KiCad PCB EDA Suite
COMMON_CONTROL Class Reference

COMMON_CONTROL. More...

#include <common_control.h>

Inheritance diagram for COMMON_CONTROL:
TOOL_INTERACTIVE TOOL_BASE

Public Types

enum  RESET_REASON { RUN, MODEL_RELOAD, GAL_SWITCH }
 

Determines the reason of reset for a tool

More...
 

Public Member Functions

 COMMON_CONTROL ()
 
 ~COMMON_CONTROL () override
 
void Reset (RESET_REASON aReason) override
 Function Reset() Brings the tool to a known, initial state. More...
 
int ConfigurePaths (const TOOL_EVENT &aEvent)
 
int ShowLibraryTable (const TOOL_EVENT &aEvent)
 
int ShowPlayer (const TOOL_EVENT &aEvent)
 
int ShowHelp (const TOOL_EVENT &aEvent)
 
int ListHotKeys (const TOOL_EVENT &aEvent)
 
int GetInvolved (const TOOL_EVENT &aEvent)
 
int ReportBug (const TOOL_EVENT &aEvent)
 
void setTransitions () override
 

Sets up handlers for various events.

More...
 
void Activate ()
 Function Activate() Runs the tool. More...
 
TOOL_MENUGetToolMenu ()
 
void SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Function SetContextMenu() More...
 
void RunMainStack (std::function< void()> aFunc)
 Function RunMainStack() More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Go() More...
 
TOOL_EVENTWait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Wait() More...
 
virtual bool Init ()
 Function Init() Init() is called once upon a registration of the tool. More...
 
TOOL_TYPE GetType () const
 Function GetType() Returns the type of the tool. More...
 
TOOL_ID GetId () const
 Function GetId() Returns the unique identifier of the tool. More...
 
const std::string & GetName () const
 Function GetName() Returns the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool. More...
 
bool IsToolActive () const
 

Protected Member Functions

void attachManager (TOOL_MANAGER *aManager)
 Function attachManager() More...
 
KIGFX::VIEWgetView () const
 Function getView() More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Function getViewControls() More...
 
template<typename T >
T * getEditFrame () const
 Function getEditFrame() More...
 
template<typename T >
T * getModel () const
 Function getModel() More...
 

Protected Attributes

TOOL_MENU m_menu
 functions below are not yet implemented - their interface may change More...
 
TOOL_TYPE m_type
 

Stores the type of the tool.

More...
 
TOOL_ID m_toolId
 

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

More...
 
std::string m_toolName
 

Name of the tool.

More...
 
TOOL_MANAGERm_toolMgr
 

Private Attributes

EDA_BASE_FRAMEm_frame
 

Pointer to the currently used edit frame.

More...
 

Static Private Attributes

static wxString m_bugReportUrl
 URL to launch a new issue with pre-populated description. More...
 
static wxString m_bugReportTemplate
 Issue template to use for reporting bugs (this should not be translated) More...
 

Detailed Description

COMMON_CONTROL.

Handles actions that are shared between different applications

Definition at line 37 of file common_control.h.

Member Enumeration Documentation

◆ RESET_REASON

enum TOOL_BASE::RESET_REASON
inherited

Determines the reason of reset for a tool

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

Definition at line 79 of file tool_base.h.

80  {
81  RUN,
82  MODEL_RELOAD,
83  GAL_SWITCH
84  };
Model changes (required full reload)
Definition: tool_base.h:82
Tool is invoked after being inactive.
Definition: tool_base.h:81
Rendering engine changes.
Definition: tool_base.h:83

Constructor & Destructor Documentation

◆ COMMON_CONTROL()

COMMON_CONTROL::COMMON_CONTROL ( )
inline

Definition at line 40 of file common_control.h.

40  :
41  TOOL_INTERACTIVE( "common.SuiteControl" ),
42  m_frame( nullptr )
43  { }
TOOL_INTERACTIVE(TOOL_ID aId, const std::string &aName)
Constructor.
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.

◆ ~COMMON_CONTROL()

COMMON_CONTROL::~COMMON_CONTROL ( )
inlineoverride

Definition at line 45 of file common_control.h.

45 { }

Member Function Documentation

◆ Activate()

void TOOL_INTERACTIVE::Activate ( )
inherited

Function Activate() Runs the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 51 of file tool_interactive.cpp.

52 {
54 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool InvokeTool(TOOL_ID aToolId)
Function InvokeTool() Calls a tool by sending a tool activation event to tool of given ID.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), EDIT_TOOL::copyToClipboard(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), PAD_TOOL::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::Move(), LIB_TREE::onContextMenu(), POINT_EDITOR::OnSelectionChange(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), DRC::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Function attachManager()

Sets the TOOL_MANAGER the tool will belong to. Called by TOOL_MANAGER::RegisterTool()

Definition at line 60 of file tool_base.cpp.

61 {
62  m_toolMgr = aManager;
63 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

◆ ConfigurePaths()

int COMMON_CONTROL::ConfigurePaths ( const TOOL_EVENT aEvent)

Definition at line 78 of file common_control.cpp.

79 {
80  // If _pcbnew.kiface is running have it put up the dialog so the 3D paths can also
81  // be edited
82  KIFACE* pcbnew = m_frame->Kiway().KiFACE( KIWAY::FACE_PCB, false );
83 
84  if( pcbnew )
85  {
86  try
87  {
89  }
90  catch( ... )
91  {
92  // Do nothing here.
93  // A error message is displayed after trying to load _pcbnew.kiface.
94  }
95 }
96  else
97  {
98  DIALOG_CONFIGURE_PATHS dlg( m_frame, nullptr );
99 
100  if( dlg.ShowModal() == wxID_OK )
102  }
103 
104 
105  return 0;
106 }
KIWAY & Kiway() const
Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in...
Definition: kiway_holder.h:56
VTBL_ENTRY void CommonSettingsChanged(bool aEnvVarsChanged)
Function CommonSettingsChanged Calls CommonSettingsChanged() on all KIWAY_PLAYERs.
Definition: kiway.cpp:472
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
VTBL_ENTRY wxWindow * CreateWindow(wxWindow *aParent, int aClassId, KIWAY *aKIWAY, int aCtlBits=0)=0
Function CreateWindow creates a wxWindow for the current project.
pcbnew DSO
Definition: kiway.h:282
VTBL_ENTRY KIFACE * KiFACE(FACE_T aFaceId, bool doLoad=true)
Function KiFACE returns the KIFACE* given a FACE_T.
Definition: kiway.cpp:178
KIFACE is used by a participant in the KIWAY alchemy.
Definition: kiway.h:150

References KIWAY::CommonSettingsChanged(), KIFACE::CreateWindow(), DIALOG_CONFIGUREPATHS, KIWAY::FACE_PCB, KIWAY::KiFACE(), KIWAY_HOLDER::Kiway(), and m_frame.

Referenced by setTransitions().

◆ getEditFrame()

template<typename T >
T* TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Function getEditFrame()

Returns the application window object, casted to requested user type.

Definition at line 187 of file tool_base.h.

188  {
189 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
190  wxASSERT( dynamic_cast<T*>( getToolHolderInt() ) );
191 #endif
192  return static_cast<T*>( getToolHolderInt() );
193  }
TOOLS_HOLDER * getToolHolderInt() const
Definition: tool_base.cpp:48

References TOOL_BASE::getToolHolderInt().

Referenced by ZONE_CREATE_HELPER::createNewZone().

◆ GetId()

TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Function GetId() Returns the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 121 of file tool_base.h.

122  {
123  return m_toolId;
124  }
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

◆ GetInvolved()

int COMMON_CONTROL::GetInvolved ( const TOOL_EVENT aEvent)

Definition at line 229 of file common_control.cpp.

230 {
231  if( !wxLaunchDefaultBrowser( URL_GET_INVOLVED ) )
232  {
233  wxString msg;
234  msg.Printf( _( "Could not launch the default browser.\n"
235  "For information on how to help the KiCad project, visit %s" ),
237  wxMessageBox( msg, _( "Get involved with KiCad" ), wxOK, m_frame );
238  }
239  return 0;
240 }
#define URL_GET_INVOLVED
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
#define _(s)
Definition: 3d_actions.cpp:33

References _, m_frame, and URL_GET_INVOLVED.

Referenced by setTransitions().

◆ GetManager()

TOOL_MANAGER* TOOL_BASE::GetManager ( ) const
inlineinherited

Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.

Returns
Instance of the TOOL_MANAGER. If there is no TOOL_MANAGER associated, it returns NULL.

Definition at line 143 of file tool_base.h.

144  {
145  return m_toolMgr;
146  }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_BASE::m_toolMgr.

Referenced by BOARD_COMMIT::BOARD_COMMIT(), ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), PCB_TOOL_BASE::doInteractiveItemPlacement(), ACTION_MENU::getToolManager(), LIB_TREE::onContextMenu(), ZONE_CREATE_HELPER::OnFirstPoint(), ACTION_MENU::OnMenuEvent(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ getModel()

template<typename T >
T* TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Function getModel()

Returns the model object if it matches the requested type.

Definition at line 201 of file tool_base.h.

202  {
203  EDA_ITEM* m = getModelInt();
204 #if !defined( QA_TEST ) // Dynamic casts give the linker a siezure in the test framework
205  wxASSERT( dynamic_cast<T*>( m ) );
206 #endif
207  return static_cast<T*>( m );
208  }
EDA_ITEM * getModelInt() const
Definition: tool_base.cpp:54
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: base_struct.h:159

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), ZONE_CREATE_HELPER::createZoneFromExisting(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ GetName()

const std::string& TOOL_BASE::GetName ( void  ) const
inlineinherited

Function GetName() Returns the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 132 of file tool_base.h.

133  {
134  return m_toolName;
135  }
std::string m_toolName
Name of the tool.
Definition: tool_base.h:218

References TOOL_BASE::m_toolName.

Referenced by TOOL_MANAGER::dispatchInternal(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), and TOOL_MANAGER::RegisterTool().

◆ GetToolMenu()

◆ GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Function GetType() Returns the type of the tool.

Returns
The type of the tool.

Definition at line 110 of file tool_base.h.

111  {
112  return m_type;
113  }
TOOL_TYPE m_type
Stores the type of the tool.
Definition: tool_base.h:211

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

◆ getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Function getView()

Returns the instance of VIEW object used in the application. It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 36 of file tool_base.cpp.

37 {
38  return m_toolMgr->GetView();
39 }
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:284
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), SCH_EDIT_TOOL::ChangeTextType(), EE_INSPECTION_TOOL::checkPart(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_EDIT_TOOL::DoDelete(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), MICROWAVE_TOOL::drawMicrowaveInductor(), PL_DRAWING_TOOLS::DrawShape(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_EDITOR_CONTROL::FindComponentAndItem(), EE_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCBNEW_CONTROL::GridResetOrigin(), PCBNEW_CONTROL::GridSetOrigin(), SELECTION_TOOL::GuessSelectionCandidates(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), PNS::TOOL_BASE::highlightNet(), PCB_INSPECTION_TOOL::highlightNet(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_MOVE_TOOL::moveItem(), PL_EDIT_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PNS::TOOL_BASE::pickSingleItem(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::Reset(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), DRAWING_TOOL::Reset(), EE_SELECTION_TOOL::Reset(), EE_TOOL_BASE< SCH_BASE_FRAME >::Reset(), SELECTION_TOOL::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), GERBVIEW_SELECTION_TOOL::selectable(), SELECTION_TOOL::Selectable(), PL_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectionContains(), SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::SelectPoint(), EE_SELECTION_TOOL::SelectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), PL_EDITOR_CONTROL::ToggleBackgroundColor(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), SCH_EDITOR_CONTROL::UpdateFind(), EE_POINT_EDITOR::updateItem(), PL_POINT_EDITOR::updateItem(), POINT_EDITOR::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_VIEWER_TOOLS::view(), PCB_TOOL_BASE::view(), COMMON_TOOLS::ZoomFitScreen(), SELECTION_TOOL::zoomFitSelection(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and SELECTION_TOOL::~SELECTION_TOOL().

◆ getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Function getViewControls()

Returns the instance of VIEW_CONTROLS object used in the application. It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.)

Returns
The instance of VIEW_CONTROLS.

Definition at line 42 of file tool_base.cpp.

43 {
44  return m_toolMgr->GetViewControls();
45 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:286

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), SCH_EDIT_TOOL::BreakWire(), PCB_TOOL_BASE::controls(), COMMON_TOOLS::CursorControl(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), LIB_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), PCB_INSPECTION_TOOL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::Move(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), LIB_DRAWING_TOOLS::PlaceAnchor(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), POINT_EDITOR::Reset(), DRAWING_TOOL::Reset(), COMMON_TOOLS::ResetLocalCoords(), GERBVIEW_SELECTION_TOOL::selectCursor(), SELECTION_TOOL::selectCursor(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCBNEW_PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), LIB_MOVE_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

◆ Go()

template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited

Function Go()

Defines which state (aStateFunc) to go when a certain event arrives (aConditions). No conditions means any event.

Definition at line 129 of file tool_interactive.h.

131 {
132  TOOL_STATE_FUNC sptr = std::bind( aStateFunc, static_cast<T*>( this ), std::placeholders::_1 );
133 
134  goInternal( sptr, aConditions );
135 }
std::function< int(const TOOL_EVENT &)> TOOL_STATE_FUNC
Definition: tool_base.h:58
void goInternal(TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)

References TOOL_INTERACTIVE::goInternal().

Referenced by LENGTH_TUNER_TOOL::setTransitions(), ZOOM_TOOL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), LIB_PIN_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), PL_DRAWING_TOOLS::setTransitions(), EE_POINT_EDITOR::setTransitions(), ZONE_FILLER_TOOL::setTransitions(), PL_POINT_EDITOR::setTransitions(), setTransitions(), KICAD_MANAGER_CONTROL::setTransitions(), LIB_MOVE_TOOL::setTransitions(), PCB_VIEWER_TOOLS::setTransitions(), POINT_EDITOR::setTransitions(), LIB_DRAWING_TOOLS::setTransitions(), SCH_MOVE_TOOL::setTransitions(), MICROWAVE_TOOL::setTransitions(), GLOBAL_EDIT_TOOL::setTransitions(), GERBVIEW_CONTROL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::setTransitions(), PL_EDITOR_CONTROL::setTransitions(), LIB_EDIT_TOOL::setTransitions(), LIB_CONTROL::setTransitions(), PL_EDIT_TOOL::setTransitions(), PAD_TOOL::setTransitions(), FOOTPRINT_EDITOR_TOOLS::setTransitions(), SCH_EDIT_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), PCBNEW_CONTROL::setTransitions(), COMMON_TOOLS::setTransitions(), PCB_INSPECTION_TOOL::setTransitions(), EDA_3D_CONTROLLER::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), SCH_LINE_WIRE_BUS_TOOL::setTransitions(), CVPCB_CONTROL::setTransitions(), CVPCB_ASSOCIATION_TOOL::setTransitions(), PCBNEW_PICKER_TOOL::setTransitions(), PICKER_TOOL::setTransitions(), PCB_EDITOR_CONTROL::setTransitions(), DRC::setTransitions(), EDIT_TOOL::setTransitions(), DRAWING_TOOL::setTransitions(), SELECTION_TOOL::setTransitions(), PL_SELECTION_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), and EE_SELECTION_TOOL::setTransitions().

◆ Init()

◆ IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 31 of file tool_base.cpp.

32 {
33  return m_toolMgr->IsToolActive( m_toolId );
34 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:214
bool IsToolActive(TOOL_ID aId) const
Function IsToolActive() Returns true if a tool with given id is active (executing)

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

◆ ListHotKeys()

int COMMON_CONTROL::ListHotKeys ( const TOOL_EVENT aEvent)

Definition at line 222 of file common_control.cpp.

223 {
225  return 0;
226 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
void DisplayHotkeyList(EDA_BASE_FRAME *aParent, TOOL_MANAGER *aToolManager)
Function DisplayHotkeyList Displays the current hotkey list.

References DisplayHotkeyList(), m_frame, and TOOL_BASE::m_toolMgr.

Referenced by setTransitions().

◆ ReportBug()

int COMMON_CONTROL::ReportBug ( const TOOL_EVENT aEvent)

Definition at line 243 of file common_control.cpp.

244 {
245  wxString version = GetVersionInfoData( m_frame->GetAboutTitle(), false, true );
246 
247  wxString message;
248  message.Printf( m_bugReportTemplate, version );
249 
250  KICAD_CURL_EASY kcurl;
251  wxString url_string;
252  url_string.Printf( m_bugReportUrl, kcurl.Escape( message.ToStdString() ) );
253 
254  wxLaunchDefaultBrowser( url_string );
255 
256  return 0;
257 }
wxString GetVersionInfoData(const wxString &aTitle, bool aHtml, bool aBrief)
Create a version info string for bug reports and the about dialog.
KICAD_CURL_EASY wrapper interface around the curl_easy API.
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
static wxString m_bugReportTemplate
Issue template to use for reporting bugs (this should not be translated)
std::string Escape(const std::string &aUrl)
Escapes a string for use as a URL.
const wxString & GetAboutTitle() const
static wxString m_bugReportUrl
URL to launch a new issue with pre-populated description.

References KICAD_CURL_EASY::Escape(), EDA_BASE_FRAME::GetAboutTitle(), GetVersionInfoData(), m_bugReportTemplate, m_bugReportUrl, and m_frame.

Referenced by setTransitions().

◆ Reset()

void COMMON_CONTROL::Reset ( RESET_REASON  aReason)
overridevirtual

Function Reset() Brings the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Implements TOOL_BASE.

Definition at line 72 of file common_control.cpp.

73 {
74  m_frame = getEditFrame<EDA_BASE_FRAME>();
75 }
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.

References m_frame.

◆ RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Function RunMainStack()

Calls a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 87 of file tool_interactive.cpp.

88 {
89  m_toolMgr->RunMainStack( this, std::move( aFunc ) );
90 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

◆ SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Function SetContextMenu()

Assigns a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 76 of file tool_interactive.cpp.

77 {
78  if( aMenu )
79  aMenu->SetTool( this );
80  else
81  aTrigger = CMENU_OFF;
82 
83  m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
84 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
void SetTool(TOOL_INTERACTIVE *aTool)
Function SetTool() Sets a tool that is the creator of the menu.
void ScheduleContextMenu(TOOL_BASE *aTool, ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Sets behaviour of the tool's context popup menu.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), TOOL_MENU::ShowContextMenu(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ setTransitions()

void COMMON_CONTROL::setTransitions ( )
overridevirtual

Sets up handlers for various events.

Implements TOOL_INTERACTIVE.

Definition at line 260 of file common_control.cpp.

261 {
269 
271  Go( &COMMON_CONTROL::ShowHelp, ACTIONS::help.MakeEvent() );
275 }
static TOOL_ACTION listHotKeys
Definition: actions.h:171
int ShowLibraryTable(const TOOL_EVENT &aEvent)
int ShowHelp(const TOOL_EVENT &aEvent)
static TOOL_ACTION reportBug
Definition: actions.h:173
static TOOL_ACTION showSymbolLibTable
Definition: actions.h:167
int ReportBug(const TOOL_EVENT &aEvent)
void Go(int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
Function Go()
static TOOL_ACTION showFootprintLibTable
Definition: actions.h:168
static TOOL_ACTION showFootprintBrowser
Definition: actions.h:154
int ConfigurePaths(const TOOL_EVENT &aEvent)
int GetInvolved(const TOOL_EVENT &aEvent)
int ListHotKeys(const TOOL_EVENT &aEvent)
static TOOL_ACTION showSymbolEditor
Definition: actions.h:153
int ShowPlayer(const TOOL_EVENT &aEvent)
static TOOL_ACTION help
Definition: actions.h:170
static TOOL_ACTION showSymbolBrowser
Definition: actions.h:152
static TOOL_ACTION getInvolved
Definition: actions.h:172
static TOOL_ACTION configurePaths
Definition: actions.h:166
static TOOL_ACTION gettingStarted
Definition: actions.h:169
static TOOL_ACTION showFootprintEditor
Definition: actions.h:155

References ConfigurePaths(), ACTIONS::configurePaths, GetInvolved(), ACTIONS::getInvolved, ACTIONS::gettingStarted, TOOL_INTERACTIVE::Go(), ACTIONS::help, ListHotKeys(), ACTIONS::listHotKeys, ReportBug(), ACTIONS::reportBug, ACTIONS::showFootprintBrowser, ACTIONS::showFootprintEditor, ACTIONS::showFootprintLibTable, ShowHelp(), ShowLibraryTable(), ShowPlayer(), ACTIONS::showSymbolBrowser, ACTIONS::showSymbolEditor, and ACTIONS::showSymbolLibTable.

◆ ShowHelp()

int COMMON_CONTROL::ShowHelp ( const TOOL_EVENT aEvent)

Definition at line 165 of file common_control.cpp.

166 {
167  const SEARCH_STACK& search = m_frame->sys_search();
168  wxString helpFile;
169  wxString msg;
170 
171  /* We have to get document for beginners,
172  * or the full specific doc
173  * if event id is wxID_INDEX, we want the document for beginners.
174  * else the specific doc file (its name is in Kiface().GetHelpFileName())
175  * The document for beginners is the same for all KiCad utilities
176  */
177  if( aEvent.IsAction( &ACTIONS::gettingStarted ) )
178  {
179  // List of possible names for Getting Started in KiCad
180  const wxChar* names[2] = {
181  wxT( "getting_started_in_kicad" ),
182  wxT( "Getting_Started_in_KiCad" )
183  };
184 
185  // Search for "getting_started_in_kicad.html" or "getting_started_in_kicad.pdf"
186  // or "Getting_Started_in_KiCad.html" or "Getting_Started_in_KiCad.pdf"
187  for( auto& name : names )
188  {
189  helpFile = SearchHelpFileFullPath( search, name );
190 
191  if( !helpFile.IsEmpty() )
192  break;
193  }
194 
195  if( !helpFile )
196  {
197  msg = wxString::Format( _( "Html or pdf help file \n%s\nor\n%s could not be found." ),
198  names[0], names[1] );
199  wxMessageBox( msg );
200  return -1;
201  }
202  }
203  else
204  {
205  wxString base_name = m_frame->help_name();
206 
207  helpFile = SearchHelpFileFullPath( search, base_name );
208 
209  if( !helpFile )
210  {
211  msg = wxString::Format( _( "Help file \"%s\" could not be found." ), base_name );
212  wxMessageBox( msg );
213  return -1;
214  }
215  }
216 
217  GetAssociatedDocument( m_frame, helpFile, &m_frame->Prj() );
218  return 0;
219 }
bool GetAssociatedDocument(wxWindow *aParent, const wxString &aDocName, PROJECT *aProject)
Function GetAssociatedDocument open a document (file) with the suitable browser.
Definition: eda_doc.cpp:80
wxString SearchHelpFileFullPath(const SEARCH_STACK &aSearchStack, const wxString &aBaseName)
Return the help file's full path.
SEARCH_STACK looks for files in a number of places.
Definition: search_stack.h:41
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
bool IsAction(const TOOL_ACTION *aAction) const
Function IsAction() Tests if the event contains an action issued upon activation of the given TOOL_AC...
Definition: tool_event.cpp:67
virtual const SEARCH_STACK & sys_search()
Return a SEARCH_STACK pertaining to entire program.
PROJECT & Prj() const
Function Prj returns a reference to the PROJECT "associated with" this KIWAY.
const char * name
Definition: DXF_plotter.cpp:60
void Format(OUTPUTFORMATTER *out, int aNestLevel, int aCtl, CPTREE &aTree)
Function Format outputs a PTREE into s-expression format via an OUTPUTFORMATTER derivative.
Definition: ptree.cpp:205
#define _(s)
Definition: 3d_actions.cpp:33
virtual wxString help_name()
static TOOL_ACTION gettingStarted
Definition: actions.h:169

References _, Format(), GetAssociatedDocument(), ACTIONS::gettingStarted, EDA_BASE_FRAME::help_name(), TOOL_EVENT::IsAction(), m_frame, name, KIWAY_HOLDER::Prj(), numEval::SearchHelpFileFullPath(), and EDA_BASE_FRAME::sys_search().

Referenced by setTransitions().

◆ ShowLibraryTable()

int COMMON_CONTROL::ShowLibraryTable ( const TOOL_EVENT aEvent)

Definition at line 109 of file common_control.cpp.

110 {
111  if( aEvent.IsAction( &ACTIONS::showSymbolLibTable ) )
112  {
113  try // Sch frame was not available, try to start it
114  {
116  kiface->CreateWindow( m_frame, DIALOG_SCH_LIBRARY_TABLE, &m_frame->Kiway() );
117  }
118  catch( ... )
119  {
120  // _eeschema.kiface is not available: it contains the library table dialog.
121  // Do nothing here.
122  // A error message is displayed after trying to load _eeschema.kiface.
123  }
124  }
125  else if( aEvent.IsAction( &ACTIONS::showFootprintLibTable ) )
126  {
127 
128  try // Pcb frame was not available, try to start it
129  {
131  kiface->CreateWindow( m_frame, DIALOG_PCB_LIBRARY_TABLE, &m_frame->Kiway() );
132  }
133  catch( ... )
134  {
135  // _pcbnew.kiface is not available: it contains the library table dialog.
136  // Do nothing here.
137  // A error message is displayed after trying to load _pcbnew.kiface.
138  }
139  }
140 
141  return 0;
142 }
BITMAP2CMP_SETTINGS kiface
KIWAY & Kiway() const
Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in...
Definition: kiway_holder.h:56
static TOOL_ACTION showSymbolLibTable
Definition: actions.h:167
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
bool IsAction(const TOOL_ACTION *aAction) const
Function IsAction() Tests if the event contains an action issued upon activation of the given TOOL_AC...
Definition: tool_event.cpp:67
static TOOL_ACTION showFootprintLibTable
Definition: actions.h:168
pcbnew DSO
Definition: kiway.h:282
VTBL_ENTRY KIFACE * KiFACE(FACE_T aFaceId, bool doLoad=true)
Function KiFACE returns the KIFACE* given a FACE_T.
Definition: kiway.cpp:178
eeschema DSO
Definition: kiway.h:281
KIFACE is used by a participant in the KIWAY alchemy.
Definition: kiway.h:150

References DIALOG_PCB_LIBRARY_TABLE, DIALOG_SCH_LIBRARY_TABLE, KIWAY::FACE_PCB, KIWAY::FACE_SCH, TOOL_EVENT::IsAction(), kiface, KIWAY::KiFACE(), KIWAY_HOLDER::Kiway(), m_frame, ACTIONS::showFootprintLibTable, and ACTIONS::showSymbolLibTable.

Referenced by setTransitions().

◆ ShowPlayer()

int COMMON_CONTROL::ShowPlayer ( const TOOL_EVENT aEvent)

Definition at line 145 of file common_control.cpp.

146 {
147  FRAME_T playerType = aEvent.Parameter<FRAME_T>();
148  KIWAY_PLAYER* editor = m_frame->Kiway().Player( playerType, true );
149 
150  // Needed on Windows, other platforms do not use it, but it creates no issue
151  if( editor->IsIconized() )
152  editor->Iconize( false );
153 
154  editor->Raise();
155 
156  // Raising the window does not set the focus on Linux. This should work on
157  // any platform.
158  if( wxWindow::FindFocus() != editor )
159  editor->SetFocus();
160 
161  return 0;
162 }
KIWAY_PLAYER is a wxFrame capable of the OpenProjectFiles function, meaning it can load a portion of ...
Definition: kiway_player.h:59
KIWAY & Kiway() const
Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in...
Definition: kiway_holder.h:56
FRAME_T
Enum FRAME_T is the set of EDA_BASE_FRAME derivatives, typically stored in EDA_BASE_FRAME::m_Ident.
Definition: frame_type.h:34
EDA_BASE_FRAME * m_frame
Pointer to the currently used edit frame.
VTBL_ENTRY KIWAY_PLAYER * Player(FRAME_T aFrameType, bool doCreate=true, wxTopLevelWindow *aParent=NULL)
Function Player returns the KIWAY_PLAYER* given a FRAME_T.
Definition: kiway.cpp:342
T Parameter() const
Function Parameter() Returns a non-standard parameter assigned to the event.
Definition: tool_event.h:435

References KIWAY_HOLDER::Kiway(), m_frame, TOOL_EVENT::Parameter(), and KIWAY::Player().

Referenced by setTransitions().

◆ Wait()

TOOL_EVENT * TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Function Wait()

Suspends execution of the tool until an event specified in aEventList arrives. No parameters means waiting for any event.

Definition at line 57 of file tool_interactive.cpp.

58 {
59  return m_toolMgr->ScheduleWait( this, aEventList );
60 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:219
TOOL_EVENT * ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pauses execution of a given tool until one or more events matching aConditions arrives.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), ROUTER_TOOL::InlineDrag(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::Move(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), EDIT_TOOL::pickCopyReferencePoint(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

Member Data Documentation

◆ m_bugReportTemplate

wxString COMMON_CONTROL::m_bugReportTemplate
staticprivate
Initial value:
=
"<!-- Before Creating a New Issue:\n"
"* Search the issue tracker to verify the issue has not already been reported.\n"
"* Only report one problem per issue. -->\n"
"\n"
"# Description\n"
"<!-- What is the current behavior and what is the expected behavior? -->\n"
"<!-- Please attach screenshots if they will help explain the problem. -->\n"
"\n"
"# Steps to reproduce\n"
"<!-- Please include a screen recording if it will help explain how to reproduce. -->\n"
"<!-- If this issue is specific to a project, please attach it. -->\n"
"1.\n"
"2.\n"
"# KiCad Version\n"
"\n"
"```\n"
"%s\n"
"```"

Issue template to use for reporting bugs (this should not be translated)

Definition at line 68 of file common_control.h.

Referenced by ReportBug().

◆ m_bugReportUrl

wxString COMMON_CONTROL::m_bugReportUrl
staticprivate
Initial value:
=
"https://gitlab.com/kicad/code/kicad/issues/new?issue[description]=%s"

URL to launch a new issue with pre-populated description.

Definition at line 67 of file common_control.h.

Referenced by ReportBug().

◆ m_frame

EDA_BASE_FRAME* COMMON_CONTROL::m_frame
private

Pointer to the currently used edit frame.

Definition at line 65 of file common_control.h.

Referenced by ConfigurePaths(), GetInvolved(), ListHotKeys(), ReportBug(), Reset(), ShowHelp(), ShowLibraryTable(), and ShowPlayer().

◆ m_menu

TOOL_MENU TOOL_INTERACTIVE::m_menu
protectedinherited

functions below are not yet implemented - their interface may change

Definition at line 108 of file tool_interactive.h.

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), TOOL_INTERACTIVE::GetToolMenu(), PICKER_TOOL::Init(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Init(), SCH_EDIT_TOOL::Init(), PL_EDIT_TOOL::Init(), LIB_DRAWING_TOOLS::Init(), FOOTPRINT_EDITOR_TOOLS::Init(), PCB_VIEWER_TOOLS::Init(), PL_DRAWING_TOOLS::Init(), LIB_CONTROL::Init(), PCB_EDITOR_CONTROL::Init(), SCH_DRAWING_TOOLS::Init(), EDA_3D_CONTROLLER::Init(), GERBVIEW_SELECTION_TOOL::Init(), PL_SELECTION_TOOL::Init(), DRAWING_TOOL::Init(), EE_SELECTION_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), EDIT_TOOL::Init(), SELECTION_TOOL::Init(), PCB_TOOL_BASE::Init(), PL_EDIT_TOOL::Main(), LIB_MOVE_TOOL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), EDA_3D_CONTROLLER::Main(), PICKER_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), PCB_VIEWER_TOOLS::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ m_toolId

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 214 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

◆ m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 219 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), PL_SELECTION_TOOL::AddItemsToSel(), EE_SELECTION_TOOL::AddItemsToSel(), PL_SELECTION_TOOL::AddItemToSel(), EE_SELECTION_TOOL::AddItemToSel(), SELECTION_TOOL::AddItemToSel(), CVPCB_ASSOCIATION_TOOL::Associate(), TOOL_BASE::attachManager(), SCH_EDIT_TOOL::AutoplaceFields(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), PCB_INSPECTION_TOOL::ClearHighlight(), SCH_EDITOR_CONTROL::ClearHighlight(), PL_SELECTION_TOOL::ClearSelection(), GERBVIEW_SELECTION_TOOL::clearSelection(), SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TOOL::ConvertDeMorgan(), LIB_EDIT_TOOL::Copy(), PL_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), MICROWAVE_TOOL::createInductorBetween(), PCB_INSPECTION_TOOL::CrossProbePcbToSch(), COMMON_TOOLS::CursorControl(), ROUTER_TOOL::CustomTrackWidthDialog(), SCH_EDITOR_CONTROL::Cut(), LIB_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), LIB_EDIT_TOOL::DoDelete(), SCH_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawRectangle(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), PCB_EDITOR_CONTROL::EditFpInFpEditor(), LIB_EDIT_TOOL::editGraphicProperties(), PAD_TOOL::EditPad(), LIB_EDIT_TOOL::editSymbolProperties(), SCH_EDITOR_CONTROL::EditWithLibEdit(), SCH_EDITOR_CONTROL::EnterSheet(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandConnection(), PAD_TOOL::explodePad(), SELECTION_TOOL::filterSelection(), SELECTION_TOOL::findCallback(), SCH_EDITOR_CONTROL::FindComponentAndItem(), POINT_EDITOR::finishItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getToolHolderInt(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), PCBNEW_CONTROL::GridSetOrigin(), GERBVIEW_CONTROL::HighlightControl(), PCB_INSPECTION_TOOL::HighlightItem(), PCB_INSPECTION_TOOL::HighlightNet(), PCB_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_INSPECTION_TOOL::HighlightNetTool(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), PL_EDIT_TOOL::ImportWorksheetContent(), LIB_EDIT_TOOL::Init(), PL_EDIT_TOOL::Init(), SCH_EDIT_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), PAD_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), PL_DRAWING_TOOLS::Init(), LIB_CONTROL::Init(), PL_POINT_EDITOR::Init(), POINT_EDITOR::Init(), PCB_EDITOR_CONTROL::Init(), POSITION_RELATIVE_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isInteractiveDragEnabled(), TOOL_BASE::IsToolActive(), SCH_EDITOR_CONTROL::LeaveSheet(), ListHotKeys(), PCB_INSPECTION_TOOL::LocalRatsnestTool(), PL_EDIT_TOOL::Main(), CVPCB_CONTROL::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), PCBNEW_PICKER_TOOL::Main(), PL_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::Move(), EDIT_TOOL::MoveExact(), LIB_CONTROL::OnDeMorgan(), COMMON_TOOLS::OnGridChanged(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), EDIT_TOOL::pickCopyReferencePoint(), LIB_EDIT_TOOL::PinTable(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), PCBNEW_CONTROL::Print(), GERBVIEW_CONTROL::Print(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EE_SELECTION_TOOL::RebuildSelection(), LIB_EDIT_TOOL::Redo(), SCH_EDITOR_CONTROL::Redo(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), PL_SELECTION_TOOL::RemoveItemFromSel(), EE_SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemFromSel(), PL_SELECTION_TOOL::RemoveItemsFromSel(), EE_SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_DRAWING_TOOLS::RepeatDrawItem(), EE_SELECTION_TOOL::RequestSelection(), SELECTION_TOOL::RequestSelection(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), TOOL_INTERACTIVE::RunMainStack(), DRC::RunTests(), EE_SELECTION_TOOL::SelectConnection(), PCB_TOOL_BASE::selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), SELECTION_TOOL::SelectItems(), PL_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectNet(), PL_SELECTION_TOOL::SelectPoint(), GERBVIEW_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::SelectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), SELECTION_TOOL::selectSameSheet(), SELECTION_TOOL::selectSheetContents(), DRAWING_TOOL::SetAnchor(), TOOL_INTERACTIVE::SetContextMenu(), DRC::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), EDA_3D_CONTROLLER::ToggleVisibility(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), LIB_DRAWING_TOOLS::TwoClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), LIB_EDIT_TOOL::Undo(), SCH_EDITOR_CONTROL::Undo(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SELECTION_TOOL::UnselectItems(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCBNEW_CONTROL::UpdateMessagePanel(), PCB_INSPECTION_TOOL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), PCB_EDITOR_CONTROL::ZoneDuplicate(), and PCB_EDITOR_CONTROL::ZoneMerge().

◆ m_toolName

std::string TOOL_BASE::m_toolName
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 218 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

◆ m_type

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Stores the type of the tool.

Definition at line 211 of file tool_base.h.

Referenced by TOOL_BASE::GetType(), and BOARD_COMMIT::Push().


The documentation for this class was generated from the following files: