridStyleGap, m_gridStyleRotation, m_gridStyleThickness, m_islandThreshold, DIALOG_COPPER_ZONE_BASE::m_layers, DIALOG_COPPER_ZONE_BASE::m_ListNetNameSelection, m_minWidth, ZONE_SETTINGS::m_Name, ZONE_SETTINGS::m_NetcodeSelection, m_netNameShowFilter, DIALOG_COPPER_ZONE_BASE::m_OutlineAppearanceCtrl, DIALOG_COPPER_ZONE_BASE::m_PadInZoneOpt, m_Parent, DIALOG_COPPER_ZONE_BASE::m_PriorityLevelCtrl, m_settings, DIALOG_COPPER_ZONE_BASE::m_ShowNetNameFilter, m_spokeWidth, DIALOG_COPPER_ZONE_BASE::m_tcZoneName, ZONE_SETTINGS::m_ThermalReliefCopperBridge, ZONE_SETTINGS::m_ThermalReliefGap, ZONE_SETTINGS::m_Zone_45_Only, ZONE_SETTINGS::m_Zone_HatchingStyle, ZONE_SETTINGS::m_ZoneClearance, ZONE_SETTINGS::m_ZoneMinThickness, ZONE_SETTINGS::m_ZonePriority, PCBNEW_SETTINGS::m_Zones, NO_HATCH, NONE, NormalizeAngle180(), ZONE_SETTINGS::SetCornerRadius(), ZONE_SETTINGS::SetCornerSmoothingType(), ZONE_SETTINGS::SetIslandRemovalMode(), ZONE_SETTINGS::SetMinIslandArea(), ZONE_SETTINGS::SetPadConnection(), UNIT_BINDER::SetValue(), ZONE_SETTINGS::SMOOTHING_NONE, THERMAL, THT_THERMAL, UNIT_BINDER::Validate(), ZONE_CLEARANCE_MAX_VALUE_MIL, and ZONE_THICKNESS_MIN_VALUE_MIL.

Referenced by ExportSetupToOtherCopperZones(), and TransferDataFromWindow().

◆ buildAvailableListOfNets()

void DIALOG_COPPER_ZONE::buildAvailableListOfNets ( )
private

Definition at line 551 of file dialog_copper_zones.cpp.

552 {
553  wxArrayString listNetName;
554 
556 
557  if( m_NetFiltering )
558  {
559  wxString doNotShowFilter = m_DoNotShowNetNameFilter->GetValue();
560  wxString ShowFilter = m_ShowNetNameFilter->GetValue();
561 
562  for( unsigned ii = 0; ii < listNetName.GetCount(); ii++ )
563  {
564  if( listNetName[ii].Matches( doNotShowFilter ) )
565  {
566  listNetName.RemoveAt( ii );
567  ii--;
568  }
569  else if( !listNetName[ii].Matches( ShowFilter ) )
570  {
571  listNetName.RemoveAt( ii );
572  ii--;
573  }
574  }
575  }
576 
577  listNetName.Insert( wxT( "<no net>" ), 0 );
578 
579  // Ensure currently selected net for the zone is visible, regardless of filters
580  int selectedNetListNdx = 0;
581  int net_select = m_settings.m_NetcodeSelection;
582 
583  if( net_select > 0 )
584  {
585  NETINFO_ITEM* selectedNet = m_Parent->GetBoard()->FindNet( net_select );
586  if( selectedNet )
587  {
588  selectedNetListNdx = listNetName.Index( selectedNet->GetNetname() );
589 
590  if( wxNOT_FOUND == selectedNetListNdx )
591  {
592  // the currently selected net must *always* be visible.
593  // <no net> is the zero'th index, so pick next lowest
594  listNetName.Insert( selectedNet->GetNetname(), 1 );
595  selectedNetListNdx = 1;
596  }
597  }
598  }
599 
600  m_ListNetNameSelection->Clear();
601  m_ListNetNameSelection->InsertItems( listNetName, 0 );
602  m_ListNetNameSelection->SetSelection( selectedNetListNdx );
603  m_ListNetNameSelection->EnsureVisible( selectedNetListNdx );
604 }
NETINFO_ITEM * FindNet(int aNetcode) const
Function FindNet searches for a net with the given netcode.
int m_NetcodeSelection
Net code selection for the current zone.
Definition: zone_settings.h:93
PCB_BASE_FRAME * m_Parent
int SortedNetnamesList(wxArrayString &aNames, bool aSortbyPadsCount)
Function SortedNetnamesList.
const wxString & GetNetname() const
Function GetNetname.
Definition: netinfo.h:231
NETINFO_ITEM handles the data for a net.
Definition: netinfo.h:65
BOARD * GetBoard() const

References BOARD::FindNet(), PCB_BASE_FRAME::GetBoard(), NETINFO_ITEM::GetNetname(), DIALOG_COPPER_ZONE_BASE::m_DoNotShowNetNameFilter, DIALOG_COPPER_ZONE_BASE::m_ListNetNameSelection, ZONE_SETTINGS::m_NetcodeSelection, m_NetFiltering, m_NetSortingByPadCount, m_Parent, m_settings, DIALOG_COPPER_ZONE_BASE::m_ShowNetNameFilter, and BOARD::SortedNetnamesList().

Referenced by OnNetSortingOptionSelected(), OnRunFiltersButtonClick(), and TransferDataToWindow().

◆ Enable()

bool DIALOG_SHIM::Enable ( bool  enable)
overrideinherited

Definition at line 269 of file dialog_shim.cpp.

270 {
271  // so we can do logging of this state change:
272 
273 #if 0 && defined(DEBUG)
274  const char* type_id = typeid( *this ).name();
275  printf( "DIALOG_SHIM %s: %s\n", type_id, enable ? "enabled" : "disabled" );
276  fflush(0); //Needed on msys2 to immediately print the message
277 #endif
278 
279  return wxDialog::Enable( enable );
280 }

◆ EndQuasiModal()

void DIALOG_SHIM::EndQuasiModal ( int  retCode)
inherited

Definition at line 399 of file dialog_shim.cpp.

400 {
401  // Hook up validator and transfer data from controls handling so quasi-modal dialogs
402  // handle validation in the same way as other dialogs.
403  if( ( retCode == wxID_OK ) && ( !Validate() || !TransferDataFromWindow() ) )
404  return;
405 
406  SetReturnCode( retCode );
407 
408  if( !IsQuasiModal() )
409  {
410  wxFAIL_MSG( "either DIALOG_SHIM::EndQuasiModal called twice or ShowQuasiModal"
411  "wasn't called" );
412  return;
413  }
414 
415  if( m_qmodal_loop )
416  {
417  if( m_qmodal_loop->IsRunning() )
418  m_qmodal_loop->Exit( 0 );
419  else
420  m_qmodal_loop->ScheduleExit( 0 );
421 
423  }
424 
427 
428  Show( false );
429 }
WX_EVENT_LOOP * m_qmodal_loop
Definition: dialog_shim.h:206
#define NULL
bool IsQuasiModal()
Definition: dialog_shim.h:123
bool Show(bool show) override
WDO_ENABLE_DISABLE * m_qmodal_parent_disabler
Definition: dialog_shim.h:209

References DIALOG_SHIM::IsQuasiModal(), DIALOG_SHIM::m_qmodal_loop, DIALOG_SHIM::m_qmodal_parent_disabler, NULL, and DIALOG_SHIM::Show().

Referenced by HK_PROMPT_DIALOG::EndFlexible(), DIALOG_SHIM::OnButton(), DIALOG_EDIT_COMPONENTS_LIBID::onCancel(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnCancelButtonClick(), DIALOG_EDIT_COMPONENT_IN_LIBRARY::OnCancelButtonClick(), DIALOG_LIB_EDIT_PIN_TABLE::OnClose(), DIALOG_PRINT_GENERIC::onCloseButton(), DIALOG_CHOOSE_FOOTPRINT::OnCloseTimer(), DIALOG_CHOOSE_COMPONENT::OnCloseTimer(), DIALOG_SHIM::OnCloseWindow(), HTML_MESSAGE_BOX::OnOKButtonClick(), DIALOG_CHOOSE_FOOTPRINT::OnUseBrowser(), DIALOG_CHOOSE_COMPONENT::OnUseBrowser(), and DIALOG_SHIM::~DIALOG_SHIM().

◆ ExportSetupToOtherCopperZones()

void DIALOG_COPPER_ZONE::ExportSetupToOtherCopperZones ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 518 of file dialog_copper_zones.cpp.

519 {
520  if( !AcceptOptions( true ) )
521  return;
522 
523  // Export settings ( but layer and netcode ) to others copper zones
524  BOARD* pcb = m_Parent->GetBoard();
525 
526  for( int ii = 0; ii < pcb->GetAreaCount(); ii++ )
527  {
528  ZONE_CONTAINER* zone = pcb->GetArea( ii );
529 
530  // Cannot export settings from a copper zone
531  // to a zone keepout:
532  if( zone->GetIsKeepout() )
533  continue;
534 
535  m_settings.ExportSetting( *zone, false ); // false = partial export
536  m_settingsExported = true;
537  m_Parent->OnModify();
538  }
539 }
ZONE_CONTAINER handles a list of polygons defining a copper zone.
Definition: class_zone.h:61
bool AcceptOptions(bool aUseExportableSetupOnly=false)
int GetAreaCount() const
Function GetAreaCount.
Definition: class_board.h:932
PCB_BASE_FRAME * m_Parent
void ExportSetting(ZONE_CONTAINER &aTarget, bool aFullExport=true) const
Function ExportSetting copy settings to a given zone.
bool GetIsKeepout() const
Accessors to parameters used in Keepout zones:
Definition: class_zone.h:702
virtual void OnModify()
Function OnModify Must be called after a change in order to set the "modify" flag of the current scre...
BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:180
ZONE_CONTAINER * GetArea(int index) const
Function GetArea returns the Area (Zone Container) at a given index.
Definition: class_board.h:897
BOARD * GetBoard() const

References AcceptOptions(), ZONE_SETTINGS::ExportSetting(), BOARD::GetArea(), BOARD::GetAreaCount(), PCB_BASE_FRAME::GetBoard(), ZONE_CONTAINER::GetIsKeepout(), m_Parent, m_settings, m_settingsExported, and PCB_BASE_FRAME::OnModify().

◆ FinishDialogSettings()

void DIALOG_SHIM::FinishDialogSettings ( )
protectedinherited

In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls.

FinishDialogSettings must be called from derived classes, when all widgets are initialized, and therefore their size fixed. If TransferDataToWindow() is used to initialize widgets, at end of TransferDataToWindow, or better at end of a wxInitDialogEvent handler

In any case, the best way is to call it in a wxInitDialogEvent handler after calling TransfertDataToWindow(), which is the default wxInitDialogEvent handler wxDialog

Definition at line 144 of file dialog_shim.cpp.

145 {
146  // must be called from the constructor of derived classes,
147  // when all widgets are initialized, and therefore their size fixed
148 
149  // SetSizeHints fixes the minimal size of sizers in the dialog
150  // (SetSizeHints calls Fit(), so no need to call it)
151  GetSizer()->SetSizeHints( this );
152 
153  // the default position, when calling the first time the dlg
154  Center();
155 }

References PCAD2KICAD::Center.

Referenced by DIALOG_3D_VIEW_OPTIONS::DIALOG_3D_VIEW_OPTIONS(), DIALOG_ANNOTATE::DIALOG_ANNOTATE(), DIALOG_BOARD_SETUP::DIALOG_BOARD_SETUP(), DIALOG_BOM::DIALOG_BOM(), DIALOG_COPPER_ZONE(), DIALOG_DRC::DIALOG_DRC(), DIALOG_EDIT_COMPONENT_IN_LIBRARY::DIALOG_EDIT_COMPONENT_IN_LIBRARY(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC(), DIALOG_EDIT_COMPONENTS_LIBID::DIALOG_EDIT_COMPONENTS_LIBID(), DIALOG_EDIT_LINE_STYLE::DIALOG_EDIT_LINE_STYLE(), DIALOG_EDIT_SHEET_PIN::DIALOG_EDIT_SHEET_PIN(), DIALOG_EDITOR_DATA::DIALOG_EDITOR_DATA(), DIALOG_ENUM_PADS::DIALOG_ENUM_PADS(), DIALOG_ERC::DIALOG_ERC(), DIALOG_EXCHANGE_FOOTPRINTS::DIALOG_EXCHANGE_FOOTPRINTS(), DIALOG_EXPORT_3DFILE::DIALOG_EXPORT_3DFILE(), DIALOG_EXPORT_IDF3::DIALOG_EXPORT_IDF3(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_EXPORT_SVG::DIALOG_EXPORT_SVG(), DIALOG_FIELDS_EDITOR_GLOBAL::DIALOG_FIELDS_EDITOR_GLOBAL(), DIALOG_FOOTPRINT_BOARD_EDITOR::DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::DIALOG_FOOTPRINT_FP_EDITOR(), DIALOG_FOOTPRINT_WIZARD_LIST::DIALOG_FOOTPRINT_WIZARD_LIST(), DIALOG_GENCAD_EXPORT_OPTIONS::DIALOG_GENCAD_EXPORT_OPTIONS(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS(), DIALOG_GLOBAL_LIB_TABLE_CONFIG::DIALOG_GLOBAL_LIB_TABLE_CONFIG(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_IMAGE_EDITOR::DIALOG_IMAGE_EDITOR(), DIALOG_INSPECTOR::DIALOG_INSPECTOR(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_KEEPOUT_AREA_PROPERTIES::DIALOG_KEEPOUT_AREA_PROPERTIES(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_LIB_EDIT_DRAW_ITEM::DIALOG_LIB_EDIT_DRAW_ITEM(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), DIALOG_LIB_EDIT_TEXT::DIALOG_LIB_EDIT_TEXT(), DIALOG_LIB_NEW_COMPONENT::DIALOG_LIB_NEW_COMPONENT(), DIALOG_LIST_HOTKEYS::DIALOG_LIST_HOTKEYS(), DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT(), DIALOG_NETLIST::DIALOG_NETLIST(), DIALOG_NON_COPPER_ZONES_EDITOR::DIALOG_NON_COPPER_ZONES_EDITOR(), DIALOG_PAD_PRIMITIVE_POLY_PROPS::DIALOG_PAD_PRIMITIVE_POLY_PROPS(), DIALOG_PAD_PRIMITIVES_PROPERTIES::DIALOG_PAD_PRIMITIVES_PROPERTIES(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PASTE_SPECIAL::DIALOG_PASTE_SPECIAL(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_PRINT_GENERIC::DIALOG_PRINT_GENERIC(), DIALOG_PRINT_USING_PRINTER::DIALOG_PRINT_USING_PRINTER(), DIALOG_PUSH_PAD_PROPERTIES::DIALOG_PUSH_PAD_PROPERTIES(), DIALOG_SCH_SHEET_PROPS::DIALOG_SCH_SHEET_PROPS(), DIALOG_SCHEMATIC_SETUP::DIALOG_SCHEMATIC_SETUP(), DIALOG_SELECT_NET_FROM_LIST::DIALOG_SELECT_NET_FROM_LIST(), DIALOG_SWAP_LAYERS::DIALOG_SWAP_LAYERS(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), DIALOG_TRACK_VIA_SIZE::DIALOG_TRACK_VIA_SIZE(), DIALOG_UPDATE_FROM_PCB::DIALOG_UPDATE_FROM_PCB(), DIALOG_UPDATE_PCB::DIALOG_UPDATE_PCB(), DLG_SELECT_3DMODEL::DLG_SELECT_3DMODEL(), PAGED_DIALOG::finishInitialization(), DIALOG_EDIT_ONE_FIELD::init(), DIALOG_EDIT_LIBRARY_TABLES::InstallPanel(), NETLIST_DIALOG::NETLIST_DIALOG(), DIALOG_GRAPHIC_ITEM_PROPERTIES::OnInitDlg(), DIALOG_SCH_SHEET_PROPS::OnInitDlg(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnInitDlg(), DIALOG_SIM_SETTINGS::onInitDlg(), DIALOG_SPICE_MODEL::onInitDlg(), DIALOG_SIGNAL_LIST::TransferDataToWindow(), DIALOG_UPDATE_FIELDS::TransferDataToWindow(), DIALOG_COLOR_PICKER::TransferDataToWindow(), and DIALOG_BOARD_STATISTICS::TransferDataToWindow().

◆ FixOSXCancelButtonIssue()

static void DIALOG_SHIM::FixOSXCancelButtonIssue ( wxWindow *  aWindow)
staticinherited

◆ GetType()

HOLDER_TYPE KIWAY_HOLDER::GetType ( )
inlineinherited

Definition at line 49 of file kiway_holder.h.

49 { return m_type; }
HOLDER_TYPE m_type
Definition: kiway_holder.h:82

References KIWAY_HOLDER::m_type.

Referenced by DIALOG_SHIM::DIALOG_SHIM().

◆ GetUserUnits()

◆ HorizPixelsFromDU()

int DIALOG_SHIM::HorizPixelsFromDU ( int  x)
protectedinherited

Convert an integer number of dialog units to pixels, horizontally.

See SetSizeInDU or wxDialog documentation for more information.

Definition at line 165 of file dialog_shim.cpp.

166 {
167  wxSize sz( x, 0 );
168  return ConvertDialogToPixels( sz ).x;
169 }

Referenced by DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), and DIALOG_CHOOSE_FOOTPRINT::DIALOG_CHOOSE_FOOTPRINT().

◆ IsCtrl()

static bool DIALOG_SHIM::IsCtrl ( int  aChar,
const wxKeyEvent &  e 
)
inlinestaticinherited

Definition at line 136 of file dialog_shim.h.

137  {
138  return e.GetKeyCode() == aChar && e.ControlDown() && !e.AltDown() &&
139  !e.ShiftDown() && !e.MetaDown();
140  }

Referenced by DIALOG_TEXT_PROPERTIES::OnCharHook().

◆ IsQuasiModal()

◆ IsShiftCtrl()

static bool DIALOG_SHIM::IsShiftCtrl ( int  aChar,
const wxKeyEvent &  e 
)
inlinestaticinherited

Definition at line 142 of file dialog_shim.h.

143  {
144  return e.GetKeyCode() == aChar && e.ControlDown() && !e.AltDown() &&
145  e.ShiftDown() && !e.MetaDown();
146  }

Referenced by DIALOG_TEXT_PROPERTIES::OnCharHook().

◆ Kiway()

KIWAY& KIWAY_HOLDER::Kiway ( ) const
inlineinherited

Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in.

A KIWAY_HOLDER is not necessarily a KIWAY_PLAYER.

Definition at line 56 of file kiway_holder.h.

57  {
58  wxASSERT( m_kiway ); // smoke out bugs in Debug build, then Release runs fine.
59  return *m_kiway;
60  }
KIWAY * m_kiway
Definition: kiway_holder.h:81

References KIWAY_HOLDER::m_kiway.

Referenced by TREEPROJECT_ITEM::Activate(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), PCB_BASE_EDIT_FRAME::AddLibrary(), LIB_CONTROL::AddSymbolToSchematic(), CVPCB_MAINFRAME::BuildLIBRARY_LISTBOX(), COMMON_CONTROL::ConfigurePaths(), DIALOG_CHOOSE_FOOTPRINT::ConstructRightPanel(), DIALOG_CHOOSE_COMPONENT::ConstructRightPanel(), PCB_BASE_FRAME::CreateAndShow3D_Frame(), CVPCB_MAINFRAME::CVPCB_MAINFRAME(), DIALOG_RESCUE_EACH::DIALOG_RESCUE_EACH(), DIALOG_SHIM::DIALOG_SHIM(), CVPCB_MAINFRAME::DisplayStatus(), FIELDS_GRID_TRICKS::doPopupSelection(), FIELDS_EDITOR_GRID_TRICKS::doPopupSelection(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), SCH_EDITOR_CONTROL::EditWithLibEdit(), BACK_ANNOTATE::FetchNetlistFromPCB(), DISPLAY_FOOTPRINTS_FRAME::GetModule(), PCB_EDIT_FRAME::importFile(), KICAD_MANAGER_FRAME::language_change(), KIWAY_PLAYER::language_change(), LIB_TREE_MODEL_ADAPTER::LIB_TREE_MODEL_ADAPTER(), CVPCB_MAINFRAME::LoadFootprintFiles(), KICAD_MANAGER_FRAME::LoadProject(), TEXT_BUTTON_SYMBOL_CHOOSER::OnButtonClick(), TEXT_BUTTON_FP_CHOOSER::OnButtonClick(), KICAD_MANAGER_FRAME::OnCloseWindow(), SCH_EDIT_FRAME::OnCloseWindow(), PL_EDITOR_FRAME::OnExit(), SCH_EDIT_FRAME::OnExit(), FOOTPRINT_EDIT_FRAME::OnExitKiCad(), FOOTPRINT_VIEWER_FRAME::OnExitKiCad(), LIB_EDIT_FRAME::OnExitKiCad(), SAVE_AS_TRAVERSER::OnFile(), KICAD_MANAGER_FRAME::OnImportEagleFiles(), DIALOG_CHOOSE_COMPONENT::OnInitDialog(), SCH_EDIT_FRAME::OnOpenCvpcb(), SCH_EDIT_FRAME::OnOpenPcbnew(), EDA_BASE_FRAME::OnPreferences(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), DIALOG_EDIT_ONE_FIELD::OnTextValueSelectButtonClick(), KICAD_MANAGER_FRAME::OnUnarchiveFiles(), FOOTPRINT_EDIT_FRAME::OnUpdateInsertModuleInBoard(), FOOTPRINT_EDIT_FRAME::OnUpdateLoadModuleFromBoard(), SCH_EDIT_FRAME::OnUpdatePCB(), KIWAY_HOLDER::Prj(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), FOOTPRINT_VIEWER_FRAME::ReCreateFootprintList(), LIB_EDIT_FRAME::refreshSchematic(), SCH_EDITOR_CONTROL::rescueProject(), EE_INSPECTION_TOOL::RunSimulation(), CVPCB_MAINFRAME::SaveFootprintAssociation(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), LIB_TREE_MODEL_ADAPTER::SavePinnedItems(), SCH_BASE_FRAME::SelectComponentFromLibBrowser(), SCH_EDIT_FRAME::SendCrossProbeClearHighlight(), SCH_EDIT_FRAME::SendCrossProbeNetName(), PCB_EDIT_FRAME::SendCrossProbeNetName(), CVPCB_MAINFRAME::SendMessageToEESCHEMA(), PCB_EDIT_FRAME::SendMessageToEESCHEMA(), SCH_EDIT_FRAME::SendMessageToPCBNEW(), SCH_EDIT_FRAME::sendNetlistToCvpcb(), SCH_EDIT_FRAME::SetCrossProbeConnection(), CVPCB_CONTROL::ShowFootprintViewer(), COMMON_CONTROL::ShowLibraryTable(), COMMON_CONTROL::ShowPlayer(), KICAD_MANAGER_CONTROL::ShowPlayer(), SIM_PLOT_FRAME::SIM_PLOT_FRAME(), PCB_EDITOR_CONTROL::UpdateSchematicFromPCB(), and DIALOG_EXCHANGE_FOOTPRINTS::ViewAndSelectFootprint().

◆ OnButtonCancelClick()

void DIALOG_COPPER_ZONE::OnButtonCancelClick ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 305 of file dialog_copper_zones.cpp.

306 {
307  // After an "Export Settings to Other Zones" cancel and close must return
308  // ZONE_EXPORT_VALUES instead of wxID_CANCEL.
309  Close( true );
310 }

◆ OnClose()

void DIALOG_COPPER_ZONE::OnClose ( wxCloseEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 336 of file dialog_copper_zones.cpp.

337 {
338  EndModal( m_settingsExported ? ZONE_EXPORT_VALUES : wxID_CANCEL );
339 }
#define ZONE_EXPORT_VALUES
Definition: zones.h:37

References m_settingsExported, and ZONE_EXPORT_VALUES.

◆ OnLayerSelection()

void DIALOG_COPPER_ZONE::OnLayerSelection ( wxDataViewEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 484 of file dialog_copper_zones.cpp.

485 {
486  if( event.GetColumn() != 0 )
487  return;
488 
489  int row = m_layers->ItemToRow( event.GetItem() );
490 
491  wxVariant layerID;
492  m_layers->GetValue( layerID, row, 2 );
493  m_settings.m_Layers.set( ToLAYER_ID( layerID.GetInteger() ),
494  m_layers->GetToggleValue( row, 0 ) );
495 }
LSET m_Layers
Layers that this zone exists on.
Definition: zone_settings.h:97
PCB_LAYER_ID ToLAYER_ID(int aLayer)
Definition: lset.cpp:849

References DIALOG_COPPER_ZONE_BASE::m_layers, ZONE_SETTINGS::m_Layers, m_settings, and ToLAYER_ID().

◆ OnNetSortingOptionSelected()

void DIALOG_COPPER_ZONE::OnNetSortingOptionSelected ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 498 of file dialog_copper_zones.cpp.

499 {
500  m_NetFiltering = !m_showAllNetsOpt->GetValue();
503 
505 
506  auto cfg = m_Parent->GetPcbNewSettings();
507 
508  int configValue = m_NetFiltering ? 2 : 0;
509 
511  configValue += 1;
512 
513  cfg->m_Zones.net_sort_mode = configValue;
514  cfg->m_Zones.net_filter = m_DoNotShowNetNameFilter->GetValue().ToStdString();
515 }
static wxString m_netNameShowFilter
PCBNEW_SETTINGS * GetPcbNewSettings()
PCB_BASE_FRAME * m_Parent

References buildAvailableListOfNets(), PCB_BASE_FRAME::GetPcbNewSettings(), DIALOG_COPPER_ZONE_BASE::m_DoNotShowNetNameFilter, m_NetFiltering, m_netNameShowFilter, m_NetSortingByPadCount, m_Parent, DIALOG_COPPER_ZONE_BASE::m_showAllNetsOpt, DIALOG_COPPER_ZONE_BASE::m_ShowNetNameFilter, and DIALOG_COPPER_ZONE_BASE::m_sortByPadsOpt.

◆ OnPaint()

void DIALOG_SHIM::OnPaint ( wxPaintEvent &  event)
inherited

Definition at line 302 of file dialog_shim.cpp.

303 {
304  if( m_firstPaintEvent )
305  {
307 
308  selectAllInTextCtrls( GetChildren() );
309 
311  m_initialFocusTarget->SetFocus();
312  else
313  SetFocus(); // Focus the dialog itself
314 
315  m_firstPaintEvent = false;
316  }
317 
318  event.Skip();
319 }
wxWindow * m_initialFocusTarget
Definition: dialog_shim.h:204
bool m_firstPaintEvent
Definition: dialog_shim.h:203
void FixupCancelButtonCmdKeyCollision(wxWindow *aWindow)
Definition: gtk/ui.cpp:38
static void selectAllInTextCtrls(wxWindowList &children)

References KIPLATFORM::UI::FixupCancelButtonCmdKeyCollision(), DIALOG_SHIM::m_firstPaintEvent, DIALOG_SHIM::m_initialFocusTarget, and selectAllInTextCtrls().

Referenced by DIALOG_SHIM::DIALOG_SHIM().

◆ OnRunFiltersButtonClick()

void DIALOG_COPPER_ZONE::OnRunFiltersButtonClick ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 542 of file dialog_copper_zones.cpp.

543 {
544  m_NetFiltering = true;
545  m_showAllNetsOpt->SetValue( false );
546 
548 }

References buildAvailableListOfNets(), m_NetFiltering, and DIALOG_COPPER_ZONE_BASE::m_showAllNetsOpt.

◆ OnStyleSelection()

void DIALOG_COPPER_ZONE::OnStyleSelection ( wxCommandEvent &  event)
overrideprivatevirtual

◆ OnUpdateUI()

void DIALOG_COPPER_ZONE::OnUpdateUI ( wxUpdateUIEvent &  )
overrideprivatevirtual

Reimplemented from DIALOG_COPPER_ZONE_BASE.

Definition at line 275 of file dialog_copper_zones.cpp.

276 {
277  if( m_ListNetNameSelection->GetSelection() < 0 )
278  m_ListNetNameSelection->SetSelection( 0 );
279 
280  bool noNetSelected = m_ListNetNameSelection->GetSelection() == 0;
281  bool enableSize = !noNetSelected && ( m_cbRemoveIslands->GetSelection() == 2 );
282 
283  m_bNoNetWarning->Show( noNetSelected );
284 
285  // Zones with no net never have islands removed
286  m_cbRemoveIslands->Enable( !noNetSelected );
287  m_islandThresholdLabel->Enable( enableSize );
288  m_islandThresholdUnits->Enable( enableSize );
289  m_tcIslandThreshold->Enable( enableSize );
290 
291  if( m_cornerSmoothingType != m_cornerSmoothingChoice->GetSelection() )
292  {
294 
296  m_cornerRadiusLabel->SetLabel( _( "Chamfer distance:" ) );
297  else
298  m_cornerRadiusLabel->SetLabel( _( "Fillet radius:" ) );
299  }
300 
302 }
#define _(s)
Definition: 3d_actions.cpp:33

References _, DIALOG_COPPER_ZONE_BASE::m_bNoNetWarning, DIALOG_COPPER_ZONE_BASE::m_cbRemoveIslands, DIALOG_COPPER_ZONE_BASE::m_cornerRadiusCtrl, DIALOG_COPPER_ZONE_BASE::m_cornerRadiusLabel, DIALOG_COPPER_ZONE_BASE::m_cornerSmoothingChoice, m_cornerSmoothingType, DIALOG_COPPER_ZONE_BASE::m_islandThresholdLabel, DIALOG_COPPER_ZONE_BASE::m_islandThresholdUnits, DIALOG_COPPER_ZONE_BASE::m_ListNetNameSelection, DIALOG_COPPER_ZONE_BASE::m_tcIslandThreshold, ZONE_SETTINGS::SMOOTHING_CHAMFER, and ZONE_SETTINGS::SMOOTHING_NONE.

◆ Prj()

PROJECT & KIWAY_HOLDER::Prj ( ) const
inherited

Function Prj returns a reference to the PROJECT "associated with" this KIWAY.

Definition at line 35 of file kiway_holder.cpp.

36 {
37  return Kiway().Prj();
38 }
KIWAY & Kiway() const
Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in...
Definition: kiway_holder.h:56
VTBL_ENTRY PROJECT & Prj() const
Function Prj returns the PROJECT associated with this KIWAY.
Definition: kiway.cpp:172

References KIWAY_HOLDER::Kiway(), and KIWAY::Prj().

Referenced by PCB_BASE_EDIT_FRAME::AddLibrary(), LIB_MANAGER::addLibrary(), SCH_EDIT_FRAME::AppendSchematic(), PCB_EDIT_FRAME::ArchiveModulesOnBoard(), DIALOG_SYMBOL_REMAP::backupProject(), CVPCB_MAINFRAME::buildEquivalenceList(), CVPCB_MAINFRAME::BuildLIBRARY_LISTBOX(), DIALOG_FOOTPRINT_FP_EDITOR::Cfg3DPath(), DIALOG_FOOTPRINT_BOARD_EDITOR::Cfg3DPath(), DIALOG_GEN_FOOTPRINT_POSITION::CreateGerberFiles(), PCB_BASE_EDIT_FRAME::CreateNewLibrary(), DIALOG_PLOT_SCHEMATIC::createPlotFileName(), DIALOG_SYMBOL_REMAP::createProjectSymbolLibTable(), SCH_EDIT_FRAME::CreateScreens(), FOOTPRINT_EDIT_FRAME::DeleteModuleFromLibrary(), DIALOG_BOARD_SETUP::DIALOG_BOARD_SETUP(), DIALOG_BOARD_STATISTICS::DIALOG_BOARD_STATISTICS(), DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), DIALOG_CHOOSE_FOOTPRINT::DIALOG_CHOOSE_FOOTPRINT(), DIALOG_CONFIG_EQUFILES::DIALOG_CONFIG_EQUFILES(), DIALOG_FOOTPRINT_BOARD_EDITOR::DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::DIALOG_FOOTPRINT_FP_EDITOR(), DIALOG_PAGES_SETTINGS::DIALOG_PAGES_SETTINGS(), DIALOG_SCHEMATIC_SETUP::DIALOG_SCHEMATIC_SETUP(), DIALOG_SYMBOL_REMAP::DIALOG_SYMBOL_REMAP(), LIB_VIEW_FRAME::DisplayLibInfos(), CVPCB_MAINFRAME::DisplayStatus(), PL_DRAW_PANEL_GAL::DisplayWorksheet(), PCB_EDIT_FRAME::doAutoSave(), FIELDS_GRID_TRICKS::doPopupSelection(), FIELDS_EDITOR_GRID_TRICKS::doPopupSelection(), KICAD_MANAGER_CONTROL::Execute(), PCB_EDIT_FRAME::Export_IDF3(), DIALOG_EXPORT_SVG::ExportSVGFile(), LIB_CONTROL::ExportSymbolAsSVG(), LIB_CONTROL::ExportView(), PCB_EDIT_FRAME::ExportVRML_File(), BACK_ANNOTATE::FetchNetlistFromPCB(), PCB_EDIT_FRAME::Files_io_from_id(), PCB_EDIT_FRAME::GenD356File(), DIALOG_GENDRILL::GenDrillAndMapFiles(), FOOTPRINT_VIEWER_FRAME::getCurFootprintName(), LIB_EDIT_FRAME::GetCurLib(), FOOTPRINT_VIEWER_FRAME::getCurNickname(), SCH_BASE_FRAME::GetLibPart(), DIALOG_SYMBOL_REMAP::getLibsNotInGlobalSymbolLibTable(), DISPLAY_FOOTPRINTS_FRAME::GetModule(), KICAD_MANAGER_FRAME::GetProjectFileName(), LIB_VIEW_FRAME::GetSelectedSymbol(), FP_THREAD_IFACE::GetTable(), PCB_EDIT_FRAME::importFile(), SCH_EDIT_FRAME::importFile(), SCH_EDITOR_CONTROL::ImportFPAssignments(), DIALOG_CONFIG_EQUFILES::Init(), FOOTPRINT_EDIT_FRAME::initLibraryTree(), SCH_EDIT_FRAME::KiwayMailIn(), LIB_EDIT_FRAME::KiwayMailIn(), EDA_DRAW_FRAME::LibraryFileBrowser(), LIB_EDIT_FRAME::LoadComponentFromCurrentLib(), CVPCB_MAINFRAME::LoadFootprintFiles(), DIALOG_SPICE_MODEL::loadLibrary(), LIB_EDIT_FRAME::LoadOneSymbol(), KICAD_MANAGER_FRAME::LoadProject(), SCH_EDIT_FRAME::LoadProject(), SCH_EDIT_FRAME::LoadProjectSettings(), PCB_EDIT_FRAME::LoadProjectSettings(), DRC::LoadRules(), SCH_EDIT_FRAME::LoadSheetFromFile(), DIALOG_FOOTPRINT_FP_EDITOR::On3DModelCellChanged(), DIALOG_FOOTPRINT_BOARD_EDITOR::On3DModelCellChanged(), FOOTPRINT_VIEWER_FRAME::OnActivate(), DIALOG_FOOTPRINT_FP_EDITOR::OnAdd3DModel(), DIALOG_FOOTPRINT_BOARD_EDITOR::OnAdd3DModel(), KICAD_MANAGER_FRAME::OnBrowseInFileExplorer(), TEXT_BUTTON_URL::OnButtonClick(), TEXT_BUTTON_FILE_BROWSER::OnButtonClick(), DIALOG_EDIT_COMPONENTS_LIBID::onClickOrphansButton(), SCH_EDIT_FRAME::OnCloseWindow(), DIALOG_GENDRILL::OnGenReportFile(), SCH_EDIT_FRAME::OnImportProject(), DIALOG_CHOOSE_COMPONENT::OnInitDialog(), DIALOG_CONFIG_EQUFILES::OnOkClick(), SCH_EDIT_FRAME::OnOpenCvpcb(), KICAD_MANAGER_FRAME::OnOpenFileInTextEditor(), DIALOG_NETLIST::OnOpenNetlistClick(), SCH_EDIT_FRAME::OnOpenPcbnew(), DIALOG_EXPORT_SVG::OnOutputDirectoryBrowseClicked(), DIALOG_PLOT::OnOutputDirectoryBrowseClicked(), DIALOG_PLOT_SCHEMATIC::OnOutputDirectoryBrowseClicked(), DIALOG_GEN_FOOTPRINT_POSITION::OnOutputDirectoryBrowseClicked(), DIALOG_GENDRILL::OnOutputDirectoryBrowseClicked(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), DIALOG_BOM::OnRunGenerator(), FOOTPRINT_EDIT_FRAME::OnSaveFootprintAsPng(), DIALOG_ERC::OnSaveReport(), DIALOG_DRC::OnSaveReport(), PROPERTIES_FRAME::onScintillaCharAdded(), DIALOG_LABEL_EDITOR::onScintillaCharAdded(), DIALOG_SCH_EDIT_ONE_FIELD::onScintillaCharAdded(), DIALOG_SPICE_MODEL::onSelectLibrary(), LIB_VIEW_FRAME::OnSelectSymbol(), KICAD_MANAGER_FRAME::OnUnarchiveFiles(), SCH_EDIT_FRAME::OnUpdatePCB(), SCH_EDIT_FRAME::OpenProjectFiles(), PCB_EDIT_FRAME::OpenProjectFiles(), PANEL_PREV_3D::PANEL_PREV_3D(), SCH_EDITOR_CONTROL::Paste(), FOOTPRINT_EDITOR_TOOLS::PasteFootprint(), PCB_BASE_EDIT_FRAME::PCB_BASE_EDIT_FRAME(), DIALOG_PLOT::Plot(), DIALOG_PLOT_SCHEMATIC::Plot_1_Page_HPGL(), DIALOG_PLOT_SCHEMATIC::PlotOneSheetDXF(), DIALOG_CHOOSE_COMPONENT::PopulateFootprintSelector(), SCH_EDITOR_CONTROL::Print(), SCH_EDIT_FRAME::PrintPage(), EDA_DRAW_FRAME::PrintWorkSheet(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), PCB_EDIT_FRAME::RecreateCmpFileFromBoard(), FOOTPRINT_VIEWER_FRAME::ReCreateFootprintList(), FOOTPRINT_VIEWER_FRAME::ReCreateLibraryList(), LIB_VIEW_FRAME::ReCreateListCmp(), LIB_VIEW_FRAME::ReCreateListLib(), SCH_EDIT_TOOL::RefreshSymbolFromLibrary(), EDA_3D_VIEWER::ReloadRequest(), DIALOG_SYMBOL_REMAP::remapSymbolToLibTable(), SCH_EDITOR_CONTROL::RescueLegacyProject(), SCH_EDITOR_CONTROL::RescueSymbolLibTableProject(), FOOTPRINT_EDIT_FRAME::restoreLastFootprint(), FOOTPRINT_EDIT_FRAME::retainLastFootprint(), DIALOG_EDIT_COMPONENTS_LIBID::revertChanges(), SCH_EDIT_FRAME::SaveEEFile(), FOOTPRINT_EDIT_FRAME::SaveFootprint(), FOOTPRINT_EDIT_FRAME::SaveFootprintAs(), FOOTPRINT_EDIT_FRAME::SaveFootprintInLibrary(), LIB_EDIT_FRAME::saveLibrary(), LIB_EDIT_FRAME::SaveOneSymbol(), LIB_EDIT_FRAME::savePartAs(), PCB_EDIT_FRAME::SavePcbFile(), SCH_EDIT_FRAME::SaveProject(), PCB_EDIT_FRAME::SaveProjectSettings(), DIALOG_BOARD_STATISTICS::saveReportClicked(), SCH_BASE_FRAME::saveSymbolLibTables(), FOOTPRINT_VIEWER_FRAME::SelectAndViewFootprint(), SCH_BASE_FRAME::SelectCompFromLibTree(), PCB_BASE_FRAME::SelectLibrary(), LIB_EDIT_FRAME::SelectLibraryFromList(), LIB_EDIT_FRAME::selectSymLibTable(), FOOTPRINT_VIEWER_FRAME::setCurFootprintName(), LIB_EDIT_FRAME::SetCurLib(), FOOTPRINT_VIEWER_FRAME::setCurNickname(), LIB_EDIT_FRAME::SetCurPart(), GERBVIEW_FRAME::SetPageSettings(), EE_INSPECTION_TOOL::ShowDatasheet(), DIALOG_CHOOSE_COMPONENT::ShowFootprintFor(), COMMON_CONTROL::ShowHelp(), LIB_VIEW_FRAME::ShowModal(), FOOTPRINT_VIEWER_FRAME::ShowModal(), SCH_EDIT_FRAME::ShowSchematicSetupDialog(), SIM_PLOT_FRAME::SIM_PLOT_FRAME(), LIB_MANAGER::symTable(), SYMBOL_TREE_SYNCHRONIZING_ADAPTER::Sync(), FOOTPRINT_EDIT_FRAME::SyncLibraryTree(), EDA_3D_VIEWER::takeScreenshot(), PANEL_SETUP_RULES::TransferDataFromWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), NETLIST_DIALOG::TransferDataFromWindow(), DIALOG_EDIT_COMPONENTS_LIBID::TransferDataFromWindow(), PANEL_SETUP_RULES::TransferDataToWindow(), DIALOG_FOOTPRINT_FP_EDITOR::TransferDataToWindow(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataToWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::UpdateFieldsFromLibrary(), DIALOG_PAGES_SETTINGS::UpdatePageLayoutExample(), FOOTPRINT_VIEWER_FRAME::UpdateTitle(), FOOTPRINT_EDIT_FRAME::updateTitle(), SCH_EDIT_FRAME::UpdateTitle(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::Validate(), SCH_EDIT_FRAME::WriteNetListFile(), DIALOG_FOOTPRINT_BOARD_EDITOR::~DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::~DIALOG_FOOTPRINT_FP_EDITOR(), and PCB_BASE_EDIT_FRAME::~PCB_BASE_EDIT_FRAME().

◆ ResetSize()

void DIALOG_SHIM::ResetSize ( )
protectedinherited

Clear the existing dialog size and position.

This will cause the dialog size to be clear so the next time the dialog is shown the sizers will layout the dialog accordingly. This useful when there are dialog windows that size changes due to layout dependency hidden controls.

Definition at line 244 of file dialog_shim.cpp.

245 {
246  const char* hash_key;
247 
248  if( m_hash_key.size() )
249  {
250  // a special case like EDA_LIST_DIALOG, which has multiple uses.
251  hash_key = m_hash_key.c_str();
252  }
253  else
254  {
255  hash_key = typeid(*this).name();
256  }
257 
258  RECT_MAP::iterator it = class_map.find( hash_key );
259 
260  if( it == class_map.end() )
261  return;
262 
263  EDA_RECT rect = it->second;
264  rect.SetSize( 0, 0 );
265  class_map[ hash_key ] = rect;
266 }
std::string m_hash_key
Definition: dialog_shim.h:198
static RECT_MAP class_map
void SetSize(const wxSize &size)
Definition: eda_rect.h:144
EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44

References class_map, DIALOG_SHIM::m_hash_key, and EDA_RECT::SetSize().

Referenced by DIALOG_EDIT_COMPONENT_IN_LIBRARY::DIALOG_EDIT_COMPONENT_IN_LIBRARY().

◆ SetInitialFocus()

void DIALOG_SHIM::SetInitialFocus ( wxWindow *  aWindow)
inlineinherited

Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown.

Definition at line 114 of file dialog_shim.h.

115  {
116  m_initialFocusTarget = aWindow;
117  }
wxWindow * m_initialFocusTarget
Definition: dialog_shim.h:204

References DIALOG_SHIM::m_initialFocusTarget.

Referenced by DIALOG_BOM::DIALOG_BOM(), DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), DIALOG_CHOOSE_FOOTPRINT::DIALOG_CHOOSE_FOOTPRINT(), DIALOG_CONFIGURE_PATHS::DIALOG_CONFIGURE_PATHS(), DIALOG_EDIT_LINE_STYLE::DIALOG_EDIT_LINE_STYLE(), DIALOG_EDIT_SHEET_PIN::DIALOG_EDIT_SHEET_PIN(), DIALOG_FIELDS_EDITOR_GLOBAL::DIALOG_FIELDS_EDITOR_GLOBAL(), DIALOG_FIND::DIALOG_FIND(), DIALOG_FOOTPRINT_BOARD_EDITOR::DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::DIALOG_FOOTPRINT_FP_EDITOR(), DIALOG_FP_PLUGIN_OPTIONS::DIALOG_FP_PLUGIN_OPTIONS(), DIALOG_GRAPHIC_ITEM_PROPERTIES::DIALOG_GRAPHIC_ITEM_PROPERTIES(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_IMPORT_GFX::DIALOG_IMPORT_GFX(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_LIB_EDIT_DRAW_ITEM::DIALOG_LIB_EDIT_DRAW_ITEM(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), DIALOG_LIB_EDIT_TEXT::DIALOG_LIB_EDIT_TEXT(), DIALOG_PAD_PRIMITIVES_PROPERTIES::DIALOG_PAD_PRIMITIVES_PROPERTIES(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_SCH_FIND::DIALOG_SCH_FIND(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), DIALOG_EDIT_ONE_FIELD::init(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchAllClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchIDClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchRefClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchSelectedClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchValueClicked(), PANEL_FP_LIB_TABLE::PANEL_FP_LIB_TABLE(), PANEL_SYM_LIB_TABLE::PANEL_SYM_LIB_TABLE(), FOOTPRINT_EDIT_FRAME::SaveFootprintAs(), LIB_EDIT_FRAME::savePartAs(), DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataToWindow(), DIALOG_KEEPOUT_AREA_PROPERTIES::TransferDataToWindow(), and TransferDataToWindow().

◆ SetKiway()

void KIWAY_HOLDER::SetKiway ( wxWindow *  aDest,
KIWAY aKiway 
)
inherited

Function SetKiway.

Parameters
aDestis the recipient of aKiway pointer. It is only used for debugging, since "this" is not a wxWindow*. "this" is a KIWAY_HOLDER mix-in.
aKiwayis often from a parent window, or from KIFACE::CreateWindow().

Definition at line 42 of file kiway_holder.cpp.

43 {
44 #if defined(DEBUG)
45  // offer a trap point for debugging most any window
46  wxASSERT( aDest );
47  if( !strcmp( typeid(aDest).name(), "DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB" ) )
48  {
49  int breakhere=1;
50  (void) breakhere;
51  }
52 #endif
53 
54  (void) aDest;
55 
56  m_kiway = aKiway;
57 }
KIWAY * m_kiway
Definition: kiway_holder.h:81
const char * name
Definition: DXF_plotter.cpp:60

References KIWAY_HOLDER::m_kiway, and name.

Referenced by BM2CMP_FRAME::BM2CMP_FRAME(), PCB::IFACE::CreateWindow(), InvokePcbLibTableEditor(), PCB_CALCULATOR_FRAME::PCB_CALCULATOR_FRAME(), and SIM_PLOT_FRAME::SIM_PLOT_FRAME().

◆ SetSizeInDU()

void DIALOG_SHIM::SetSizeInDU ( int  x,
int  y 
)
protectedinherited

Set the dialog to the given dimensions in "dialog units".

These are units equivalent to 4* the average character width and 8* the average character height, allowing a dialog to be sized in a way that scales it with the system font.

Definition at line 158 of file dialog_shim.cpp.

159 {
160  wxSize sz( x, y );
161  SetSize( ConvertDialogToPixels( sz ) );
162 }

Referenced by DIALOG_RESCUE_EACH::DIALOG_RESCUE_EACH(), HTML_MESSAGE_BOX::HTML_MESSAGE_BOX(), and HTML_MESSAGE_BOX::SetDialogSizeInDU().

◆ Show()

bool DIALOG_SHIM::Show ( bool  show)
overrideinherited

Definition at line 185 of file dialog_shim.cpp.

186 {
187  bool ret;
188  const char* hash_key;
189 
190  if( m_hash_key.size() )
191  {
192  // a special case like EDA_LIST_DIALOG, which has multiple uses.
193  hash_key = m_hash_key.c_str();
194  }
195  else
196  {
197  hash_key = typeid(*this).name();
198  }
199 
200  // Show or hide the window. If hiding, save current position and size.
201  // If showing, use previous position and size.
202  if( show )
203  {
204 #ifndef __WINDOWS__
205  wxDialog::Raise(); // Needed on OS X and some other window managers (i.e. Unity)
206 #endif
207  ret = wxDialog::Show( show );
208 
209  // classname is key, returns a zeroed out default EDA_RECT if none existed before.
210  EDA_RECT savedDialogRect = class_map[ hash_key ];
211 
212  if( savedDialogRect.GetSize().x != 0 && savedDialogRect.GetSize().y != 0 )
213  {
214  SetSize( savedDialogRect.GetPosition().x,
215  savedDialogRect.GetPosition().y,
216  std::max( wxDialog::GetSize().x, savedDialogRect.GetSize().x ),
217  std::max( wxDialog::GetSize().y, savedDialogRect.GetSize().y ),
218  0 );
219  }
220 
221  // Be sure that the dialog appears in a visible area
222  // (the dialog position might have been stored at the time when it was
223  // shown on another display)
224  if( wxDisplay::GetFromWindow( this ) == wxNOT_FOUND )
225  Centre();
226  }
227  else
228  {
229  // Save the dialog's position & size before hiding, using classname as key
230  class_map[ hash_key ] = EDA_RECT( wxDialog::GetPosition(), wxDialog::GetSize() );
231 
232 #ifdef __WXMAC__
233  if ( m_eventLoop )
234  m_eventLoop->Exit( GetReturnCode() ); // Needed for APP-MODAL dlgs on OSX
235 #endif
236 
237  ret = wxDialog::Show( show );
238  }
239 
240  return ret;
241 }
std::string m_hash_key
Definition: dialog_shim.h:198
static RECT_MAP class_map
const wxPoint GetPosition() const
Definition: eda_rect.h:115
EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44
const wxSize GetSize() const
Definition: eda_rect.h:103

References class_map, EDA_RECT::GetPosition(), EDA_RECT::GetSize(), DIALOG_SHIM::m_hash_key, wxPoint::x, and wxPoint::y.

Referenced by DIALOG_SHIM::EndQuasiModal(), InvokeDialogERC(), SCH_EDIT_FRAME::OnAnnotate(), DIALOG_DRC::OnDRCItemDClick(), DIALOG_ERC::OnERCItemDClick(), DIALOG_CLEANUP_TRACKS_AND_VIAS::OnLeftDClickItem(), DIALOG_CLEANUP_GRAPHICS::OnLeftDClickItem(), POSITION_RELATIVE_TOOL::PositionRelative(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), DRC::ShowDRCDialog(), SCH_EDIT_FRAME::ShowFindReplaceDialog(), DIALOG_SHIM::ShowQuasiModal(), DIALOG_POSITION_RELATIVE::UpdateAnchor(), and SCH_EDIT_FRAME::UpdateHierarchyNavigator().

◆ ShowQuasiModal()

int DIALOG_SHIM::ShowQuasiModal ( )
inherited

Definition at line 345 of file dialog_shim.cpp.

346 {
347  // This is an exception safe way to zero a pointer before returning.
348  // Yes, even though DismissModal() clears this first normally, this is
349  // here in case there's an exception before the dialog is dismissed.
350  struct NULLER
351  {
352  void*& m_what;
353  NULLER( void*& aPtr ) : m_what( aPtr ) {}
354  ~NULLER() { m_what = 0; } // indeed, set it to NULL on destruction
355  } clear_this( (void*&) m_qmodal_loop );
356 
357  // release the mouse if it's currently captured as the window having it
358  // will be disabled when this dialog is shown -- but will still keep the
359  // capture making it impossible to do anything in the modal dialog itself
360  wxWindow* win = wxWindow::GetCapture();
361  if( win )
362  win->ReleaseMouse();
363 
364  // Get the optimal parent
365  wxWindow* parent = GetParentForModalDialog( GetParent(), GetWindowStyle() );
366 
367  // Show the optimal parent
368  DBG( if( parent ) printf( "%s: optimal parent: %s\n", __func__, typeid(*parent).name() );)
369 
370  wxASSERT_MSG( !m_qmodal_parent_disabler,
371  wxT( "Caller using ShowQuasiModal() twice on same window?" ) );
372 
373  // quasi-modal: disable only my "optimal" parent
375 
376 
377  // Apple in its infinite wisdom will raise a disabled window before even passing
378  // us the event, so we have no way to stop it. Instead, we must set an order on
379  // the windows so that the quasi-modal will be pushed in front of the disabled
380  // window when it is raised.
382 
383  Show( true );
384 
385  m_qmodal_showing = true;
386 
387  WX_EVENT_LOOP event_loop;
388 
389  m_qmodal_loop = &event_loop;
390 
391  event_loop.Run();
392 
393  m_qmodal_showing = false;
394 
395  return GetReturnCode();
396 }
bool m_qmodal_showing
Definition: dialog_shim.h:208
#define WX_EVENT_LOOP
Definition: kiway_player.h:41
WX_EVENT_LOOP * m_qmodal_loop
Definition: dialog_shim.h:206
bool Show(bool show) override
WDO_ENABLE_DISABLE * m_qmodal_parent_disabler
Definition: dialog_shim.h:209
Toggle a window's "enable" status to disabled, then enabled on destruction.
Definition: dialog_shim.cpp:40
#define DBG(x)
Definition: fctsys.h:33
void ReparentQuasiModal(wxNonOwnedWindow *aWindow)
Move a window's parent to be the top-level window and force the window to be on top.
Definition: gtk/ui.cpp:32

References DBG, DIALOG_SHIM::m_qmodal_loop, DIALOG_SHIM::m_qmodal_parent_disabler, DIALOG_SHIM::m_qmodal_showing, KIPLATFORM::UI::ReparentQuasiModal(), DIALOG_SHIM::Show(), and WX_EVENT_LOOP.

Referenced by LIB_EDIT_TOOL::editFieldProperties(), SCH_EDITOR_CONTROL::EditSymbolFields(), LIB_EDIT_TOOL::editSymbolProperties(), GLOBAL_EDIT_TOOL::EditTracksAndVias(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), PCB_EDIT_FRAME::InstallExchangeModuleFrame(), PCB_BASE_FRAME::InstallPadOptionsFrame(), InvokeDialogEditComponentsLibId(), InvokeDialogRescueEach(), InvokeDialogUpdateFields(), LIB_VIEW_FRAME::OnSelectSymbol(), SCH_EDIT_FRAME::OpenProjectFiles(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), SCH_EDITOR_CONTROL::RemapSymbols(), SCH_BASE_FRAME::SelectCompFromLibTree(), PCB_BASE_FRAME::SelectFootprintFromLibTree(), PCB_EDIT_FRAME::ShowBoardSetupDialog(), and SCH_EDIT_FRAME::ShowSchematicSetupDialog().

◆ TransferDataFromWindow()

bool DIALOG_COPPER_ZONE::TransferDataFromWindow ( )
overrideprivate

Definition at line 313 of file dialog_copper_zones.cpp.

314 {
316 
317  if( m_GridStyleCtrl->GetSelection() > 0 )
319  else
321 
322  if( !AcceptOptions() )
323  return false;
324 
325  m_settings.m_HatchFillTypeOrientation = m_gridStyleRotation.GetValue()/10.0; // value is returned in deci-degree
330 
331  *m_ptr = m_settings;
332  return true;
333 }
static wxString m_netNameShowFilter
int m_HatchFillTypeSmoothingLevel
Grid pattern smoothing type, similar to corner smoothing type 0 = no smoothing, 1 = fillet,...
Definition: zone_settings.h:88
double m_HatchFillTypeOrientation
Grid style shape: orientation of grid lines in degrees.
Definition: zone_settings.h:87
int m_HatchFillTypeGap
Grid style shape: clearance between lines (0 -> solid shape)
Definition: zone_settings.h:86
bool AcceptOptions(bool aUseExportableSetupOnly=false)
wxSpinCtrlDouble * m_spinCtrlSmoothValue
ZONE_FILL_MODE m_FillMode
Definition: zone_settings.h:79
UNIT_BINDER m_gridStyleThickness
double m_HatchFillTypeSmoothingValue
Grid pattern chamfer distance/fillet value.
Definition: zone_settings.h:90
virtual long long int GetValue()
Function GetValue Returns the current value in Internal Units.
int m_HatchFillTypeThickness
Grid style shape: thickness of lines (if 0 -> solid shape)
Definition: zone_settings.h:85

References AcceptOptions(), UNIT_BINDER::GetValue(), HATCH_PATTERN, ZONE_SETTINGS::m_FillMode, DIALOG_COPPER_ZONE_BASE::m_GridStyleCtrl, m_gridStyleGap, m_gridStyleRotation, m_gridStyleThickness, ZONE_SETTINGS::m_HatchFillTypeGap, ZONE_SETTINGS::m_HatchFillTypeOrientation, ZONE_SETTINGS::m_HatchFillTypeSmoothingLevel, ZONE_SETTINGS::m_HatchFillTypeSmoothingValue, ZONE_SETTINGS::m_HatchFillTypeThickness, m_netNameShowFilter, m_ptr, m_settings, DIALOG_COPPER_ZONE_BASE::m_ShowNetNameFilter, DIALOG_COPPER_ZONE_BASE::m_spinCtrlSmoothLevel, DIALOG_COPPER_ZONE_BASE::m_spinCtrlSmoothValue, and POLYGONS.

◆ TransferDataToWindow()

bool DIALOG_COPPER_ZONE::TransferDataToWindow ( )
overrideprivate

Definition at line 151 of file dialog_copper_zones.cpp.

152 {
157 
159  {
161  m_OutlineAppearanceCtrl->SetSelection( 0 );
162  break;
164  m_OutlineAppearanceCtrl->SetSelection( 1 );
165  break;
167  m_OutlineAppearanceCtrl->SetSelection( 2 );
168  break;
169  }
170 
173 
174  switch( m_settings.GetPadConnection() )
175  {
176  default:
178  m_PadInZoneOpt->SetSelection( 1 );
179  break;
181  m_PadInZoneOpt->SetSelection( 2 );
182  break;
184  m_PadInZoneOpt->SetSelection( 3 );
185  break;
187  m_PadInZoneOpt->SetSelection( 0 );
188  break;
189  }
190 
191  // Do not enable/disable antipad clearance and spoke width. They might be needed if
192  // a module or pad overrides the zone to specify a thermal connection.
195 
197  m_islandThreshold.SetDoubleValue( static_cast<double>( m_settings.GetMinIslandArea() ) );
198 
199  m_cbRemoveIslands->SetSelection( static_cast<int>( m_settings.GetIslandRemovalMode() ) );
200 
202 
203  m_tcIslandThreshold->Enable( val );
204  m_islandThresholdLabel->Enable( val );
205  m_islandThresholdUnits->Enable( val );
206 
207  wxString netNameDoNotShowFilter = wxT( "Net-*" );
208  m_NetFiltering = false;
209  m_NetSortingByPadCount = true;
210 
211  auto cfg = m_Parent->GetPcbNewSettings();
212 
213  int opt = cfg->m_Zones.net_sort_mode;
214  m_NetFiltering = opt >= 2;
215  m_NetSortingByPadCount = opt % 2;
216 
217  netNameDoNotShowFilter = cfg->m_Zones.net_filter;
218 
220  m_DoNotShowNetNameFilter->SetValue( netNameDoNotShowFilter );
221  m_showAllNetsOpt->SetValue( !m_NetFiltering );
223 
224  // Build list of nets:
226 
228 
229  switch( m_settings.m_FillMode )
230  {
232  m_GridStyleCtrl->SetSelection( 1 ); break;
233  default:
234  m_GridStyleCtrl->SetSelection( 0 ); break;
235  }
236 
239 
240  // Gives a reasonable value to grid style parameters, if currently there are no defined
241  // parameters for grid pattern thickness and gap (if the value is 0)
242  // the grid pattern thickness default value is (arbitrary) m_ZoneMinThickness * 4
243  // or 1mm
244  // the grid pattern gap default value is (arbitrary) m_ZoneMinThickness * 6
245  // or 1.5 mm
246  int bestvalue = m_settings.m_HatchFillTypeThickness;
247 
248  if( bestvalue <= 0 ) // No defined value for m_HatchFillTypeThickness
249  bestvalue = std::max( m_settings.m_ZoneMinThickness * 4, Millimeter2iu( 1.0 ) );
250 
252 
253  bestvalue = m_settings.m_HatchFillTypeGap;
254 
255  if( bestvalue <= 0 ) // No defined value for m_HatchFillTypeGap
256  bestvalue = std::max( m_settings.m_ZoneMinThickness * 6, Millimeter2iu( 1.5 ) );
257 
258  m_gridStyleGap.SetValue( std::max( bestvalue, m_settings.m_ZoneMinThickness ) );
259 
262 
263  m_tcZoneName->SetValue( m_settings.m_Name );
264 
265  // Enable/Disable some widgets
266  wxCommandEvent event;
267  OnStyleSelection( event );
268 
269  Fit();
270 
271  return true;
272 }
static wxString m_netNameShowFilter
long long int GetMinIslandArea() const
long m_ThermalReliefCopperBridge
thickness of the copper bridge in thermal reliefs
int m_HatchFillTypeSmoothingLevel
Grid pattern smoothing type, similar to corner smoothing type 0 = no smoothing, 1 = fillet,...
Definition: zone_settings.h:88
double m_HatchFillTypeOrientation
Grid style shape: orientation of grid lines in degrees.
Definition: zone_settings.h:87
int GetCornerSmoothingType() const
int m_HatchFillTypeGap
Grid style shape: clearance between lines (0 -> solid shape)
Definition: zone_settings.h:86
void SetDataType(EDA_DATA_TYPE aDataType)
Used to override the datatype of the displayed property (default is DISTANCE)
Definition: unit_binder.cpp:87
wxString m_Name
Unique name for the current zone (can be blank)
Definition: zone_settings.h:95
const ISLAND_REMOVAL_MODE GetIslandRemovalMode() const
PCBNEW_SETTINGS * GetPcbNewSettings()
ZONE_CONNECTION GetPadConnection() const
void OnStyleSelection(wxCommandEvent &event) override
void SetInitialFocus(wxWindow *aWindow)
Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown.
Definition: dialog_shim.h:114
unsigned int GetCornerRadius() const
pads are covered by copper
PCB_BASE_FRAME * m_Parent
wxSpinCtrlDouble * m_spinCtrlSmoothValue
int m_ZonePriority
Priority (0 ... N) of the zone.
Definition: zone_settings.h:81
ZONE_HATCH_STYLE m_Zone_HatchingStyle
Option to show the zone area (outlines only, short hatches or full hatches.
int m_ZoneClearance
Minimal clearance value.
Definition: zone_settings.h:83
Thermal relief only for THT pads.
Use thermal relief for pads.
ZONE_FILL_MODE m_FillMode
Definition: zone_settings.h:79
UNIT_BINDER m_gridStyleThickness
virtual void SetValue(int aValue)
Function SetValue Sets new value (in Internal Units) for the text field, taking care of units convers...
double m_HatchFillTypeSmoothingValue
Grid pattern chamfer distance/fillet value.
Definition: zone_settings.h:90
Pads are not covered.
virtual void SetDoubleValue(double aValue)
Function SetDoubleValue Sets new value (in Internal Units) for the text field, taking care of units c...
int m_HatchFillTypeThickness
Grid style shape: thickness of lines (if 0 -> solid shape)
Definition: zone_settings.h:85
long m_ThermalReliefGap
thickness of the gap in thermal reliefs
int m_ZoneMinThickness
Min thickness value in filled areas.
Definition: zone_settings.h:84
virtual void SetUnits(EDA_UNITS aUnits, bool aUseMils=false)
Function SetUnits Normally not needed (as the UNIT_BINDER inherits from the parent frame),...
Definition: unit_binder.cpp:79

References AREA, buildAvailableListOfNets(), DEGREES, DIAGONAL_EDGE, DIAGONAL_FULL, FULL, ZONE_SETTINGS::GetCornerRadius(), ZONE_SETTINGS::GetCornerSmoothingType(), ZONE_SETTINGS::GetIslandRemovalMode(), ZONE_SETTINGS::GetMinIslandArea(), ZONE_SETTINGS::GetPadConnection(), PCB_BASE_FRAME::GetPcbNewSettings(), HATCH_PATTERN, m_antipadClearance, DIALOG_COPPER_ZONE_BASE::m_cbRemoveIslands, m_clearance, DIALOG_COPPER_ZONE_BASE::m_constrainOutline, m_cornerRadius, DIALOG_COPPER_ZONE_BASE::m_cornerSmoothingChoice, DIALOG_COPPER_ZONE_BASE::m_DoNotShowNetNameFilter, ZONE_SETTINGS::m_FillMode, DIALOG_COPPER_ZONE_BASE::m_GridStyleCtrl, m_gridStyleGap, m_gridStyleRotation, m_gridStyleThickness, ZONE_SETTINGS::m_HatchFillTypeGap, ZONE_SETTINGS::m_HatchFillTypeOrientation, ZONE_SETTINGS::m_HatchFillTypeSmoothingLevel, ZONE_SETTINGS::m_HatchFillTypeSmoothingValue, ZONE_SETTINGS::m_HatchFillTypeThickness, m_islandThreshold, DIALOG_COPPER_ZONE_BASE::m_islandThresholdLabel, DIALOG_COPPER_ZONE_BASE::m_islandThresholdUnits, DIALOG_COPPER_ZONE_BASE::m_ListNetNameSelection, m_minWidth, ZONE_SETTINGS::m_Name, m_NetFiltering, m_netNameShowFilter, m_NetSortingByPadCount, DIALOG_COPPER_ZONE_BASE::m_OutlineAppearanceCtrl, DIALOG_COPPER_ZONE_BASE::m_PadInZoneOpt, m_Parent, DIALOG_COPPER_ZONE_BASE::m_PriorityLevelCtrl, m_settings, DIALOG_COPPER_ZONE_BASE::m_showAllNetsOpt, DIALOG_COPPER_ZONE_BASE::m_ShowNetNameFilter, DIALOG_COPPER_ZONE_BASE::m_sortByPadsOpt, DIALOG_COPPER_ZONE_BASE::m_spinCtrlSmoothLevel, DIALOG_COPPER_ZONE_BASE::m_spinCtrlSmoothValue, m_spokeWidth, DIALOG_COPPER_ZONE_BASE::m_tcIslandThreshold, DIALOG_COPPER_ZONE_BASE::m_tcZoneName, ZONE_SETTINGS::m_ThermalReliefCopperBridge, ZONE_SETTINGS::m_ThermalReliefGap, ZONE_SETTINGS::m_Zone_45_Only, ZONE_SETTINGS::m_Zone_HatchingStyle, ZONE_SETTINGS::m_ZoneClearance, ZONE_SETTINGS::m_ZoneMinThickness, ZONE_SETTINGS::m_ZonePriority, PCBNEW_SETTINGS::m_Zones, PCBNEW_SETTINGS::ZONES::net_sort_mode, NO_HATCH, NONE, OnStyleSelection(), UNIT_BINDER::SetDataType(), UNIT_BINDER::SetDoubleValue(), DIALOG_SHIM::SetInitialFocus(), UNIT_BINDER::SetUnits(), UNIT_BINDER::SetValue(), THERMAL, and THT_THERMAL.

◆ VertPixelsFromDU()

int DIALOG_SHIM::VertPixelsFromDU ( int  y)
protectedinherited

Convert an integer number of dialog units to pixels, vertically.

See SetSizeInDU or wxDialog documentation for more information.

Definition at line 172 of file dialog_shim.cpp.

173 {
174  wxSize sz( 0, y );
175  return ConvertDialogToPixels( sz ).y;
176 }

Referenced by DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT().

Member Data Documentation

◆ m_antipadClearance

UNIT_BINDER DIALOG_COPPER_ZONE::m_antipadClearance
private

Definition at line 62 of file dialog_copper_zones.cpp.

Referenced by AcceptOptions(), and TransferDataToWindow().

◆ m_antipadCtrl

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_antipadCtrl
protectedinherited

◆ m_antipadLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_antipadLabel
protectedinherited

◆ m_antipadUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_antipadUnits
protectedinherited

◆ m_bitmapNoNetWarning

wxStaticBitmap* DIALOG_COPPER_ZONE_BASE::m_bitmapNoNetWarning
protectedinherited

◆ m_bNoNetWarning

wxBoxSizer* DIALOG_COPPER_ZONE_BASE::m_bNoNetWarning
protectedinherited

◆ m_buttonRunFilter

wxButton* DIALOG_COPPER_ZONE_BASE::m_buttonRunFilter
protectedinherited

◆ m_cbRemoveIslands

wxChoice* DIALOG_COPPER_ZONE_BASE::m_cbRemoveIslands
protectedinherited

◆ m_clearance

UNIT_BINDER DIALOG_COPPER_ZONE::m_clearance
private

Definition at line 60 of file dialog_copper_zones.cpp.

Referenced by AcceptOptions(), and TransferDataToWindow().

◆ m_clearanceCtrl

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_clearanceCtrl
protectedinherited

◆ m_clearanceLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_clearanceLabel
protectedinherited

◆ m_clearanceUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_clearanceUnits
protectedinherited

◆ m_connectionLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_connectionLabel
protectedinherited

◆ m_constrainOutline

wxCheckBox* DIALOG_COPPER_ZONE_BASE::m_constrainOutline
protectedinherited

◆ m_cornerRadius

UNIT_BINDER DIALOG_COPPER_ZONE::m_cornerRadius
private

Definition at line 59 of file dialog_copper_zones.cpp.

Referenced by AcceptOptions(), and TransferDataToWindow().

◆ m_cornerRadiusCtrl

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_cornerRadiusCtrl
protectedinherited

◆ m_cornerRadiusLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_cornerRadiusLabel
protectedinherited

◆ m_cornerRadiusUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_cornerRadiusUnits
protectedinherited

◆ m_cornerSmoothingChoice

wxChoice* DIALOG_COPPER_ZONE_BASE::m_cornerSmoothingChoice
protectedinherited

◆ m_cornerSmoothingType

int DIALOG_COPPER_ZONE::m_cornerSmoothingType
private

Definition at line 57 of file dialog_copper_zones.cpp.

Referenced by OnUpdateUI().

◆ m_DoNotShowNetNameFilter

◆ m_ExportSetupButton

wxButton* DIALOG_COPPER_ZONE_BASE::m_ExportSetupButton
protectedinherited

◆ m_firstPaintEvent

bool DIALOG_SHIM::m_firstPaintEvent
protectedinherited

Definition at line 203 of file dialog_shim.h.

Referenced by DIALOG_SHIM::OnPaint().

◆ m_GridStyleCtrl

◆ m_gridStyleGap

UNIT_BINDER DIALOG_COPPER_ZONE::m_gridStyleGap
private

◆ m_GridStyleGapUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_GridStyleGapUnits
protectedinherited

◆ m_gridStyleRotation

UNIT_BINDER DIALOG_COPPER_ZONE::m_gridStyleRotation
private

◆ m_gridStyleThickness

UNIT_BINDER DIALOG_COPPER_ZONE::m_gridStyleThickness
private

◆ m_GridStyleThicknessUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_GridStyleThicknessUnits
protectedinherited

◆ m_hash_key

◆ m_initialFocusTarget

wxWindow* DIALOG_SHIM::m_initialFocusTarget
protectedinherited

Definition at line 204 of file dialog_shim.h.

Referenced by DIALOG_SHIM::OnPaint(), and DIALOG_SHIM::SetInitialFocus().

◆ m_islandThreshold

UNIT_BINDER DIALOG_COPPER_ZONE::m_islandThreshold
private

Definition at line 68 of file dialog_copper_zones.cpp.

Referenced by AcceptOptions(), and TransferDataToWindow().

◆ m_islandThresholdLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_islandThresholdLabel
protectedinherited

◆ m_islandThresholdUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_islandThresholdUnits
protectedinherited

◆ m_layers

wxDataViewListCtrl* DIALOG_COPPER_ZONE_BASE::m_layers
protectedinherited

◆ m_ListNetNameSelection

wxListBox* DIALOG_COPPER_ZONE_BASE::m_ListNetNameSelection
protectedinherited

◆ m_MainBoxSizer

wxBoxSizer* DIALOG_COPPER_ZONE_BASE::m_MainBoxSizer
protectedinherited

◆ m_minWidth

UNIT_BINDER DIALOG_COPPER_ZONE::m_minWidth
private

Definition at line 61 of file dialog_copper_zones.cpp.

Referenced by AcceptOptions(), and TransferDataToWindow().

◆ m_minWidthCtrl

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_minWidthCtrl
protectedinherited

◆ m_minWidthLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_minWidthLabel
protectedinherited

◆ m_minWidthUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_minWidthUnits
protectedinherited

◆ m_NetFiltering

long DIALOG_COPPER_ZONE::m_NetFiltering
private

◆ m_netNameShowFilter

wxString DIALOG_COPPER_ZONE::m_netNameShowFilter
staticprivate

◆ m_NetSortingByPadCount

bool DIALOG_COPPER_ZONE::m_NetSortingByPadCount
private

◆ m_OutlineAppearanceCtrl

wxChoice* DIALOG_COPPER_ZONE_BASE::m_OutlineAppearanceCtrl
protectedinherited

◆ m_PadInZoneOpt

wxChoice* DIALOG_COPPER_ZONE_BASE::m_PadInZoneOpt
protectedinherited

◆ m_Parent

◆ m_parentFrame

EDA_BASE_FRAME* DIALOG_SHIM::m_parentFrame
protectedinherited

Definition at line 211 of file dialog_shim.h.

Referenced by DIALOG_SHIM::OnCharHook(), and DIALOG_DRC::OnDRCItemRClick().

◆ m_PriorityLevelCtrl

wxSpinCtrl* DIALOG_COPPER_ZONE_BASE::m_PriorityLevelCtrl
protectedinherited

◆ m_ptr

ZONE_SETTINGS* DIALOG_COPPER_ZONE::m_ptr
private

Definition at line 51 of file dialog_copper_zones.cpp.

Referenced by DIALOG_COPPER_ZONE(), and TransferDataFromWindow().

◆ m_qmodal_loop

WX_EVENT_LOOP* DIALOG_SHIM::m_qmodal_loop
protectedinherited

Definition at line 206 of file dialog_shim.h.

Referenced by DIALOG_SHIM::EndQuasiModal(), and DIALOG_SHIM::ShowQuasiModal().

◆ m_qmodal_parent_disabler

WDO_ENABLE_DISABLE* DIALOG_SHIM::m_qmodal_parent_disabler
protectedinherited

◆ m_qmodal_showing

bool DIALOG_SHIM::m_qmodal_showing
protectedinherited

Definition at line 208 of file dialog_shim.h.

Referenced by DIALOG_SHIM::IsQuasiModal(), and DIALOG_SHIM::ShowQuasiModal().

◆ m_sdbSizer

wxStdDialogButtonSizer* DIALOG_COPPER_ZONE_BASE::m_sdbSizer
protectedinherited

◆ m_sdbSizerCancel

wxButton* DIALOG_COPPER_ZONE_BASE::m_sdbSizerCancel
protectedinherited

◆ m_sdbSizerOK

wxButton* DIALOG_COPPER_ZONE_BASE::m_sdbSizerOK
protectedinherited

◆ m_settings

◆ m_settingsExported

bool DIALOG_COPPER_ZONE::m_settingsExported
private

◆ m_showAllNetsOpt

◆ m_ShowNetNameFilter

◆ m_sortByPadsOpt

wxCheckBox* DIALOG_COPPER_ZONE_BASE::m_sortByPadsOpt
protectedinherited

◆ m_spinCtrlSmoothLevel

wxSpinCtrl* DIALOG_COPPER_ZONE_BASE::m_spinCtrlSmoothLevel
protectedinherited

◆ m_spinCtrlSmoothValue

wxSpinCtrlDouble* DIALOG_COPPER_ZONE_BASE::m_spinCtrlSmoothValue
protectedinherited

◆ m_spokeWidth

UNIT_BINDER DIALOG_COPPER_ZONE::m_spokeWidth
private

Definition at line 63 of file dialog_copper_zones.cpp.

Referenced by AcceptOptions(), and TransferDataToWindow().

◆ m_spokeWidthCtrl

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_spokeWidthCtrl
protectedinherited

◆ m_spokeWidthLabel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_spokeWidthLabel
protectedinherited

◆ m_spokeWidthUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_spokeWidthUnits
protectedinherited

◆ m_staticline1

wxStaticLine* DIALOG_COPPER_ZONE_BASE::m_staticline1
protectedinherited

◆ m_staticText18

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticText18
protectedinherited

◆ m_staticText39

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticText39
protectedinherited

◆ m_staticText40

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticText40
protectedinherited

◆ m_staticTextDisplay

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextDisplay
protectedinherited

◆ m_staticTextGridFillType

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextGridFillType
protectedinherited

◆ m_staticTextGridGap

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextGridGap
protectedinherited

◆ m_staticTextGridSmoothingLevel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextGridSmoothingLevel
protectedinherited

◆ m_staticTextGridSmootingVal

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextGridSmootingVal
protectedinherited

◆ m_staticTextGrindOrient

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextGrindOrient
protectedinherited

◆ m_staticTextPriorityLevel

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextPriorityLevel
protectedinherited

◆ m_staticTextRotUnits

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextRotUnits
protectedinherited

◆ m_staticTextSmoothing

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextSmoothing
protectedinherited

◆ m_staticTextStyle

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextStyle
protectedinherited

◆ m_staticTextStyleThickness

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextStyleThickness
protectedinherited

◆ m_staticTextVFilter

wxStaticText* DIALOG_COPPER_ZONE_BASE::m_staticTextVFilter
protectedinherited

◆ m_tabOrder

◆ m_tcGridStyleGap

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_tcGridStyleGap
protectedinherited

◆ m_tcGridStyleOrientation

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_tcGridStyleOrientation
protectedinherited

◆ m_tcGridStyleThickness

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_tcGridStyleThickness
protectedinherited

◆ m_tcIslandThreshold

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_tcIslandThreshold
protectedinherited

◆ m_tcZoneName

wxTextCtrl* DIALOG_COPPER_ZONE_BASE::m_tcZoneName
protectedinherited

◆ m_units


The documentation for this class was generated from the following file: