KiCad PCB EDA Suite
DIALOG_BOARD_SETUP Class Reference

#include <dialog_board_setup.h>

Inheritance diagram for DIALOG_BOARD_SETUP:
PAGED_DIALOG DIALOG_SHIM KIWAY_HOLDER

Public Types

enum  HOLDER_TYPE { DIALOG, FRAME, PANEL }
 

Public Member Functions

 DIALOG_BOARD_SETUP (PCB_EDIT_FRAME *aFrame)
 
 ~DIALOG_BOARD_SETUP ()
 
wxTreebook * GetTreebook ()
 
void SetInitialPage (const wxString &aPage, const wxString &aParentPage=wxEmptyString)
 
void SetError (const wxString &aMessage, const wxString &aPageName, int aCtrlId, int aRow=-1, int aCol=-1)
 
void SetError (const wxString &aMessage, wxWindow *aPage, wxWindow *aCtrl, int aRow=-1, int aCol=-1)
 
void SetInitialFocus (wxWindow *aWindow)
 Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown. More...
 
int ShowQuasiModal ()
 
void EndQuasiModal (int retCode)
 
bool IsQuasiModal ()
 
bool Show (bool show) override
 
bool Enable (bool enable) override
 
void OnPaint (wxPaintEvent &event)
 
EDA_UNITS GetUserUnits () const
 
HOLDER_TYPE GetType ()
 
KIWAYKiway () const
 Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in. More...
 
PROJECTPrj () const
 Function Prj returns a reference to the PROJECT "associated with" this KIWAY. More...
 
void SetKiway (wxWindow *aDest, KIWAY *aKiway)
 Function SetKiway. More...
 

Static Public Member Functions

static bool IsCtrl (int aChar, const wxKeyEvent &e)
 
static bool IsShiftCtrl (int aChar, const wxKeyEvent &e)
 
static void FixOSXCancelButtonIssue (wxWindow *aWindow)
 

Protected Member Functions

void OnAuxiliaryAction (wxCommandEvent &event) override
 
void OnPageChange (wxBookCtrlEvent &event)
 
void finishInitialization ()
 
bool TransferDataToWindow () override
 
bool TransferDataFromWindow () override
 
void OnUpdateUI (wxUpdateUIEvent &event)
 
void FinishDialogSettings ()
 In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls. More...
 
void SetSizeInDU (int x, int y)
 Set the dialog to the given dimensions in "dialog units". More...
 
int HorizPixelsFromDU (int x)
 Convert an integer number of dialog units to pixels, horizontally. More...
 
int VertPixelsFromDU (int y)
 Convert an integer number of dialog units to pixels, vertically. More...
 
void ResetSize ()
 Clear the existing dialog size and position. More...
 

Protected Attributes

PCB_EDIT_FRAMEm_frame
 
PANEL_SETUP_FEATURE_CONSTRAINTSm_constraints
 
PANEL_SETUP_LAYERSm_layers
 
PANEL_SETUP_TEXT_AND_GRAPHICSm_textAndGraphics
 
PANEL_SETUP_NETCLASSESm_netclasses
 
PANEL_SETUP_RULESm_rules
 
PANEL_SETUP_TRACKS_AND_VIASm_tracksAndVias
 
PANEL_SETUP_MASK_AND_PASTEm_maskAndPaste
 
PANEL_SETUP_BOARD_STACKUPm_physicalStackup
 
PANEL_SETUP_SEVERITIESm_severities
 
PANEL_TEXT_VARIABLESm_textVars
 
std::vector< bool > m_macHack
 
wxTreebook * m_treebook
 
wxButton * m_auxiliaryButton
 
EDA_UNITS m_units
 
std::string m_hash_key
 
bool m_firstPaintEvent
 
wxWindow * m_initialFocusTarget
 
WX_EVENT_LOOPm_qmodal_loop
 
bool m_qmodal_showing
 
WDO_ENABLE_DISABLEm_qmodal_parent_disabler
 
EDA_BASE_FRAMEm_parentFrame
 
std::vector< wxWindow * > m_tabOrder
 

Private Attributes

int m_physicalStackupPage
 

Detailed Description

Definition at line 39 of file dialog_board_setup.h.

Member Enumeration Documentation

◆ HOLDER_TYPE

enum KIWAY_HOLDER::HOLDER_TYPE
inherited
Enumerator
DIALOG 
FRAME 
PANEL 

Definition at line 42 of file kiway_holder.h.

Constructor & Destructor Documentation

◆ DIALOG_BOARD_SETUP()

DIALOG_BOARD_SETUP::DIALOG_BOARD_SETUP ( PCB_EDIT_FRAME aFrame)

Definition at line 43 of file dialog_board_setup.cpp.

43  :
44  PAGED_DIALOG( aFrame, _( "Board Setup" ), _( "Import Settings from Another Board..." ) ),
45  m_frame( aFrame )
46 {
47  BOARD* board = aFrame->GetBoard();
49 
50  m_layers = new PANEL_SETUP_LAYERS( this, aFrame );
52  m_constraints = new PANEL_SETUP_FEATURE_CONSTRAINTS( this, aFrame );
53  m_rules = new PANEL_SETUP_RULES( this, aFrame );
55  m_maskAndPaste = new PANEL_SETUP_MASK_AND_PASTE( this, aFrame );
57 
59  bds.m_DRCSeverities );
60 
62  board->GetNetClassAssignmentCandidates(), false );
63 
65 
66  /*
67  * WARNING: If you change page names you MUST update calls to ShowBoardSetupDialog().
68  */
69 
70  m_treebook->AddPage( new wxPanel( this ), _( "Board Stackup" ) );
71  m_treebook->AddSubPage( m_layers, _( "Board Editor Layers" ) );
72  m_treebook->AddSubPage( m_physicalStackup, _( "Physical Stackup" ) );
73  // Change this value if m_physicalStackup is not the page 2 of m_treebook
74  m_physicalStackupPage = 2; // The page number (from 0) to select the m_physicalStackup panel
75 
76  m_treebook->AddPage( new wxPanel( this ), _( "Defaults" ) );
77  m_treebook->AddSubPage( m_textAndGraphics, _( "Text & Graphics" ) );
78  m_treebook->AddSubPage( m_tracksAndVias, _( "Tracks & Vias" ) );
79  m_treebook->AddSubPage( m_maskAndPaste, _( "Solder Mask/Paste" ) );
80 
81  m_treebook->AddPage( new wxPanel( this ), _( "Design Rules" ) );
82  m_treebook->AddSubPage( m_constraints, _( "Constraints" ) );
83  m_treebook->AddSubPage( m_rules, _( "Rules" ) );
84  m_treebook->AddSubPage( m_severities, _( "Violation Severity" ) );
85 
86  m_treebook->AddPage( new wxPanel( this ), _( "Project" ) );
87  m_treebook->AddSubPage( m_netclasses, _( "Net Classes" ) );
88  m_treebook->AddSubPage( m_textVars, _( "Text Variables" ) );
89 
90  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
91  m_macHack.push_back( true );
92 
93  // Connect Events
94  m_treebook->Connect( wxEVT_TREEBOOK_PAGE_CHANGED,
95  wxBookCtrlEventHandler( DIALOG_BOARD_SETUP::OnPageChange ), NULL, this );
96 
98 }
PANEL_SETUP_RULES * m_rules
std::map< int, int > m_DRCSeverities
PANEL_SETUP_NETCLASSES * m_netclasses
void FinishDialogSettings()
In all dialogs, we must call the same functions to fix minimal dlg size, the default position and per...
BOARD_DESIGN_SETTINGS & GetDesignSettings() const
Function GetDesignSettings.
Definition: class_board.h:551
PCB_EDIT_FRAME * m_frame
PANEL_SETUP_BOARD_STACKUP * m_physicalStackup
PANEL_SETUP_SEVERITIES * m_severities
#define NULL
PAGED_DIALOG(wxWindow *aParent, const wxString &aTitle, const wxString &aAuxiliaryAction=wxEmptyString)
PROJECT & Prj() const
Function Prj returns a reference to the PROJECT "associated with" this KIWAY.
wxTreebook * m_treebook
Definition: paged_dialog.h:65
NETCLASSES & GetNetClasses() const
PANEL_SETUP_TRACKS_AND_VIAS * m_tracksAndVias
BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:180
#define _(s)
Definition: 3d_actions.cpp:33
static std::vector< std::reference_wrapper< RC_ITEM > > GetItemsWithSeverities()
PANEL_SETUP_TEXT_AND_GRAPHICS * m_textAndGraphics
PANEL_SETUP_MASK_AND_PASTE * m_maskAndPaste
PANEL_TEXT_VARIABLES * m_textVars
BOARD * GetBoard() const
PANEL_SETUP_LAYERS * m_layers
std::vector< bool > m_macHack
void OnPageChange(wxBookCtrlEvent &event)
std::vector< wxString > GetNetClassAssignmentCandidates()
Function GetNetClassAssignmentCandidates Returns a list of name candidates for netclass assignment.
PANEL_SETUP_FEATURE_CONSTRAINTS * m_constraints
BOARD_DESIGN_SETTINGS contains design settings for a BOARD object.

References _, DIALOG_SHIM::FinishDialogSettings(), PCB_BASE_FRAME::GetBoard(), BOARD::GetDesignSettings(), DRC_ITEM::GetItemsWithSeverities(), BOARD::GetNetClassAssignmentCandidates(), BOARD_DESIGN_SETTINGS::GetNetClasses(), m_constraints, BOARD_DESIGN_SETTINGS::m_DRCSeverities, m_layers, m_macHack, m_maskAndPaste, m_netclasses, m_physicalStackup, m_physicalStackupPage, m_rules, m_severities, m_textAndGraphics, m_textVars, m_tracksAndVias, PAGED_DIALOG::m_treebook, NULL, OnPageChange(), and KIWAY_HOLDER::Prj().

◆ ~DIALOG_BOARD_SETUP()

DIALOG_BOARD_SETUP::~DIALOG_BOARD_SETUP ( )

Definition at line 101 of file dialog_board_setup.cpp.

102 {
103  m_treebook->Disconnect( wxEVT_TREEBOOK_PAGE_CHANGED,
104  wxBookCtrlEventHandler( DIALOG_BOARD_SETUP::OnPageChange ), NULL, this );
105 }
#define NULL
wxTreebook * m_treebook
Definition: paged_dialog.h:65
void OnPageChange(wxBookCtrlEvent &event)

References PAGED_DIALOG::m_treebook, NULL, and OnPageChange().

Member Function Documentation

◆ Enable()

bool DIALOG_SHIM::Enable ( bool  enable)
overrideinherited

Definition at line 267 of file dialog_shim.cpp.

268 {
269  // so we can do logging of this state change:
270 
271 #if 0 && defined(DEBUG)
272  const char* type_id = typeid( *this ).name();
273  printf( "DIALOG_SHIM %s: %s\n", type_id, enable ? "enabled" : "disabled" );
274  fflush(0); //Needed on msys2 to immediately print the message
275 #endif
276 
277  return wxDialog::Enable( enable );
278 }

◆ EndQuasiModal()

void DIALOG_SHIM::EndQuasiModal ( int  retCode)
inherited

Definition at line 397 of file dialog_shim.cpp.

398 {
399  // Hook up validator and transfer data from controls handling so quasi-modal dialogs
400  // handle validation in the same way as other dialogs.
401  if( ( retCode == wxID_OK ) && ( !Validate() || !TransferDataFromWindow() ) )
402  return;
403 
404  SetReturnCode( retCode );
405 
406  if( !IsQuasiModal() )
407  {
408  wxFAIL_MSG( "either DIALOG_SHIM::EndQuasiModal called twice or ShowQuasiModal"
409  "wasn't called" );
410  return;
411  }
412 
413  if( m_qmodal_loop )
414  {
415  if( m_qmodal_loop->IsRunning() )
416  m_qmodal_loop->Exit( 0 );
417  else
418  m_qmodal_loop->ScheduleExit( 0 );
419 
421  }
422 
425 
426  Show( false );
427 }
WX_EVENT_LOOP * m_qmodal_loop
Definition: dialog_shim.h:206
#define NULL
bool IsQuasiModal()
Definition: dialog_shim.h:123
bool Show(bool show) override
WDO_ENABLE_DISABLE * m_qmodal_parent_disabler
Definition: dialog_shim.h:209

References DIALOG_SHIM::IsQuasiModal(), DIALOG_SHIM::m_qmodal_loop, DIALOG_SHIM::m_qmodal_parent_disabler, NULL, and DIALOG_SHIM::Show().

Referenced by HK_PROMPT_DIALOG::EndFlexible(), DIALOG_SHIM::OnButton(), DIALOG_EDIT_COMPONENTS_LIBID::onCancel(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnCancelButtonClick(), DIALOG_EDIT_COMPONENT_IN_LIBRARY::OnCancelButtonClick(), DIALOG_LIB_EDIT_PIN_TABLE::OnClose(), DIALOG_PRINT_GENERIC::onCloseButton(), DIALOG_CHOOSE_FOOTPRINT::OnCloseTimer(), DIALOG_CHOOSE_COMPONENT::OnCloseTimer(), DIALOG_SHIM::OnCloseWindow(), HTML_MESSAGE_BOX::OnOKButtonClick(), DIALOG_CHOOSE_FOOTPRINT::OnUseBrowser(), DIALOG_CHOOSE_COMPONENT::OnUseBrowser(), and DIALOG_SHIM::~DIALOG_SHIM().

◆ FinishDialogSettings()

void DIALOG_SHIM::FinishDialogSettings ( )
protectedinherited

In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls.

FinishDialogSettings must be called from derived classes, when all widgets are initialized, and therefore their size fixed. If TransferDataToWindow() is used to initialize widgets, at end of TransferDataToWindow, or better at end of a wxInitDialogEvent handler

In any case, the best way is to call it in a wxInitDialogEvent handler after calling TransfertDataToWindow(), which is the default wxInitDialogEvent handler wxDialog

Definition at line 142 of file dialog_shim.cpp.

143 {
144  // must be called from the constructor of derived classes,
145  // when all widgets are initialized, and therefore their size fixed
146 
147  // SetSizeHints fixes the minimal size of sizers in the dialog
148  // (SetSizeHints calls Fit(), so no need to call it)
149  GetSizer()->SetSizeHints( this );
150 
151  // the default position, when calling the first time the dlg
152  Center();
153 }

References PCAD2KICAD::Center.

Referenced by DIALOG_3D_VIEW_OPTIONS::DIALOG_3D_VIEW_OPTIONS(), DIALOG_ANNOTATE::DIALOG_ANNOTATE(), DIALOG_BOARD_SETUP(), DIALOG_BOM::DIALOG_BOM(), DIALOG_COPPER_ZONE::DIALOG_COPPER_ZONE(), DIALOG_DRC::DIALOG_DRC(), DIALOG_EDIT_COMPONENT_IN_LIBRARY::DIALOG_EDIT_COMPONENT_IN_LIBRARY(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC(), DIALOG_EDIT_COMPONENTS_LIBID::DIALOG_EDIT_COMPONENTS_LIBID(), DIALOG_EDIT_LINE_STYLE::DIALOG_EDIT_LINE_STYLE(), DIALOG_EDIT_SHEET_PIN::DIALOG_EDIT_SHEET_PIN(), DIALOG_EDITOR_DATA::DIALOG_EDITOR_DATA(), DIALOG_ENUM_PADS::DIALOG_ENUM_PADS(), DIALOG_ERC::DIALOG_ERC(), DIALOG_EXCHANGE_FOOTPRINTS::DIALOG_EXCHANGE_FOOTPRINTS(), DIALOG_EXPORT_3DFILE::DIALOG_EXPORT_3DFILE(), DIALOG_EXPORT_IDF3::DIALOG_EXPORT_IDF3(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_EXPORT_SVG::DIALOG_EXPORT_SVG(), DIALOG_FIELDS_EDITOR_GLOBAL::DIALOG_FIELDS_EDITOR_GLOBAL(), DIALOG_FOOTPRINT_BOARD_EDITOR::DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::DIALOG_FOOTPRINT_FP_EDITOR(), DIALOG_FOOTPRINT_WIZARD_LIST::DIALOG_FOOTPRINT_WIZARD_LIST(), DIALOG_GENCAD_EXPORT_OPTIONS::DIALOG_GENCAD_EXPORT_OPTIONS(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS(), DIALOG_GLOBAL_LIB_TABLE_CONFIG::DIALOG_GLOBAL_LIB_TABLE_CONFIG(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_IMAGE_EDITOR::DIALOG_IMAGE_EDITOR(), DIALOG_INSPECTOR::DIALOG_INSPECTOR(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_KEEPOUT_AREA_PROPERTIES::DIALOG_KEEPOUT_AREA_PROPERTIES(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_LIB_EDIT_DRAW_ITEM::DIALOG_LIB_EDIT_DRAW_ITEM(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), DIALOG_LIB_EDIT_TEXT::DIALOG_LIB_EDIT_TEXT(), DIALOG_LIB_NEW_COMPONENT::DIALOG_LIB_NEW_COMPONENT(), DIALOG_LIST_HOTKEYS::DIALOG_LIST_HOTKEYS(), DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT(), DIALOG_NETLIST::DIALOG_NETLIST(), DIALOG_NON_COPPER_ZONES_EDITOR::DIALOG_NON_COPPER_ZONES_EDITOR(), DIALOG_PAD_PRIMITIVE_POLY_PROPS::DIALOG_PAD_PRIMITIVE_POLY_PROPS(), DIALOG_PAD_PRIMITIVES_PROPERTIES::DIALOG_PAD_PRIMITIVES_PROPERTIES(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PASTE_SPECIAL::DIALOG_PASTE_SPECIAL(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_PRINT_GENERIC::DIALOG_PRINT_GENERIC(), DIALOG_PRINT_USING_PRINTER::DIALOG_PRINT_USING_PRINTER(), DIALOG_PUSH_PAD_PROPERTIES::DIALOG_PUSH_PAD_PROPERTIES(), DIALOG_SCH_SHEET_PROPS::DIALOG_SCH_SHEET_PROPS(), DIALOG_SCHEMATIC_SETUP::DIALOG_SCHEMATIC_SETUP(), DIALOG_SELECT_NET_FROM_LIST::DIALOG_SELECT_NET_FROM_LIST(), DIALOG_SWAP_LAYERS::DIALOG_SWAP_LAYERS(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), DIALOG_TRACK_VIA_SIZE::DIALOG_TRACK_VIA_SIZE(), DIALOG_UPDATE_FROM_PCB::DIALOG_UPDATE_FROM_PCB(), DIALOG_UPDATE_PCB::DIALOG_UPDATE_PCB(), DLG_SELECT_3DMODEL::DLG_SELECT_3DMODEL(), PAGED_DIALOG::finishInitialization(), DIALOG_EDIT_ONE_FIELD::init(), DIALOG_EDIT_LIBRARY_TABLES::InstallPanel(), NETLIST_DIALOG::NETLIST_DIALOG(), DIALOG_GRAPHIC_ITEM_PROPERTIES::OnInitDlg(), DIALOG_SCH_SHEET_PROPS::OnInitDlg(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnInitDlg(), DIALOG_SIM_SETTINGS::onInitDlg(), DIALOG_SPICE_MODEL::onInitDlg(), DIALOG_SIGNAL_LIST::TransferDataToWindow(), DIALOG_UPDATE_FIELDS::TransferDataToWindow(), DIALOG_COLOR_PICKER::TransferDataToWindow(), and DIALOG_BOARD_STATISTICS::TransferDataToWindow().

◆ finishInitialization()

void PAGED_DIALOG::finishInitialization ( )
protectedinherited

Definition at line 88 of file paged_dialog.cpp.

89 {
90  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
91  m_macHack.push_back( true );
92 
93  // For some reason adding page labels to the treeCtrl doesn't invalidate its bestSize
94  // cache so we have to do it by hand
95  m_treebook->GetTreeCtrl()->InvalidateBestSize();
96 
97  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
98  {
99  m_treebook->ExpandNode( i );
100  m_treebook->GetPage( i )->Layout();
101  }
102 
103  m_treebook->Fit();
104  m_treebook->Layout();
105 
107 }
std::vector< bool > m_macHack
Definition: paged_dialog.h:38
void FinishDialogSettings()
In all dialogs, we must call the same functions to fix minimal dlg size, the default position and per...
wxTreebook * m_treebook
Definition: paged_dialog.h:65

References DIALOG_SHIM::FinishDialogSettings(), PAGED_DIALOG::m_macHack, and PAGED_DIALOG::m_treebook.

Referenced by PAGED_DIALOG::TransferDataToWindow().

◆ FixOSXCancelButtonIssue()

static void DIALOG_SHIM::FixOSXCancelButtonIssue ( wxWindow *  aWindow)
staticinherited

◆ GetTreebook()

◆ GetType()

HOLDER_TYPE KIWAY_HOLDER::GetType ( )
inlineinherited

Definition at line 49 of file kiway_holder.h.

49 { return m_type; }
HOLDER_TYPE m_type
Definition: kiway_holder.h:82

References KIWAY_HOLDER::m_type.

Referenced by DIALOG_SHIM::DIALOG_SHIM().

◆ GetUserUnits()

◆ HorizPixelsFromDU()

int DIALOG_SHIM::HorizPixelsFromDU ( int  x)
protectedinherited

Convert an integer number of dialog units to pixels, horizontally.

See SetSizeInDU or wxDialog documentation for more information.

Definition at line 163 of file dialog_shim.cpp.

164 {
165  wxSize sz( x, 0 );
166  return ConvertDialogToPixels( sz ).x;
167 }

Referenced by DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), and DIALOG_CHOOSE_FOOTPRINT::DIALOG_CHOOSE_FOOTPRINT().

◆ IsCtrl()

static bool DIALOG_SHIM::IsCtrl ( int  aChar,
const wxKeyEvent &  e 
)
inlinestaticinherited

Definition at line 136 of file dialog_shim.h.

137  {
138  return e.GetKeyCode() == aChar && e.ControlDown() && !e.AltDown() &&
139  !e.ShiftDown() && !e.MetaDown();
140  }

Referenced by DIALOG_TEXT_PROPERTIES::OnCharHook().

◆ IsQuasiModal()

◆ IsShiftCtrl()

static bool DIALOG_SHIM::IsShiftCtrl ( int  aChar,
const wxKeyEvent &  e 
)
inlinestaticinherited

Definition at line 142 of file dialog_shim.h.

143  {
144  return e.GetKeyCode() == aChar && e.ControlDown() && !e.AltDown() &&
145  e.ShiftDown() && !e.MetaDown();
146  }

Referenced by DIALOG_TEXT_PROPERTIES::OnCharHook().

◆ Kiway()

KIWAY& KIWAY_HOLDER::Kiway ( ) const
inlineinherited

Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in.

A KIWAY_HOLDER is not necessarily a KIWAY_PLAYER.

Definition at line 56 of file kiway_holder.h.

57  {
58  wxASSERT( m_kiway ); // smoke out bugs in Debug build, then Release runs fine.
59  return *m_kiway;
60  }
KIWAY * m_kiway
Definition: kiway_holder.h:81

References KIWAY_HOLDER::m_kiway.

Referenced by TREEPROJECT_ITEM::Activate(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), PCB_BASE_EDIT_FRAME::AddLibrary(), LIB_CONTROL::AddSymbolToSchematic(), CVPCB_MAINFRAME::BuildLIBRARY_LISTBOX(), COMMON_CONTROL::ConfigurePaths(), DIALOG_CHOOSE_FOOTPRINT::ConstructRightPanel(), DIALOG_CHOOSE_COMPONENT::ConstructRightPanel(), PCB_BASE_FRAME::CreateAndShow3D_Frame(), CVPCB_MAINFRAME::CVPCB_MAINFRAME(), DIALOG_RESCUE_EACH::DIALOG_RESCUE_EACH(), DIALOG_SHIM::DIALOG_SHIM(), CVPCB_MAINFRAME::DisplayStatus(), FIELDS_GRID_TRICKS::doPopupSelection(), FIELDS_EDITOR_GRID_TRICKS::doPopupSelection(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), SCH_EDITOR_CONTROL::EditWithLibEdit(), BACK_ANNOTATE::FetchNetlistFromPCB(), DISPLAY_FOOTPRINTS_FRAME::GetModule(), PCB_EDIT_FRAME::importFile(), KICAD_MANAGER_FRAME::language_change(), KIWAY_PLAYER::language_change(), LIB_TREE_MODEL_ADAPTER::LIB_TREE_MODEL_ADAPTER(), CVPCB_MAINFRAME::LoadFootprintFiles(), KICAD_MANAGER_FRAME::LoadProject(), TEXT_BUTTON_SYMBOL_CHOOSER::OnButtonClick(), TEXT_BUTTON_FP_CHOOSER::OnButtonClick(), KICAD_MANAGER_FRAME::OnCloseWindow(), SCH_EDIT_FRAME::OnCloseWindow(), PL_EDITOR_FRAME::OnExit(), SCH_EDIT_FRAME::OnExit(), FOOTPRINT_EDIT_FRAME::OnExitKiCad(), FOOTPRINT_VIEWER_FRAME::OnExitKiCad(), LIB_EDIT_FRAME::OnExitKiCad(), SAVE_AS_TRAVERSER::OnFile(), KICAD_MANAGER_FRAME::OnImportEagleFiles(), DIALOG_CHOOSE_COMPONENT::OnInitDialog(), SCH_EDIT_FRAME::OnOpenCvpcb(), SCH_EDIT_FRAME::OnOpenPcbnew(), EDA_BASE_FRAME::OnPreferences(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), DIALOG_EDIT_ONE_FIELD::OnTextValueSelectButtonClick(), FOOTPRINT_EDIT_FRAME::OnUpdateInsertModuleInBoard(), FOOTPRINT_EDIT_FRAME::OnUpdateLoadModuleFromBoard(), SCH_EDIT_FRAME::OnUpdatePCB(), KIWAY_HOLDER::Prj(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), FOOTPRINT_VIEWER_FRAME::ReCreateFootprintList(), LIB_EDIT_FRAME::refreshSchematic(), SCH_EDITOR_CONTROL::rescueProject(), EE_INSPECTION_TOOL::RunSimulation(), CVPCB_MAINFRAME::SaveFootprintAssociation(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), LIB_TREE_MODEL_ADAPTER::SavePinnedItems(), SCH_BASE_FRAME::SelectComponentFromLibBrowser(), SCH_EDIT_FRAME::SendCrossProbeClearHighlight(), SCH_EDIT_FRAME::SendCrossProbeNetName(), PCB_EDIT_FRAME::SendCrossProbeNetName(), CVPCB_MAINFRAME::SendMessageToEESCHEMA(), PCB_EDIT_FRAME::SendMessageToEESCHEMA(), SCH_EDIT_FRAME::SendMessageToPCBNEW(), SCH_EDIT_FRAME::sendNetlistToCvpcb(), SCH_EDIT_FRAME::SetCrossProbeConnection(), CVPCB_CONTROL::ShowFootprintViewer(), COMMON_CONTROL::ShowLibraryTable(), COMMON_CONTROL::ShowPlayer(), KICAD_MANAGER_CONTROL::ShowPlayer(), SIM_PLOT_FRAME::SIM_PLOT_FRAME(), PCB_EDITOR_CONTROL::UpdateSchematicFromPCB(), and DIALOG_EXCHANGE_FOOTPRINTS::ViewAndSelectFootprint().

◆ OnAuxiliaryAction()

void DIALOG_BOARD_SETUP::OnAuxiliaryAction ( wxCommandEvent &  event)
overrideprotectedvirtual

Reimplemented from PAGED_DIALOG.

Definition at line 132 of file dialog_board_setup.cpp.

133 {
134  DIALOG_IMPORT_SETTINGS importDlg( this, m_frame );
135 
136  if( importDlg.ShowModal() == wxID_CANCEL )
137  return;
138 
139  wxFileName boardFn( importDlg.GetFilePath() );
140  wxFileName projectFn( boardFn );
141 
142  projectFn.SetExt( ProjectFileExtension );
143 
144  if( !m_frame->GetSettingsManager()->LoadProject( projectFn.GetFullPath(), false ) )
145  {
146  wxString msg = wxString::Format( _( "Error importing settings from board:\n"
147  "Associated project file %s could not be loaded" ),
148  projectFn.GetFullPath() );
149  DisplayErrorMessage( this, msg );
150 
151  return;
152  }
153 
154  PROJECT* otherPrj = m_frame->GetSettingsManager()->GetProject( projectFn.GetFullPath() );
155 
157 
158  BOARD* otherBoard = new BOARD();
159 
160  try
161  {
162  otherBoard = pi->Load( boardFn.GetFullPath(), nullptr, nullptr );
163  }
164  catch( const IO_ERROR& ioe )
165  {
166  if( ioe.Problem() != wxT( "CANCEL" ) )
167  {
168  wxString msg =
169  wxString::Format( _( "Error loading board file:\n%s" ), boardFn.GetFullPath() );
170  DisplayErrorMessage( this, msg, ioe.What() );
171  }
172 
173  m_frame->GetSettingsManager()->UnloadProject( otherPrj, false );
174 
175  return;
176  }
177 
178  otherBoard->SetProject( otherPrj );
179 
180  if( importDlg.m_LayersOpt->GetValue() )
181  m_layers->ImportSettingsFrom( otherBoard );
182  if( importDlg.m_TextAndGraphicsOpt->GetValue() )
183  m_textAndGraphics->ImportSettingsFrom( otherBoard );
184  if( importDlg.m_ConstraintsOpt->GetValue() )
185  m_constraints->ImportSettingsFrom( otherBoard );
186  if( importDlg.m_NetclassesOpt->GetValue() )
188  if( importDlg.m_TracksAndViasOpt->GetValue() )
189  m_tracksAndVias->ImportSettingsFrom( otherBoard );
190  if( importDlg.m_MaskAndPasteOpt->GetValue() )
191  m_maskAndPaste->ImportSettingsFrom( otherBoard );
192 
193  // If layers options are imported, import also the stackup
194  // layers options and stackup are linked, so they cannot be imported
195  // separately, and stackup can be imported only after layers options
196  //
197  // Note also currently only the list of enabled layers can be imported, because
198  // we import settings from a .pro project file, not the settings inside
199  // a board, and info only living in the board is not imported.
200  // TODO: Add import of physical settings now that we are actually loading the board here
201  if( importDlg.m_LayersOpt->GetValue() )
202  m_physicalStackup->ImportSettingsFrom( otherBoard );
203 
204  if( importDlg.m_SeveritiesOpt->GetValue() )
206 
207  otherBoard->ClearProject();
208 
209  m_frame->GetSettingsManager()->UnloadProject( otherPrj, false );
210 
211  delete otherBoard;
212 }
void ImportSettingsFrom(std::map< int, int > &aSettings)
PROJECT holds project specific data.
Definition: project.h:61
void DisplayErrorMessage(wxWindow *aParent, const wxString &aText, const wxString &aExtraInfo)
Display an error message with aMessage.
Definition: confirm.cpp:252
SETTINGS_MANAGER * GetSettingsManager() const
const std::string ProjectFileExtension
std::map< int, int > m_DRCSeverities
PANEL_SETUP_NETCLASSES * m_netclasses
BOARD_DESIGN_SETTINGS & GetDesignSettings() const
Function GetDesignSettings.
Definition: class_board.h:551
PCB_EDIT_FRAME * m_frame
virtual const wxString Problem() const
what was the problem?
Definition: exceptions.cpp:49
PANEL_SETUP_BOARD_STACKUP * m_physicalStackup
PANEL_SETUP_SEVERITIES * m_severities
RELEASER releases a PLUGIN in the context of a potential thrown exception, through its destructor.
Definition: io_mgr.h:579
virtual const wxString What() const
A composite of Problem() and Where()
Definition: exceptions.cpp:33
void ImportSettingsFrom(BOARD *aBoard)
NETCLASSES & GetNetClasses() const
void ClearProject()
void ImportSettingsFrom(BOARD *aBoard)
bool LoadProject(const wxString &aFullPath, bool aSetActive=true)
Loads a project or sets up a new project with a specified path.
void SetProject(PROJECT *aProject)
Links a board to a given project.
PANEL_SETUP_TRACKS_AND_VIAS * m_tracksAndVias
void Format(OUTPUTFORMATTER *out, int aNestLevel, int aCtl, CPTREE &aTree)
Function Format outputs a PTREE into s-expression format via an OUTPUTFORMATTER derivative.
Definition: ptree.cpp:205
BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:180
#define _(s)
Definition: 3d_actions.cpp:33
static PLUGIN * PluginFind(PCB_FILE_T aFileType)
Function PluginFind returns a PLUGIN which the caller can use to import, export, save,...
Definition: io_mgr.cpp:61
bool UnloadProject(PROJECT *aProject, bool aSave=true)
Saves, unloads and unregisters the given PROJECT.
PANEL_SETUP_TEXT_AND_GRAPHICS * m_textAndGraphics
PANEL_SETUP_MASK_AND_PASTE * m_maskAndPaste
void ImportSettingsFrom(NETCLASSES *aBoard)
PANEL_SETUP_LAYERS * m_layers
Struct IO_ERROR is a class used to hold an error message and may be used when throwing exceptions con...
Definition: ki_exception.h:76
PROJECT * GetProject(const wxString &aFullPath) const
Retrieves a loaded project by name.
PANEL_SETUP_FEATURE_CONSTRAINTS * m_constraints
S-expression Pcbnew file format.
Definition: io_mgr.h:57

References _, BOARD::ClearProject(), DisplayErrorMessage(), Format(), BOARD::GetDesignSettings(), DIALOG_IMPORT_SETTINGS::GetFilePath(), BOARD_DESIGN_SETTINGS::GetNetClasses(), SETTINGS_MANAGER::GetProject(), EDA_BASE_FRAME::GetSettingsManager(), PANEL_SETUP_MASK_AND_PASTE::ImportSettingsFrom(), PANEL_SETUP_TEXT_AND_GRAPHICS::ImportSettingsFrom(), PANEL_SETUP_LAYERS::ImportSettingsFrom(), PANEL_SETUP_FEATURE_CONSTRAINTS::ImportSettingsFrom(), PANEL_SETUP_SEVERITIES::ImportSettingsFrom(), PANEL_SETUP_TRACKS_AND_VIAS::ImportSettingsFrom(), PANEL_SETUP_NETCLASSES::ImportSettingsFrom(), PANEL_SETUP_BOARD_STACKUP::ImportSettingsFrom(), IO_MGR::KICAD_SEXP, SETTINGS_MANAGER::LoadProject(), m_constraints, DIALOG_IMPORT_SETTINGS_BASE::m_ConstraintsOpt, BOARD_DESIGN_SETTINGS::m_DRCSeverities, m_frame, m_layers, DIALOG_IMPORT_SETTINGS_BASE::m_LayersOpt, m_maskAndPaste, DIALOG_IMPORT_SETTINGS_BASE::m_MaskAndPasteOpt, m_netclasses, DIALOG_IMPORT_SETTINGS_BASE::m_NetclassesOpt, m_physicalStackup, m_severities, DIALOG_IMPORT_SETTINGS_BASE::m_SeveritiesOpt, m_textAndGraphics, DIALOG_IMPORT_SETTINGS_BASE::m_TextAndGraphicsOpt, m_tracksAndVias, DIALOG_IMPORT_SETTINGS_BASE::m_TracksAndViasOpt, IO_MGR::PluginFind(), IO_ERROR::Problem(), ProjectFileExtension, BOARD::SetProject(), SETTINGS_MANAGER::UnloadProject(), and IO_ERROR::What().

◆ OnPageChange()

void DIALOG_BOARD_SETUP::OnPageChange ( wxBookCtrlEvent &  event)
protected

Definition at line 108 of file dialog_board_setup.cpp.

109 {
110  if( event.GetSelection() == m_physicalStackupPage )
112 
113 #ifdef __WXMAC__
114  // Work around an OSX bug where the wxGrid children don't get placed correctly until
115  // the first resize event
116  int page = event.GetSelection();
117 
118  if( m_macHack[ page ] )
119  {
120  wxSize pageSize = m_treebook->GetPage( page )->GetSize();
121  pageSize.x -= 1;
122  pageSize.y += 2;
123 
124  m_treebook->GetPage( page )->SetSize( pageSize );
125  m_macHack[ page ] = false;
126  }
127 #endif
128 }
PANEL_SETUP_BOARD_STACKUP * m_physicalStackup
void OnLayersOptionsChanged(LSET aNewLayerSet)
Must be called if the copper layers count has changed or solder mask, solder paste or silkscreen laye...
wxTreebook * m_treebook
Definition: paged_dialog.h:65
PANEL_SETUP_LAYERS * m_layers
std::vector< bool > m_macHack

References PANEL_SETUP_LAYERS::GetUILayerMask(), m_layers, m_macHack, m_physicalStackup, m_physicalStackupPage, PAGED_DIALOG::m_treebook, and PANEL_SETUP_BOARD_STACKUP::OnLayersOptionsChanged().

Referenced by DIALOG_BOARD_SETUP(), and ~DIALOG_BOARD_SETUP().

◆ OnPaint()

void DIALOG_SHIM::OnPaint ( wxPaintEvent &  event)
inherited

Definition at line 300 of file dialog_shim.cpp.

301 {
302  if( m_firstPaintEvent )
303  {
305 
306  selectAllInTextCtrls( GetChildren() );
307 
309  m_initialFocusTarget->SetFocus();
310  else
311  SetFocus(); // Focus the dialog itself
312 
313  m_firstPaintEvent = false;
314  }
315 
316  event.Skip();
317 }
wxWindow * m_initialFocusTarget
Definition: dialog_shim.h:204
bool m_firstPaintEvent
Definition: dialog_shim.h:203
void FixupCancelButtonCmdKeyCollision(wxWindow *aWindow)
Definition: gtk/ui.cpp:38
static void selectAllInTextCtrls(wxWindowList &children)

References KIPLATFORM::UI::FixupCancelButtonCmdKeyCollision(), DIALOG_SHIM::m_firstPaintEvent, DIALOG_SHIM::m_initialFocusTarget, and selectAllInTextCtrls().

Referenced by DIALOG_SHIM::DIALOG_SHIM().

◆ OnUpdateUI()

void PAGED_DIALOG::OnUpdateUI ( wxUpdateUIEvent &  event)
protectedinherited

Definition at line 250 of file paged_dialog.cpp.

251 {
252  // Handle an error. This is delayed to OnUpdateUI so that we can change the focus
253  // even when the original validation was triggered from a killFocus event, and so
254  // that the corresponding notebook page can be shown in the background when triggered
255  // from an OK.
256  if( m_errorCtrl )
257  {
258  // We will re-enter this routine when the error dialog is displayed, so make
259  // sure we don't keep putting up more dialogs.
260  wxWindow* ctrl = m_errorCtrl;
261  m_errorCtrl = nullptr;
262 
264 
265  if( wxTextCtrl* textCtrl = dynamic_cast<wxTextCtrl*>( ctrl ) )
266  {
267  textCtrl->SetSelection( -1, -1 );
268  textCtrl->SetFocus();
269  return;
270  }
271 
272  if( wxStyledTextCtrl* scintilla = dynamic_cast<wxStyledTextCtrl*>( ctrl ) )
273  {
274  if( m_errorRow > 0 )
275  {
276  int pos = scintilla->PositionFromLine( m_errorRow - 1 ) + ( m_errorCol - 1 );
277  scintilla->GotoPos( pos );
278  }
279 
280  scintilla->SetFocus();
281  return;
282  }
283 
284  if( wxGrid* grid = dynamic_cast<wxGrid*>( ctrl ) )
285  {
286  grid->SetFocus();
287  grid->MakeCellVisible( m_errorRow, m_errorCol );
288  grid->SetGridCursor( m_errorRow, m_errorCol );
289 
290  grid->EnableCellEditControl( true );
291  grid->ShowCellEditControl();
292  return;
293  }
294  }
295 }
void DisplayErrorMessage(wxWindow *aParent, const wxString &aText, const wxString &aExtraInfo)
Display an error message with aMessage.
Definition: confirm.cpp:252
wxWindow * m_errorCtrl
Definition: paged_dialog.h:34
wxString m_errorMessage
Definition: paged_dialog.h:33

References DisplayErrorMessage(), PAGED_DIALOG::m_errorCol, PAGED_DIALOG::m_errorCtrl, PAGED_DIALOG::m_errorMessage, and PAGED_DIALOG::m_errorRow.

Referenced by PAGED_DIALOG::PAGED_DIALOG(), and PAGED_DIALOG::~PAGED_DIALOG().

◆ Prj()

PROJECT & KIWAY_HOLDER::Prj ( ) const
inherited

Function Prj returns a reference to the PROJECT "associated with" this KIWAY.

Definition at line 35 of file kiway_holder.cpp.

36 {
37  return Kiway().Prj();
38 }
KIWAY & Kiway() const
Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in...
Definition: kiway_holder.h:56
VTBL_ENTRY PROJECT & Prj() const
Function Prj returns the PROJECT associated with this KIWAY.
Definition: kiway.cpp:172

References KIWAY_HOLDER::Kiway(), and KIWAY::Prj().

Referenced by PCB_BASE_EDIT_FRAME::AddLibrary(), LIB_MANAGER::addLibrary(), SCH_EDIT_FRAME::AppendSchematic(), PCB_EDIT_FRAME::ArchiveModulesOnBoard(), DIALOG_SYMBOL_REMAP::backupProject(), CVPCB_MAINFRAME::buildEquivalenceList(), CVPCB_MAINFRAME::BuildLIBRARY_LISTBOX(), DIALOG_FOOTPRINT_FP_EDITOR::Cfg3DPath(), DIALOG_FOOTPRINT_BOARD_EDITOR::Cfg3DPath(), DIALOG_GEN_FOOTPRINT_POSITION::CreateGerberFiles(), PCB_BASE_EDIT_FRAME::CreateNewLibrary(), DIALOG_PLOT_SCHEMATIC::createPlotFileName(), DIALOG_SYMBOL_REMAP::createProjectSymbolLibTable(), SCH_EDIT_FRAME::CreateScreens(), FOOTPRINT_EDIT_FRAME::DeleteModuleFromLibrary(), DIALOG_BOARD_SETUP(), DIALOG_BOARD_STATISTICS::DIALOG_BOARD_STATISTICS(), DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), DIALOG_CHOOSE_FOOTPRINT::DIALOG_CHOOSE_FOOTPRINT(), DIALOG_CONFIG_EQUFILES::DIALOG_CONFIG_EQUFILES(), DIALOG_FOOTPRINT_BOARD_EDITOR::DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::DIALOG_FOOTPRINT_FP_EDITOR(), DIALOG_PAGES_SETTINGS::DIALOG_PAGES_SETTINGS(), DIALOG_SCHEMATIC_SETUP::DIALOG_SCHEMATIC_SETUP(), DIALOG_SYMBOL_REMAP::DIALOG_SYMBOL_REMAP(), LIB_VIEW_FRAME::DisplayLibInfos(), CVPCB_MAINFRAME::DisplayStatus(), PL_DRAW_PANEL_GAL::DisplayWorksheet(), PCB_EDIT_FRAME::doAutoSave(), FIELDS_GRID_TRICKS::doPopupSelection(), FIELDS_EDITOR_GRID_TRICKS::doPopupSelection(), KICAD_MANAGER_CONTROL::Execute(), PCB_EDIT_FRAME::Export_IDF3(), DIALOG_EXPORT_SVG::ExportSVGFile(), LIB_CONTROL::ExportSymbolAsSVG(), LIB_CONTROL::ExportView(), PCB_EDIT_FRAME::ExportVRML_File(), PCB_EDIT_FRAME::Files_io_from_id(), PCB_EDIT_FRAME::GenD356File(), DIALOG_GENDRILL::GenDrillAndMapFiles(), FOOTPRINT_VIEWER_FRAME::getCurFootprintName(), LIB_EDIT_FRAME::GetCurLib(), FOOTPRINT_VIEWER_FRAME::getCurNickname(), SCH_BASE_FRAME::GetLibPart(), DIALOG_SYMBOL_REMAP::getLibsNotInGlobalSymbolLibTable(), DISPLAY_FOOTPRINTS_FRAME::GetModule(), KICAD_MANAGER_FRAME::GetProjectFileName(), LIB_VIEW_FRAME::GetSelectedSymbol(), FP_THREAD_IFACE::GetTable(), PCB_EDIT_FRAME::importFile(), SCH_EDIT_FRAME::importFile(), SCH_EDITOR_CONTROL::ImportFPAssignments(), DIALOG_CONFIG_EQUFILES::Init(), FOOTPRINT_EDIT_FRAME::initLibraryTree(), SCH_EDIT_FRAME::KiwayMailIn(), LIB_EDIT_FRAME::KiwayMailIn(), EDA_DRAW_FRAME::LibraryFileBrowser(), LIB_EDIT_FRAME::LoadComponentFromCurrentLib(), CVPCB_MAINFRAME::LoadFootprintFiles(), DIALOG_SPICE_MODEL::loadLibrary(), LIB_EDIT_FRAME::LoadOneSymbol(), KICAD_MANAGER_FRAME::LoadProject(), SCH_EDIT_FRAME::LoadProject(), SCH_EDIT_FRAME::LoadProjectSettings(), PCB_EDIT_FRAME::LoadProjectSettings(), DRC::LoadRules(), SCH_EDIT_FRAME::LoadSheetFromFile(), DIALOG_FOOTPRINT_FP_EDITOR::On3DModelCellChanged(), DIALOG_FOOTPRINT_BOARD_EDITOR::On3DModelCellChanged(), FOOTPRINT_VIEWER_FRAME::OnActivate(), DIALOG_FOOTPRINT_FP_EDITOR::OnAdd3DModel(), DIALOG_FOOTPRINT_BOARD_EDITOR::OnAdd3DModel(), KICAD_MANAGER_FRAME::OnBrowseInFileExplorer(), TEXT_BUTTON_URL::OnButtonClick(), TEXT_BUTTON_FILE_BROWSER::OnButtonClick(), DIALOG_EDIT_COMPONENTS_LIBID::onClickOrphansButton(), SCH_EDIT_FRAME::OnCloseWindow(), DIALOG_GENDRILL::OnGenReportFile(), SCH_EDIT_FRAME::OnImportProject(), DIALOG_CHOOSE_COMPONENT::OnInitDialog(), DIALOG_CONFIG_EQUFILES::OnOkClick(), SCH_EDIT_FRAME::OnOpenCvpcb(), KICAD_MANAGER_FRAME::OnOpenFileInTextEditor(), DIALOG_NETLIST::OnOpenNetlistClick(), SCH_EDIT_FRAME::OnOpenPcbnew(), DIALOG_EXPORT_SVG::OnOutputDirectoryBrowseClicked(), DIALOG_PLOT::OnOutputDirectoryBrowseClicked(), DIALOG_PLOT_SCHEMATIC::OnOutputDirectoryBrowseClicked(), DIALOG_GEN_FOOTPRINT_POSITION::OnOutputDirectoryBrowseClicked(), DIALOG_GENDRILL::OnOutputDirectoryBrowseClicked(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), DIALOG_BOM::OnRunGenerator(), FOOTPRINT_EDIT_FRAME::OnSaveFootprintAsPng(), DIALOG_ERC::OnSaveReport(), DIALOG_DRC::OnSaveReport(), PROPERTIES_FRAME::onScintillaCharAdded(), DIALOG_LABEL_EDITOR::onScintillaCharAdded(), DIALOG_SCH_EDIT_ONE_FIELD::onScintillaCharAdded(), DIALOG_SPICE_MODEL::onSelectLibrary(), LIB_VIEW_FRAME::OnSelectSymbol(), KICAD_MANAGER_FRAME::OnUnarchiveFiles(), SCH_EDIT_FRAME::OnUpdatePCB(), SCH_EDIT_FRAME::OpenProjectFiles(), PCB_EDIT_FRAME::OpenProjectFiles(), PANEL_PREV_3D::PANEL_PREV_3D(), SCH_EDITOR_CONTROL::Paste(), FOOTPRINT_EDITOR_TOOLS::PasteFootprint(), PCB_BASE_EDIT_FRAME::PCB_BASE_EDIT_FRAME(), DIALOG_PLOT::Plot(), DIALOG_PLOT_SCHEMATIC::Plot_1_Page_HPGL(), DIALOG_PLOT_SCHEMATIC::PlotOneSheetDXF(), DIALOG_CHOOSE_COMPONENT::PopulateFootprintSelector(), SCH_EDITOR_CONTROL::Print(), SCH_EDIT_FRAME::PrintPage(), EDA_DRAW_FRAME::PrintWorkSheet(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), PCB_EDIT_FRAME::RecreateCmpFileFromBoard(), FOOTPRINT_VIEWER_FRAME::ReCreateFootprintList(), FOOTPRINT_VIEWER_FRAME::ReCreateLibraryList(), LIB_VIEW_FRAME::ReCreateListCmp(), LIB_VIEW_FRAME::ReCreateListLib(), SCH_EDIT_TOOL::RefreshSymbolFromLibrary(), EDA_3D_VIEWER::ReloadRequest(), DIALOG_SYMBOL_REMAP::remapSymbolToLibTable(), SCH_EDITOR_CONTROL::RescueLegacyProject(), SCH_EDITOR_CONTROL::RescueSymbolLibTableProject(), FOOTPRINT_EDIT_FRAME::restoreLastFootprint(), FOOTPRINT_EDIT_FRAME::retainLastFootprint(), DIALOG_EDIT_COMPONENTS_LIBID::revertChanges(), SCH_EDIT_FRAME::SaveEEFile(), FOOTPRINT_EDIT_FRAME::SaveFootprint(), FOOTPRINT_EDIT_FRAME::SaveFootprintAs(), FOOTPRINT_EDIT_FRAME::SaveFootprintInLibrary(), LIB_EDIT_FRAME::saveLibrary(), LIB_EDIT_FRAME::SaveOneSymbol(), LIB_EDIT_FRAME::savePartAs(), PCB_EDIT_FRAME::SavePcbFile(), SCH_EDIT_FRAME::SaveProject(), PCB_EDIT_FRAME::SaveProjectSettings(), DIALOG_BOARD_STATISTICS::saveReportClicked(), SCH_BASE_FRAME::saveSymbolLibTables(), FOOTPRINT_VIEWER_FRAME::SelectAndViewFootprint(), SCH_BASE_FRAME::SelectCompFromLibTree(), PCB_BASE_FRAME::SelectLibrary(), LIB_EDIT_FRAME::SelectLibraryFromList(), LIB_EDIT_FRAME::selectSymLibTable(), FOOTPRINT_VIEWER_FRAME::setCurFootprintName(), LIB_EDIT_FRAME::SetCurLib(), FOOTPRINT_VIEWER_FRAME::setCurNickname(), LIB_EDIT_FRAME::SetCurPart(), GERBVIEW_FRAME::SetPageSettings(), EE_INSPECTION_TOOL::ShowDatasheet(), DIALOG_CHOOSE_COMPONENT::ShowFootprintFor(), COMMON_CONTROL::ShowHelp(), LIB_VIEW_FRAME::ShowModal(), FOOTPRINT_VIEWER_FRAME::ShowModal(), SCH_EDIT_FRAME::ShowSchematicSetupDialog(), SIM_PLOT_FRAME::SIM_PLOT_FRAME(), LIB_MANAGER::symTable(), SYMBOL_TREE_SYNCHRONIZING_ADAPTER::Sync(), FOOTPRINT_EDIT_FRAME::SyncLibraryTree(), EDA_3D_VIEWER::takeScreenshot(), PANEL_SETUP_RULES::TransferDataFromWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), NETLIST_DIALOG::TransferDataFromWindow(), DIALOG_EDIT_COMPONENTS_LIBID::TransferDataFromWindow(), PANEL_SETUP_RULES::TransferDataToWindow(), DIALOG_FOOTPRINT_FP_EDITOR::TransferDataToWindow(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataToWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::UpdateFieldsFromLibrary(), DIALOG_PAGES_SETTINGS::UpdatePageLayoutExample(), FOOTPRINT_VIEWER_FRAME::UpdateTitle(), FOOTPRINT_EDIT_FRAME::updateTitle(), SCH_EDIT_FRAME::UpdateTitle(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::Validate(), SCH_EDIT_FRAME::WriteNetListFile(), DIALOG_FOOTPRINT_BOARD_EDITOR::~DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::~DIALOG_FOOTPRINT_FP_EDITOR(), and PCB_BASE_EDIT_FRAME::~PCB_BASE_EDIT_FRAME().

◆ ResetSize()

void DIALOG_SHIM::ResetSize ( )
protectedinherited

Clear the existing dialog size and position.

This will cause the dialog size to be clear so the next time the dialog is shown the sizers will layout the dialog accordingly. This useful when there are dialog windows that size changes due to layout dependency hidden controls.

Definition at line 242 of file dialog_shim.cpp.

243 {
244  const char* hash_key;
245 
246  if( m_hash_key.size() )
247  {
248  // a special case like EDA_LIST_DIALOG, which has multiple uses.
249  hash_key = m_hash_key.c_str();
250  }
251  else
252  {
253  hash_key = typeid(*this).name();
254  }
255 
256  RECT_MAP::iterator it = class_map.find( hash_key );
257 
258  if( it == class_map.end() )
259  return;
260 
261  EDA_RECT rect = it->second;
262  rect.SetSize( 0, 0 );
263  class_map[ hash_key ] = rect;
264 }
std::string m_hash_key
Definition: dialog_shim.h:198
static RECT_MAP class_map
void SetSize(const wxSize &size)
Definition: eda_rect.h:144
EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44

References class_map, DIALOG_SHIM::m_hash_key, and EDA_RECT::SetSize().

Referenced by DIALOG_EDIT_COMPONENT_IN_LIBRARY::DIALOG_EDIT_COMPONENT_IN_LIBRARY().

◆ SetError() [1/2]

void PAGED_DIALOG::SetError ( const wxString &  aMessage,
const wxString &  aPageName,
int  aCtrlId,
int  aRow = -1,
int  aCol = -1 
)
inherited

Definition at line 222 of file paged_dialog.cpp.

224 {
225  SetError( aMessage, FindWindow( aPageName ), FindWindow( aCtrlId ), aRow, aCol );
226 }
void SetError(const wxString &aMessage, const wxString &aPageName, int aCtrlId, int aRow=-1, int aCol=-1)

Referenced by PCB_EDIT_FRAME::ShowBoardSetupDialog(), PANEL_SETUP_LAYERS::testLayerNames(), PANEL_SETUP_RULES::TransferDataFromWindow(), PANEL_SETUP_TEXT_AND_GRAPHICS::validateData(), PANEL_MODEDIT_DEFAULTS::validateData(), PANEL_SETUP_TRACKS_AND_VIAS::validateData(), and PANEL_SETUP_NETCLASSES::validateNetclassName().

◆ SetError() [2/2]

void PAGED_DIALOG::SetError ( const wxString &  aMessage,
wxWindow *  aPage,
wxWindow *  aCtrl,
int  aRow = -1,
int  aCol = -1 
)
inherited

Definition at line 229 of file paged_dialog.cpp.

231 {
232  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
233  {
234  if( m_treebook->GetPage( i ) == aPage )
235  {
236  m_treebook->SetSelection( i );
237  break;
238  }
239  }
240 
241  // Once the page has been changed we want to wait for it to update before displaying
242  // the error dialog. So store the rest of the error info and wait for OnUpdateUI.
243  m_errorMessage = aMessage;
244  m_errorCtrl = aCtrl;
245  m_errorRow = aRow;
246  m_errorCol = aCol;
247 }
wxWindow * m_errorCtrl
Definition: paged_dialog.h:34
wxTreebook * m_treebook
Definition: paged_dialog.h:65
wxString m_errorMessage
Definition: paged_dialog.h:33

References PAGED_DIALOG::m_errorCol, PAGED_DIALOG::m_errorCtrl, PAGED_DIALOG::m_errorMessage, PAGED_DIALOG::m_errorRow, and PAGED_DIALOG::m_treebook.

◆ SetInitialFocus()

void DIALOG_SHIM::SetInitialFocus ( wxWindow *  aWindow)
inlineinherited

Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown.

Definition at line 114 of file dialog_shim.h.

115  {
116  m_initialFocusTarget = aWindow;
117  }
wxWindow * m_initialFocusTarget
Definition: dialog_shim.h:204

References DIALOG_SHIM::m_initialFocusTarget.

Referenced by DIALOG_BOM::DIALOG_BOM(), DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), DIALOG_CHOOSE_FOOTPRINT::DIALOG_CHOOSE_FOOTPRINT(), DIALOG_CONFIGURE_PATHS::DIALOG_CONFIGURE_PATHS(), DIALOG_EDIT_LINE_STYLE::DIALOG_EDIT_LINE_STYLE(), DIALOG_EDIT_SHEET_PIN::DIALOG_EDIT_SHEET_PIN(), DIALOG_FIELDS_EDITOR_GLOBAL::DIALOG_FIELDS_EDITOR_GLOBAL(), DIALOG_FIND::DIALOG_FIND(), DIALOG_FOOTPRINT_BOARD_EDITOR::DIALOG_FOOTPRINT_BOARD_EDITOR(), DIALOG_FOOTPRINT_FP_EDITOR::DIALOG_FOOTPRINT_FP_EDITOR(), DIALOG_FP_PLUGIN_OPTIONS::DIALOG_FP_PLUGIN_OPTIONS(), DIALOG_GRAPHIC_ITEM_PROPERTIES::DIALOG_GRAPHIC_ITEM_PROPERTIES(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_IMPORT_GFX::DIALOG_IMPORT_GFX(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_LIB_EDIT_DRAW_ITEM::DIALOG_LIB_EDIT_DRAW_ITEM(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), DIALOG_LIB_EDIT_TEXT::DIALOG_LIB_EDIT_TEXT(), DIALOG_PAD_PRIMITIVES_PROPERTIES::DIALOG_PAD_PRIMITIVES_PROPERTIES(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_SCH_FIND::DIALOG_SCH_FIND(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), DIALOG_EDIT_ONE_FIELD::init(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchAllClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchIDClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchRefClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchSelectedClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchValueClicked(), PANEL_FP_LIB_TABLE::PANEL_FP_LIB_TABLE(), PANEL_SYM_LIB_TABLE::PANEL_SYM_LIB_TABLE(), FOOTPRINT_EDIT_FRAME::SaveFootprintAs(), LIB_EDIT_FRAME::savePartAs(), DIALOG_KEEPOUT_AREA_PROPERTIES::TransferDataToWindow(), DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataToWindow(), and DIALOG_COPPER_ZONE::TransferDataToWindow().

◆ SetInitialPage()

void PAGED_DIALOG::SetInitialPage ( const wxString &  aPage,
const wxString &  aParentPage = wxEmptyString 
)
inherited

Definition at line 110 of file paged_dialog.cpp.

111 {
112  g_lastPage[ m_title ] = aPage;
113  g_lastParentPage[ m_title ] = aParentPage;
114 }
std::map< wxString, wxString > g_lastPage
std::map< wxString, wxString > g_lastParentPage
wxString m_title
Definition: paged_dialog.h:31

References g_lastPage, g_lastParentPage, and PAGED_DIALOG::m_title.

Referenced by PCB_EDIT_FRAME::ShowBoardSetupDialog(), and SCH_EDIT_FRAME::ShowSchematicSetupDialog().

◆ SetKiway()

void KIWAY_HOLDER::SetKiway ( wxWindow *  aDest,
KIWAY aKiway 
)
inherited

Function SetKiway.

Parameters
aDestis the recipient of aKiway pointer. It is only used for debugging, since "this" is not a wxWindow*. "this" is a KIWAY_HOLDER mix-in.
aKiwayis often from a parent window, or from KIFACE::CreateWindow().

Definition at line 42 of file kiway_holder.cpp.

43 {
44 #if defined(DEBUG)
45  // offer a trap point for debugging most any window
46  wxASSERT( aDest );
47  if( !strcmp( typeid(aDest).name(), "DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB" ) )
48  {
49  int breakhere=1;
50  (void) breakhere;
51  }
52 #endif
53 
54  (void) aDest;
55 
56  m_kiway = aKiway;
57 }
KIWAY * m_kiway
Definition: kiway_holder.h:81
const char * name
Definition: DXF_plotter.cpp:60

References KIWAY_HOLDER::m_kiway, and name.

Referenced by BM2CMP_FRAME::BM2CMP_FRAME(), PCB::IFACE::CreateWindow(), InvokePcbLibTableEditor(), PCB_CALCULATOR_FRAME::PCB_CALCULATOR_FRAME(), and SIM_PLOT_FRAME::SIM_PLOT_FRAME().

◆ SetSizeInDU()

void DIALOG_SHIM::SetSizeInDU ( int  x,
int  y 
)
protectedinherited

Set the dialog to the given dimensions in "dialog units".

These are units equivalent to 4* the average character width and 8* the average character height, allowing a dialog to be sized in a way that scales it with the system font.

Definition at line 156 of file dialog_shim.cpp.

157 {
158  wxSize sz( x, y );
159  SetSize( ConvertDialogToPixels( sz ) );
160 }

Referenced by DIALOG_RESCUE_EACH::DIALOG_RESCUE_EACH(), HTML_MESSAGE_BOX::HTML_MESSAGE_BOX(), and HTML_MESSAGE_BOX::SetDialogSizeInDU().

◆ Show()

bool DIALOG_SHIM::Show ( bool  show)
overrideinherited

Definition at line 183 of file dialog_shim.cpp.

184 {
185  bool ret;
186  const char* hash_key;
187 
188  if( m_hash_key.size() )
189  {
190  // a special case like EDA_LIST_DIALOG, which has multiple uses.
191  hash_key = m_hash_key.c_str();
192  }
193  else
194  {
195  hash_key = typeid(*this).name();
196  }
197 
198  // Show or hide the window. If hiding, save current position and size.
199  // If showing, use previous position and size.
200  if( show )
201  {
202 #ifndef __WINDOWS__
203  wxDialog::Raise(); // Needed on OS X and some other window managers (i.e. Unity)
204 #endif
205  ret = wxDialog::Show( show );
206 
207  // classname is key, returns a zeroed out default EDA_RECT if none existed before.
208  EDA_RECT savedDialogRect = class_map[ hash_key ];
209 
210  if( savedDialogRect.GetSize().x != 0 && savedDialogRect.GetSize().y != 0 )
211  {
212  SetSize( savedDialogRect.GetPosition().x,
213  savedDialogRect.GetPosition().y,
214  std::max( wxDialog::GetSize().x, savedDialogRect.GetSize().x ),
215  std::max( wxDialog::GetSize().y, savedDialogRect.GetSize().y ),
216  0 );
217  }
218 
219  // Be sure that the dialog appears in a visible area
220  // (the dialog position might have been stored at the time when it was
221  // shown on another display)
222  if( wxDisplay::GetFromWindow( this ) == wxNOT_FOUND )
223  Centre();
224  }
225  else
226  {
227  // Save the dialog's position & size before hiding, using classname as key
228  class_map[ hash_key ] = EDA_RECT( wxDialog::GetPosition(), wxDialog::GetSize() );
229 
230 #ifdef __WXMAC__
231  if ( m_eventLoop )
232  m_eventLoop->Exit( GetReturnCode() ); // Needed for APP-MODAL dlgs on OSX
233 #endif
234 
235  ret = wxDialog::Show( show );
236  }
237 
238  return ret;
239 }
std::string m_hash_key
Definition: dialog_shim.h:198
static RECT_MAP class_map
const wxPoint GetPosition() const
Definition: eda_rect.h:115
EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44
const wxSize GetSize() const
Definition: eda_rect.h:103

References class_map, EDA_RECT::GetPosition(), EDA_RECT::GetSize(), DIALOG_SHIM::m_hash_key, wxPoint::x, and wxPoint::y.

Referenced by DIALOG_SHIM::EndQuasiModal(), InvokeDialogERC(), SCH_EDIT_FRAME::OnAnnotate(), DIALOG_DRC::OnDRCItemDClick(), DIALOG_ERC::OnERCItemDClick(), DIALOG_CLEANUP_TRACKS_AND_VIAS::OnLeftDClickItem(), DIALOG_CLEANUP_GRAPHICS::OnLeftDClickItem(), POSITION_RELATIVE_TOOL::PositionRelative(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), DRC::ShowDRCDialog(), SCH_EDIT_FRAME::ShowFindReplaceDialog(), DIALOG_SHIM::ShowQuasiModal(), DIALOG_POSITION_RELATIVE::UpdateAnchor(), and SCH_EDIT_FRAME::UpdateHierarchyNavigator().

◆ ShowQuasiModal()

int DIALOG_SHIM::ShowQuasiModal ( )
inherited

Definition at line 343 of file dialog_shim.cpp.

344 {
345  // This is an exception safe way to zero a pointer before returning.
346  // Yes, even though DismissModal() clears this first normally, this is
347  // here in case there's an exception before the dialog is dismissed.
348  struct NULLER
349  {
350  void*& m_what;
351  NULLER( void*& aPtr ) : m_what( aPtr ) {}
352  ~NULLER() { m_what = 0; } // indeed, set it to NULL on destruction
353  } clear_this( (void*&) m_qmodal_loop );
354 
355  // release the mouse if it's currently captured as the window having it
356  // will be disabled when this dialog is shown -- but will still keep the
357  // capture making it impossible to do anything in the modal dialog itself
358  wxWindow* win = wxWindow::GetCapture();
359  if( win )
360  win->ReleaseMouse();
361 
362  // Get the optimal parent
363  wxWindow* parent = GetParentForModalDialog( GetParent(), GetWindowStyle() );
364 
365  // Show the optimal parent
366  DBG( if( parent ) printf( "%s: optimal parent: %s\n", __func__, typeid(*parent).name() );)
367 
368  wxASSERT_MSG( !m_qmodal_parent_disabler,
369  wxT( "Caller using ShowQuasiModal() twice on same window?" ) );
370 
371  // quasi-modal: disable only my "optimal" parent
373 
374 
375  // Apple in its infinite wisdom will raise a disabled window before even passing
376  // us the event, so we have no way to stop it. Instead, we must set an order on
377  // the windows so that the quasi-modal will be pushed in front of the disabled
378  // window when it is raised.
380 
381  Show( true );
382 
383  m_qmodal_showing = true;
384 
385  WX_EVENT_LOOP event_loop;
386 
387  m_qmodal_loop = &event_loop;
388 
389  event_loop.Run();
390 
391  m_qmodal_showing = false;
392 
393  return GetReturnCode();
394 }
bool m_qmodal_showing
Definition: dialog_shim.h:208
#define WX_EVENT_LOOP
Definition: kiway_player.h:41
WX_EVENT_LOOP * m_qmodal_loop
Definition: dialog_shim.h:206
bool Show(bool show) override
WDO_ENABLE_DISABLE * m_qmodal_parent_disabler
Definition: dialog_shim.h:209
Toggle a window's "enable" status to disabled, then enabled on destruction.
Definition: dialog_shim.cpp:38
#define DBG(x)
Definition: fctsys.h:33
void ReparentQuasiModal(wxNonOwnedWindow *aWindow)
Move a window's parent to be the top-level window and force the window to be on top.
Definition: gtk/ui.cpp:32

References DBG, DIALOG_SHIM::m_qmodal_loop, DIALOG_SHIM::m_qmodal_parent_disabler, DIALOG_SHIM::m_qmodal_showing, KIPLATFORM::UI::ReparentQuasiModal(), DIALOG_SHIM::Show(), and WX_EVENT_LOOP.

Referenced by LIB_EDIT_TOOL::editFieldProperties(), SCH_EDITOR_CONTROL::EditSymbolFields(), LIB_EDIT_TOOL::editSymbolProperties(), GLOBAL_EDIT_TOOL::EditTracksAndVias(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), PCB_EDIT_FRAME::InstallExchangeModuleFrame(), PCB_BASE_FRAME::InstallPadOptionsFrame(), InvokeDialogEditComponentsLibId(), InvokeDialogRescueEach(), InvokeDialogUpdateFields(), LIB_VIEW_FRAME::OnSelectSymbol(), SCH_EDIT_FRAME::OpenProjectFiles(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), SCH_EDITOR_CONTROL::RemapSymbols(), SCH_BASE_FRAME::SelectCompFromLibTree(), PCB_BASE_FRAME::SelectFootprintFromLibTree(), PCB_EDIT_FRAME::ShowBoardSetupDialog(), and SCH_EDIT_FRAME::ShowSchematicSetupDialog().

◆ TransferDataFromWindow()

bool PAGED_DIALOG::TransferDataFromWindow ( )
overrideprotectedinherited

Definition at line 199 of file paged_dialog.cpp.

200 {
201  // Call TransferDataFromWindow() only once:
202  // this is enough on wxWidgets 3.1
203  if( !DIALOG_SHIM::TransferDataFromWindow() )
204  return false;
205 
206  // On wxWidgets 3.0, TransferDataFromWindow() is not called recursively
207  // so we have to call it for each page
208 #if !wxCHECK_VERSION( 3, 1, 0 )
209  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
210  {
211  wxWindow* page = m_treebook->GetPage( i );
212 
213  if( !page->TransferDataFromWindow() )
214  return false;
215  }
216 #endif
217 
218  return true;
219 }
wxTreebook * m_treebook
Definition: paged_dialog.h:65

References PAGED_DIALOG::m_treebook.

◆ TransferDataToWindow()

bool PAGED_DIALOG::TransferDataToWindow ( )
overrideprotectedinherited

Definition at line 148 of file paged_dialog.cpp.

149 {
151 
152  // Call TransferDataToWindow() only once:
153  // this is enough on wxWidgets 3.1
154  if( !DIALOG_SHIM::TransferDataToWindow() )
155  return false;
156 
157  // On wxWidgets 3.0, TransferDataFromWindow() is not called recursively
158  // so we have to call it for each page
159 #if !wxCHECK_VERSION( 3, 1, 0 )
160  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
161  {
162  wxWindow* page = m_treebook->GetPage( i );
163 
164  if( !page->TransferDataToWindow() )
165  return false;
166  }
167 #endif
168 
169  // Search for a page matching the lastParentPageTitle/lastPageTitle hierarchy
170  wxString lastPage = g_lastPage[ m_title ];
171  wxString lastParentPage = g_lastParentPage[ m_title ];
172  int lastPageIndex = wxNOT_FOUND;
173 
174  for( size_t i = 0; i < m_treebook->GetPageCount(); ++i )
175  {
176  if( m_treebook->GetPageText( i ) == lastPage )
177  {
178  if( lastParentPage.IsEmpty() )
179  {
180  lastPageIndex = i;
181  break;
182  }
183 
184  if( m_treebook->GetPageParent( i ) >= 0
185  && m_treebook->GetPageText( (unsigned) m_treebook->GetPageParent( i ) ) == lastParentPage )
186  {
187  lastPageIndex = i;
188  break;
189  }
190  }
191  }
192 
193  m_treebook->SetSelection( (unsigned) std::max( 0, lastPageIndex ) );
194 
195  return true;
196 }
std::map< wxString, wxString > g_lastPage
std::map< wxString, wxString > g_lastParentPage
wxTreebook * m_treebook
Definition: paged_dialog.h:65
void finishInitialization()
wxString m_title
Definition: paged_dialog.h:31

References PAGED_DIALOG::finishInitialization(), g_lastPage, g_lastParentPage, PAGED_DIALOG::m_title, and PAGED_DIALOG::m_treebook.

◆ VertPixelsFromDU()

int DIALOG_SHIM::VertPixelsFromDU ( int  y)
protectedinherited

Convert an integer number of dialog units to pixels, vertically.

See SetSizeInDU or wxDialog documentation for more information.

Definition at line 170 of file dialog_shim.cpp.

171 {
172  wxSize sz( 0, y );
173  return ConvertDialogToPixels( sz ).y;
174 }

Referenced by DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT().

Member Data Documentation

◆ m_auxiliaryButton

wxButton* PAGED_DIALOG::m_auxiliaryButton
protectedinherited

Definition at line 66 of file paged_dialog.h.

Referenced by PAGED_DIALOG::PAGED_DIALOG(), and PAGED_DIALOG::~PAGED_DIALOG().

◆ m_constraints

PANEL_SETUP_FEATURE_CONSTRAINTS* DIALOG_BOARD_SETUP::m_constraints
protected

Definition at line 50 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnAuxiliaryAction().

◆ m_firstPaintEvent

bool DIALOG_SHIM::m_firstPaintEvent
protectedinherited

Definition at line 203 of file dialog_shim.h.

Referenced by DIALOG_SHIM::OnPaint().

◆ m_frame

PCB_EDIT_FRAME* DIALOG_BOARD_SETUP::m_frame
protected

Definition at line 48 of file dialog_board_setup.h.

Referenced by OnAuxiliaryAction().

◆ m_hash_key

◆ m_initialFocusTarget

wxWindow* DIALOG_SHIM::m_initialFocusTarget
protectedinherited

Definition at line 204 of file dialog_shim.h.

Referenced by DIALOG_SHIM::OnPaint(), and DIALOG_SHIM::SetInitialFocus().

◆ m_layers

PANEL_SETUP_LAYERS* DIALOG_BOARD_SETUP::m_layers
protected

Definition at line 51 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), OnAuxiliaryAction(), and OnPageChange().

◆ m_macHack

std::vector<bool> DIALOG_BOARD_SETUP::m_macHack
protected

Definition at line 61 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnPageChange().

◆ m_maskAndPaste

PANEL_SETUP_MASK_AND_PASTE* DIALOG_BOARD_SETUP::m_maskAndPaste
protected

Definition at line 56 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnAuxiliaryAction().

◆ m_netclasses

PANEL_SETUP_NETCLASSES* DIALOG_BOARD_SETUP::m_netclasses
protected

Definition at line 53 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnAuxiliaryAction().

◆ m_parentFrame

EDA_BASE_FRAME* DIALOG_SHIM::m_parentFrame
protectedinherited

Definition at line 211 of file dialog_shim.h.

Referenced by DIALOG_SHIM::OnCharHook(), and DIALOG_DRC::OnDRCItemRClick().

◆ m_physicalStackup

PANEL_SETUP_BOARD_STACKUP* DIALOG_BOARD_SETUP::m_physicalStackup
protected

Definition at line 57 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), OnAuxiliaryAction(), and OnPageChange().

◆ m_physicalStackupPage

int DIALOG_BOARD_SETUP::m_physicalStackupPage
private

Definition at line 67 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnPageChange().

◆ m_qmodal_loop

WX_EVENT_LOOP* DIALOG_SHIM::m_qmodal_loop
protectedinherited

Definition at line 206 of file dialog_shim.h.

Referenced by DIALOG_SHIM::EndQuasiModal(), and DIALOG_SHIM::ShowQuasiModal().

◆ m_qmodal_parent_disabler

WDO_ENABLE_DISABLE* DIALOG_SHIM::m_qmodal_parent_disabler
protectedinherited

◆ m_qmodal_showing

bool DIALOG_SHIM::m_qmodal_showing
protectedinherited

Definition at line 208 of file dialog_shim.h.

Referenced by DIALOG_SHIM::IsQuasiModal(), and DIALOG_SHIM::ShowQuasiModal().

◆ m_rules

PANEL_SETUP_RULES* DIALOG_BOARD_SETUP::m_rules
protected

Definition at line 54 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP().

◆ m_severities

PANEL_SETUP_SEVERITIES* DIALOG_BOARD_SETUP::m_severities
protected

Definition at line 58 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnAuxiliaryAction().

◆ m_tabOrder

◆ m_textAndGraphics

PANEL_SETUP_TEXT_AND_GRAPHICS* DIALOG_BOARD_SETUP::m_textAndGraphics
protected

Definition at line 52 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnAuxiliaryAction().

◆ m_textVars

PANEL_TEXT_VARIABLES* DIALOG_BOARD_SETUP::m_textVars
protected

Definition at line 59 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP().

◆ m_tracksAndVias

PANEL_SETUP_TRACKS_AND_VIAS* DIALOG_BOARD_SETUP::m_tracksAndVias
protected

Definition at line 55 of file dialog_board_setup.h.

Referenced by DIALOG_BOARD_SETUP(), and OnAuxiliaryAction().

◆ m_treebook

◆ m_units


The documentation for this class was generated from the following files: