KiCad PCB EDA Suite
BOARD_ITEM Class Referenceabstract

BOARD_ITEM is a base class for any item which can be embedded within the BOARD container class, and therefore instances of derived classes should only be found in Pcbnew or other programs that use class BOARD and its contents. More...

#include <class_board_item.h>

Inheritance diagram for BOARD_ITEM:
EDA_ITEM KIGFX::VIEW_ITEM BOARD_CONNECTED_ITEM BOARD_ITEM_CONTAINER DELETED_BOARD_ITEM DIMENSION DRAWSEGMENT KIGFX::ORIGIN_VIEWITEM MARKER_PCB NETINFO_ITEM PCB_TARGET TEXTE_MODULE TEXTE_PCB

Public Member Functions

 BOARD_ITEM (BOARD_ITEM *aParent, KICAD_T idtype)
 
virtual const wxPoint GetCenter () const
 Function GetCenter() More...
 
virtual void SetPosition (const wxPoint &aPos)=0
 
virtual bool IsConnected () const
 Function IsConnected() Returns information if the object is derived from BOARD_CONNECTED_ITEM. More...
 
virtual bool IsOnCopperLayer () const
 
BOARD_ITEM_CONTAINERGetParent () const
 
virtual PCB_LAYER_ID GetLayer () const
 Function GetLayer returns the primary layer this item is on. More...
 
virtual LSET GetLayerSet () const
 Function GetLayerSet returns a "layer mask", which is a bitmap of all layers on which the TRACK segment or VIA physically resides. More...
 
virtual void SetLayer (PCB_LAYER_ID aLayer)
 Function SetLayer sets the layer this item is on. More...
 
BOARD_ITEMDuplicate () const
 Function Duplicate creates a copy of a BOARD_ITEM. More...
 
virtual void SwapData (BOARD_ITEM *aImage)
 Swap data between aItem and aImage. More...
 
virtual bool IsOnLayer (PCB_LAYER_ID aLayer) const
 Function IsOnLayer tests to see if this object is on the given layer. More...
 
bool IsTrack () const
 Function IsTrack tests to see if this object is a track or via (or microvia). More...
 
virtual bool IsLocked () const
 Function IsLocked. More...
 
virtual void SetLocked (bool aLocked)
 Function SetLocked modifies 'lock' status for of the item. More...
 
void DeleteStructure ()
 Function DeleteStructure deletes this object after removing from its parent if it has one. More...
 
virtual void Move (const wxPoint &aMoveVector)
 Function Move move this object. More...
 
void Move (const VECTOR2I &aMoveVector)
 
virtual void Rotate (const wxPoint &aRotCentre, double aAngle)
 Function Rotate Rotate this object. More...
 
void Rotate (const VECTOR2I &aRotCentre, double aAngle)
 
virtual void Flip (const wxPoint &aCentre, bool aFlipLeftRight)
 Function Flip Flip this object, i.e. More...
 
void Flip (const VECTOR2I &aCentre, bool aFlipLeftRight)
 
virtual BOARDGetBoard () const
 Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none. More...
 
wxString GetLayerName () const
 Function GetLayerName returns the name of the PCB layer on which the item resides. More...
 
virtual void ViewGetLayers (int aLayers[], int &aCount) const override
 Function ViewGetLayers() Returns the all the layers within the VIEW the object is painted on. More...
 
virtual void TransformShapeWithClearanceToPolygon (SHAPE_POLY_SET &aCornerBuffer, int aClearanceValue, int aError=ARC_LOW_DEF, bool ignoreLineWidth=false) const
 Function TransformShapeWithClearanceToPolygon Convert the item shape to a closed polygon Used in filling zones calculations Circles and arcs are approximated by segments. More...
 
KICAD_T Type () const
 Function Type() More...
 
virtual void SetParent (EDA_ITEM *aParent)
 
bool IsModified () const
 
bool IsNew () const
 
bool IsMoving () const
 
bool IsDragging () const
 
bool IsWireImage () const
 
bool IsSelected () const
 
bool IsResized () const
 
bool IsBrightened () const
 
void SetWireImage ()
 
void SetSelected ()
 
void SetBrightened ()
 
void ClearSelected ()
 
void ClearBrightened ()
 
void SetModified ()
 
int GetState (int type) const
 
void SetState (int type, int state)
 
STATUS_FLAGS GetStatus () const
 
void SetStatus (STATUS_FLAGS aStatus)
 
void SetFlags (STATUS_FLAGS aMask)
 
void ClearFlags (STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
 
STATUS_FLAGS GetFlags () const
 
bool HasFlag (STATUS_FLAGS aFlag)
 
STATUS_FLAGS GetEditFlags () const
 
void ClearTempFlags ()
 
void ClearEditFlags ()
 
virtual bool IsType (const KICAD_T aScanTypes[]) const
 Function IsType Checks whether the item is one of the listed types. More...
 
void SetForceVisible (bool aEnable)
 Function SetForceVisible is used to set and cleag force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible. More...
 
bool IsForceVisible () const
 
virtual void GetMsgPanelInfo (EDA_DRAW_FRAME *aFrame, std::vector< MSG_PANEL_ITEM > &aList)
 Function GetMsgPanelInfo populates aList of MSG_PANEL_ITEM objects with it's internal state for display purposes. More...
 
virtual bool HitTest (const wxPoint &aPosition, int aAccuracy=0) const
 Function HitTest tests if aPosition is contained within or on the bounding box of an item. More...
 
virtual bool HitTest (const EDA_RECT &aRect, bool aContained, int aAccuracy=0) const
 Function HitTest tests if aRect intersects or is contained within the bounding box of an item. More...
 
virtual const EDA_RECT GetBoundingBox () const
 Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes. More...
 
virtual const wxPoint GetPosition () const
 
virtual const wxPoint GetFocusPosition () const
 Function GetFocusPosition similar to GetPosition, but allows items to return their visual center rather than their anchor. More...
 
virtual EDA_ITEMClone () const
 Function Clone creates a duplicate of this item with linked list members set to NULL. More...
 
virtual SEARCH_RESULT Visit (INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 Function Visit may be re-implemented for each derived class in order to handle all the types given by its member data. More...
 
virtual wxString GetClass () const =0
 Function GetClass returns the class name. More...
 
virtual wxString GetSelectMenuText (EDA_UNITS aUnits) const
 Function GetSelectMenuText returns the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position. More...
 
virtual BITMAP_DEF GetMenuImage () const
 Function GetMenuImage returns a pointer to an image to be used in menus. More...
 
virtual bool Matches (wxFindReplaceData &aSearchData, void *aAuxData)
 Function Matches compares the item against the search criteria in aSearchData. More...
 
virtual bool Replace (wxFindReplaceData &aSearchData, void *aAuxData=NULL)
 Function Replace performs a text replace using the find and replace criteria in aSearchData on items that support text find and replace. More...
 
virtual bool IsReplaceable () const
 Function IsReplaceable. More...
 
bool operator< (const EDA_ITEM &aItem) const
 Test if another item is less than this object. More...
 
virtual const BOX2I ViewBBox () const override
 Function ViewBBox() returns the bounding box of the item covering all its layers. More...
 
virtual void ViewDraw (int aLayer, VIEW *aView) const
 Function ViewDraw() Draws the parts of the object belonging to layer aLayer. More...
 
virtual unsigned int ViewGetLOD (int aLayer, VIEW *aView) const
 Function ViewGetLOD() Returns the level of detail (LOD) of the item. More...
 
VIEW_ITEM_DATA * viewPrivData () const
 
void ClearViewPrivData ()
 

Static Public Member Functions

static wxString ShowShape (STROKE_T aShape)
 Function ShowShape converts the enum STROKE_T integer value to a wxString. More...
 
template<class T >
static SEARCH_RESULT IterateForward (std::deque< T > &aList, INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T ) More...
 
template<class T >
static SEARCH_RESULT IterateForward (std::vector< T > &aList, INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T ) More...
 
static bool Replace (wxFindReplaceData &aSearchData, wxString &aText)
 Helper function used in search and replace dialog Function Replace performs a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace. More...
 
static bool Sort (const EDA_ITEM *aLeft, const EDA_ITEM *aRight)
 Function Sort is a helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers. More...
 

Public Attributes

const KIID m_Uuid
 

Static Public Attributes

static wxPoint ZeroOffset
 A value of wxPoint(0,0) which can be passed to the Draw() functions. More...
 

Protected Member Functions

bool Matches (const wxString &aText, wxFindReplaceData &aSearchData)
 Function Matches compares aText against search criteria in aSearchData. More...
 

Static Protected Member Functions

static wxString LayerMaskDescribe (const BOARD *aBoard, LSET aMask)
 Helper function Return a string (to be shown to the user) describing a layer mask. More...
 

Protected Attributes

PCB_LAYER_ID m_Layer
 
STATUS_FLAGS m_Status
 
EDA_ITEMm_Parent
 Linked list: Link (parent struct) More...
 
bool m_forceVisible
 
STATUS_FLAGS m_Flags
 

Detailed Description

BOARD_ITEM is a base class for any item which can be embedded within the BOARD container class, and therefore instances of derived classes should only be found in Pcbnew or other programs that use class BOARD and its contents.

The corresponding class in Eeschema is SCH_ITEM.

Definition at line 87 of file class_board_item.h.

Constructor & Destructor Documentation

◆ BOARD_ITEM()

BOARD_ITEM::BOARD_ITEM ( BOARD_ITEM aParent,
KICAD_T  idtype 
)
inline

Definition at line 93 of file class_board_item.h.

93  :
94  EDA_ITEM( aParent, idtype ), m_Layer( F_Cu )
95  {
96  }
PCB_LAYER_ID m_Layer
EDA_ITEM(EDA_ITEM *parent, KICAD_T idType)
Definition: base_struct.cpp:57

Member Function Documentation

◆ ClearBrightened()

void EDA_ITEM::ClearBrightened ( )
inlineinherited

◆ ClearEditFlags()

◆ ClearFlags()

void EDA_ITEM::ClearFlags ( STATUS_FLAGS  aMask = EDA_ITEM_ALL_FLAGS)
inlineinherited

Definition at line 233 of file base_struct.h.

233 { m_Flags &= ~aMask; }
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References EDA_ITEM::m_Flags.

Referenced by FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), PNS_KICAD_IFACE::AddItem(), SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_SCREEN::ClearAnnotation(), EDA_ITEM::ClearBrightened(), EDA_ITEM::ClearEditFlags(), clearModuleItemFlags(), EDA_ITEM::ClearSelected(), EDA_ITEM::ClearTempFlags(), SCH_EDIT_FRAME::ConvertPart(), LIB_EDIT_TOOL::Copy(), MICROWAVE_TOOL::createMicrowaveInductor(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), KIGFX::SCH_PAINTER::draw(), LIB_EDIT_TOOL::Duplicate(), SCH_ITEM::Duplicate(), PCB_EDIT_FRAME::Exchange_Module(), LIB_EDIT_FRAME::GetComponentFromRedoList(), LIB_EDIT_FRAME::GetComponentFromUndoList(), FOOTPRINT_EDITOR_TOOLS::ImportFootprint(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), FOOTPRINT_EDIT_FRAME::LoadModuleFromLibrary(), FOOTPRINT_EDIT_FRAME::OpenProjectFiles(), PCB_BASE_FRAME::PlaceModule(), LIB_PIN_TOOL::PlacePin(), DRAWING_TOOL::PlaceText(), FOOTPRINT_EDIT_FRAME::Process_Special_Functions(), BOARD_COMMIT::Push(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_PIN_TOOL::RepeatPin(), LIB_EDIT_FRAME::RollbackPartFromUndo(), SCH_EDIT_FRAME::SaveCopyForRepeatItem(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_SEXPR_PLUGIN_CACHE::savePin(), SCH_LEGACY_PLUGIN_CACHE::savePin(), EE_SELECTION_TOOL::SelectPoint(), SCH_EDIT_FRAME::SelectUnit(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ ClearSelected()

◆ ClearTempFlags()

void EDA_ITEM::ClearTempFlags ( )
inlineinherited

Definition at line 245 of file base_struct.h.

246  {
248  DO_NOT_DRAW );
249  }
#define IS_LINKED
Used in calculation to mark linked items (temporary use)
Definition: base_struct.h:114
#define TEMP_SELECTED
flag indicating that the structure has already selected
Definition: base_struct.h:125
#define SKIP_STRUCT
flag indicating that the structure should be ignored
Definition: base_struct.h:128
#define CANDIDATE
flag indicating that the structure is connected
Definition: base_struct.h:127
#define ENDPOINT
ends. (Used to support dragging.)
Definition: base_struct.h:123
void ClearFlags(STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
Definition: base_struct.h:233
#define DO_NOT_DRAW
Used to disable draw function.
Definition: base_struct.h:129
#define STARTPOINT
When a line is selected, these flags indicate which.
Definition: base_struct.h:122

References CANDIDATE, EDA_ITEM::ClearFlags(), DO_NOT_DRAW, ENDPOINT, IS_LINKED, SKIP_STRUCT, STARTPOINT, and TEMP_SELECTED.

Referenced by SCH_EDIT_FRAME::PutDataInPreviousState().

◆ ClearViewPrivData()

void KIGFX::VIEW_ITEM::ClearViewPrivData ( )
inlineinherited

Definition at line 153 of file view_item.h.

154  {
156  }
VIEW_ITEM_DATA * m_viewPrivData
Definition: view_item.h:161
#define NULL

References KIGFX::VIEW_ITEM::m_viewPrivData, and NULL.

Referenced by KIGFX::VIEW::OnDestroy().

◆ Clone()

EDA_ITEM * EDA_ITEM::Clone ( ) const
virtualinherited

Function Clone creates a duplicate of this item with linked list members set to NULL.

The default version will return NULL in release builds and likely crash the program. In debug builds, a warning message indicating the derived class has not implemented cloning. This really should be a pure virtual function. Due to the fact that there are so many objects derived from EDA_ITEM, the decision was made to return NULL until all the objects derived from EDA_ITEM implement cloning. Once that happens, this function should be made pure.

Returns
A clone of the item.

Reimplemented in MODULE_ZONE_CONTAINER, ZONE_CONTAINER, SCH_COMPONENT, MODULE, SCH_SHEET, D_PAD, SCH_HIERLABEL, LIB_PIN, VIA, SCH_GLOBALLABEL, SCH_LABEL, ARC, SCH_TEXT, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, SCH_LINE, TRACK, SCH_BUS_BUS_ENTRY, SCH_SHEET_PIN, SCH_FIELD, LIB_FIELD, SCH_BUS_WIRE_ENTRY, SCH_BITMAP, EDGE_MODULE, LIB_ARC, TEXTE_PCB, SCH_NO_CONNECT, SCH_JUNCTION, LIB_POLYLINE, SCH_MARKER, LIB_TEXT, PCB_TARGET, LIB_BEZIER, LIB_CIRCLE, LIB_RECTANGLE, and KIGFX::ORIGIN_VIEWITEM.

Definition at line 108 of file base_struct.cpp.

109 {
110  wxCHECK_MSG( false, NULL, wxT( "Clone not implemented in derived class " ) + GetClass() +
111  wxT( ". Bad programmer!" ) );
112 }
#define NULL
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References EDA_ITEM::GetClass(), and NULL.

Referenced by LIB_DRAWING_TOOLS::DrawShape(), LIB_EDIT_TOOL::Duplicate(), Duplicate(), SCH_ITEM::Duplicate(), LIB_PART::LIB_PART(), LIB_EDIT_FRAME::LoadOneSymbol(), new_clone(), LIB_PART::operator=(), LIB_EDIT_TOOL::Paste(), SCH_SEXPR_PLUGIN_CACHE::removeSymbol(), SCH_LEGACY_PLUGIN_CACHE::removeSymbol(), SCH_EDIT_FRAME::SaveCopyForRepeatItem(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), LIB_PART::SetConversion(), LIB_PART::SetUnitCount(), SCH_DRAWING_TOOLS::SingleClickPlace(), COMMIT::Stage(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ DeleteStructure()

void BOARD_ITEM::DeleteStructure ( )

Function DeleteStructure deletes this object after removing from its parent if it has one.

Definition at line 124 of file class_board_item.cpp.

125 {
126  auto parent = GetParent();
127 
128  if( parent )
129  parent->Remove( this );
130 
131  delete this;
132 }
BOARD_ITEM_CONTAINER * GetParent() const

References GetParent().

Referenced by BOARD::PadDelete(), and DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataFromWindow().

◆ Duplicate()

BOARD_ITEM* BOARD_ITEM::Duplicate ( ) const
inline

Function Duplicate creates a copy of a BOARD_ITEM.

Definition at line 170 of file class_board_item.h.

171  {
172  EDA_ITEM* dupe = Clone();
173  const_cast<KIID&>( dupe->m_Uuid ) = KIID();
174 
175  return static_cast<BOARD_ITEM*>( dupe );
176  }
virtual EDA_ITEM * Clone() const
Function Clone creates a duplicate of this item with linked list members set to NULL.
Definition: common.h:68
const KIID m_Uuid
Definition: base_struct.h:162
EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boards.
Definition: base_struct.h:159

References EDA_ITEM::Clone(), and EDA_ITEM::m_Uuid.

Referenced by FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), EDIT_TOOL::Duplicate(), GPCB_PLUGIN::FootprintLoad(), PCB_IO::FootprintLoad(), PCB_IO::FootprintSave(), ARRAY_CREATOR::Invoke(), and FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD().

◆ Flip() [1/2]

virtual void BOARD_ITEM::Flip ( const wxPoint aCentre,
bool  aFlipLeftRight 
)
inlinevirtual

Function Flip Flip this object, i.e.

change the board side for this object

Parameters
aCentre- the rotation point.
aFlipLeftRight- mirror across Y axis instead of X (the default)

Reimplemented in ZONE_CONTAINER, VIA, ARC, D_PAD, MODULE, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, TRACK, EDGE_MODULE, TEXTE_PCB, PCB_TARGET, and MARKER_PCB.

Definition at line 281 of file class_board_item.h.

282  {
283  wxMessageBox( wxT( "virtual BOARD_ITEM::Flip used, should not occur" ), GetClass() );
284  }
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References EDA_ITEM::GetClass().

Referenced by Flip(), and PCB_BASE_EDIT_FRAME::PutDataInPreviousState().

◆ Flip() [2/2]

void BOARD_ITEM::Flip ( const VECTOR2I aCentre,
bool  aFlipLeftRight 
)
inline

Definition at line 286 of file class_board_item.h.

287  {
288  Flip( wxPoint( aCentre.x, aCentre.y ), aFlipLeftRight );
289  }
virtual void Flip(const wxPoint &aCentre, bool aFlipLeftRight)
Function Flip Flip this object, i.e.

References Flip(), VECTOR2< T >::x, and VECTOR2< T >::y.

◆ GetBoard()

BOARD * BOARD_ITEM::GetBoard ( ) const
virtual

Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.

Definition at line 54 of file class_board_item.cpp.

55 {
56  if( Type() == PCB_T )
57  return (BOARD*) this;
58 
59  BOARD_ITEM* parent = GetParent();
60 
61  if( parent )
62  return parent->GetBoard();
63 
64  return NULL;
65 }
Definition: typeinfo.h:85
BOARD_ITEM is a base class for any item which can be embedded within the BOARD container class,...
#define NULL
virtual BOARD * GetBoard() const
Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.
BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:180
BOARD_ITEM_CONTAINER * GetParent() const
KICAD_T Type() const
Function Type()
Definition: base_struct.h:193

References GetBoard(), GetParent(), NULL, PCB_T, and EDA_ITEM::Type().

Referenced by D_PAD::BuildEffectiveShapes(), ZONE_CONTAINER::BuildSmoothedPoly(), DRC::checkClearanceSegmToPad(), TEXTE_PCB::Flip(), TRACK::Flip(), ARC::Flip(), VIA::Flip(), ZONE_CONTAINER::Flip(), GetBoard(), MODULE::GetBoundingPoly(), BOARD_CONNECTED_ITEM::GetClearance(), BOARD_CONNECTED_ITEM::GetEffectiveNetclass(), GetLayerName(), VIA::GetMinAnnulus(), PCB_DRAW_PANEL_GAL::GetMsgPanelInfo(), ZONE_CONTAINER::GetMsgPanelInfo(), TRACK::GetMsgPanelInfo(), NETINFO_ITEM::GetMsgPanelInfo(), VIA::GetMsgPanelInfo(), D_PAD::GetMsgPanelInfo(), TRACK::GetMsgPanelInfoBase_Common(), BOARD_CONNECTED_ITEM::GetNetClass(), BOARD_CONNECTED_ITEM::GetNetnameMsg(), GetRule(), VIA::GetSelectMenuText(), D_PAD::GetSelectMenuText(), ZONE_CONTAINER::GetSelectMenuText(), D_PAD::GetSolderMaskMargin(), D_PAD::GetSolderPasteMargin(), BOARD::GetTrackLength(), TRACK::GetWidthConstraints(), D_PAD::MergePrimitivesAsPolygon(), EAGLE_PLUGIN::packageWire(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), BOARD_CONNECTED_ITEM::SetNet(), BOARD_CONNECTED_ITEM::SetNetCode(), ZONE_CONTAINER::TransformOutlinesShapeWithClearanceToPolygon(), ZONE_CONTAINER::TransformSolidAreasShapesToPolygonSet(), MODULE::ViewBBox(), and D_PAD::ViewGetLOD().

◆ GetBoundingBox()

const EDA_RECT EDA_ITEM::GetBoundingBox ( ) const
virtualinherited

Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes.

This box should be an enclosing perimeter for visible components of this object, and the units should be in the pcb or schematic coordinate system. It is OK to overestimate the size by a few counts.

Reimplemented in BOARD, D_PAD, SCH_HIERLABEL, SCH_SHEET, SCH_GLOBALLABEL, SCH_COMPONENT, SCH_LABEL, WS_DRAW_ITEM_BITMAP, WS_DRAW_ITEM_TEXT, SCH_TEXT, WS_DRAW_ITEM_PAGE, DIMENSION, DRAWSEGMENT, GERBER_DRAW_ITEM, LIB_PART, WS_DRAW_ITEM_RECT, LIB_ITEM, TEXTE_MODULE, WS_DRAW_ITEM_POLYPOLYGONS, MODULE, LIB_FIELD, SCH_LINE, WS_DRAW_ITEM_LINE, TEXTE_PCB, TRACK, LIB_PIN, SCH_FIELD, ZONE_CONTAINER, SCH_BITMAP, MARKER_PCB, PCB_TARGET, WS_DRAW_ITEM_BASE, SCH_BUS_ENTRY_BASE, SCH_PIN, GBR_LAYOUT, LIB_POLYLINE, LIB_ARC, SCH_NO_CONNECT, LIB_TEXT, LIB_BEZIER, SCH_MARKER, LIB_RECTANGLE, SCH_JUNCTION, and LIB_CIRCLE.

Definition at line 95 of file base_struct.cpp.

96 {
97 #if defined(DEBUG)
98  printf( "Missing GetBoundingBox()\n" );
99  Show( 0, std::cout ); // tell me which classes still need GetBoundingBox support
100 #endif
101 
102  // return a zero-sized box per default. derived classes should override
103  // this
104  return EDA_RECT( wxPoint( 0, 0 ), wxSize( 0, 0 ) );
105 }
EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44

Referenced by CN_ITEM::BBox(), EE_RTREE::contains(), MODULE::CoverageRatio(), SELECTION::GetBoundingBox(), LIB_ITEM::GetBoundingBox(), GetBoundingBoxes(), GERBVIEW_SELECTION::GetCenter(), getRect(), EE_RTREE::insert(), SCH_EDIT_TOOL::Mirror(), SCH_EAGLE_PLUGIN::moveLabels(), EE_RTREE::remove(), GERBVIEW_SELECTION::ViewBBox(), and EDA_ITEM::ViewBBox().

◆ GetCenter()

virtual const wxPoint BOARD_ITEM::GetCenter ( ) const
inlinevirtual

Function GetCenter()

This defaults to the same point as returned by GetPosition(), unless overridden

Returns
centre point of the item

Reimplemented in DRAWSEGMENT.

Definition at line 109 of file class_board_item.h.

109 { return GetPosition(); }
virtual const wxPoint GetPosition() const
Definition: base_struct.h:337

References EDA_ITEM::GetPosition().

Referenced by BOARD_ADAPTER::createNewTrack(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically(), KIGFX::PCB_PAINTER::draw(), export_vrml_tracks(), PlotStandardLayer(), and TRACK::TransformShapeWithClearanceToPolygon().

◆ GetClass()

◆ GetEditFlags()

STATUS_FLAGS EDA_ITEM::GetEditFlags ( ) const
inlineinherited

Definition at line 237 of file base_struct.h.

238  {
239  constexpr int mask = ( IS_NEW | IS_PASTED | IS_MOVED | IS_RESIZED | IS_DRAGGED |
241 
242  return m_Flags & mask;
243  }
#define IS_NEW
New item, just created.
Definition: base_struct.h:117
#define IS_DRAGGED
Item being dragged.
Definition: base_struct.h:119
#define STRUCT_DELETED
flag indication structures to be erased
Definition: base_struct.h:126
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:121
STATUS_FLAGS m_Flags
Definition: base_struct.h:176
#define IS_RESIZED
Item being resized.
Definition: base_struct.h:118
#define IS_PASTED
Modifier on IS_NEW which indicates it came from clipboard.
Definition: base_struct.h:130
#define IS_MOVED
Item being moved.
Definition: base_struct.h:116

References IS_DRAGGED, IS_MOVED, IS_NEW, IS_PASTED, IS_RESIZED, IS_WIRE_IMAGE, EDA_ITEM::m_Flags, and STRUCT_DELETED.

Referenced by SCH_EDIT_TOOL::ChangeTextType(), EDA_ITEM::ClearEditFlags(), SCH_EDIT_FRAME::DeleteJunction(), SCH_EDIT_TOOL::editFieldText(), SCH_EDITOR_CONTROL::EditWithLibEdit(), SCH_COMPONENT::GetMsgPanelInfo(), LIB_MOVE_TOOL::Main(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), PAD_TOOL::recombinePad(), SCH_EDIT_FRAME::SchematicCleanUp(), SCH_EDIT_FRAME::SelectUnit(), DIALOG_TARGET_PROPERTIES::TransferDataFromWindow(), DIALOG_LIB_EDIT_PIN::TransferDataFromWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_LABEL_EDITOR::TransferDataFromWindow(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataFromWindow(), and SCH_EDIT_FRAME::TrimWire().

◆ GetFlags()

◆ GetFocusPosition()

virtual const wxPoint EDA_ITEM::GetFocusPosition ( ) const
inlinevirtualinherited

Function GetFocusPosition similar to GetPosition, but allows items to return their visual center rather than their anchor.

Reimplemented in DRAWSEGMENT, and TRACK.

Definition at line 344 of file base_struct.h.

344 { return GetPosition(); }
virtual const wxPoint GetPosition() const
Definition: base_struct.h:337

References EDA_ITEM::GetPosition().

Referenced by PCB_BASE_FRAME::FocusOnItem(), and SCH_EDIT_FRAME::FocusOnItem().

◆ GetLayer()

virtual PCB_LAYER_ID BOARD_ITEM::GetLayer ( ) const
inlinevirtual

Function GetLayer returns the primary layer this item is on.

Reimplemented in ZONE_CONTAINER.

Definition at line 142 of file class_board_item.h.

142 { return m_Layer; }
PCB_LAYER_ID m_Layer

References m_Layer.

Referenced by CN_LIST::Add(), BOARD_ADAPTER::AddGraphicsShapesWithClearanceToContainer(), DIMENSION::AdjustDimensionDetails(), GRAPHICS_CLEANER::areEquivalent(), AR_AUTOPLACER::buildFpAreas(), TRACKS_CLEANER::cleanupSegments(), CreateBoardSection(), MICROWAVE_TOOL::createMicrowaveInductor(), PCB_BASE_FRAME::CreateNewModule(), CreateRoutesSection(), DIALOG_GRAPHIC_ITEM_PROPERTIES::DIALOG_GRAPHIC_ITEM_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), DRC::doTrackDrc(), KIGFX::PCB_PAINTER::draw(), PCB_EDIT_FRAME::Exchange_Module(), export_vrml_drawsegment(), export_vrml_edge_module(), export_vrml_module(), export_vrml_pcbtext(), export_vrml_text_module(), export_vrml_tracks(), PCB_TARGET::Flip(), TEXTE_PCB::Flip(), EDGE_MODULE::Flip(), TRACK::Flip(), TEXTE_MODULE::Flip(), DIMENSION::Flip(), DRAWSEGMENT::Flip(), MODULE::Flip(), ARC::Flip(), PCB_IO::FootprintSave(), FootprintWriteShape(), PCB_IO::formatLayer(), DSN::SPECCTRA_DB::FromBOARD(), AR_AUTOPLACER::genModuleOnRoutingMatrix(), BOARD_CONNECTED_ITEM::GetClearance(), ZONE_CONTAINER::GetLayer(), DRC::GetLocation(), getMatchingTextItem(), AR_AUTOPLACER::getOptimalModulePlacement(), BOARD::GetPad(), TEXT_MOD_GRID_TABLE::GetValueAsLong(), SELECTION_TOOL::GuessSelectionCandidates(), idf_export_module(), GENERAL_COLLECTOR::Inspect(), PCB_LAYER_COLLECTOR::Inspect(), D_PAD::IsFlipped(), IsOnCopperLayer(), EDGE_MODULE::IsParentFlipped(), TEXTE_MODULE::IsParentFlipped(), itemIsIncludedByFilter(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), DIALOG_FOOTPRINT_FP_EDITOR::OnAddField(), DIALOG_FOOTPRINT_BOARD_EDITOR::OnAddField(), EAGLE_PLUGIN::packagePad(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotDrawSegment(), BRDITEMS_PLOTTER::PlotFootprintGraphicItem(), BRDITEMS_PLOTTER::PlotFootprintGraphicItems(), BRDITEMS_PLOTTER::PlotFootprintTextItems(), BRDITEMS_PLOTTER::PlotPcbTarget(), BRDITEMS_PLOTTER::PlotTextePcb(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), processTextItem(), PAD_TOOL::recombinePad(), SELECTION_TOOL::Selectable(), TEXT_MOD_GRID_TABLE::SetValueAsLong(), GLOBAL_EDIT_TOOL::swapBoardItem(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncGraphicalItem(), PNS_KICAD_IFACE_BASE::syncTrack(), DRC::testCopperDrawItem(), DRC::testCopperTextAndGraphics(), DRC::testDisabledLayers(), AR_AUTOPLACER::testModuleOnBoard(), TEXTE_MODULE::TEXTE_MODULE(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataToWindow(), DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataToWindow(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataToWindow(), BOARD_ADAPTER::transformGraphicModuleEdgeToPolygonSet(), MODULE::TransformGraphicShapesWithClearanceToPolygonSet(), TRACK::ViewGetLayers(), TEXTE_MODULE::ViewGetLayers(), TEXTE_MODULE::ViewGetLOD(), MODULE_ZONE_CONTAINER::ViewGetLOD(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::visitItem(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ GetLayerName()

wxString BOARD_ITEM::GetLayerName ( ) const

Function GetLayerName returns the name of the PCB layer on which the item resides.

Returns
wxString containing the layer name associated with this item.

Definition at line 68 of file class_board_item.cpp.

69 {
70  BOARD* board = GetBoard();
71 
72  if( board )
73  return board->GetLayerName( m_Layer );
74 
75  // If no parent, return standard name
77 }
const wxString GetLayerName(PCB_LAYER_ID aLayer) const
Function GetLayerName returns the name of a layer.
PCB_LAYER_ID m_Layer
virtual BOARD * GetBoard() const
Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.
BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:180
static wxString GetStandardLayerName(PCB_LAYER_ID aLayerId)
Function GetStandardLayerName returns an "English Standard" name of a PCB layer when given aLayerNumb...
Definition: class_board.h:648

References GetBoard(), BOARD::GetLayerName(), BOARD::GetStandardLayerName(), and m_Layer.

Referenced by PCB_IO::format(), PCB_IO::formatLayer(), TEXTE_PCB::GetMsgPanelInfo(), TEXTE_MODULE::GetMsgPanelInfo(), DRAWSEGMENT::GetMsgPanelInfo(), TEXTE_PCB::GetSelectMenuText(), EDGE_MODULE::GetSelectMenuText(), TRACK::GetSelectMenuText(), TEXTE_MODULE::GetSelectMenuText(), DIMENSION::GetSelectMenuText(), DRAWSEGMENT::GetSelectMenuText(), MODULE::GetSelectMenuText(), TEXTE_PCB::GetShownText(), TEXT_MOD_GRID_TABLE::GetValue(), MODULE::ResolveTextVar(), and DRC::testDisabledLayers().

◆ GetLayerSet()

virtual LSET BOARD_ITEM::GetLayerSet ( ) const
inlinevirtual

Function GetLayerSet returns a "layer mask", which is a bitmap of all layers on which the TRACK segment or VIA physically resides.

Returns
int - a layer mask, see layers_id_colors_visibility.h.

Reimplemented in VIA, D_PAD, and ZONE_CONTAINER.

Definition at line 150 of file class_board_item.h.

150 { return LSET( m_Layer ); }
PCB_LAYER_ID m_Layer
LSET is a set of PCB_LAYER_IDs.

References m_Layer.

Referenced by GRID_HELPER::BestSnapAnchor(), build_pad_testpoints(), DRC::doTrackDrc(), DRAWING_TOOL::DrawVia(), GetRule(), and hash_board_item().

◆ GetMenuImage()

BITMAP_DEF EDA_ITEM::GetMenuImage ( ) const
virtualinherited

Function GetMenuImage returns a pointer to an image to be used in menus.

The default version returns the right arrow image. Override this function to provide object specific menu images.

Returns
The menu image associated with the item.

Reimplemented in ZONE_CONTAINER, SCH_COMPONENT, MODULE, SCH_SHEET, D_PAD, SCH_HIERLABEL, LIB_PIN, VIA, SCH_GLOBALLABEL, SCH_LABEL, SCH_TEXT, GERBER_DRAW_ITEM, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, TRACK, SCH_BUS_BUS_ENTRY, SCH_LINE, SCH_SHEET_PIN, LIB_FIELD, SCH_FIELD, SCH_BUS_WIRE_ENTRY, EDGE_MODULE, SCH_BITMAP, LIB_ARC, TEXTE_PCB, LIB_POLYLINE, SCH_NO_CONNECT, LIB_TEXT, SCH_MARKER, PCB_TARGET, SCH_JUNCTION, MARKER_PCB, LIB_CIRCLE, and LIB_RECTANGLE.

Definition at line 233 of file base_struct.cpp.

234 {
235  return dummy_xpm;
236 }
static const BITMAP_OPAQUE dummy_xpm[1]
Definition: base_struct.cpp:54

References dummy_xpm.

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), and SELECTION_TOOL::doSelectionMenu().

◆ GetMsgPanelInfo()

virtual void EDA_ITEM::GetMsgPanelInfo ( EDA_DRAW_FRAME aFrame,
std::vector< MSG_PANEL_ITEM > &  aList 
)
inlinevirtualinherited

◆ GetParent()

BOARD_ITEM_CONTAINER* BOARD_ITEM::GetParent ( void  ) const
inline

Definition at line 136 of file class_board_item.h.

136 { return (BOARD_ITEM_CONTAINER*) m_Parent; }
EDA_ITEM * m_Parent
Linked list: Link (parent struct)
Definition: base_struct.h:174
Abstract interface for BOARD_ITEMs capable of storing other items inside.

References EDA_ITEM::m_Parent.

Referenced by POINT_EDITOR::addCorner(), ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), DeleteStructure(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsVertically(), KIGFX::PCB_PAINTER::draw(), EDIT_TOOL::Duplicate(), EditToolSelectionFilter(), PCB_IO::format(), FormatProbeItem(), GetBoard(), MARKER_PCB::GetColorLayer(), EDGE_MODULE::GetMsgPanelInfo(), EDGE_MODULE::GetSelectMenuText(), TEXTE_MODULE::GetSelectMenuText(), TEXTE_PCB::GetShownText(), TEXTE_MODULE::GetShownText(), SELECTION_TOOL::GuessSelectionCandidates(), GENERAL_COLLECTOR::Inspect(), ARRAY_CREATOR::Invoke(), EDGE_MODULE::IsParentFlipped(), TEXTE_MODULE::IsParentFlipped(), LEGACY_PLUGIN::loadMODULE_TEXT(), ALTIUM_PCB::ParseTexts6Data(), BRDITEMS_PLOTTER::PlotFootprintGraphicItem(), BRDITEMS_PLOTTER::PlotFootprintTextItem(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SELECTION_TOOL::select(), SELECTION_TOOL::Selectable(), SwapItemData(), DRC::testCopperDrawItem(), DIALOG_TEXT_PROPERTIES::TransferDataToWindow(), MARKER_PCB::ViewGetLayers(), MODULE_ZONE_CONTAINER::ViewGetLOD(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ GetPosition()

virtual const wxPoint EDA_ITEM::GetPosition ( ) const
inlinevirtualinherited

Reimplemented in SCH_COMPONENT, SCH_SHEET, LIB_PIN, VIA, WS_DRAW_ITEM_BITMAP, SCH_TEXT, BOARD, WS_DRAW_ITEM_TEXT, ARC, WS_DRAW_ITEM_PAGE, WS_DRAW_ITEM_RECT, SCH_LINE, MODULE, GERBER_DRAW_ITEM, SCH_FIELD, LIB_FIELD, WS_DRAW_ITEM_POLYPOLYGONS, D_PAD, SCH_BITMAP, WS_DRAW_ITEM_LINE, DRAWSEGMENT, SCH_BUS_ENTRY_BASE, DIMENSION, SCH_NO_CONNECT, TRACK, KIGFX::ORIGIN_VIEWITEM, NETINFO_ITEM, SCH_MARKER, SCH_JUNCTION, TEXTE_MODULE, LIB_POLYLINE, LIB_ARC, ZONE_CONTAINER, LIB_TEXT, SCH_PIN, LIB_BEZIER, TEXTE_PCB, LIB_RECTANGLE, LIB_CIRCLE, MARKER_PCB, and PCB_TARGET.

Definition at line 337 of file base_struct.h.

337 { return wxPoint(); }

Referenced by GRID_HELPER::computeAnchors(), SCH_EDIT_FRAME::DeleteJunction(), KIGFX::PCB_PAINTER::draw(), CONNECTION_GRAPH::ercCheckBusToBusConflicts(), CONNECTION_GRAPH::ercCheckBusToNetConflicts(), CONNECTION_GRAPH::ercCheckNoConnects(), SELECTION_TOOL::findCallback(), GERBVIEW_SELECTION::GetCenter(), GetCenter(), EDA_ITEM::GetFocusPosition(), SCH_FIELD::GetParentPosition(), POSITION_RELATIVE_TOOL::GetSelectionAnchorPosition(), SCH_SCREEN::GetSheets(), PCBNEW_SELECTION::GetTopLeftItem(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), EDIT_POINTS_FACTORY::Make(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_ITEM::operator<(), PL_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PCBNEW_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceImportedGraphics(), DRAWING_TOOL::PlaceText(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), SELECTION_TOOL::selectConnectedTracks(), RC_ITEM::ShowReport(), DRC::testDisabledLayers(), TransformItem(), DIALOG_POSITION_RELATIVE::UpdateAnchor(), LIB_MOVE_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), and EE_POINT_EDITOR::updatePoints().

◆ GetSelectMenuText()

wxString EDA_ITEM::GetSelectMenuText ( EDA_UNITS  aUnits) const
virtualinherited

Function GetSelectMenuText returns the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position.

The default version of this function raises an assertion in the debug mode and returns a string to indicate that it was not overridden to provide the object specific text.

Returns
The menu text string.

Reimplemented in ZONE_CONTAINER, SCH_COMPONENT, BOARD, MODULE, SCH_SHEET, D_PAD, SCH_HIERLABEL, LIB_PIN, VIA, SCH_GLOBALLABEL, SCH_LABEL, WS_DRAW_ITEM_BITMAP, SCH_TEXT, WS_DRAW_ITEM_TEXT, GERBER_DRAW_ITEM, DRAWSEGMENT, WS_DRAW_ITEM_PAGE, DIMENSION, WS_DRAW_ITEM_RECT, TEXTE_MODULE, TRACK, SCH_BUS_BUS_ENTRY, SCH_LINE, SCH_SHEET_PIN, LIB_FIELD, SCH_FIELD, WS_DRAW_ITEM_POLYPOLYGONS, SCH_BUS_WIRE_ENTRY, WS_DRAW_ITEM_LINE, EDGE_MODULE, LIB_ARC, SCH_BITMAP, TEXTE_PCB, LIB_POLYLINE, SCH_NO_CONNECT, LIB_TEXT, PCB_TARGET, SCH_MARKER, MARKER_PCB, LIB_CIRCLE, LIB_RECTANGLE, SCH_JUNCTION, SCH_PIN, DELETED_BOARD_ITEM, and DELETED_SHEET_ITEM.

Definition at line 134 of file base_struct.cpp.

135 {
136  wxFAIL_MSG( wxT( "GetSelectMenuText() was not overridden for schematic item type " ) +
137  GetClass() );
138 
139  return wxString( wxT( "Undefined menu text for " ) + GetClass() );
140 }
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References EDA_ITEM::GetClass().

Referenced by CONNECTION_GRAPH::buildConnectionGraph(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PL_SELECTION_TOOL::doSelectionMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), MARKER_PCB::GetMsgPanelInfo(), RC_TREE_MODEL::GetValue(), DRC_ITEM::ShowHtml(), RC_ITEM::ShowReport(), and DIALOG_POSITION_RELATIVE::UpdateAnchor().

◆ GetState()

int EDA_ITEM::GetState ( int  type) const
inlineinherited

Definition at line 216 of file base_struct.h.

217  {
218  return m_Status & type;
219  }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by TRACK::GetMsgPanelInfoBase_Common(), and TRACK::IsLocked().

◆ GetStatus()

STATUS_FLAGS EDA_ITEM::GetStatus ( ) const
inlineinherited

Definition at line 229 of file base_struct.h.

229 { return m_Status; }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by PCB_IO::format().

◆ HasFlag()

◆ HitTest() [1/2]

virtual bool EDA_ITEM::HitTest ( const wxPoint aPosition,
int  aAccuracy = 0 
) const
inlinevirtualinherited

◆ HitTest() [2/2]

virtual bool EDA_ITEM::HitTest ( const EDA_RECT aRect,
bool  aContained,
int  aAccuracy = 0 
) const
inlinevirtualinherited

Function HitTest tests if aRect intersects or is contained within the bounding box of an item.

Parameters
aRectA reference to a EDA_RECT object containing the rectangle to test.
aContainedSet to true to test for containment instead of an intersection.
aAccuracyIncrease aRect by this amount.
Returns
True if aRect contains or intersects the item bounding box.

Reimplemented in SCH_COMPONENT, SCH_SHEET, D_PAD, MODULE, VIA, ZONE_CONTAINER, WS_DRAW_ITEM_BITMAP, SCH_TEXT, ARC, WS_DRAW_ITEM_TEXT, GERBER_DRAW_ITEM, DRAWSEGMENT, DIMENSION, SCH_LINE, TEXTE_MODULE, LIB_ITEM, SCH_FIELD, TRACK, WS_DRAW_ITEM_POLYPOLYGONS, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_NO_CONNECT, TEXTE_PCB, SCH_JUNCTION, WS_DRAW_ITEM_BASE, PCB_TARGET, LIB_POLYLINE, LIB_ARC, LIB_BEZIER, LIB_TEXT, and LIB_CIRCLE.

Definition at line 321 of file base_struct.h.

322  {
323  return false; // derived classes should override this function
324  }

◆ IsBrightened()

bool EDA_ITEM::IsBrightened ( ) const
inlineinherited

◆ IsConnected()

virtual bool BOARD_ITEM::IsConnected ( ) const
inlinevirtual

Function IsConnected() Returns information if the object is derived from BOARD_CONNECTED_ITEM.

Returns
True if the object is of BOARD_CONNECTED_ITEM type, false otherwise.

Reimplemented in BOARD_CONNECTED_ITEM.

Definition at line 118 of file class_board_item.h.

119  {
120  return false;
121  }

Referenced by GetRule(), CN_CONNECTIVITY_ALGO::markItemNetAsDirty(), and CONNECTIVITY_DATA::MarkItemNetAsDirty().

◆ IsDragging()

bool EDA_ITEM::IsDragging ( ) const
inlineinherited

Definition at line 201 of file base_struct.h.

201 { return m_Flags & IS_DRAGGED; }
#define IS_DRAGGED
Item being dragged.
Definition: base_struct.h:119
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References IS_DRAGGED, and EDA_ITEM::m_Flags.

Referenced by DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::DIALOG_EDIT_COMPONENT_IN_SCHEMATIC(), and KIGFX::SCH_PAINTER::setDeviceColors().

◆ IsForceVisible()

bool EDA_ITEM::IsForceVisible ( ) const
inlineinherited

Definition at line 286 of file base_struct.h.

286 { return m_forceVisible; }
bool m_forceVisible
Definition: base_struct.h:175

References EDA_ITEM::m_forceVisible.

Referenced by KIGFX::SCH_PAINTER::draw(), and SCH_FIELD::Print().

◆ IsLocked()

virtual bool BOARD_ITEM::IsLocked ( ) const
inlinevirtual

Function IsLocked.

Returns
bool - true if the object is locked, else false

Reimplemented in MODULE, and TRACK.

Definition at line 215 of file class_board_item.h.

216  {
217  // only MODULEs & TRACKs can be locked at this time.
218  return false;
219  }

Referenced by PCBNEW_CONTROL::DeleteItemCursor(), EditToolSelectionFilter(), GENERAL_COLLECTOR::Inspect(), SELECTION_TOOL::itemPassesFilter(), and PCB_EDITOR_CONTROL::modifyLockSelected().

◆ IsModified()

bool EDA_ITEM::IsModified ( ) const
inlineinherited

Definition at line 198 of file base_struct.h.

198 { return m_Flags & IS_CHANGED; }
#define IS_CHANGED
std::function passed to nested users by ref, avoids copying std::function
Definition: base_struct.h:113
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References IS_CHANGED, and EDA_ITEM::m_Flags.

Referenced by PCB_EDIT_FRAME::OpenProjectFiles().

◆ IsMoving()

◆ IsNew()

◆ IsOnCopperLayer()

virtual bool BOARD_ITEM::IsOnCopperLayer ( ) const
inlinevirtual
Returns
true if the object is on any copper layer, false otherwise.

Reimplemented in TRACK, D_PAD, and ZONE_CONTAINER.

Definition at line 126 of file class_board_item.h.

127  {
128  return IsCopperLayer( GetLayer() );
129  }
bool IsCopperLayer(LAYER_NUM aLayerId)
Function IsCopperLayer tests whether a layer is a copper layer.
virtual PCB_LAYER_ID GetLayer() const
Function GetLayer returns the primary layer this item is on.

References GetLayer(), and IsCopperLayer().

Referenced by CN_CONNECTIVITY_ALGO::Add(), and BOARD_CONNECTED_ITEM::SetNetCode().

◆ IsOnLayer()

virtual bool BOARD_ITEM::IsOnLayer ( PCB_LAYER_ID  aLayer) const
inlinevirtual

Function IsOnLayer tests to see if this object is on the given layer.

Is virtual so objects like D_PAD, which reside on multiple layers can do their own form of testing.

Parameters
aLayerThe layer to test for.
Returns
bool - true if on given layer, else false.

Reimplemented in D_PAD, VIA, ZONE_CONTAINER, and MARKER_PCB.

Definition at line 195 of file class_board_item.h.

196  {
197  return m_Layer == aLayer;
198  }
PCB_LAYER_ID m_Layer

References m_Layer.

Referenced by BOARD_ADAPTER::createLayers(), and GENERAL_COLLECTOR::Inspect().

◆ IsReplaceable()

virtual bool EDA_ITEM::IsReplaceable ( ) const
inlinevirtualinherited

Function IsReplaceable.

Override this method in any derived object that supports test find and replace.

Returns
True if the item has replaceable text that can be modified using the find and replace dialog.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_LABEL, SCH_TEXT, SCH_SHEET_PIN, and SCH_FIELD.

Definition at line 501 of file base_struct.h.

501 { return false; }

Referenced by EDA_ITEM::Matches().

◆ IsResized()

bool EDA_ITEM::IsResized ( ) const
inlineinherited

Definition at line 204 of file base_struct.h.

204 { return m_Flags & IS_RESIZED; }
STATUS_FLAGS m_Flags
Definition: base_struct.h:176
#define IS_RESIZED
Item being resized.
Definition: base_struct.h:118

References IS_RESIZED, and EDA_ITEM::m_Flags.

Referenced by KIGFX::SCH_PAINTER::setDeviceColors().

◆ IsSelected()

◆ IsTrack()

bool BOARD_ITEM::IsTrack ( ) const
inline

Function IsTrack tests to see if this object is a track or via (or microvia).

form of testing.

Returns
bool - true if a track or via, else false.

Definition at line 206 of file class_board_item.h.

207  {
208  return ( Type() == PCB_TRACE_T ) || ( Type() == PCB_VIA_T );
209  }
class TRACK, a track segment (segment on a copper layer)
Definition: typeinfo.h:96
class VIA, a via (like a track segment on a copper layer)
Definition: typeinfo.h:97
KICAD_T Type() const
Function Type()
Definition: base_struct.h:193

References PCB_TRACE_T, PCB_VIA_T, and EDA_ITEM::Type().

◆ IsType()

virtual bool EDA_ITEM::IsType ( const KICAD_T  aScanTypes[]) const
inlinevirtualinherited

Function IsType Checks whether the item is one of the listed types.

Parameters
aScanTypesList of item types
Returns
true if the item type is contained in the list aScanTypes

Reimplemented in SCH_LABEL, VIA, DIMENSION, D_PAD, DRAWSEGMENT, TEXTE_MODULE, SCH_FIELD, SCH_LINE, EDGE_MODULE, and TEXTE_PCB.

Definition at line 262 of file base_struct.h.

263  {
264  if( aScanTypes[0] == SCH_LOCATE_ANY_T )
265  return true;
266 
267  for( const KICAD_T* p = aScanTypes; *p != EOT; ++p )
268  {
269  if( m_StructType == *p )
270  return true;
271  }
272 
273  return false;
274  }
KICAD_T m_StructType
Run time identification, keep private so it can never be changed after a constructor sets it.
Definition: base_struct.h:170
search types array terminator (End Of Types)
Definition: typeinfo.h:82
KICAD_T
Enum KICAD_T is the set of class identification values, stored in EDA_ITEM::m_StructType.
Definition: typeinfo.h:78

References EOT, EDA_ITEM::m_StructType, and SCH_LOCATE_ANY_T.

Referenced by GetRule(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingBus(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLine(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingWire(), TEXTE_PCB::IsType(), EDGE_MODULE::IsType(), SCH_LINE::IsType(), SCH_FIELD::IsType(), TEXTE_MODULE::IsType(), DRAWSEGMENT::IsType(), D_PAD::IsType(), DIMENSION::IsType(), VIA::IsType(), SCH_LABEL::IsType(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), EE_SELECTION_TOOL::RequestSelection(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), EDA_ITEM::Visit(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ IsWireImage()

bool EDA_ITEM::IsWireImage ( ) const
inlineinherited

Definition at line 202 of file base_struct.h.

202 { return m_Flags & IS_WIRE_IMAGE; }
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:121
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References IS_WIRE_IMAGE, and EDA_ITEM::m_Flags.

◆ IterateForward() [1/2]

template<class T >
static SEARCH_RESULT EDA_ITEM::IterateForward ( std::deque< T > &  aList,
INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
inlinestaticinherited

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

This changes first parameter to avoid the DList and use the main queue instead

Definition at line 383 of file base_struct.h.

387  {
388  for( auto it : aList )
389  {
390  if( static_cast<EDA_ITEM*>( it )->Visit( inspector, testData, scanTypes )
392  return SEARCH_RESULT::QUIT;
393  }
394 
396  }
virtual SEARCH_RESULT Visit(INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
Function Visit may be re-implemented for each derived class in order to handle all the types given by...

References CONTINUE, QUIT, and EDA_ITEM::Visit().

Referenced by GERBER_FILE_IMAGE::Visit(), and BOARD::Visit().

◆ IterateForward() [2/2]

template<class T >
static SEARCH_RESULT EDA_ITEM::IterateForward ( std::vector< T > &  aList,
INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
inlinestaticinherited

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

IterateForward( EDA_ITEM*, INSPECTOR, void*, const KICAD_T )

This changes first parameter to avoid the DList and use std::vector instead

Definition at line 404 of file base_struct.h.

406  {
407  for( auto it : aList )
408  {
409  if( static_cast<EDA_ITEM*>( it )->Visit( inspector, testData, scanTypes )
411  return SEARCH_RESULT::QUIT;
412  }
413 
415  }
virtual SEARCH_RESULT Visit(INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
Function Visit may be re-implemented for each derived class in order to handle all the types given by...

References CONTINUE, QUIT, and EDA_ITEM::Visit().

◆ LayerMaskDescribe()

wxString BOARD_ITEM::LayerMaskDescribe ( const BOARD aBoard,
LSET  aMask 
)
staticprotected

Helper function Return a string (to be shown to the user) describing a layer mask.

The BOARD is needed because layer names are (somewhat) customizable

Definition at line 80 of file class_board_item.cpp.

81 {
82  // Try to be smart and useful. Check all copper first.
83  if( aMask[F_Cu] && aMask[B_Cu] )
84  return _( "All copper layers" );
85 
86  // Check for copper.
87  auto layer = aBoard->GetEnabledLayers().AllCuMask() & aMask;
88 
89  for( int i = 0; i < 3; i++ )
90  {
91  for( int bit = PCBNEW_LAYER_ID_START; bit < PCB_LAYER_ID_COUNT; ++bit )
92  {
93  if( layer[ bit ] )
94  {
95  wxString layerInfo = aBoard->GetLayerName( static_cast<PCB_LAYER_ID>( bit ) );
96 
97  if( aMask.count() > 1 )
98  layerInfo << _( " and others" );
99 
100  return layerInfo;
101  }
102  }
103 
104  // No copper; first, check for technicals and then for all layers.
105  if( i < 1 ) // first, check for technicals
106  layer = aBoard->GetEnabledLayers().AllTechMask() & aMask;
107  else // then check for all other layers
108  layer = aMask;
109  }
110 
111  // No copper, no technicals: no layer
112  return _( "no layers" );
113 }
static LSET AllCuMask(int aCuLayerCount=MAX_CU_LAYERS)
Function AllCuMask returns a mask holding the requested number of Cu PCB_LAYER_IDs.
Definition: lset.cpp:712
const wxString GetLayerName(PCB_LAYER_ID aLayer) const
Function GetLayerName returns the name of a layer.
LSET GetEnabledLayers() const
Function GetEnabledLayers is a proxy function that calls the corresponding function in m_BoardSetting...
static LSET AllTechMask()
Function AllTechMask returns a mask holding all technical layers (no CU layer) on both side.
Definition: lset.cpp:782
#define _(s)
Definition: 3d_actions.cpp:33

References _, LSET::AllCuMask(), LSET::AllTechMask(), B_Cu, F_Cu, BOARD::GetEnabledLayers(), BOARD::GetLayerName(), PCB_LAYER_ID_COUNT, and PCBNEW_LAYER_ID_START.

Referenced by D_PAD::GetMsgPanelInfo(), and D_PAD::GetSelectMenuText().

◆ Matches() [1/2]

virtual bool EDA_ITEM::Matches ( wxFindReplaceData &  aSearchData,
void *  aAuxData 
)
inlinevirtualinherited

Function Matches compares the item against the search criteria in aSearchData.

The base class returns false since many of the objects derived from EDA_ITEM do not have any text to search.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search criteria.
aAuxDataA pointer to optional data required for the search or NULL if not used.
Returns
True if the item's text matches the search criteria in aSearchData.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_SHEET_PIN, SCH_FIELD, LIB_PIN, SCH_PIN, TEXTE_MODULE, SCH_MARKER, MARKER_PCB, and TEXTE_PCB.

Definition at line 457 of file base_struct.h.

458  {
459  return false;
460  }

Referenced by SCH_EDITOR_CONTROL::HasMatch(), TEXTE_PCB::Matches(), MARKER_PCB::Matches(), SCH_MARKER::Matches(), TEXTE_MODULE::Matches(), LIB_PIN::Matches(), SCH_FIELD::Matches(), SCH_SHEET_PIN::Matches(), SCH_TEXT::Matches(), and SCH_EDITOR_CONTROL::ReplaceAndFindNext().

◆ Matches() [2/2]

bool EDA_ITEM::Matches ( const wxString &  aText,
wxFindReplaceData &  aSearchData 
)
protectedinherited

Function Matches compares aText against search criteria in aSearchData.

This is a helper function for simplify derived class logic.

Parameters
aTextA reference to a wxString object containing the string to test.
aSearchDataThe criteria to search against.
Returns
True if aText matches the search criteria in aSearchData.

Definition at line 143 of file base_struct.cpp.

144 {
145  wxString text = aText;
146  wxString searchText = aSearchData.GetFindString();
147 
148  // Don't match if searching for replaceable item and the item doesn't support text replace.
149  if( (aSearchData.GetFlags() & FR_SEARCH_REPLACE) && !IsReplaceable() )
150  return false;
151 
152  if( aSearchData.GetFlags() & wxFR_WHOLEWORD )
153  return aText.IsSameAs( searchText, aSearchData.GetFlags() & wxFR_MATCHCASE );
154 
155  if( aSearchData.GetFlags() & FR_MATCH_WILDCARD )
156  {
157  if( aSearchData.GetFlags() & wxFR_MATCHCASE )
158  return text.Matches( searchText );
159 
160  return text.MakeUpper().Matches( searchText.MakeUpper() );
161  }
162 
163  if( aSearchData.GetFlags() & wxFR_MATCHCASE )
164  return aText.Find( searchText ) != wxNOT_FOUND;
165 
166  return text.MakeUpper().Find( searchText.MakeUpper() ) != wxNOT_FOUND;
167 }
virtual bool IsReplaceable() const
Function IsReplaceable.
Definition: base_struct.h:501

References FR_MATCH_WILDCARD, FR_SEARCH_REPLACE, and EDA_ITEM::IsReplaceable().

◆ Move() [1/2]

virtual void BOARD_ITEM::Move ( const wxPoint aMoveVector)
inlinevirtual

Function Move move this object.

Parameters
aMoveVector- the move vector for this object.

Reimplemented in D_PAD, ZONE_CONTAINER, BOARD, ARC, MODULE, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, TRACK, TEXTE_PCB, EDGE_MODULE, PCB_TARGET, and MARKER_PCB.

Definition at line 248 of file class_board_item.h.

249  {
250  wxFAIL_MSG( wxString::Format( wxT( "virtual BOARD_ITEM::Move called for %s" ),
251  GetClass() ) );
252  }
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void Format(OUTPUTFORMATTER *out, int aNestLevel, int aCtl, CPTREE &aTree)
Function Format outputs a PTREE into s-expression format via an OUTPUTFORMATTER derivative.
Definition: ptree.cpp:205

References Format(), and EDA_ITEM::GetClass().

Referenced by ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsVertically(), EDIT_TOOL::Move(), Move(), BOARD::Move(), EDIT_TOOL::MoveExact(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), CLIPBOARD_IO::SaveSelection(), and TransformItem().

◆ Move() [2/2]

void BOARD_ITEM::Move ( const VECTOR2I aMoveVector)
inline

Definition at line 254 of file class_board_item.h.

255  {
256  Move( wxPoint( aMoveVector.x, aMoveVector.y ) );
257  }
virtual void Move(const wxPoint &aMoveVector)
Function Move move this object.

References Move(), VECTOR2< T >::x, and VECTOR2< T >::y.

◆ operator<()

bool EDA_ITEM::operator< ( const EDA_ITEM aItem) const
inherited

Test if another item is less than this object.

Parameters
aItem- Item to compare against.
Returns
- True if aItem is less than the item.

Definition at line 197 of file base_struct.cpp.

198 {
199  wxFAIL_MSG( wxString::Format( wxT( "Less than operator not defined for item type %s." ),
200  GetChars( GetClass() ) ) );
201 
202  return false;
203 }
static const wxChar * GetChars(const wxString &s)
Function GetChars returns a wxChar* to the actual wxChar* data within a wxString, and is helpful for ...
Definition: macros.h:153
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void Format(OUTPUTFORMATTER *out, int aNestLevel, int aCtl, CPTREE &aTree)
Function Format outputs a PTREE into s-expression format via an OUTPUTFORMATTER derivative.
Definition: ptree.cpp:205

References Format(), GetChars(), and EDA_ITEM::GetClass().

◆ Replace() [1/2]

bool EDA_ITEM::Replace ( wxFindReplaceData &  aSearchData,
wxString &  aText 
)
staticinherited

Helper function used in search and replace dialog Function Replace performs a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search and replace criteria.
aTextA reference to a wxString object containing the text to be replaced.
Returns
True if aText was modified, otherwise false.

Definition at line 170 of file base_struct.cpp.

171 {
172  wxString searchString = (aSearchData.GetFlags() & wxFR_MATCHCASE) ? aText : aText.Upper();
173 
174  int result = searchString.Find( (aSearchData.GetFlags() & wxFR_MATCHCASE) ?
175  aSearchData.GetFindString() :
176  aSearchData.GetFindString().Upper() );
177 
178  if( result == wxNOT_FOUND )
179  return false;
180 
181  wxString prefix = aText.Left( result );
182  wxString suffix;
183 
184  if( aSearchData.GetFindString().length() + result < aText.length() )
185  suffix = aText.Right( aText.length() - ( aSearchData.GetFindString().length() + result ) );
186 
187  wxLogTrace( traceFindReplace, wxT( "Replacing '%s', prefix '%s', replace '%s', suffix '%s'." ),
188  GetChars( aText ), GetChars( prefix ), GetChars( aSearchData.GetReplaceString() ),
189  GetChars( suffix ) );
190 
191  aText = prefix + aSearchData.GetReplaceString() + suffix;
192 
193  return true;
194 }
const wxChar *const traceFindReplace
Flag to enable find and replace debug tracing.
static const wxChar * GetChars(const wxString &s)
Function GetChars returns a wxChar* to the actual wxChar* data within a wxString, and is helpful for ...
Definition: macros.h:153

References GetChars(), and traceFindReplace.

Referenced by SCH_FIELD::Replace(), EDA_TEXT::Replace(), and SCH_EDITOR_CONTROL::ReplaceAndFindNext().

◆ Replace() [2/2]

virtual bool EDA_ITEM::Replace ( wxFindReplaceData &  aSearchData,
void *  aAuxData = NULL 
)
inlinevirtualinherited

Function Replace performs a text replace using the find and replace criteria in aSearchData on items that support text find and replace.

This function must be overridden for items that support text replace.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search and replace criteria.
aAuxDataA pointer to optional data required for the search or NULL if not used.
Returns
True if the item text was modified, otherwise false.

Reimplemented in SCH_TEXT, SCH_SHEET_PIN, and SCH_FIELD.

Definition at line 489 of file base_struct.h.

489 { return false; }

◆ Rotate() [1/2]

virtual void BOARD_ITEM::Rotate ( const wxPoint aRotCentre,
double  aAngle 
)
inlinevirtual

Function Rotate Rotate this object.

Parameters
aRotCentre- the rotation point.
aAngle- the rotation angle in 0.1 degree.

Reimplemented in D_PAD, ZONE_CONTAINER, ARC, MODULE, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, TRACK, EDGE_MODULE, TEXTE_PCB, PCB_TARGET, and MARKER_PCB.

Definition at line 265 of file class_board_item.h.

266  {
267  wxMessageBox( wxT( "virtual BOARD_ITEM::Rotate used, should not occur" ), GetClass() );
268  }
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References EDA_ITEM::GetClass().

Referenced by EDIT_TOOL::MoveExact(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), Rotate(), and TransformItem().

◆ Rotate() [2/2]

void BOARD_ITEM::Rotate ( const VECTOR2I aRotCentre,
double  aAngle 
)
inline

Definition at line 270 of file class_board_item.h.

271  {
272  Rotate( wxPoint( aRotCentre.x, aRotCentre.y ), aAngle );
273  }
virtual void Rotate(const wxPoint &aRotCentre, double aAngle)
Function Rotate Rotate this object.

References Rotate(), VECTOR2< T >::x, and VECTOR2< T >::y.

◆ SetBrightened()

void EDA_ITEM::SetBrightened ( )
inlineinherited

◆ SetFlags()

void EDA_ITEM::SetFlags ( STATUS_FLAGS  aMask)
inlineinherited

Definition at line 232 of file base_struct.h.

232 { m_Flags |= aMask; }
STATUS_FLAGS m_Flags
Definition: base_struct.h:176

References EDA_ITEM::m_Flags.

Referenced by SCH_EAGLE_PLUGIN::addBusEntries(), PCB_BASE_FRAME::AddModuleToBoard(), PCBNEW_CONTROL::AppendBoard(), SCH_EDIT_TOOL::ChangeTextType(), GRAPHICS_CLEANER::cleanupSegments(), TRACKS_CLEANER::cleanupSegments(), SCH_EDIT_FRAME::ConvertPart(), SCH_DRAWING_TOOLS::createNewText(), LIB_PIN_TOOL::CreatePin(), SCH_EDIT_FRAME::CreateSheetPin(), SCH_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), KIGFX::SCH_PAINTER::draw(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), DRAWING_TOOL::DrawRectangle(), LIB_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_EDIT_TOOL::Duplicate(), LIB_EDIT_FRAME::GetComponentFromRedoList(), LIB_EDIT_FRAME::GetComponentFromUndoList(), SCH_MOVE_TOOL::getConnectedDragItems(), EDIT_POINTS_FACTORY::Make(), TRACKS_CLEANER::mergeCollinearSegments(), LIB_MOVE_TOOL::moveItem(), SCH_MOVE_TOOL::moveItem(), KIGFX::ORIGIN_VIEWITEM::ORIGIN_VIEWITEM(), LIB_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), SCH_DRAWING_TOOLS::PlaceComponent(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), PCB_EDITOR_CONTROL::PlaceModule(), DRAWING_TOOL::PlaceText(), SCH_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_PIN_TOOL::RepeatPin(), LIB_EDIT_FRAME::SaveCopyInUndoList(), SELECTION_TOOL::selectConnectedTracks(), EE_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectPoint(), SCH_EDIT_FRAME::SelectUnit(), EDA_ITEM::SetBrightened(), LIB_PIN::SetConversion(), EDA_ITEM::SetModified(), EDA_ITEM::SetSelected(), EDA_ITEM::SetWireImage(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_LINE_WIRE_BUS_TOOL::startSegments(), WS_DATA_ITEM::SyncDrawItems(), WS_DATA_ITEM_TEXT::SyncDrawItems(), DIALOG_TARGET_PROPERTIES::TransferDataFromWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), LIB_DRAWING_TOOLS::TwoClickPlace(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ SetForceVisible()

void EDA_ITEM::SetForceVisible ( bool  aEnable)
inlineinherited

Function SetForceVisible is used to set and cleag force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible.

Parameters
aEnableTrue forces the item to be drawn. False uses the item's visibility setting to determine if the item is to be drawn.

Definition at line 284 of file base_struct.h.

284 { m_forceVisible = aEnable; }
bool m_forceVisible
Definition: base_struct.h:175

References EDA_ITEM::m_forceVisible.

◆ SetLayer()

virtual void BOARD_ITEM::SetLayer ( PCB_LAYER_ID  aLayer)
inlinevirtual

Function SetLayer sets the layer this item is on.

Parameters
aLayerThe layer number. is virtual because some items (in fact: class DIMENSION) have a slightly different initialization

Reimplemented in ZONE_CONTAINER, and DIMENSION.

Definition at line 159 of file class_board_item.h.

160  {
161  // trap any invalid layers, then go find the caller and fix it.
162  // wxASSERT( unsigned( aLayer ) < unsigned( NB_PCB_LAYERS ) );
163  m_Layer = aLayer;
164  }
PCB_LAYER_ID m_Layer

References m_Layer.

Referenced by PNS_KICAD_IFACE::AddItem(), PCAD2KICAD::PCB_TEXT::AddToBoard(), PCAD2KICAD::PCB_LINE::AddToBoard(), PCAD2KICAD::PCB_ARC::AddToBoard(), PCAD2KICAD::PCB_PAD::AddToBoard(), PCAD2KICAD::PCB_MODULE::AddToBoard(), PCAD2KICAD::PCB_LINE::AddToModule(), PCAD2KICAD::PCB_ARC::AddToModule(), PCAD2KICAD::PCB_POLYGON::AddToModule(), DIMENSION::AdjustDimensionDetails(), ZONE_FILLER::buildCopperItemClearances(), MICROWAVE_TOOL::createMicrowaveInductor(), PCB_BASE_FRAME::CreateNewModule(), MICROWAVE_TOOL::createPolygonShape(), DRC::doTrackDrc(), DRAWING_TOOL::drawArc(), PAD_TOOL::explodePad(), PCB_TARGET::Flip(), TEXTE_PCB::Flip(), EDGE_MODULE::Flip(), TRACK::Flip(), TEXTE_MODULE::Flip(), DRAWSEGMENT::Flip(), MODULE::Flip(), ARC::Flip(), ALTIUM_PCB::HelperCreateBoardOutline(), ALTIUM_PCB::HelperParseDimensions6Center(), ALTIUM_PCB::HelperParseDimensions6Datum(), ALTIUM_PCB::HelperParseDimensions6Leader(), ALTIUM_PCB::HelperParsePad6NonCopper(), LEGACY_PLUGIN::loadMODULE(), LEGACY_PLUGIN::loadMODULE_TEXT(), LEGACY_PLUGIN::loadPCB_TEXT(), EAGLE_PLUGIN::loadPlain(), EAGLE_PLUGIN::loadSignals(), LEGACY_PLUGIN::loadTrackList(), DSN::SPECCTRA_DB::makeTRACK(), GRAPHICS_CLEANER::mergeRects(), DIALOG_FOOTPRINT_FP_EDITOR::OnAddField(), DIALOG_FOOTPRINT_BOARD_EDITOR::OnAddField(), EAGLE_PLUGIN::packageCircle(), EAGLE_PLUGIN::packagePolygon(), EAGLE_PLUGIN::packageRectangle(), EAGLE_PLUGIN::packageSMD(), EAGLE_PLUGIN::packageText(), EAGLE_PLUGIN::packageWire(), ALTIUM_PCB::ParseArcs6Data(), ALTIUM_PCB::ParseComponents6Data(), ALTIUM_PCB::ParseFills6Data(), GPCB_FPL_CACHE::parseMODULE(), ALTIUM_PCB::ParsePads6Data(), ALTIUM_PCB::ParseShapeBasedRegions6Data(), ALTIUM_PCB::ParseTexts6Data(), ALTIUM_PCB::ParseTracks6Data(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotPcbTarget(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::processItem(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), processTextItem(), DIALOG_PAD_PROPERTIES::redraw(), DIMENSION::SetLayer(), TEXT_MOD_GRID_TABLE::SetValueAsLong(), GLOBAL_EDIT_TOOL::swapBoardItem(), DRC::testPadClearances(), TEXTE_MODULE::TEXTE_MODULE(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), and DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow().

◆ SetLocked()

virtual void BOARD_ITEM::SetLocked ( bool  aLocked)
inlinevirtual

Function SetLocked modifies 'lock' status for of the item.

Reimplemented in MODULE, and TRACK.

Definition at line 225 of file class_board_item.h.

226  {
227  // only MODULEs & TRACKs can be locked at this time.
228  }

Referenced by PCB_EDITOR_CONTROL::modifyLockSelected(), ALTIUM_PCB::ParsePads6Data(), and ALTIUM_PCB::ParsePolygons6Data().

◆ SetModified()

◆ SetParent()

virtual void EDA_ITEM::SetParent ( EDA_ITEM aParent)
inlinevirtualinherited

Definition at line 196 of file base_struct.h.

196 { m_Parent = aParent; }
EDA_ITEM * m_Parent
Linked list: Link (parent struct)
Definition: base_struct.h:174

References EDA_ITEM::m_Parent.

Referenced by MODULE::Add(), BOARD::Add(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), BOARD_NETLIST_UPDATER::addNewComponent(), SCH_SHEET::AddPin(), LIB_CONTROL::AddSymbolToSchematic(), SCH_SCREEN::Append(), LIB_FIELD::Copy(), LIB_EDIT_FRAME::CreateNewPart(), SCH_DRAWING_TOOLS::createNewText(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), SCH_EDIT_TOOL::Duplicate(), PCB_EDIT_FRAME::Exchange_Module(), LIB_PART::Flatten(), PCB_IO::FootprintSave(), DISPLAY_FOOTPRINTS_FRAME::GetModule(), LIB_PART::LIB_PART(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), SCH_LEGACY_PLUGIN_CACHE::loadAliases(), SCH_SEXPR_PLUGIN::loadHierarchy(), SCH_LEGACY_PLUGIN::loadHierarchy(), LIB_EDIT_FRAME::LoadOneSymbol(), MODULE::MODULE(), DIALOG_LIB_EDIT_PIN::OnPaintShowPanel(), MODULE::operator=(), LIB_PART::operator=(), PCB_PARSER::parseMODULE_unchecked(), SCH_SEXPR_PARSER::ParseSchematic(), SCH_SEXPR_PARSER::ParseSymbol(), LIB_EDIT_TOOL::Paste(), PCBNEW_CONTROL::Paste(), SCH_EDITOR_CONTROL::Paste(), pasteModuleItemsToModEdit(), SCH_DRAWING_TOOLS::PlaceComponent(), PCB_EDITOR_CONTROL::PlaceModule(), BOARD_COMMIT::Push(), SCH_SEXPR_PLUGIN_CACHE::removeSymbol(), SCH_LEGACY_PLUGIN_CACHE::removeSymbol(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SaveCopyOfZones(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_SHEET_PIN::SCH_SHEET_PIN(), LIB_PART::SetFields(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_SHEET::SwapData(), SCH_COMPONENT::SwapData(), SwapItemData(), and DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::UpdateFieldsFromLibrary().

◆ SetPosition()

◆ SetSelected()

◆ SetState()

void EDA_ITEM::SetState ( int  type,
int  state 
)
inlineinherited

Definition at line 221 of file base_struct.h.

222  {
223  if( state )
224  m_Status |= type; // state = ON or OFF
225  else
226  m_Status &= ~type;
227  }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by LEGACY_PLUGIN::loadTrackList(), TRACKS_CLEANER::mergeCollinearSegments(), and TRACK::SetLocked().

◆ SetStatus()

void EDA_ITEM::SetStatus ( STATUS_FLAGS  aStatus)
inlineinherited

Definition at line 230 of file base_struct.h.

230 { m_Status = aStatus; }
STATUS_FLAGS m_Status
Definition: base_struct.h:173

References EDA_ITEM::m_Status.

Referenced by BOARD_NETLIST_UPDATER::UpdateNetlist().

◆ SetWireImage()

void EDA_ITEM::SetWireImage ( )
inlineinherited

Definition at line 207 of file base_struct.h.

207 { SetFlags( IS_WIRE_IMAGE ); }
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:232
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:121

References IS_WIRE_IMAGE, and EDA_ITEM::SetFlags().

◆ ShowShape()

wxString BOARD_ITEM::ShowShape ( STROKE_T  aShape)
static

Function ShowShape converts the enum STROKE_T integer value to a wxString.

Definition at line 39 of file class_board_item.cpp.

40 {
41  switch( aShape )
42  {
43  case S_SEGMENT: return _( "Line" );
44  case S_RECT: return _( "Rect" );
45  case S_ARC: return _( "Arc" );
46  case S_CIRCLE: return _( "Circle" );
47  case S_CURVE: return _( "Bezier Curve" );
48  case S_POLYGON: return _( "Polygon" );
49  default: return wxT( "??" );
50  }
51 }
polygon (not yet used for tracks, but could be in microwave apps)
usual segment : line with rounded ends
segment with non rounded ends
Arcs (with rounded ends)
Bezier Curve.
#define _(s)
Definition: 3d_actions.cpp:33

References _, S_ARC, S_CIRCLE, S_CURVE, S_POLYGON, S_RECT, and S_SEGMENT.

Referenced by ConvertOutlineToPolygon(), DRAWSEGMENT::GetLength(), EDGE_MODULE::GetSelectMenuText(), DRAWSEGMENT::GetSelectMenuText(), DSN::SPECCTRA_DB::makeIMAGE(), and DIALOG_GRAPHIC_ITEM_PROPERTIES::Validate().

◆ Sort()

static bool EDA_ITEM::Sort ( const EDA_ITEM aLeft,
const EDA_ITEM aRight 
)
inlinestaticinherited

Function Sort is a helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers.

Parameters
aLeftThe left hand item to compare.
aRightThe right hand item to compare.
Returns
True if aLeft is less than aRight.

Definition at line 520 of file base_struct.h.

520 { return *aLeft < *aRight; }

◆ SwapData()

void BOARD_ITEM::SwapData ( BOARD_ITEM aImage)
virtual

Swap data between aItem and aImage.

aItem and aImage should have the same type Used in undo redo command to swap values between an item and its copy Only values like layer, size .. which are modified by editing are swapped

Parameters
aImage= the item image which contains data to swap

Reimplemented in ZONE_CONTAINER, MODULE, D_PAD, VIA, ARC, DRAWSEGMENT, DIMENSION, TRACK, TEXTE_PCB, and PCB_TARGET.

Definition at line 135 of file class_board_item.cpp.

136 {
137 
138 }

Referenced by BOARD_COMMIT::Revert(), and SwapItemData().

◆ TransformShapeWithClearanceToPolygon()

void BOARD_ITEM::TransformShapeWithClearanceToPolygon ( SHAPE_POLY_SET aCornerBuffer,
int  aClearanceValue,
int  aError = ARC_LOW_DEF,
bool  ignoreLineWidth = false 
) const
virtual

Function TransformShapeWithClearanceToPolygon Convert the item shape to a closed polygon Used in filling zones calculations Circles and arcs are approximated by segments.

Parameters
aCornerBuffer= a buffer to store the polygon
aClearanceValue= the clearance around the pad
aError= the maximum deviation from true circle
ignoreLineWidth= used for edge cut items where the line width is only for visualization

Reimplemented in D_PAD, ZONE_CONTAINER, DRAWSEGMENT, and TRACK.

Definition at line 140 of file class_board_item.cpp.

142 {
143  wxASSERT_MSG( false, "Called TransformShapeWithClearanceToPolygon() on unsupported BOARD_ITEM." );
144 };

Referenced by process().

◆ Type()

KICAD_T EDA_ITEM::Type ( ) const
inlineinherited

Function Type()

returns the type of object. This attribute should never be changed after a constructor sets it, so there is no public "setter" method.

Returns
KICAD_T - the type of object.

Definition at line 193 of file base_struct.h.

193 { return m_StructType; }
KICAD_T m_StructType
Run time identification, keep private so it can never be changed after a constructor sets it.
Definition: base_struct.h:170

References EDA_ITEM::m_StructType.

Referenced by MODULE::Add(), CN_CONNECTIVITY_ALGO::Add(), BOARD::Add(), CN_CLUSTER::Add(), POINT_EDITOR::addCorner(), CONNECTION_SUBGRAPH::AddItem(), SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_LINE_WIRE_BUS_TOOL::AddJunctionsIfNeeded(), ZONE_FILLER::addKnockout(), SCH_SHEET::AddPin(), ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), CN_ITEM::AnchorCount(), SCH_SCREEN::Append(), CONNECTION_GRAPH::buildConnectionGraph(), SCH_SCREENS::buildScreenList(), calcArea(), calcMaxArea(), PCB_INSPECTION_TOOL::calculateSelectionRatsnest(), POINT_EDITOR::canAddCorner(), SCH_JUNCTION::CanConnect(), SCH_NO_CONNECT::CanConnect(), SCH_BUS_WIRE_ENTRY::CanConnect(), SCH_LINE::CanConnect(), SCH_BUS_BUS_ENTRY::CanConnect(), SCH_LABEL::CanConnect(), SCH_GLOBALLABEL::CanConnect(), SCH_HIERLABEL::CanConnect(), SCH_SHEET::CanConnect(), SCH_COMPONENT::CanConnect(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeTextType(), SCH_MARKER::ClassOf(), SCH_JUNCTION::ClassOf(), TEXTE_PCB::ClassOf(), MARKER_PCB::ClassOf(), SCH_NO_CONNECT::ClassOf(), BOARD_CONNECTED_ITEM::ClassOf(), SCH_PIN::ClassOf(), EDGE_MODULE::ClassOf(), SCH_LINE::ClassOf(), PCB_TARGET::ClassOf(), SCH_FIELD::ClassOf(), TEXTE_MODULE::ClassOf(), DRAWSEGMENT::ClassOf(), ZONE_CONTAINER::ClassOf(), SCH_BITMAP::ClassOf(), D_PAD::ClassOf(), DIMENSION::ClassOf(), TRACK::ClassOf(), NETINFO_ITEM::ClassOf(), SCH_SHEET_PIN::ClassOf(), MODULE::ClassOf(), SCH_BUS_WIRE_ENTRY::ClassOf(), SCH_COMPONENT::ClassOf(), SCH_SCREEN::ClassOf(), SCH_BUS_BUS_ENTRY::ClassOf(), SCH_TEXT::ClassOf(), SCH_SHEET::ClassOf(), BOARD::ClassOf(), ARC::ClassOf(), SCH_LABEL::ClassOf(), VIA::ClassOf(), SCH_GLOBALLABEL::ClassOf(), SCH_HIERLABEL::ClassOf(), TRACKS_CLEANER::cleanupSegments(), LIB_BEZIER::compare(), LIB_CIRCLE::compare(), LIB_RECTANGLE::compare(), LIB_TEXT::compare(), LIB_POLYLINE::compare(), LIB_ARC::compare(), LIB_FIELD::compare(), LIB_ITEM::compare(), LIB_PIN::compare(), GRID_HELPER::computeAnchors(), SCH_BUS_WIRE_ENTRY::ConnectionPropagatesTo(), EE_RTREE::contains(), DIALOG_TEXT_PROPERTIES::convertKIIDsToReferences(), DIALOG_LABEL_EDITOR::convertKIIDsToReferences(), MODULE::CoverageRatio(), BOARD_ADAPTER::createLayers(), PCB_BASE_FRAME::CreateNewModule(), SCH_DRAWING_TOOLS::createNewText(), BOARD_ADAPTER::createNewTrack(), D_PAD::D_PAD(), SCH_SCREEN::DeleteItem(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_SCH_EDIT_ONE_FIELD::DIALOG_SCH_EDIT_ONE_FIELD(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDIT_TOOL::DoDelete(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsVertically(), DRC::doTrackDrc(), KIGFX::SCH_PAINTER::draw(), KIGFX::GERBVIEW_PAINTER::Draw(), KIGFX::PCB_PAINTER::Draw(), CN_ITEM::Dump(), EDIT_TOOL::Duplicate(), SCH_ITEM::Duplicate(), MODULE::DuplicateItem(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), LIB_EDIT_TOOL::editTextProperties(), EditToolSelectionFilter(), CONNECTION_GRAPH::ercCheckBusToBusEntryConflicts(), CONNECTION_GRAPH::ercCheckLabels(), NETLIST_EXPORTER::findNextComponent(), PCB_BASE_FRAME::FocusOnItem(), EDIT_TOOL::FootprintFilter(), SCH_SEXPR_PLUGIN::Format(), SCH_LEGACY_PLUGIN::Format(), PCB_IO::Format(), PCB_IO::format(), FormatProbeItem(), POINT_EDITOR::get45DegConstrainer(), CN_ITEM::GetAnchor(), GetBoard(), SCH_FIELD::GetBoundingBox(), TRACK::GetBoundingBox(), SCH_FIELD::GetCanonicalName(), KIGFX::GERBVIEW_RENDER_SETTINGS::GetColor(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), NETLIST_OBJECT::GetComponentParent(), SCH_MOVE_TOOL::getConnectedDragItems(), SCH_TEXT::GetConnectionPoints(), SCH_TEXT::GetContextualTextVars(), CONNECTION_GRAPH::getDefaultConnection(), CONNECTION_SUBGRAPH::GetDriverPriority(), SCH_TEXT::GetEndPoints(), PL_EDITOR_FRAME::GetLayoutFromRedoList(), PL_EDITOR_FRAME::GetLayoutFromUndoList(), SCH_FIELD::GetMenuImage(), TEXTE_PCB::GetMsgPanelInfo(), SCH_TEXT::GetMsgPanelInfo(), SCH_FIELD::GetName(), CONNECTION_SUBGRAPH::GetNameForDriver(), CONNECTIVITY_DATA::GetNetItems(), LIB_PART::GetNextDrawItem(), DRAWSEGMENT::GetParentModule(), LIB_PART::GetPin(), SCH_COMPONENT::GetPinPhysicalPosition(), SCH_FIELD::GetPosition(), getRect(), KIGFX::SCH_PAINTER::getRenderColor(), TEXTE_PCB::GetShownText(), SCH_FIELD::GetShownText(), SCH_TEXT::GetShownText(), EE_SELECTION_TOOL::GuessSelectionCandidates(), SELECTION_TOOL::GuessSelectionCandidates(), hash_eda(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), highlightNet(), SCH_EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), EE_RTREE::insert(), EE_COLLECTOR::Inspect(), GENERAL_COLLECTOR::Inspect(), PCB_LAYER_COLLECTOR::Inspect(), ARRAY_CREATOR::Invoke(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLineWireOrBus(), TRACK::IsNull(), SCH_LINE::IsParallel(), SCH_FIELD::IsReplaceable(), SCH_SCREEN::IsTerminalPoint(), IsTrack(), itemIsIncludedByFilter(), SELECTION_TOOL::itemPassesFilter(), CLIPBOARD_IO::Load(), PNS_PCBNEW_RULE_RESOLVER::localPadClearance(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), SCH_MOVE_TOOL::Main(), EE_SELECTION_TOOL::Main(), EDIT_POINTS_FACTORY::Make(), SCH_SCREEN::MarkConnections(), CN_CONNECTIVITY_ALGO::markItemNetAsDirty(), CONNECTIVITY_DATA::MarkItemNetAsDirty(), SCH_FIELD::Matches(), SCH_LINE::MergeOverlap(), SCH_EDIT_TOOL::Mirror(), SCH_MOVE_TOOL::moveItem(), SCH_EDITOR_CONTROL::nextMatch(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), PCB_EDIT_FRAME::OnEditItemRequest(), SCH_JUNCTION::operator<(), SCH_BUS_ENTRY_BASE::operator<(), SCH_FIELD::operator<(), SCH_LINE::operator<(), LIB_ITEM::operator<(), SCH_TEXT::operator<(), SCH_ITEM::operator<(), SCH_SHEET::operator<(), SCH_COMPONENT::operator<(), SCH_BITMAP::operator=(), SCH_SHEET::operator=(), SCH_COMPONENT::operator=(), EDIT_TOOL::PadFilter(), BOARD_COMMIT::parentObject(), PCBNEW_CONTROL::Paste(), SCH_EDITOR_CONTROL::Paste(), DRAWING_TOOL::PlaceImportedGraphics(), SCH_FIELD::Plot(), SCH_SCREEN::Plot(), BRDITEMS_PLOTTER::PlotFootprintGraphicItem(), SCH_FIELD::Print(), SCH_SCREEN::Print(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::processItem(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), SELECTION_TOOL::RebuildSelection(), SCH_CONNECTION::recacheName(), SCH_BASE_FRAME::RefreshItem(), SCH_BASE_FRAME::RefreshSelection(), EE_RTREE::remove(), MODULE::Remove(), CN_CONNECTIVITY_ALGO::Remove(), SCH_SCREEN::Remove(), BOARD::Remove(), POINT_EDITOR::removeCorner(), POINT_EDITOR::removeCornerCondition(), LIB_PART::RemoveDrawItem(), SCH_SHEET::RemovePin(), SCH_EDIT_TOOL::RepeatDrawItem(), SCH_FIELD::Replace(), WS_PROXY_UNDO_ITEM::Restore(), PL_EDITOR_FRAME::RollbackFromUndo(), SCH_EDIT_TOOL::Rotate(), SCH_TEXT::Rotate(), DRC_TEXTVAR_TESTER::RunDRC(), SCH_SEXPR_PLUGIN_CACHE::saveArc(), SCH_LEGACY_PLUGIN_CACHE::saveArc(), SCH_SEXPR_PLUGIN_CACHE::saveBezier(), SCH_LEGACY_PLUGIN_CACHE::saveBezier(), SCH_SEXPR_PLUGIN_CACHE::saveCircle(), SCH_LEGACY_PLUGIN_CACHE::saveCircle(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), EE_TOOL_BASE< SCH_BASE_FRAME >::saveCopyInUndoList(), SCH_SEXPR_PLUGIN::saveField(), SCH_SEXPR_PLUGIN_CACHE::saveField(), SCH_LEGACY_PLUGIN_CACHE::saveField(), SCH_SEXPR_PLUGIN_CACHE::savePin(), SCH_LEGACY_PLUGIN_CACHE::savePin(), SCH_SEXPR_PLUGIN_CACHE::savePolyLine(), SCH_LEGACY_PLUGIN_CACHE::savePolyLine(), SCH_SEXPR_PLUGIN_CACHE::saveRectangle(), SCH_LEGACY_PLUGIN_CACHE::saveRectangle(), SCH_SEXPR_PLUGIN_CACHE::saveSymbolDrawItem(), SCH_SEXPR_PLUGIN::saveText(), SCH_SEXPR_PLUGIN_CACHE::saveText(), SCH_LEGACY_PLUGIN_CACHE::saveText(), SCH_SCREEN::Schematic(), SCH_ITEM::Schematic(), SELECTION_TOOL::select(), EE_SELECTION_TOOL::Selectable(), SELECTION_TOOL::Selectable(), SELECTION_TOOL::selectConnectedTracks(), SCH_FIELD::SetId(), ITEM_PICKER::SetItem(), SCH_FIELD::SetPosition(), DIALOG_LABEL_EDITOR::SetTitle(), PCB_EDIT_FRAME::SetTrackSegmentWidth(), BOARD_COMMIT::Stage(), SCH_JUNCTION::SwapData(), SCH_NO_CONNECT::SwapData(), SCH_BITMAP::SwapData(), PCB_TARGET::SwapData(), SCH_SHEET_PIN::SwapData(), SCH_FIELD::SwapData(), TEXTE_PCB::SwapData(), TRACK::SwapData(), DIMENSION::SwapData(), ARC::SwapData(), SCH_SHEET::SwapData(), VIA::SwapData(), SCH_COMPONENT::SwapData(), D_PAD::SwapData(), MODULE::SwapData(), ZONE_CONTAINER::SwapData(), SwapItemData(), TEXTE_MODULE::TEXTE_MODULE(), DIALOG_LABEL_EDITOR::TransferDataFromWindow(), DIALOG_FIELDS_EDITOR_GLOBAL::TransferDataToWindow(), DIALOG_TEXT_PROPERTIES::TransferDataToWindow(), DIALOG_LABEL_EDITOR::TransferDataToWindow(), TRACK::TransformShapeWithClearanceToPolygon(), LIB_DRAWING_TOOLS::TwoClickPlace(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), SCH_TEXT::UpdateDanglingState(), DIALOG_SCH_EDIT_ONE_FIELD::UpdateField(), EE_POINT_EDITOR::updateItem(), PL_POINT_EDITOR::updateItem(), POINT_EDITOR::updateItem(), CONNECTION_GRAPH::updateItemConnectivity(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_BRIGHT_BOX::ViewDraw(), SCH_BUS_ENTRY_BASE::ViewGetLayers(), TRACK::Visit(), GERBER_DRAW_ITEM::Visit(), SCH_SHEET::Visit(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ ViewBBox()

const BOX2I EDA_ITEM::ViewBBox ( ) const
overridevirtualinherited

Function ViewBBox() returns the bounding box of the item covering all its layers.

Returns
BOX2I - the current bounding box

Implements KIGFX::VIEW_ITEM.

Reimplemented in MODULE, D_PAD, EDIT_POINTS, GERBER_DRAW_ITEM, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, TRACK, ROUTER_PREVIEW_ITEM, MARKER_PCB, KIGFX::WS_PROXY_VIEW_ITEM, MY_DRAWING, KIGFX::ORIGIN_VIEWITEM, KIGFX::PREVIEW::CENTRELINE_RECT_ITEM, KIGFX::PREVIEW::POLYGON_ITEM, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::PREVIEW::RULER_ITEM, KIGFX::RATSNEST_VIEWITEM, KIGFX::PREVIEW::ARC_ASSISTANT, and BRIGHT_BOX.

Definition at line 218 of file base_struct.cpp.

219 {
220  // Basic fallback
221  return BOX2I( VECTOR2I( GetBoundingBox().GetOrigin() ),
222  VECTOR2I( GetBoundingBox().GetSize() ) );
223 }
BOX2< VECTOR2I > BOX2I
Definition: box2.h:521
VECTOR2< int > VECTOR2I
Definition: vector2d.h:594
virtual const EDA_RECT GetBoundingBox() const
Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes.
Definition: base_struct.cpp:95

References EDA_ITEM::GetBoundingBox().

Referenced by GERBVIEW_FRAME::GetDocumentExtents(), BRIGHT_BOX::ViewBBox(), DIMENSION::ViewBBox(), DRAWSEGMENT::ViewBBox(), and BRIGHT_BOX::ViewDraw().

◆ ViewDraw()

virtual void KIGFX::VIEW_ITEM::ViewDraw ( int  aLayer,
VIEW aView 
) const
inlinevirtualinherited

Function ViewDraw() Draws the parts of the object belonging to layer aLayer.

viewDraw() is an alternative way for drawing objects if if there is no PAINTER assigned for the view or if the PAINTER doesn't know how to paint this particular implementation of VIEW_ITEM. The preferred way of drawing is to design an appropriate PAINTER object, the method below is intended only for quick hacks and debugging purposes.

Parameters
aLayercurrent drawing layer
aViewpointer to the VIEW device we are drawing on

Reimplemented in EDIT_POINTS, ROUTER_PREVIEW_ITEM, KIGFX::VIEW_GROUP, KIGFX::WS_PROXY_VIEW_ITEM, KIGFX::PREVIEW::SELECTION_AREA, MY_DRAWING, KIGFX::PREVIEW::SIMPLE_OVERLAY_ITEM, KIGFX::VIEW_OVERLAY, KIGFX::ORIGIN_VIEWITEM, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, BRIGHT_BOX, KIGFX::PREVIEW::RULER_ITEM, KIGFX::RATSNEST_VIEWITEM, KIGFX::PREVIEW::ARC_ASSISTANT, and PCB_BRIGHT_BOX.

Definition at line 116 of file view_item.h.

117  {}

Referenced by KIGFX::VIEW::draw(), and KIGFX::VIEW::updateItemGeometry().

◆ ViewGetLayers()

void BOARD_ITEM::ViewGetLayers ( int  aLayers[],
int &  aCount 
) const
overridevirtual

Function ViewGetLayers() Returns the all the layers within the VIEW the object is painted on.

For instance, a D_PAD spans zero or more copper layers and a few technical layers. ViewDraw() or PAINTER::Draw() is repeatedly called for each of the layers returned by ViewGetLayers(), depending on the rendering order.

Parameters
aLayers[]output layer index array
aCountnumber of layer indices in aLayers[]

Reimplemented from EDA_ITEM.

Reimplemented in MODULE, D_PAD, VIA, TEXTE_MODULE, TRACK, ZONE_CONTAINER, MARKER_PCB, and KIGFX::ORIGIN_VIEWITEM.

Definition at line 116 of file class_board_item.cpp.

117 {
118  // Basic fallback
119  aCount = 1;
120  aLayers[0] = m_Layer;
121 }
PCB_LAYER_ID m_Layer

References m_Layer.

Referenced by SELECTION_TOOL::Selectable().

◆ ViewGetLOD()

virtual unsigned int KIGFX::VIEW_ITEM::ViewGetLOD ( int  aLayer,
VIEW aView 
) const
inlinevirtualinherited

Function ViewGetLOD() Returns the level of detail (LOD) of the item.

A level of detail is the minimal VIEW scale that is sufficient for an item to be shown on a given layer.

Parameters
aLayercurrent drawing layer
aViewpointer to the VIEW device we are drawing on
Returns
the level of detail. 0 always show the item, because the actual zoom level (or VIEW scale) is always > 0

Reimplemented in MODULE_ZONE_CONTAINER, MODULE, D_PAD, VIA, GERBER_DRAW_ITEM, TEXTE_MODULE, TRACK, and EDGE_MODULE.

Definition at line 140 of file view_item.h.

141  {
142  // By default always show the item
143  return 0;
144  }

Referenced by KIGFX::VIEW::drawItem::operator()(), GRID_HELPER::queryVisible(), and SELECTION_TOOL::Selectable().

◆ viewPrivData()

◆ Visit()

SEARCH_RESULT EDA_ITEM::Visit ( INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
virtualinherited

Function Visit may be re-implemented for each derived class in order to handle all the types given by its member data.

Implementations should call inspector->Inspect() on types in scanTypes[], and may use IterateForward() to do so on lists of such data.

Parameters
inspectorAn INSPECTOR instance to use in the inspection.
testDataArbitrary data used by the inspector.
scanTypesWhich KICAD_T types are of interest and the order is significant too, terminated by EOT.
Returns
SEARCH_RESULT SEARCH_QUIT if the Iterator is to stop the scan, else SCAN_CONTINUE, and determined by the inspector.

Reimplemented in BOARD, SCH_COMPONENT, MODULE, SCH_SHEET, LIB_PART, GERBER_FILE_IMAGE, GERBER_DRAW_ITEM, TRACK, and GBR_LAYOUT.

Definition at line 118 of file base_struct.cpp.

119 {
120 #if 0 && defined(DEBUG)
121  std::cout << GetClass().mb_str() << ' ';
122 #endif
123 
124  if( IsType( scanTypes ) )
125  {
126  if( SEARCH_RESULT::QUIT == inspector( this, testData ) )
127  return SEARCH_RESULT::QUIT;
128  }
129 
131 }
virtual bool IsType(const KICAD_T aScanTypes[]) const
Function IsType Checks whether the item is one of the listed types.
Definition: base_struct.h:262
virtual wxString GetClass() const =0
Function GetClass returns the class name.

References CONTINUE, EDA_ITEM::GetClass(), EDA_ITEM::IsType(), and QUIT.

Referenced by GERBER_COLLECTOR::Collect(), GENERAL_COLLECTOR::Collect(), PCB_TYPE_COLLECTOR::Collect(), PCB_LAYER_COLLECTOR::Collect(), and EDA_ITEM::IterateForward().

Member Data Documentation

◆ m_Flags

◆ m_forceVisible

bool EDA_ITEM::m_forceVisible
protectedinherited

◆ m_Layer

◆ m_Parent

◆ m_Status

STATUS_FLAGS EDA_ITEM::m_Status
protectedinherited

◆ m_Uuid

const KIID EDA_ITEM::m_Uuid
inherited

Definition at line 162 of file base_struct.h.

Referenced by FIELDS_EDITOR_GRID_DATA_MODEL::AddColumn(), SCH_COMPONENT::AddHierarchicalReference(), SCH_EDIT_FRAME::AnnotateComponents(), FIELDS_EDITOR_GRID_DATA_MODEL::ApplyData(), SCH_SHEET_PATH::Cmp(), DIALOG_LABEL_EDITOR::convertReferencesToKIIDs(), Duplicate(), SCH_ITEM::Duplicate(), PAD_TOOL::EditPad(), PCB_EDIT_FRAME::Exchange_Module(), PAD_TOOL::explodePad(), PCB_BASE_FRAME::FocusOnItem(), SCH_EDIT_FRAME::FocusOnItem(), PCB_IO::format(), FormatProbeItem(), SCH_PIN::GetDefaultNetName(), BOARD::GetItem(), SCH_SHEET::GetMsgPanelInfo(), SCH_REFERENCE::GetPath(), SCH_COMPONENT::GetRef(), SCH_MARKER::GetUUID(), MARKER_PCB::GetUUID(), FIELDS_EDITOR_GRID_DATA_MODEL::groupMatch(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), SCH_LEGACY_PLUGIN::loadComponent(), LEGACY_PLUGIN::loadMODULE(), LEGACY_PLUGIN::loadPCB_TARGET(), LEGACY_PLUGIN::loadPCB_TEXT(), LEGACY_PLUGIN::loadTrackList(), NETLIST_EXPORTER_GENERIC::makeComponents(), SCH_EDIT_FRAME::mapExistingAnnotation(), SCH_ITEM::operator<(), SCH_COMPONENT::operator<(), PCB_PARSER::parseDIMENSION(), SCH_EDITOR_CONTROL::Paste(), SCH_SHEET_PATH::PathAsString(), SCH_SCREENS::ReplaceDuplicateTimeStamps(), SCH_COMPONENT::ReplaceInstanceSheetPath(), SCH_LEGACY_PLUGIN::saveComponent(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_EDIT_FRAME::SaveProject(), SCH_SEXPR_PLUGIN::saveSheet(), SCH_LEGACY_PLUGIN::saveSheet(), SCH_SEXPR_PLUGIN::saveSymbol(), SCH_COMPONENT::SCH_COMPONENT(), SCH_REFERENCE::SCH_REFERENCE(), SCH_SHEET::SCH_SHEET(), RC_ITEM::SetItems(), SwapItemData(), DIALOG_SCH_SHEET_PROPS::TransferDataToWindow(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::TransferDataToWindow(), and NETLIST_EXPORTER_ORCADPCB2::WriteNetlist().

◆ ZeroOffset

wxPoint BOARD_ITEM::ZeroOffset
static

A value of wxPoint(0,0) which can be passed to the Draw() functions.

Definition at line 134 of file class_board_item.h.

Referenced by BOARD::GetPosition().


The documentation for this class was generated from the following files: