KiCad PCB EDA Suite
NETINFO_ITEM Class Reference

Class NETINFO_ITEM handles the data for a net. More...

#include <netinfo.h>

Inheritance diagram for NETINFO_ITEM:
BOARD_ITEM EDA_ITEM KIGFX::VIEW_ITEM

Public Member Functions

 NETINFO_ITEM (BOARD *aParent, const wxString &aNetName=wxEmptyString, int aNetCode=-1)
 NETINFO_ITEM class, to handle info on nets: netnames, net constraints. More...
 
 ~NETINFO_ITEM ()
 
wxString GetClass () const override
 Function GetClass returns the class name. More...
 
const wxPoint GetPosition () const override
 
void SetPosition (const wxPoint &aPos) override
 
void SetClass (const NETCLASSPTR &aNetClass)
 Function SetClass sets aNetclass into this NET. More...
 
NETCLASSPTR GetNetClass ()
 
wxString GetClassName () const
 Function GetClassName returns the class name. More...
 
int GetTrackWidth ()
 Function GetTrackWidth returns the width of tracks used to route this net. More...
 
int GetViaSize ()
 Function GetViaSize returns the size of vias used to route this net. More...
 
int GetMicroViaSize ()
 Function GetMicroViaSize returns the size of vias used to route this net. More...
 
int GetViaDrillSize ()
 Function GetViaDrillSize returns the size of via drills used to route this net. More...
 
int GetMicroViaDrillSize ()
 Function GetViaDrillSize returns the size of via drills used to route this net. More...
 
int GetClearance (BOARD_ITEM *aBoardItem)
 Function GetClearance returns the clearance when routing near aBoardItem. More...
 
void Draw (EDA_DRAW_PANEL *panel, wxDC *DC, GR_DRAWMODE aDrawMode, const wxPoint &offset) override
 Function Draw. More...
 
int GetNet () const
 Function GetNet. More...
 
void SetNetCode (int aNetCode)
 
const wxString & GetNetname () const
 Function GetNetname. More...
 
const wxString & GetShortNetname () const
 Function GetShortNetname. More...
 
void GetMsgPanelInfo (std::vector< MSG_PANEL_ITEM > &aList) override
 Function GetMsgPanelInfo returns the information about the NETINFO_ITEM in aList to display in the message panel. More...
 
void Clear ()
 Function Clear sets all fields to their defaults values. More...
 
BOARDGetParent () const
 
virtual const wxPoint GetCenter () const
 Function GetCenter() More...
 
virtual bool IsConnected () const
 Function IsConnected() Returns information if the object is derived from BOARD_CONNECTED_ITEM. More...
 
BOARD_ITEMNext () const
 
BOARD_ITEMBack () const
 
virtual PCB_LAYER_ID GetLayer () const
 Function GetLayer returns the primary layer this item is on. More...
 
virtual LSET GetLayerSet () const
 Function GetLayerSet returns a "layer mask", which is a bitmap of all layers on which the TRACK segment or VIA physically resides. More...
 
virtual void SetLayer (PCB_LAYER_ID aLayer)
 Function SetLayer sets the layer this item is on. More...
 
virtual void SwapData (BOARD_ITEM *aImage)
 Swap data between aItem and aImage. More...
 
virtual bool IsOnLayer (PCB_LAYER_ID aLayer) const
 Function IsOnLayer tests to see if this object is on the given layer. More...
 
bool IsTrack () const
 Function IsTrack tests to see if this object is a track or via (or microvia). More...
 
virtual bool IsLocked () const
 Function IsLocked. More...
 
virtual void SetLocked (bool aLocked)
 Function SetLocked modifies 'lock' status for of the item. More...
 
virtual void UnLink ()
 Function UnLink detaches this object from its owner. More...
 
void DeleteStructure ()
 Function DeleteStructure deletes this object after UnLink()ing it from its owner if it has one. More...
 
virtual void Move (const wxPoint &aMoveVector)
 Function Move move this object. More...
 
void Move (const VECTOR2I &aMoveVector)
 
virtual void Rotate (const wxPoint &aRotCentre, double aAngle)
 Function Rotate Rotate this object. More...
 
void Rotate (const VECTOR2I &aRotCentre, double aAngle)
 
virtual void Flip (const wxPoint &aCentre)
 Function Flip Flip this object, i.e. More...
 
void Flip (const VECTOR2I &aCentre)
 
virtual BOARDGetBoard () const
 Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none. More...
 
wxString GetLayerName () const
 Function GetLayerName returns the name of the PCB layer on which the item resides. More...
 
virtual bool HitTest (const wxPoint &aPosition) const override
 Function HitTest tests if aPosition is contained within or on the bounding area of an item. More...
 
virtual bool HitTest (const EDA_RECT &aRect, bool aContained=true, int aAccuracy=0) const
 Function HitTest tests if the aRect intersects or contains this object (depending on aContained). More...
 
virtual void ViewGetLayers (int aLayers[], int &aCount) const override
 Function ViewGetLayers() Returns the all the layers within the VIEW the object is painted on. More...
 
virtual void TransformShapeWithClearanceToPolygon (SHAPE_POLY_SET &aCornerBuffer, int aClearanceValue, int aCircleToSegmentsCount, double aCorrectionFactor) const
 
KICAD_T Type () const
 Function Type() More...
 
void SetTimeStamp (timestamp_t aNewTimeStamp)
 
timestamp_t GetTimeStamp () const
 
DHEADGetList () const
 
void SetNext (EDA_ITEM *aNext)
 
void SetBack (EDA_ITEM *aBack)
 
void SetParent (EDA_ITEM *aParent)
 
void SetList (DHEAD *aList)
 
bool IsNew () const
 
bool IsModified () const
 
bool IsMoving () const
 
bool IsDragging () const
 
bool IsWireImage () const
 
bool IsSelected () const
 
bool IsResized () const
 
bool IsHighlighted () const
 
bool IsBrightened () const
 
void SetWireImage ()
 
void SetSelected ()
 
void SetHighlighted ()
 
void SetBrightened ()
 
void ClearSelected ()
 
void ClearHighlighted ()
 
void ClearBrightened ()
 
void SetModified ()
 
int GetState (int type) const
 
void SetState (int type, int state)
 
STATUS_FLAGS GetStatus () const
 
void SetStatus (STATUS_FLAGS aStatus)
 
void SetFlags (STATUS_FLAGS aMask)
 
void ClearFlags (STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
 
STATUS_FLAGS GetFlags () const
 
void SetForceVisible (bool aEnable)
 Function SetForceVisible is used to set and cleag force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible. More...
 
virtual const EDA_RECT GetBoundingBox () const
 Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes. More...
 
virtual EDA_ITEMClone () const
 Function Clone creates a duplicate of this item with linked list members set to NULL. More...
 
virtual SEARCH_RESULT Visit (INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 Function Visit may be re-implemented for each derived class in order to handle all the types given by its member data. More...
 
virtual wxString GetSelectMenuText () const
 Function GetSelectMenuText returns the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position. More...
 
virtual BITMAP_DEF GetMenuImage () const
 Function GetMenuImage returns a pointer to an image to be used in menus. More...
 
virtual bool Matches (wxFindReplaceData &aSearchData, void *aAuxData, wxPoint *aFindLocation)
 Function Matches compares the item against the search criteria in aSearchData. More...
 
bool Replace (wxFindReplaceData &aSearchData, wxString &aText)
 Helper function used in search and replace dialog Function Replace performs a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace. More...
 
virtual bool Replace (wxFindReplaceData &aSearchData, void *aAuxData=NULL)
 Function Replace performs a text replace using the find and replace criteria in aSearchData on items that support text find and replace. More...
 
virtual bool IsReplaceable () const
 Function IsReplaceable. More...
 
bool operator< (const EDA_ITEM &aItem) const
 Test if another item is less than this object. More...
 
virtual const BOX2I ViewBBox () const override
 Function ViewBBox() returns the bounding box of the item covering all its layers. More...
 
virtual void ViewDraw (int aLayer, VIEW *aView) const
 Function ViewDraw() Draws the parts of the object belonging to layer aLayer. More...
 
virtual unsigned int ViewGetLOD (int aLayer, VIEW *aView) const
 Function ViewGetLOD() Returns the level of detail (LOD) of the item. More...
 
VIEW_ITEM_DATA * viewPrivData () const
 

Static Public Member Functions

static bool ClassOf (const EDA_ITEM *aItem)
 
static wxString ShowShape (STROKE_T aShape)
 Function ShowShape converts the enum STROKE_T integer value to a wxString. More...
 
static std::string FormatInternalUnits (int aValue)
 Function FormatInternalUnits converts aValue from board internal units to a string appropriate for writing to file. More...
 
static std::string FormatInternalUnits (const wxPoint &aPoint)
 
static std::string FormatInternalUnits (const VECTOR2I &aPoint)
 
static std::string FormatInternalUnits (const wxSize &aSize)
 
static std::string FormatAngle (double aAngle)
 Function FormatAngle converts aAngle from board units to a string appropriate for writing to file. More...
 
static SEARCH_RESULT IterateForward (EDA_ITEM *listStart, INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
 Function IterateForward walks through the object tree calling the inspector() on each object type requested in scanTypes. More...
 
static bool Sort (const EDA_ITEM *aLeft, const EDA_ITEM *aRight)
 Function Sort is a helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers. More...
 

Static Public Attributes

static wxPoint ZeroOffset
 A value of wxPoint(0,0) which can be passed to the Draw() functions. More...
 

Protected Member Functions

bool Matches (const wxString &aText, wxFindReplaceData &aSearchData)
 Function Matches compares aText against search criteria in aSearchData. More...
 

Static Protected Member Functions

static int getTrailingInt (const wxString &aStr)
 
static int getNextNumberInSequence (const std::set< int > &aSeq, bool aFillSequenceGaps)
 

Protected Attributes

PCB_LAYER_ID m_Layer
 
EDA_ITEMPnext
 next in linked list More...
 
EDA_ITEMPback
 previous in linked list More...
 
DHEADm_List
 which DLIST I am on. More...
 
EDA_ITEMm_Parent
 Linked list: Link (parent struct) More...
 
timestamp_t m_TimeStamp
 Time stamp used for logical links. More...
 
bool m_forceVisible
 Set to true to override the visibility setting of the item. More...
 
STATUS_FLAGS m_Flags
 Flag bits for editing and other uses. More...
 

Private Attributes

int m_NetCode
 A number equivalent to the net name. More...
 
wxString m_Netname
 Full net name like /mysheet/mysubsheet/vout used by Eeschema. More...
 
wxString m_ShortNetname
 short net name, like vout from /mysheet/mysubsheet/vout More...
 
NETCLASSPTR m_NetClass
 
BOARDm_parent
 The parent board the net belongs to. More...
 

Friends

class NETINFO_LIST
 

Detailed Description

Class NETINFO_ITEM handles the data for a net.

Definition at line 69 of file netinfo.h.

Constructor & Destructor Documentation

NETINFO_ITEM::NETINFO_ITEM ( BOARD aParent,
const wxString &  aNetName = wxEmptyString,
int  aNetCode = -1 
)

NETINFO_ITEM class, to handle info on nets: netnames, net constraints.

Definition at line 51 of file netinfo_item.cpp.

References NETCLASSES::GetDefault(), BOARD::GetDesignSettings(), m_NetClass, BOARD_DESIGN_SETTINGS::m_NetClasses, and m_parent.

51  :
52  BOARD_ITEM( aParent, PCB_NETINFO_T ),
53  m_NetCode( aNetCode ), m_Netname( aNetName ), m_ShortNetname( m_Netname.AfterLast( '/' ) )
54 {
55  m_parent = aParent;
56 
57  if( aParent )
59  else
60  m_NetClass = std::make_shared<NETCLASS>( "<invalid>" );
61 }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
BOARD * m_parent
The parent board the net belongs to.
Definition: netinfo.h:83
BOARD_DESIGN_SETTINGS & GetDesignSettings() const
Function GetDesignSettings.
Definition: class_board.h:532
int m_NetCode
A number equivalent to the net name.
Definition: netinfo.h:74
BOARD_ITEM(BOARD_ITEM *aParent, KICAD_T idtype)
wxString m_Netname
Full net name like /mysheet/mysubsheet/vout used by Eeschema.
Definition: netinfo.h:77
class NETINFO_ITEM, a description of a net
Definition: typeinfo.h:104
NETCLASSPTR GetDefault() const
Function GetDefault.
Definition: netclass.h:275
wxString m_ShortNetname
short net name, like vout from /mysheet/mysubsheet/vout
Definition: netinfo.h:79
NETCLASSES m_NetClasses
List of current netclasses. There is always the default netclass.
NETINFO_ITEM::~NETINFO_ITEM ( )

Definition at line 64 of file netinfo_item.cpp.

65 {
66  // m_NetClass is not owned by me.
67 }

Member Function Documentation

BOARD_ITEM* BOARD_ITEM::Back ( ) const
inlineinherited

Definition at line 117 of file class_board_item.h.

References EDA_ITEM::Pback.

Referenced by PCB_EDIT_FRAME::Delete_Segment_Edge(), and SwapItemData().

117 { return static_cast<BOARD_ITEM*>( Pback ); }
EDA_ITEM * Pback
previous in linked list
Definition: base_struct.h:194
Class BOARD_ITEM is a base class for any item which can be embedded within the BOARD container class...
static bool NETINFO_ITEM::ClassOf ( const EDA_ITEM aItem)
inlinestatic

Definition at line 90 of file netinfo.h.

References PCB_T, and EDA_ITEM::Type().

91  {
92  return aItem && PCB_T == aItem->Type();
93  }
KICAD_T Type() const
Function Type()
Definition: base_struct.h:227
Definition: typeinfo.h:85
void NETINFO_ITEM::Clear ( )
inline

Function Clear sets all fields to their defaults values.

Definition at line 256 of file netinfo.h.

257  {
258  SetClass( NETCLASSPTR() );
259  }
void SetClass(const NETCLASSPTR &aNetClass)
Function SetClass sets aNetclass into this NET.
void EDA_ITEM::ClearBrightened ( )
inlineinherited

Definition at line 262 of file base_struct.h.

References BRIGHTENED, EDA_ITEM::ClearFlags(), and EDA_ITEM::SetModified().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), and SELECTION_TOOL::disambiguationMenu().

262 { ClearFlags( BRIGHTENED ); }
#define BRIGHTENED
item is drawn with a bright contour
Definition: base_struct.h:151
void ClearFlags(STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
Definition: base_struct.h:283
void EDA_ITEM::ClearFlags ( STATUS_FLAGS  aMask = EDA_ITEM_ALL_FLAGS)
inlineinherited

Definition at line 283 of file base_struct.h.

Referenced by Abort_Edit_Pcb_Text(), Abort_EditEdge(), Abort_Move_ModuleOutline(), Abort_Move_Pad(), Abort_MoveOrCopyModule(), Abort_MoveTrack(), Abort_Zone_Create_Outline(), Abort_Zone_Move_Corner_Or_Outlines(), AbortMoveAndEditTarget(), abortMoveBitmap(), AbortMoveDimensionText(), abortMoveItem(), AbortMoveTextModule(), AbortPinMove(), SCH_SCREEN::addConnectedItemsToBlock(), SCH_EDIT_FRAME::addCurrentItemToList(), PNS_KICAD_IFACE::AddItem(), PCB_EDIT_FRAME::AppendBoardFile(), PCB_EDIT_FRAME::Begin_DrawSegment(), FOOTPRINT_EDIT_FRAME::Begin_Edge_Module(), PCB_EDIT_FRAME::Begin_Zone(), SCH_EDIT_FRAME::BeginSegment(), PCB_EDIT_FRAME::Block_Delete(), PCB_EDIT_FRAME::Block_Flip(), PCB_EDIT_FRAME::Block_Move(), PCB_EDIT_FRAME::Change_Side_Module(), SCH_SCREEN::ClearAnnotation(), EDA_ITEM::ClearBrightened(), EDA_ITEM::ClearHighlighted(), DRAG_LIST::ClearList(), ClearMarkItems(), clearModuleItemFlags(), EDA_ITEM::ClearSelected(), SCH_EDIT_FRAME::ConvertPart(), SCH_EDIT_FRAME::copyBlockItems(), CopyMarkedItems(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::copyPanelToOptions(), MWAVE::CreateMicrowaveInductor(), FOOTPRINT_EDIT_FRAME::CreateTextModule(), PCB_EDIT_FRAME::Delete_LastCreatedCorner(), PCB_EDIT_FRAME::Delete_Segment_Edge(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), PCB_EDIT_FRAME::EditDimension(), PCB_EDIT_FRAME::End_Edge(), FOOTPRINT_EDIT_FRAME::End_Edge_Module(), PCB_EDIT_FRAME::End_Move_Zone_Corner_Or_Outlines(), PCB_EDIT_FRAME::End_Zone(), EraseDragList(), PCB_EDIT_FRAME::Exchange_Module(), ExitSheet(), SCH_SCREEN::GetConnection(), PCB_BASE_FRAME::GlobalChange_PadSettings(), PCB_BASE_FRAME::Import_Pad_Settings(), SCH_JUNCTION::IsSelectStateChanged(), SCH_NO_CONNECT::IsSelectStateChanged(), SCH_MARKER::IsSelectStateChanged(), SCH_BUS_ENTRY_BASE::IsSelectStateChanged(), SCH_BITMAP::IsSelectStateChanged(), SCH_LINE::IsSelectStateChanged(), SCH_TEXT::IsSelectStateChanged(), SCH_SHEET::IsSelectStateChanged(), SCH_COMPONENT::IsSelectStateChanged(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), SCH_EAGLE_PLUGIN::loadSheet(), MarkItemsInBloc(), MirrorX(), MirrorY(), moveBitmap(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), LIB_EDIT_FRAME::OnEditPin(), FOOTPRINT_EDIT_FRAME::OnLeftClick(), SCH_EDIT_FRAME::OnLeftClick(), PCB_EDIT_FRAME::OnLeftClick(), LIB_EDIT_FRAME::OnRotateItem(), SCH_EDIT_FRAME::OnSelectUnit(), FOOTPRINT_EDIT_FRAME::OpenProjectFiles(), SCH_FIELD::Place(), PCB_EDIT_FRAME::Place_DrawItem(), FOOTPRINT_EDIT_FRAME::Place_EdgeMod(), PCB_EDIT_FRAME::Place_Texte_Pcb(), PCBNEW_CONTROL::placeBoardItems(), PCB_EDIT_FRAME::PlaceDimensionText(), PCB_EDIT_FRAME::PlaceDraggedOrMovedTrackSegment(), PCB_BASE_FRAME::PlaceModule(), PCB_BASE_FRAME::PlacePad(), PCB_EDIT_FRAME::PlaceTarget(), DRAWING_TOOL::PlaceText(), PCB_BASE_FRAME::PlaceTexteModule(), FOOTPRINT_EDIT_FRAME::Process_Special_Functions(), LIB_EDIT_FRAME::Process_Special_Functions(), EDIT_TOOL::Properties(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_FRAME::RepeatDrawItem(), LIB_EDIT_FRAME::RepeatPinItem(), BOARD_COMMIT::Revert(), PCB_BASE_FRAME::Rotate_Module(), RotateListOfItems(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SCH_LEGACY_PLUGIN_CACHE::savePin(), FOOTPRINT_VIEWER_FRAME::SelectCurrentFootprint(), SCH_EDIT_FRAME::SetRepeatItem(), PCB_EDIT_FRAME::Start_DragTrackSegmentAndKeepSlope(), PCB_EDIT_FRAME::StartMoveModule(), PCB_EDIT_FRAME::StartMoveOneNodeOrSegment(), and DIALOG_PAD_PROPERTIES::TransferDataFromWindow().

283 { m_Flags &= ~aMask; }
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
void EDA_ITEM::ClearHighlighted ( )
inlineinherited

Definition at line 261 of file base_struct.h.

References EDA_ITEM::ClearFlags(), and HIGHLIGHTED.

261 { ClearFlags( HIGHLIGHTED ); }
#define HIGHLIGHTED
item is drawn in normal colors, when the rest is darkened
Definition: base_struct.h:150
void ClearFlags(STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
Definition: base_struct.h:283
void EDA_ITEM::ClearSelected ( )
inlineinherited
EDA_ITEM * EDA_ITEM::Clone ( ) const
virtualinherited

Function Clone creates a duplicate of this item with linked list members set to NULL.

The default version will return NULL in release builds and likely crash the program. In debug builds, a warning message indicating the derived class has not implemented cloning. This really should be a pure virtual function. Due to the fact that there are so many objects derived from EDA_ITEM, the decision was made to return NULL until all the objects derived from EDA_ITEM implement cloning. Once that happens, this function should be made pure.

Returns
A clone of the item.

Reimplemented in D_PAD, SCH_COMPONENT, MODULE, ZONE_CONTAINER, SCH_SHEET, LIB_PIN, VIA, SEGZONE, SCH_HIERLABEL, SCH_GLOBALLABEL, TRACK, SCH_LABEL, DRAWSEGMENT, LIB_FIELD, DIMENSION, TEXTE_MODULE, SCH_TEXT, SCH_FIELD, SCH_SHEET_PIN, SCH_LINE, SCH_BUS_BUS_ENTRY, LIB_ARC, SCH_BUS_WIRE_ENTRY, SCH_BITMAP, TEXTE_PCB, LIB_TEXT, EDGE_MODULE, LIB_POLYLINE, LIB_RECTANGLE, LIB_BEZIER, LIB_CIRCLE, SCH_MARKER, SCH_NO_CONNECT, PCB_TARGET, SCH_JUNCTION, and KIGFX::ORIGIN_VIEWITEM.

Definition at line 125 of file base_struct.cpp.

References EDA_ITEM::GetClass().

Referenced by PCB_EDIT_FRAME::Block_Duplicate(), SCH_BUS_WIRE_ENTRY::CanConnect(), SCH_BUS_BUS_ENTRY::CanConnect(), CopyMarkedItems(), LIB_PART::CopySelectedItems(), LIB_EDIT_FRAME::copySelectedItems(), BOARD::Duplicate(), DuplicateStruct(), SCH_SCREEN::ExtractWires(), EDA_ITEM::HitTest(), LIB_PART::LIB_PART(), LIB_EDIT_FRAME::LoadOneSymbol(), new_clone(), SCH_EDIT_FRAME::OnCopySchematicItemRequest(), LIB_EDIT_FRAME::pasteClipboard(), SCH_EDIT_FRAME::RepeatDrawItem(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), LIB_PART::SetConversion(), SCH_EDIT_FRAME::SetRepeatItem(), SCH_EDIT_FRAME::SetUndoItem(), LIB_PART::SetUnitCount(), and COMMIT::Stage().

126 {
127  wxCHECK_MSG( false, NULL, wxT( "Clone not implemented in derived class " ) + GetClass() +
128  wxT( ". Bad programmer!" ) );
129 }
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void BOARD_ITEM::DeleteStructure ( )
inherited
void NETINFO_ITEM::Draw ( EDA_DRAW_PANEL panel,
wxDC *  DC,
GR_DRAWMODE  aDrawMode,
const wxPoint offset 
)
overridevirtual

Function Draw.

Function Draw (TODO)

Todo:
we actually could show a NET, simply show all the tracks and a pads or net name on pad and vias

Implements BOARD_ITEM.

Definition at line 73 of file netinfo_item.cpp.

77 {
78 }
virtual void BOARD_ITEM::Flip ( const wxPoint aCentre)
inlinevirtualinherited

Function Flip Flip this object, i.e.

change the board side for this object

Parameters
aCentre- the rotation point.

Reimplemented in VIA, ZONE_CONTAINER, D_PAD, MODULE, DRAWSEGMENT, DIMENSION, TRACK, TEXTE_MODULE, EDGE_MODULE, MARKER_PCB, PCB_TARGET, and TEXTE_PCB.

Definition at line 265 of file class_board_item.h.

References EDA_ITEM::GetClass().

Referenced by PCB_EDIT_FRAME::Block_Flip(), BOARD_ITEM::Flip(), and PCB_BASE_EDIT_FRAME::PutDataInPreviousState().

266  {
267  wxMessageBox( wxT( "virtual BOARD_ITEM::Flip used, should not occur" ), GetClass() );
268  }
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void BOARD_ITEM::Flip ( const VECTOR2I aCentre)
inlineinherited

Definition at line 270 of file class_board_item.h.

References BOARD_ITEM::Flip(), BOARD_ITEM::GetBoard(), BOARD_ITEM::GetLayerName(), VECTOR2< T >::x, and VECTOR2< T >::y.

271  {
272  Flip( wxPoint( aCentre.x, aCentre.y ) );
273  }
virtual void Flip(const wxPoint &aCentre)
Function Flip Flip this object, i.e.
std::string BOARD_ITEM::FormatAngle ( double  aAngle)
staticinherited

Function FormatAngle converts aAngle from board units to a string appropriate for writing to file.

Note
Internal angles for board items can be either degrees or tenths of degree on how KiCad is built.
Parameters
aAngleA angle value to convert.
Returns
A std::string object containing the converted angle.

Definition at line 171 of file class_board_item.cpp.

Referenced by BOARD_ITEM::HitTest().

172 {
173  char temp[50];
174 
175  int len = snprintf( temp, sizeof(temp), "%.10g", aAngle / 10.0 );
176 
177  return std::string( temp, len );
178 }
std::string BOARD_ITEM::FormatInternalUnits ( int  aValue)
staticinherited

Function FormatInternalUnits converts aValue from board internal units to a string appropriate for writing to file.

Note
Internal units for board items can be either deci-mils or nanometers depending on how KiCad is build.
Parameters
aValueA coordinate value to convert.
Returns
A std::string object containing the converted value.

Definition at line 90 of file class_board_item.cpp.

Referenced by checkConnectedTo(), ConvertOutlineToPolygon(), BOARD_ITEM::FormatInternalUnits(), BOARD_ITEM::HitTest(), and BOARD::TracksInNetBetweenPoints().

91 {
92 #if 1
93 
94  char buf[50];
95  int len;
96  double mm = aValue / IU_PER_MM;
97 
98  if( mm != 0.0 && fabs( mm ) <= 0.0001 )
99  {
100  len = sprintf( buf, "%.10f", mm );
101 
102  while( --len > 0 && buf[len] == '0' )
103  buf[len] = '\0';
104 
105  if( buf[len] == '.' )
106  buf[len] = '\0';
107  else
108  ++len;
109  }
110  else
111  {
112  len = sprintf( buf, "%.10g", mm );
113  }
114 
115  return std::string( buf, len );
116 
117 #else
118 
119  // Assume aValue is in nanometers, and that we want the result in millimeters,
120  // and that int is 32 bits wide. Then perform an alternative algorithm.
121  // Can be used to verify that the above algorithm is correctly generating text.
122  // Convert aValue into an integer string, then insert a decimal point manually.
123  // Results are the same as above general purpose algorithm.
124 
125  wxASSERT( sizeof(int) == 4 );
126 
127  if( aValue == 0 )
128  return std::string( 1, '0' );
129  else
130  {
131  char buf[50];
132  int len = sprintf( buf, aValue > 0 ? "%06d" : "%07d", aValue ); // optionally pad w/leading zeros
133 
134  std::string ret( buf, len );
135 
136  std::string::iterator it = ret.end() - 1; // last byte
137 
138  // insert '.' at 6 positions from end, dividing by 10e6 (a million), nm => mm
139  std::string::iterator decpoint = ret.end() - 6;
140 
141  // truncate trailing zeros, up to decimal point position
142  for( ; *it=='0' && it >= decpoint; --it )
143  ret.erase( it ); // does not invalidate iterators it or decpoint
144 
145  if( it >= decpoint )
146  {
147  ret.insert( decpoint, '.' );
148 
149  // decpoint is invalidated here, after insert()
150 
151 #if 1 // want a leading zero when decimal point is in first position?
152  if( ret[0] == '.' )
153  {
154  // insert leading zero ahead of decimal point.
155  ret.insert( ret.begin(), '0' );
156  }
157  else if( ret[0]=='-' && ret[1]=='.' )
158  {
159  ret.insert( ret.begin() + 1, '0' );
160  }
161 #endif
162  }
163 
164  return ret;
165  }
166 
167 #endif
168 }
std::string BOARD_ITEM::FormatInternalUnits ( const wxPoint aPoint)
staticinherited

Definition at line 181 of file class_board_item.cpp.

References BOARD_ITEM::FormatInternalUnits(), wxPoint::x, and wxPoint::y.

182 {
183  return FormatInternalUnits( aPoint.x ) + " " + FormatInternalUnits( aPoint.y );
184 }
static std::string FormatInternalUnits(int aValue)
Function FormatInternalUnits converts aValue from board internal units to a string appropriate for wr...
std::string BOARD_ITEM::FormatInternalUnits ( const VECTOR2I aPoint)
staticinherited

Definition at line 187 of file class_board_item.cpp.

References BOARD_ITEM::FormatInternalUnits(), VECTOR2< T >::x, and VECTOR2< T >::y.

188 {
189  return FormatInternalUnits( aPoint.x ) + " " + FormatInternalUnits( aPoint.y );
190 }
static std::string FormatInternalUnits(int aValue)
Function FormatInternalUnits converts aValue from board internal units to a string appropriate for wr...
std::string BOARD_ITEM::FormatInternalUnits ( const wxSize &  aSize)
staticinherited

Definition at line 193 of file class_board_item.cpp.

References BOARD_ITEM::FormatInternalUnits().

194 {
195  return FormatInternalUnits( aSize.GetWidth() ) + " " + FormatInternalUnits( aSize.GetHeight() );
196 }
static std::string FormatInternalUnits(int aValue)
Function FormatInternalUnits converts aValue from board internal units to a string appropriate for wr...
BOARD * BOARD_ITEM::GetBoard ( ) const
virtualinherited

Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.

Definition at line 64 of file class_board_item.cpp.

References BOARD_ITEM::GetBoard(), BOARD_ITEM::GetParent(), PCB_T, and EDA_ITEM::Type().

Referenced by DIALOG_GEN_FOOTPRINT_POSITION::CreateFiles(), DeleteMarkedItems(), TEXTE_PCB::Draw(), PCB_TARGET::Draw(), EDGE_MODULE::Draw(), ZONE_CONTAINER::Draw(), TEXTE_MODULE::Draw(), TRACK::Draw(), DIMENSION::Draw(), DRAWSEGMENT::Draw(), MODULE::Draw(), SEGZONE::Draw(), VIA::Draw(), MODULE::DrawAncre(), ZONE_CONTAINER::DrawFilledArea(), BOARD_PRINTOUT_CONTROLLER::DrawPage(), EVT_COMMAND_RANGE(), TEXTE_PCB::Flip(), TRACK::Flip(), BOARD_ITEM::Flip(), ZONE_CONTAINER::Flip(), VIA::Flip(), BOARD_ITEM::GetBoard(), GAL_ARRAY_CREATOR::getBoard(), LEGACY_ARRAY_CREATOR::getBoard(), MODULE::GetBoundingBox(), MODULE::GetBoundingPoly(), BOARD_ITEM::GetLayerName(), TRACK::GetMsgPanelInfo(), GetMsgPanelInfo(), D_PAD::GetMsgPanelInfo(), TRACK::GetMsgPanelInfoBase(), SEGZONE::GetMsgPanelInfoBase(), VIA::GetMsgPanelInfoBase(), TRACK::GetMsgPanelInfoBase_Common(), BOARD_CONNECTED_ITEM::GetNetClass(), TRACK::GetSelectMenuText(), SEGZONE::GetSelectMenuText(), VIA::GetSelectMenuText(), ZONE_CONTAINER::GetSelectMenuText(), D_PAD::GetSelectMenuText(), D_PAD::GetSolderMaskMargin(), D_PAD::GetSolderPasteMargin(), PushTrack(), BOARD_CONNECTED_ITEM::SetNet(), BOARD_CONNECTED_ITEM::SetNetCode(), VIA::ViewGetLOD(), and D_PAD::ViewGetLOD().

65 {
66  if( Type() == PCB_T )
67  return (BOARD*) this;
68 
69  BOARD_ITEM* parent = GetParent();
70 
71  if( parent )
72  return parent->GetBoard();
73 
74  return NULL;
75 }
KICAD_T Type() const
Function Type()
Definition: base_struct.h:227
BOARD_ITEM_CONTAINER * GetParent() const
Definition: typeinfo.h:85
Class BOARD_ITEM is a base class for any item which can be embedded within the BOARD container class...
Class BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:169
virtual BOARD * GetBoard() const
Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.
const EDA_RECT EDA_ITEM::GetBoundingBox ( ) const
virtualinherited

Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes.

This box should be an enclosing perimeter for visible components of this object, and the units should be in the pcb or schematic coordinate system. It is OK to overestimate the size by a few counts.

Reimplemented in BOARD, D_PAD, SCH_SHEET, LIB_PART, SCH_HIERLABEL, SCH_COMPONENT, SCH_GLOBALLABEL, LIB_ITEM, SCH_LABEL, GERBER_DRAW_ITEM, DIMENSION, DRAWSEGMENT, LIB_FIELD, TEXTE_MODULE, MODULE, ZONE_CONTAINER, SCH_TEXT, LIB_PIN, TEXTE_PCB, TRACK, MARKER_PCB, SCH_LINE, GBR_LAYOUT, LIB_ARC, SCH_FIELD, LIB_TEXT, SCH_BITMAP, PCB_TARGET, SCH_BUS_ENTRY_BASE, LIB_BEZIER, LIB_POLYLINE, LIB_RECTANGLE, LIB_CIRCLE, SCH_MARKER, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 112 of file base_struct.cpp.

Referenced by PCB_EDIT_FRAME::AppendBoardFile(), MODULE::CoverageRatio(), SCH_EDIT_FRAME::DeleteItem(), SELECTION_TOOL::findCallback(), getAnchorPoint(), LIB_ITEM::GetBoundingBox(), GetBoundingBoxes(), getRect(), EDA_ITEM::HitTest(), SCH_EAGLE_PLUGIN::loadSheet(), and EDA_ITEM::ViewBBox().

113 {
114 #if defined(DEBUG)
115  printf( "Missing GetBoundingBox()\n" );
116  Show( 0, std::cout ); // tell me which classes still need GetBoundingBox support
117 #endif
118 
119  // return a zero-sized box per default. derived classes should override
120  // this
121  return EDA_RECT( wxPoint( 0, 0 ), wxSize( 0, 0 ) );
122 }
Class EDA_RECT handles the component boundary box.
Definition: eda_rect.h:44
virtual const wxPoint BOARD_ITEM::GetCenter ( ) const
inlinevirtualinherited

Function GetCenter()

This defaults to the same point as returned by GetPosition(), unless overridden

Returns
centre point of the item

Reimplemented in DRAWSEGMENT.

Definition at line 97 of file class_board_item.h.

References BOARD_ITEM::GetPosition(), and BOARD_ITEM::SetPosition().

Referenced by BOARD::chainMarkedSegments(), DIALOG_CREATE_ARRAY::ARRAY_CIRCULAR_OPTIONS::TransformItem(), and DRAWSEGMENT::TransformShapeWithClearanceToPolygon().

97 { return GetPosition(); }
virtual const wxPoint GetPosition() const =0
wxString NETINFO_ITEM::GetClass ( ) const
inlineoverridevirtual

Function GetClass returns the class name.

Returns
wxString

Implements EDA_ITEM.

Definition at line 95 of file netinfo.h.

96  {
97  return wxT( "NETINFO_ITEM" );
98  }
wxString NETINFO_ITEM::GetClassName ( ) const
inline

Function GetClassName returns the class name.

Definition at line 131 of file netinfo.h.

References NETCLASS::Default.

Referenced by ROUTER_TOOL::getNetclassDimensions(), PNS::SIZES_SETTINGS::Init(), PNS_PCBNEW_RULE_RESOLVER::PNS_PCBNEW_RULE_RESOLVER(), and BOARD::SynchronizeNetsAndNetClasses().

132  {
133  return m_NetClass ? m_NetClass->GetName() : NETCLASS::Default;
134  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
static const char Default[]
the name of the default NETCLASS
Definition: netclass.h:90
int NETINFO_ITEM::GetClearance ( BOARD_ITEM aBoardItem)
inline

Function GetClearance returns the clearance when routing near aBoardItem.

Definition at line 207 of file netinfo.h.

208  {
209  wxASSERT( m_NetClass );
210  return m_NetClass->GetClearance();
211  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
STATUS_FLAGS EDA_ITEM::GetFlags ( ) const
inlineinherited

Definition at line 284 of file base_struct.h.

References EDA_ITEM::m_Flags.

Referenced by AbortMoveAndEditTarget(), SCH_SCREEN::addConnectedItemsToBlock(), AddMenusForBitmap(), AddMenusForBusEntry(), AddMenusForComponent(), AddMenusForComponentField(), AddMenusForEditComponent(), AddMenusForGLabel(), AddMenusForHierchicalSheet(), AddMenusForHLabel(), AddMenusForLabel(), AddMenusForSheetPin(), AddMenusForText(), SCH_EDIT_FRAME::BeginSegment(), SCH_EDIT_FRAME::ChangeTextOrient(), Collect_TrackSegmentsToDrag(), SCH_EDIT_FRAME::ConvertPart(), SCH_EDIT_FRAME::copyBlockItems(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::copyPanelToOptions(), LIB_EDIT_FRAME::copySelectedItems(), LIB_EDIT_FRAME::CreatePin(), PCB_EDIT_FRAME::createPopUpMenuForFootprints(), PCB_EDIT_FRAME::createPopUpMenuForFpPads(), PCB_EDIT_FRAME::createPopUpMenuForFpTexts(), PCB_EDIT_FRAME::createPopUpMenuForTexts(), PCB_EDIT_FRAME::createPopupMenuForTracks(), PCB_EDIT_FRAME::createPopUpMenuForZones(), PCB_EDIT_FRAME::Delete_Segment_Edge(), SCH_EDIT_FRAME::DeleteItem(), SCH_EDIT_FRAME::DeleteItemsInList(), SCH_EDIT_FRAME::DeleteJunction(), BOARD::Draw(), PCB_EDIT_FRAME::Edit_TrackSegm_Width(), SCH_EDIT_FRAME::EditComponentFieldText(), SCH_EDIT_FRAME::EditImage(), PCB_EDIT_FRAME::FlipTextePcb(), LIB_VIEW_FRAME::GeneralControl(), SCH_EDIT_FRAME::GeneralControl(), LIB_EDIT_FRAME::GetComponentFromRedoList(), LIB_EDIT_FRAME::GetComponentFromUndoList(), SCH_SCREEN::GetConnection(), InitialiseDragParameters(), EDA_DRAW_FRAME::isBusy(), Magnetize(), SCH_EDIT_FRAME::MirrorImage(), SCH_EDIT_FRAME::MirrorSheet(), moveBitmap(), SCH_EDIT_FRAME::OnAutoplaceFields(), SCH_EDIT_FRAME::OnConvertTextType(), SCH_EDIT_FRAME::OnCopySchematicItemRequest(), SCH_EDIT_FRAME::OnDragItem(), SCH_EDIT_FRAME::OnEditItem(), LIB_EDIT_FRAME::OnEditPin(), FOOTPRINT_EDIT_FRAME::OnHotKey(), SCH_EDIT_FRAME::OnHotKey(), PCB_EDIT_FRAME::OnHotKey(), PCB_EDIT_FRAME::OnHotkeyBeginRoute(), PCB_EDIT_FRAME::OnHotkeyCopyItem(), PCB_EDIT_FRAME::OnHotkeyDeleteItem(), PCB_EDIT_FRAME::OnHotkeyDuplicateOrArrayItem(), PCB_EDIT_FRAME::OnHotkeyEditItem(), PCB_EDIT_FRAME::OnHotkeyFlipItem(), PCB_EDIT_FRAME::OnHotkeyMoveItem(), PCB_EDIT_FRAME::OnHotkeyPlaceItem(), PCB_EDIT_FRAME::OnHotkeyRotateItem(), FOOTPRINT_EDIT_FRAME::OnLeftClick(), SCH_EDIT_FRAME::OnLeftClick(), PCB_EDIT_FRAME::OnLeftClick(), FOOTPRINT_EDIT_FRAME::OnLeftDClick(), SCH_EDIT_FRAME::OnLeftDClick(), PCB_EDIT_FRAME::OnLeftDClick(), EDA_DRAW_PANEL::OnMouseEvent(), SCH_EDIT_FRAME::OnMoveItem(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnOKButtonClick(), TARGET_PROPERTIES_DIALOG_EDITOR::OnOkClick(), SCH_EDIT_FRAME::OnOpenLibraryEditor(), SCH_EDIT_FRAME::OnOrient(), FOOTPRINT_EDIT_FRAME::OnRightClick(), GERBVIEW_FRAME::OnRightClick(), SCH_EDIT_FRAME::OnRightClick(), PCB_EDIT_FRAME::OnRightClick(), SCH_EDIT_FRAME::OnRotate(), SCH_EDIT_FRAME::OnSelectUnit(), SCH_EDIT_FRAME::OrientComponent(), PCBNEW_CONTROL::placeBoardItems(), PCB_EDIT_FRAME::PlaceTarget(), FOOTPRINT_EDIT_FRAME::PrepareItemForHotkey(), LIB_EDIT_FRAME::Process_Special_Functions(), EDIT_TOOL::Properties(), TRACKS_CLEANER::removeDuplicatesOfTrack(), PCB_BASE_FRAME::Rotate_Module(), PCB_EDIT_FRAME::Rotate_Texte_Pcb(), SCH_EDIT_FRAME::RotateField(), SCH_EDIT_FRAME::RotateHierarchicalSheet(), SCH_EDIT_FRAME::RotateImage(), PCB_BASE_FRAME::RotateTextModule(), LIB_EDIT_FRAME::SaveCopyInUndoList(), SCH_EDIT_FRAME::SaveCopyInUndoList(), SCH_EDIT_FRAME::SchematicCleanUp(), SCH_SCREEN::SelectBlockItems(), SCH_EDIT_FRAME::SetBusEntryShape(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::SetInitCmp(), Show_Drag_Track_Segment_With_Cte_Slope(), Show_MoveNode(), PCB_EDIT_FRAME::Start_DragTrackSegmentAndKeepSlope(), PCB_EDIT_FRAME::StartMoveOneNodeOrSegment(), DIALOG_LABEL_EDITOR::TextPropertiesAccept(), DIALOG_PCB_TEXT_PROPERTIES::TransferDataFromWindow(), and DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataFromWindow().

284 { return m_Flags; }
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
virtual PCB_LAYER_ID BOARD_ITEM::GetLayer ( ) const
inlinevirtualinherited

Function GetLayer returns the primary layer this item is on.

Reimplemented in ZONE_CONTAINER.

Definition at line 124 of file class_board_item.h.

References BOARD_ITEM::m_Layer.

Referenced by Abort_MoveOrCopyModule(), DIALOG_GLOBAL_DELETION::AcceptPcbDelete(), CINFO3D_VISU::AddGraphicsShapesWithClearanceToContainer(), DIMENSION::AdjustDimensionDetails(), PCB_EDIT_FRAME::Begin_DrawSegment(), GRID_HELPER::BestSnapAnchor(), PCB_EDIT_FRAME::Change_Side_Module(), checkConnectedTo(), MODULE::CopyNetlistSettings(), CreateBoardSection(), MWAVE::CreateMicrowaveInductor(), CreateRoutesSection(), DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), PCB_EDIT_FRAME::DoGenFootprintsPositionFile(), DRC::doTrackKeepoutDrc(), TEXTE_MODULE::Draw(), DRAWSEGMENT::Draw(), KIGFX::PCB_PAINTER::draw(), FOOTPRINT_EDIT_FRAME::Edit_Edge_Layer(), export_vrml_drawsegment(), export_vrml_edge_module(), export_vrml_module(), export_vrml_pcbtext(), export_vrml_text_module(), PCB_EDIT_FRAME::ExportToGenCAD(), TEXTE_PCB::Flip(), PCB_TARGET::Flip(), EDGE_MODULE::Flip(), TEXTE_MODULE::Flip(), TRACK::Flip(), DIMENSION::Flip(), DRAWSEGMENT::Flip(), MODULE::Flip(), FootprintWriteShape(), PCB_IO::formatLayer(), DSN::SPECCTRA_DB::FromBOARD(), genModuleOnRoutingMatrix(), genPlacementRoutingMatrix(), BOARD::GetFootprint(), ZONE_CONTAINER::GetLayer(), getOptimalModulePlacement(), BOARD::GetPad(), BOARD::GetVisibleTrack(), SELECTION_TOOL::guessSelectionCandidates(), idf_export_module(), DIALOG_FOOTPRINT_BOARD_EDITOR::InitBoardProperties(), GENERAL_COLLECTOR::Inspect(), PCB_LAYER_COLLECTOR::Inspect(), D_PAD::IsFlipped(), EDGE_MODULE::IsParentFlipped(), TEXTE_MODULE::IsParentFlipped(), itemIsIncludedByFilter(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), BOARD::MarkTrace(), PCB_EDIT_FRAME::OnRightClick(), PlaceCells(), PCB_EDIT_FRAME::PlaceDraggedOrMovedTrackSegment(), BRDITEMS_PLOTTER::Plot_1_EdgeModule(), BRDITEMS_PLOTTER::Plot_Edges_Modules(), BRDITEMS_PLOTTER::PlotAllTextsModule(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotDrawSegment(), BRDITEMS_PLOTTER::PlotPcbTarget(), BRDITEMS_PLOTTER::PlotTextePcb(), Print_Module(), TRACKS_CLEANER::removeDuplicatesOfTrack(), SELECTION_TOOL::selectable(), ShowClearance(), PCB_EDIT_FRAME::Swap_Layers(), PNS_KICAD_IFACE::syncGraphicalItem(), PNS_KICAD_IFACE::syncTrack(), TEXTE_MODULE::TEXTE_MODULE(), TraceSegmentPcb(), TrackListSortByNetcode(), DIALOG_EDIT_FPTEXT::TransferDataFromWindow(), DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow(), DIALOG_FOOTPRINT_BOARD_EDITOR::TransferDataFromWindow(), DIALOG_EDIT_FPTEXT::TransferDataToWindow(), DIALOG_PCB_TEXT_PROPERTIES::TransferDataToWindow(), DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataToWindow(), DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataToWindow(), CINFO3D_VISU::transformGraphicModuleEdgeToPolygonSet(), MODULE::TransformGraphicShapesWithClearanceToPolygonSet(), MODULE::TransformGraphicTextWithClearanceToPolygonSet(), TstModuleOnBoard(), TEXTE_MODULE::ViewGetLayers(), and TRACK::ViewGetLayers().

124 { return m_Layer; }
PCB_LAYER_ID m_Layer
wxString BOARD_ITEM::GetLayerName ( ) const
inherited

Function GetLayerName returns the name of the PCB layer on which the item resides.

Returns
wxString containing the layer name associated with this item.

Definition at line 78 of file class_board_item.cpp.

References BOARD_ITEM::GetBoard(), BOARD::GetLayerName(), BOARD::GetStandardLayerName(), and BOARD_ITEM::m_Layer.

Referenced by BOARD_ITEM::Flip(), PCB_IO::format(), PCB_IO::formatLayer(), TEXTE_PCB::GetMsgPanelInfo(), ZONE_CONTAINER::GetMsgPanelInfo(), EDGE_MODULE::GetMsgPanelInfo(), TEXTE_MODULE::GetMsgPanelInfo(), DRAWSEGMENT::GetMsgPanelInfo(), EDGE_MODULE::GetSelectMenuText(), TEXTE_PCB::GetSelectMenuText(), TEXTE_MODULE::GetSelectMenuText(), DIMENSION::GetSelectMenuText(), DRAWSEGMENT::GetSelectMenuText(), TRACK::GetSelectMenuText(), SEGZONE::GetSelectMenuText(), ZONE_CONTAINER::GetSelectMenuText(), MODULE::GetSelectMenuText(), and main().

79 {
80  BOARD* board = GetBoard();
81 
82  if( board )
83  return board->GetLayerName( m_Layer );
84 
85  // If no parent, return standard name
87 }
PCB_LAYER_ID m_Layer
const wxString GetLayerName(PCB_LAYER_ID aLayer) const
Function GetLayerName returns the name of a layer given by aLayer.
Class BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:169
virtual BOARD * GetBoard() const
Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.
static wxString GetStandardLayerName(PCB_LAYER_ID aLayerId)
Function GetStandardLayerName returns an "English Standard" name of a PCB layer when given aLayerNumb...
Definition: class_board.h:647
virtual LSET BOARD_ITEM::GetLayerSet ( ) const
inlinevirtualinherited

Function GetLayerSet returns a "layer mask", which is a bitmap of all layers on which the TRACK segment or VIA physically resides.

Returns
int - a layer mask, see layers_id_colors_visibility.h.

Reimplemented in D_PAD, VIA, and ZONE_CONTAINER.

Definition at line 132 of file class_board_item.h.

Referenced by build_pad_testpoints(), BOARD::chainMarkedSegments(), VIA::ClassOf(), Collect_TrackSegmentsToDrag(), DRC::doTrackDrc(), DRC::doTrackKeepoutDrc(), PCB_EDIT_FRAME::EraseRedundantTrack(), find_vias_and_tracks_at(), TRACK::GetEndSegments(), TRACK::GetTrack(), hash_board_item(), CN_ANCHOR::IsDangling(), BOARD::MarkTrace(), PCB_EDIT_FRAME::PrintPage(), CN_CONNECTIVITY_ALGO::searchConnections(), PCB_EDIT_FRAME::StartMoveOneNodeOrSegment(), and DRC::testKeepoutAreas().

132 { return LSET( m_Layer ); }
PCB_LAYER_ID m_Layer
Class LSET is a set of PCB_LAYER_IDs.
DHEAD* EDA_ITEM::GetList ( ) const
inlineinherited
BITMAP_DEF EDA_ITEM::GetMenuImage ( ) const
virtualinherited

Function GetMenuImage returns a pointer to an image to be used in menus.

The default version returns the right arrow image. Override this function to provide object specific menu images.

Returns
The menu image associated with the item.

Reimplemented in D_PAD, SCH_COMPONENT, MODULE, ZONE_CONTAINER, SCH_SHEET, LIB_PIN, VIA, SEGZONE, SCH_HIERLABEL, SCH_GLOBALLABEL, TRACK, DRAWSEGMENT, SCH_LABEL, LIB_FIELD, DIMENSION, TEXTE_MODULE, SCH_SHEET_PIN, SCH_BUS_BUS_ENTRY, SCH_TEXT, SCH_FIELD, SCH_LINE, LIB_ARC, SCH_BUS_WIRE_ENTRY, TEXTE_PCB, LIB_TEXT, SCH_BITMAP, EDGE_MODULE, LIB_POLYLINE, MARKER_PCB, LIB_RECTANGLE, LIB_CIRCLE, PCB_TARGET, SCH_MARKER, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 282 of file base_struct.cpp.

References dummy_xpm, EDA_ITEM::GetClass(), operator<<(), wxPoint::x, and wxPoint::y.

Referenced by SCH_BUS_WIRE_ENTRY::CanConnect(), SCH_BUS_BUS_ENTRY::CanConnect(), SELECTION_TOOL::disambiguationMenu(), EDA_ITEM::HitTest(), FOOTPRINT_EDIT_FRAME::ModeditLocateAndDisplay(), and PCB_BASE_FRAME::PcbGeneralLocateAndDisplay().

283 {
284  return dummy_xpm;
285 }
static const BITMAP_OPAQUE dummy_xpm[1]
Definition: base_struct.cpp:56
int NETINFO_ITEM::GetMicroViaDrillSize ( )
inline

Function GetViaDrillSize returns the size of via drills used to route this net.

Definition at line 182 of file netinfo.h.

Referenced by DRAWING_TOOL::DrawVia(), VIA::GetMsgPanelInfoBase(), and PCB_EDIT_FRAME::Other_Layer_Route().

183  {
184  wxASSERT( m_NetClass );
185  return m_NetClass->GetuViaDrill();
186  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
int NETINFO_ITEM::GetMicroViaSize ( )
inline

Function GetMicroViaSize returns the size of vias used to route this net.

Definition at line 162 of file netinfo.h.

Referenced by DRAWING_TOOL::DrawVia(), and PCB_EDIT_FRAME::Other_Layer_Route().

163  {
164  wxASSERT( m_NetClass );
165  return m_NetClass->GetuViaDiameter();
166  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
void NETINFO_ITEM::GetMsgPanelInfo ( std::vector< MSG_PANEL_ITEM > &  aList)
overridevirtual

Function GetMsgPanelInfo returns the information about the NETINFO_ITEM in aList to display in the message panel.

Parameters
aListis the list in which to place the status information.

Reimplemented from EDA_ITEM.

Definition at line 88 of file netinfo_item.cpp.

References BLUE, DARKGREEN, BOARD_ITEM::GetBoard(), GetNet(), GetNetname(), LengthDoubleToString(), m_parent, BOARD::m_Track, mod, BOARD::Modules(), TRACK::Next(), PCB_TRACE_T, PCB_VIA_T, and RED.

Referenced by highlightNet(), and PCB_EDIT_FRAME::OnLeftClick().

89 {
90  wxString txt;
91  double lengthnet = 0.0; // This is the length of tracks on pcb
92  double lengthPadToDie = 0.0; // this is the length of internal ICs connections
93 
94  aList.push_back( MSG_PANEL_ITEM( _( "Net Name" ), GetNetname(), RED ) );
95 
96  txt.Printf( wxT( "%d" ), GetNet() );
97  aList.push_back( MSG_PANEL_ITEM( _( "Net Code" ), txt, RED ) );
98 
99  // Warning: for netcode == NETINFO_LIST::ORPHANED, the parent or the board
100  // can be NULL
101  BOARD * board = m_parent ? m_parent->GetBoard() : NULL;
102 
103  if( board == NULL )
104  return;
105 
106  int count = 0;
107  for( auto mod : board->Modules() )
108  {
109  for( auto pad : mod->Pads() )
110  {
111  if( pad->GetNetCode() == GetNet() )
112  {
113  count++;
114  lengthPadToDie += pad->GetPadToDieLength();
115  }
116  }
117  }
118 
119  txt.Printf( wxT( "%d" ), count );
120  aList.push_back( MSG_PANEL_ITEM( _( "Pads" ), txt, DARKGREEN ) );
121 
122  count = 0;
123 
124  for( const TRACK *track = board->m_Track; track != NULL; track = track->Next() )
125  {
126  if( track->Type() == PCB_VIA_T )
127  {
128  if( track->GetNetCode() == GetNet() )
129  count++;
130  }
131 
132  if( track->Type() == PCB_TRACE_T )
133  {
134  if( track->GetNetCode() == GetNet() )
135  lengthnet += track->GetLength();
136  }
137  }
138 
139  txt.Printf( wxT( "%d" ), count );
140  aList.push_back( MSG_PANEL_ITEM( _( "Vias" ), txt, BLUE ) );
141 
142  // Displays the full net length (tracks on pcb + internal ICs connections ):
143  txt = ::LengthDoubleToString( lengthnet + lengthPadToDie );
144  aList.push_back( MSG_PANEL_ITEM( _( "Net Length" ), txt, RED ) );
145 
146  // Displays the net length of tracks only:
147  txt = ::LengthDoubleToString( lengthnet );
148  aList.push_back( MSG_PANEL_ITEM( _( "On Board" ), txt, RED ) );
149 
150  // Displays the net length of internal ICs connections (wires inside ICs):
151  txt = ::LengthDoubleToString( lengthPadToDie );
152  aList.push_back( MSG_PANEL_ITEM( _( "In Package" ), txt, RED ) );
153 }
Definition: colors.h:57
BOARD * m_parent
The parent board the net belongs to.
Definition: netinfo.h:83
class TRACK, a track segment (segment on a copper layer)
Definition: typeinfo.h:95
DLIST_ITERATOR_WRAPPER< MODULE > Modules()
Definition: class_board.h:250
wxString LengthDoubleToString(double aValue, bool aConvertToMils)
Function LengthDoubleToString is a helper to convert the double length aValue to a string in inches...
Definition: base_units.cpp:123
Definition: colors.h:60
int GetNet() const
Function GetNet.
Definition: netinfo.h:227
TRACK * Next() const
Definition: class_track.h:99
Class BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:169
virtual BOARD * GetBoard() const
Function GetBoard returns the BOARD in which this BOARD_ITEM resides, or NULL if none.
class VIA, a via (like a track segment on a copper layer)
Definition: typeinfo.h:96
DLIST< TRACK > m_Track
Definition: class_board.h:246
const wxString & GetNetname() const
Function GetNetname.
Definition: netinfo.h:235
Class EDA_MSG_ITEM is used EDA_MSG_PANEL as the item type for displaying messages.
Definition: msgpanel.h:53
#define mod(a, n)
Definition: greymap.cpp:24
NETCLASSPTR NETINFO_ITEM::GetNetClass ( )
inline

Definition at line 122 of file netinfo.h.

Referenced by BOARD_CONNECTED_ITEM::GetNetClass(), PNS::DIFF_PAIR_PLACER::Start(), and DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::updateNetInfo().

123  {
124  return m_NetClass;
125  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
int BOARD_ITEM::getNextNumberInSequence ( const std::set< int > &  aSeq,
bool  aFillSequenceGaps 
)
staticprotectedinherited

Definition at line 230 of file class_board_item.cpp.

Referenced by MODULE::GetNextPadName().

231 {
232  if( aSeq.empty() )
233  return 1;
234 
235  // By default go to the end of the sequence
236  int candidate = *aSeq.rbegin();
237 
238  // Filling in gaps in pad numbering
239  if( aFillSequenceGaps )
240  {
241  // start at the beginning
242  candidate = *aSeq.begin();
243 
244  for( auto it : aSeq )
245  {
246  if( it - candidate > 1 )
247  break;
248 
249  candidate = it;
250  }
251  }
252 
253  ++candidate;
254 
255  return candidate;
256 }
BOARD* NETINFO_ITEM::GetParent ( ) const
inline

Definition at line 261 of file netinfo.h.

Referenced by sortNetsByNodes().

262  {
263  return m_parent;
264  }
BOARD * m_parent
The parent board the net belongs to.
Definition: netinfo.h:83
const wxPoint NETINFO_ITEM::GetPosition ( ) const
inlineoverridevirtual

Implements BOARD_ITEM.

Definition at line 106 of file netinfo.h.

References dummy().

107  {
108  static wxPoint dummy(0, 0);
109  return dummy;
110  }
static LIB_PART * dummy()
Used when a LIB_PART is not found in library to draw a dummy shape This component is a 400 mils squar...
wxString EDA_ITEM::GetSelectMenuText ( ) const
virtualinherited

Function GetSelectMenuText returns the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position.

The default version of this function raises an assertion in the debug mode and returns a string to indicate that it was not overridden to provide the object specific text.

Returns
The menu text string.

Reimplemented in D_PAD, SCH_COMPONENT, MODULE, ZONE_CONTAINER, SCH_SHEET, LIB_PIN, VIA, SEGZONE, SCH_HIERLABEL, DELETED_SCH_ITEM, GERBER_DRAW_ITEM, SCH_GLOBALLABEL, TRACK, DRAWSEGMENT, SCH_LABEL, LIB_FIELD, DIMENSION, TEXTE_MODULE, SCH_SHEET_PIN, SCH_TEXT, SCH_BUS_BUS_ENTRY, SCH_FIELD, SCH_LINE, LIB_ARC, SCH_BUS_WIRE_ENTRY, TEXTE_PCB, LIB_TEXT, SCH_BITMAP, EDGE_MODULE, LIB_POLYLINE, MARKER_PCB, LIB_RECTANGLE, LIB_CIRCLE, PCB_TARGET, SCH_MARKER, SCH_NO_CONNECT, and SCH_JUNCTION.

Definition at line 175 of file base_struct.cpp.

References EDA_ITEM::GetClass().

Referenced by SCH_BUS_WIRE_ENTRY::CanConnect(), SCH_BUS_BUS_ENTRY::CanConnect(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SELECTION_TOOL::disambiguationMenu(), DRC::fillMarker(), SCH_FIND_COLLECTOR::GetText(), EDA_ITEM::HitTest(), FOOTPRINT_EDIT_FRAME::ModeditLocateAndDisplay(), and PCB_BASE_FRAME::PcbGeneralLocateAndDisplay().

176 {
177  wxFAIL_MSG( wxT( "GetSelectMenuText() was not overridden for schematic item type " ) +
178  GetClass() );
179 
180  return wxString( wxT( "Undefined menu text for " ) + GetClass() );
181 }
virtual wxString GetClass() const =0
Function GetClass returns the class name.
const wxString& NETINFO_ITEM::GetShortNetname ( ) const
inline

Function GetShortNetname.

Returns
const wxString &, a reference to the short netname

Definition at line 241 of file netinfo.h.

Referenced by VIA::Draw(), TRACK::DrawShortNetname(), and BOARD_CONNECTED_ITEM::GetShortNetname().

241 { return m_ShortNetname; }
wxString m_ShortNetname
short net name, like vout from /mysheet/mysubsheet/vout
Definition: netinfo.h:79
STATUS_FLAGS EDA_ITEM::GetStatus ( ) const
inlineinherited

Definition at line 279 of file base_struct.h.

References EDA_ITEM::m_Status.

Referenced by PCB_IO::format(), and GERBER_DRAW_ITEM::HitTest().

279 { return m_Status; }
STATUS_FLAGS m_Status
Definition: base_struct.h:190
int NETINFO_ITEM::GetTrackWidth ( )
inline

Function GetTrackWidth returns the width of tracks used to route this net.

Definition at line 142 of file netinfo.h.

Referenced by PCB_EDIT_FRAME::SetTrackSegmentWidth().

143  {
144  wxASSERT( m_NetClass );
145  return m_NetClass->GetTrackWidth();
146  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
int BOARD_ITEM::getTrailingInt ( const wxString &  aStr)
staticprotectedinherited

Definition at line 207 of file class_board_item.cpp.

Referenced by MODULE::GetNextPadName().

208 {
209  int number = 0;
210  int base = 1;
211 
212  // Trim and extract the trailing numeric part
213  int index = aStr.Len() - 1;
214  while( index >= 0 )
215  {
216  const char chr = aStr.GetChar( index );
217 
218  if( chr < '0' || chr > '9' )
219  break;
220 
221  number += ( chr - '0' ) * base;
222  base *= 10;
223  index--;
224  }
225 
226  return number;
227 }
int NETINFO_ITEM::GetViaDrillSize ( )
inline

Function GetViaDrillSize returns the size of via drills used to route this net.

Definition at line 172 of file netinfo.h.

Referenced by VIA::GetMsgPanelInfoBase().

173  {
174  wxASSERT( m_NetClass );
175  return m_NetClass->GetViaDrill();
176  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
int NETINFO_ITEM::GetViaSize ( )
inline

Function GetViaSize returns the size of vias used to route this net.

Definition at line 152 of file netinfo.h.

153  {
154  wxASSERT( m_NetClass );
155  return m_NetClass->GetViaDiameter();
156  }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
virtual bool BOARD_ITEM::HitTest ( const wxPoint aPosition) const
inlineoverridevirtualinherited

Function HitTest tests if aPosition is contained within or on the bounding area of an item.

Parameters
aPositionA reference to a wxPoint object containing the coordinates to test.
Returns
True if aPosition is within or on the item bounding area.

Reimplemented from EDA_ITEM.

Reimplemented in D_PAD, MODULE, VIA, ZONE_CONTAINER, TRACK, DIMENSION, DRAWSEGMENT, TEXTE_MODULE, MARKER_PCB, PCB_TARGET, and TEXTE_PCB.

Definition at line 289 of file class_board_item.h.

References EDA_ITEM::HitTest().

Referenced by GENERAL_COLLECTOR::Inspect(), CN_ANCHOR::IsDangling(), and SELECTION_TOOL::selectMultiple().

290  {
291  return EDA_ITEM::HitTest( aPosition );
292  }
virtual bool HitTest(const wxPoint &aPosition) const
Function HitTest tests if aPosition is contained within or on the bounding area of an item...
Definition: base_struct.h:317
virtual bool BOARD_ITEM::HitTest ( const EDA_RECT aRect,
bool  aContained = true,
int  aAccuracy = 0 
) const
inlinevirtualinherited

Function HitTest tests if the aRect intersects or contains this object (depending on aContained).

Parameters
aRectA reference to an EDA_RECT object containg the area to test.
aContainedTest if aRect contains this object completly.
aAccuracyIncrease the item bounding box by this amount.
Returns
bool - True if aRect contains this object completly or if aRect intersects the object and aContained is False, otherwise false.

Reimplemented in D_PAD, MODULE, VIA, ZONE_CONTAINER, TRACK, DIMENSION, DRAWSEGMENT, TEXTE_MODULE, PCB_TARGET, and TEXTE_PCB.

Definition at line 304 of file class_board_item.h.

References BOARD_ITEM::FormatAngle(), BOARD_ITEM::FormatInternalUnits(), BOARD_ITEM::TransformShapeWithClearanceToPolygon(), and BOARD_ITEM::ViewGetLayers().

305  {
306  return false; // derived classes should override this function
307  }
bool EDA_ITEM::IsBrightened ( ) const
inlineinherited

Definition at line 253 of file base_struct.h.

References BRIGHTENED.

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), KIGFX::GERBVIEW_PAINTER::draw(), and KIGFX::PCB_RENDER_SETTINGS::GetColor().

253 { return m_Flags & BRIGHTENED; }
#define BRIGHTENED
item is drawn with a bright contour
Definition: base_struct.h:151
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
virtual bool BOARD_ITEM::IsConnected ( ) const
inlinevirtualinherited

Function IsConnected() Returns information if the object is derived from BOARD_CONNECTED_ITEM.

Returns
True if the object is of BOARD_CONNECTED_ITEM type, false otherwise.

Reimplemented in BOARD_CONNECTED_ITEM.

Definition at line 106 of file class_board_item.h.

Referenced by CONNECTIVITY_DATA::MarkItemNetAsDirty(), and CN_CONNECTIVITY_ALGO::markItemNetAsDirty().

107  {
108  return false;
109  }
bool EDA_ITEM::IsDragging ( ) const
inlineinherited
bool EDA_ITEM::IsHighlighted ( ) const
inlineinherited

Definition at line 252 of file base_struct.h.

References HIGHLIGHTED.

252 { return m_Flags & HIGHLIGHTED; }
#define HIGHLIGHTED
item is drawn in normal colors, when the rest is darkened
Definition: base_struct.h:150
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
virtual bool BOARD_ITEM::IsLocked ( ) const
inlinevirtualinherited

Function IsLocked.

Returns
bool - true if the object is locked, else false

Reimplemented in MODULE, and TRACK.

Definition at line 194 of file class_board_item.h.

Referenced by DIALOG_GLOBAL_DELETION::AcceptPcbDelete(), GENERAL_COLLECTOR::Inspect(), PCB_EDITOR_CONTROL::modifyLockSelected(), and PCB_EDIT_FRAME::OnHotkeyDeleteItem().

195  {
196  // only MODULEs & TRACKs can be locked at this time.
197  return false;
198  }
bool EDA_ITEM::IsModified ( ) const
inlineinherited

Definition at line 246 of file base_struct.h.

References IS_CHANGED.

Referenced by LIB_EDIT_FRAME::OnEditPin().

246 { return m_Flags & IS_CHANGED; }
#define IS_CHANGED
std::function passed to nested users by ref, avoids copying std::function
Definition: base_struct.h:123
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
bool EDA_ITEM::IsNew ( ) const
inlineinherited

Definition at line 245 of file base_struct.h.

References IS_NEW.

Referenced by Abort_Edit_Pcb_Text(), Abort_EditEdge(), Abort_Move_ModuleOutline(), Abort_MoveOrCopyModule(), Abort_Zone_Create_Outline(), AbortBuildDimension(), AbortMoveAndEditTarget(), abortMoveBitmap(), abortMoveItem(), AbortPinMove(), AbortSymbolTraceOn(), SCH_EDIT_FRAME::addCurrentItemToList(), SCH_EDIT_FRAME::addJunctionMenuEntries(), AddMenusForBus(), AddMenusForWire(), PCB_EDIT_FRAME::Delete_Segment(), PCB_EDIT_FRAME::Delete_Segment_Edge(), SCH_EDIT_FRAME::DeleteCurrentSegment(), LIB_ARC::drawEditGraphics(), LIB_ARC::drawGraphic(), DrawMovePin(), SCH_EDIT_FRAME::EditSheetPin(), LIB_PIN::EnableEditMode(), LIB_EDIT_FRAME::EndDrawGraphicItem(), SCH_EDIT_FRAME::EndSegment(), ExitSheet(), LIB_PART::LIB_PART(), SCH_EDIT_FRAME::OnAutoplaceFields(), SCH_EDIT_FRAME::OnConvertTextType(), LIB_EDIT_FRAME::OnEditPin(), SCH_EDIT_FRAME::OnHotKey(), FOOTPRINT_EDIT_FRAME::OnLeftClick(), LIB_EDIT_FRAME::OnLeftClick(), PCB_EDIT_FRAME::OnLeftClick(), FOOTPRINT_EDIT_FRAME::OnLeftDClick(), SCH_EDIT_FRAME::OnLeftDClick(), LIB_EDIT_FRAME::OnLeftDClick(), PCB_EDIT_FRAME::OnLeftDClick(), LIB_EDIT_FRAME::OnRightClick(), SCH_EDIT_FRAME::OnRightClick(), SCH_EDIT_FRAME::OnRotate(), PCB_EDIT_FRAME::Place_Texte_Pcb(), PCB_BASE_FRAME::PlaceModule(), LIB_EDIT_FRAME::PlacePin(), PCB_EDIT_FRAME::PlaceTarget(), SCH_EDIT_FRAME::PrepareMoveItem(), SCH_EDIT_FRAME::ReSizeSheet(), ShowClearance(), PCB_EDIT_FRAME::StartMoveTextePcb(), PCB_EDIT_FRAME::SwitchLayer(), and DIALOG_LABEL_EDITOR::TextPropertiesAccept().

245 { return m_Flags & IS_NEW; }
#define IS_NEW
New item, just created.
Definition: base_struct.h:127
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
virtual bool BOARD_ITEM::IsOnLayer ( PCB_LAYER_ID  aLayer) const
inlinevirtualinherited

Function IsOnLayer tests to see if this object is on the given layer.

Is virtual so objects like D_PAD, which reside on multiple layers can do their own form of testing.

Parameters
aLayerThe layer to test for.
Returns
bool - true if on given layer, else false.

Reimplemented in D_PAD, VIA, ZONE_CONTAINER, and MARKER_PCB.

Definition at line 174 of file class_board_item.h.

Referenced by VIA::ClassOf(), CINFO3D_VISU::createLayers(), TEXTE_PCB::Draw(), EDGE_MODULE::Draw(), TEXTE_MODULE::Draw(), DRAWSEGMENT::Draw(), GENERAL_COLLECTOR::Inspect(), ZONE_CONTAINER::IsOnLayer(), SELECTION_TOOL::selectable(), and TraceSegmentPcb().

175  {
176  return m_Layer == aLayer;
177  }
PCB_LAYER_ID m_Layer
virtual bool EDA_ITEM::IsReplaceable ( ) const
inlinevirtualinherited

Function IsReplaceable.

Override this method in any derived object that supports test find and replace.

Returns
True if the item has replaceable text that can be modified using the find and replace dialog.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_LABEL, SCH_FIELD, SCH_SHEET_PIN, and SCH_TEXT.

Definition at line 473 of file base_struct.h.

References EDA_ITEM::operator<().

Referenced by EDA_ITEM::Matches(), and EDA_ITEM::Replace().

473 { return false; }
bool EDA_ITEM::IsResized ( ) const
inlineinherited

Definition at line 251 of file base_struct.h.

References IS_RESIZED.

Referenced by ExitSheet().

251 { return m_Flags & IS_RESIZED; }
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
#define IS_RESIZED
Item being resized.
Definition: base_struct.h:128
bool EDA_ITEM::IsSelected ( ) const
inlineinherited

Definition at line 250 of file base_struct.h.

References SELECTED.

Referenced by SCH_SCREEN::addConnectedItemsToBlock(), AddMenusForPin(), KIGFX::PCB_PAINTER::draw(), LIB_CIRCLE::drawGraphic(), LIB_POLYLINE::drawGraphic(), LIB_RECTANGLE::drawGraphic(), LIB_BEZIER::drawGraphic(), LIB_TEXT::drawGraphic(), LIB_ARC::drawGraphic(), LIB_FIELD::drawGraphic(), DrawMovingBlockOutlines(), LIB_PIN::DrawPinElectricalTypeName(), LIB_PIN::DrawPinSymbol(), LIB_PIN::DrawPinTexts(), KIGFX::GERBVIEW_RENDER_SETTINGS::GetColor(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), LIB_EDIT_FRAME::GlobalSetPins(), SCH_JUNCTION::IsSelectStateChanged(), SCH_NO_CONNECT::IsSelectStateChanged(), SCH_MARKER::IsSelectStateChanged(), SCH_BUS_ENTRY_BASE::IsSelectStateChanged(), SCH_BITMAP::IsSelectStateChanged(), SCH_LINE::IsSelectStateChanged(), SCH_TEXT::IsSelectStateChanged(), SCH_SHEET::IsSelectStateChanged(), SCH_COMPONENT::IsSelectStateChanged(), MirrorMarkedItems(), MoveMarkedItems(), MoveMarkedItemsExactly(), LIB_TEXT::Plot(), RotateMarkedItems(), SELECTION_TOOL::SanitizeSelection(), GERBVIEW_SELECTION_TOOL::select(), SELECTION_TOOL::select(), SCH_SCREEN::SelectBlockItems(), GERBVIEW_SELECTION_TOOL::toggleSelection(), SELECTION_TOOL::toggleSelection(), GERBVIEW_SELECTION_TOOL::unselect(), and SELECTION_TOOL::unselect().

250 { return m_Flags & SELECTED; }
#define SELECTED
Definition: base_struct.h:134
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
bool BOARD_ITEM::IsTrack ( ) const
inlineinherited

Function IsTrack tests to see if this object is a track or via (or microvia).

form of testing.

Returns
bool - true if a track or via, else false.

Definition at line 185 of file class_board_item.h.

References PCB_TRACE_T, PCB_VIA_T, and EDA_ITEM::Type().

Referenced by PCB_EDIT_FRAME::OnHotKey(), and PCB_EDIT_FRAME::OnHotkeyDeleteItem().

186  {
187  return ( Type() == PCB_TRACE_T ) || ( Type() == PCB_VIA_T );
188  }
KICAD_T Type() const
Function Type()
Definition: base_struct.h:227
class TRACK, a track segment (segment on a copper layer)
Definition: typeinfo.h:95
class VIA, a via (like a track segment on a copper layer)
Definition: typeinfo.h:96
bool EDA_ITEM::IsWireImage ( ) const
inlineinherited

Definition at line 249 of file base_struct.h.

References IS_WIRE_IMAGE.

Referenced by abortMoveItem(), and SCH_FIELD::Draw().

249 { return m_Flags & IS_WIRE_IMAGE; }
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:131
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
SEARCH_RESULT EDA_ITEM::IterateForward ( EDA_ITEM listStart,
INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
staticinherited

Function IterateForward walks through the object tree calling the inspector() on each object type requested in scanTypes.

Parameters
listStartThe first in a list of EDA_ITEMs to iterate over.
inspectorIs an INSPECTOR to call on each object that is one of the requested scanTypes.
testDataIs an aid to testFunc, and should be sufficient to allow it to fully determine if an item meets the match criteria, but it may also be used to collect output.
scanTypesA KICAD_T array that is EOT terminated, and provides both the order and interest level of of the types of objects to be iterated over.
Returns
SEARCH_RESULT SEARCH_QUIT if the called INSPECTOR returned SEARCH_QUIT, else SCAN_CONTINUE;

Definition at line 132 of file base_struct.cpp.

References EDA_ITEM::Pnext, SEARCH_CONTINUE, SEARCH_QUIT, and EDA_ITEM::Visit().

Referenced by SCH_COLLECTOR::Collect(), SCH_FIND_COLLECTOR::Collect(), SCH_TYPE_COLLECTOR::Collect(), EDA_ITEM::HitTest(), GERBER_FILE_IMAGE::Visit(), MODULE::Visit(), and BOARD::Visit().

136 {
137  EDA_ITEM* p = listStart;
138 
139  for( ; p; p = p->Pnext )
140  {
141  if( SEARCH_QUIT == p->Visit( inspector, testData, scanTypes ) )
142  return SEARCH_QUIT;
143  }
144 
145  return SEARCH_CONTINUE;
146 }
virtual SEARCH_RESULT Visit(INSPECTOR inspector, void *testData, const KICAD_T scanTypes[])
Function Visit may be re-implemented for each derived class in order to handle all the types given by...
Class EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boa...
Definition: base_struct.h:180
EDA_ITEM * Pnext
next in linked list
Definition: base_struct.h:193
virtual bool EDA_ITEM::Matches ( wxFindReplaceData &  aSearchData,
void *  aAuxData,
wxPoint aFindLocation 
)
inlinevirtualinherited

Function Matches compares the item against the search criteria in aSearchData.

The base class returns false since many of the objects derived from EDA_ITEM do not have any text to search.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search criteria.
aAuxDataA pointer to optional data required for the search or NULL if not used.
aFindLocationA pointer to a wxPoint object to store the location of matched item. The pointer can be NULL if it is not used.
Returns
True if the item's text matches the search criteria in aSearchData.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_SHEET_PIN, SCH_FIELD, SCH_TEXT, LIB_PIN, and SCH_MARKER.

Definition at line 429 of file base_struct.h.

References EDA_ITEM::Replace().

Referenced by SCH_FIND_COLLECTOR::Inspect(), SCH_MARKER::Matches(), LIB_PIN::Matches(), SCH_TEXT::Matches(), SCH_FIELD::Matches(), SCH_SHEET_PIN::Matches(), SCH_SHEET::Matches(), and EDA_ITEM::Sort().

430  {
431  return false;
432  }
bool EDA_ITEM::Matches ( const wxString &  aText,
wxFindReplaceData &  aSearchData 
)
protectedinherited

Function Matches compares aText against search criteria in aSearchData.

This is a helper function for simplify derived class logic.

Parameters
aTextA reference to a wxString object containing the string to test.
aSearchDataThe criteria to search against.
Returns
True if aText matches the search criteria in aSearchData.

Definition at line 184 of file base_struct.cpp.

References FR_MATCH_WILDCARD, FR_SEARCH_REPLACE, and EDA_ITEM::IsReplaceable().

185 {
186  wxString text = aText;
187  wxString searchText = aSearchData.GetFindString();
188 
189  // Don't match if searching for replaceable item and the item doesn't support text replace.
190  if( (aSearchData.GetFlags() & FR_SEARCH_REPLACE) && !IsReplaceable() )
191  return false;
192 
193  if( aSearchData.GetFlags() & wxFR_WHOLEWORD )
194  return aText.IsSameAs( searchText, aSearchData.GetFlags() & wxFR_MATCHCASE );
195 
196  if( aSearchData.GetFlags() & FR_MATCH_WILDCARD )
197  {
198  if( aSearchData.GetFlags() & wxFR_MATCHCASE )
199  return text.Matches( searchText );
200 
201  return text.MakeUpper().Matches( searchText.MakeUpper() );
202  }
203 
204  if( aSearchData.GetFlags() & wxFR_MATCHCASE )
205  return aText.Find( searchText ) != wxNOT_FOUND;
206 
207  return text.MakeUpper().Find( searchText.MakeUpper() ) != wxNOT_FOUND;
208 }
virtual bool IsReplaceable() const
Function IsReplaceable.
Definition: base_struct.h:473
Perform search using simple wild card matching (* & ?).
Perform a search for a item that has replaceable text.
virtual void BOARD_ITEM::Move ( const wxPoint aMoveVector)
inlinevirtualinherited

Function Move move this object.

Parameters
aMoveVector- the move vector for this object.

Reimplemented in D_PAD, ZONE_CONTAINER, BOARD, MODULE, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, TRACK, MARKER_PCB, PCB_TARGET, TEXTE_PCB, and EDGE_MODULE.

Definition at line 234 of file class_board_item.h.

References EDA_ITEM::GetClass().

Referenced by PCB_EDIT_FRAME::Block_Duplicate(), PCB_EDIT_FRAME::Block_Move(), BOARD_ITEM::Move(), BOARD::Move(), FOOTPRINT_EDIT_FRAME::moveExact(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), and DIALOG_CREATE_ARRAY::ARRAY_GRID_OPTIONS::TransformItem().

235  {
236  wxMessageBox( wxT( "virtual BOARD_ITEM::Move used, should not occur" ), GetClass() );
237  }
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void BOARD_ITEM::Move ( const VECTOR2I aMoveVector)
inlineinherited

Definition at line 239 of file class_board_item.h.

References BOARD_ITEM::Move(), VECTOR2< T >::x, and VECTOR2< T >::y.

240  {
241  Move( wxPoint( aMoveVector.x, aMoveVector.y ) );
242  }
virtual void Move(const wxPoint &aMoveVector)
Function Move move this object.
BOARD_ITEM* BOARD_ITEM::Next ( ) const
inlineinherited

Definition at line 116 of file class_board_item.h.

References EDA_ITEM::Pnext.

Referenced by DIALOG_GLOBAL_DELETION::AcceptPcbDelete(), CINFO3D_VISU::AddGraphicsShapesWithClearanceToContainer(), PCB_EDIT_FRAME::AppendBoardFile(), PCB_EDIT_FRAME::ArchiveModulesOnBoard(), FOOTPRINT_EDIT_FRAME::Begin_Edge_Module(), MODULE::BuildPolyCourtyard(), BOARD::ComputeBoundingBox(), BOARD::ConvertBrdLayerToPolygonalContours(), CopyMarkedItems(), DeleteMarkedItems(), PYTHON_ACTION_PLUGINS::deregister_action(), PCB_EDIT_FRAME::DoGenFootprintsReport(), MODULE::Draw(), BOARD::Draw(), MODULE::DrawEdgesOnly(), DrawMovingBlockOutlines(), FOOTPRINT_EDIT_FRAME::Edit_Edge_Layer(), FOOTPRINT_EDIT_FRAME::Edit_Edge_Width(), export_vrml_module(), MODULE::Flip(), PCB_IO::format(), PCB_BASE_FRAME::GetFootprintFromBoardByReference(), MODULE::GetFootprintRect(), hash_eda(), hashModule(), MODULE::HitTest(), PCB_EDIT_FRAME::ImportSpecctraSession(), MirrorMarkedItems(), MODULE::MODULE(), MODULE::MoveAnchorPosition(), MODULE::operator=(), PlaceCells(), BRDITEMS_PLOTTER::Plot_Edges_Modules(), BRDITEMS_PLOTTER::PlotAllTextsModule(), PlotSolderMaskLayer(), PlotStandardLayer(), Print_Module(), FOOTPRINT_EDIT_FRAME::PrintPage(), FOOTPRINT_EDIT_FRAME::RedrawActiveWindow(), PCB_BASE_FRAME::ResetModuleTextSizes(), RotateMarkedItems(), MODULE::RunOnChildren(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), MODULE::SetOrientation(), MODULE::SetPosition(), PCB_EDIT_FRAME::Swap_Layers(), SwapItemData(), TestForExistingItem(), CINFO3D_VISU::transformGraphicModuleEdgeToPolygonSet(), and MODULE::ViewGetLayers().

116 { return static_cast<BOARD_ITEM*>( Pnext ); }
Class BOARD_ITEM is a base class for any item which can be embedded within the BOARD container class...
EDA_ITEM * Pnext
next in linked list
Definition: base_struct.h:193
bool EDA_ITEM::operator< ( const EDA_ITEM aItem) const
inherited

Test if another item is less than this object.

Parameters
aItem- Item to compare against.
Returns
- True if aItem is less than the item.

Definition at line 241 of file base_struct.cpp.

References Format(), GetChars(), and EDA_ITEM::GetClass().

Referenced by EDA_ITEM::IsReplaceable(), and LIB_ALIAS::operator==().

242 {
243  wxFAIL_MSG( wxString::Format( wxT( "Less than operator not defined for item type %s." ),
244  GetChars( GetClass() ) ) );
245 
246  return false;
247 }
static const wxChar * GetChars(const wxString &s)
Function GetChars returns a wxChar* to the actual wxChar* data within a wxString, and is helpful for ...
Definition: macros.h:92
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void Format(OUTPUTFORMATTER *out, int aNestLevel, int aCtl, CPTREE &aTree)
Function Format outputs a PTREE into s-expression format via an OUTPUTFORMATTER derivative.
Definition: ptree.cpp:205
bool EDA_ITEM::Replace ( wxFindReplaceData &  aSearchData,
wxString &  aText 
)
inherited

Helper function used in search and replace dialog Function Replace performs a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search and replace criteria.
aTextA reference to a wxString object containing the text to be replaced.
Returns
True if aText was modified, otherwise false.

Definition at line 211 of file base_struct.cpp.

References GetChars(), EDA_ITEM::GetClass(), EDA_ITEM::IsReplaceable(), and traceFindReplace.

Referenced by EDA_ITEM::Matches(), SCH_TEXT::Replace(), SCH_FIELD::Replace(), SCH_SHEET_PIN::Replace(), SCH_SHEET::Replace(), and SCH_FIND_COLLECTOR::ReplaceItem().

212 {
213  wxCHECK_MSG( IsReplaceable(), false,
214  wxT( "Attempt to replace text in <" ) + GetClass() + wxT( "> item." ) );
215 
216  wxString searchString = (aSearchData.GetFlags() & wxFR_MATCHCASE) ? aText : aText.Upper();
217 
218  int result = searchString.Find( (aSearchData.GetFlags() & wxFR_MATCHCASE) ?
219  aSearchData.GetFindString() :
220  aSearchData.GetFindString().Upper() );
221 
222  if( result == wxNOT_FOUND )
223  return false;
224 
225  wxString prefix = aText.Left( result );
226  wxString suffix;
227 
228  if( aSearchData.GetFindString().length() + result < aText.length() )
229  suffix = aText.Right( aText.length() - ( aSearchData.GetFindString().length() + result ) );
230 
231  wxLogTrace( traceFindReplace, wxT( "Replacing '%s', prefix '%s', replace '%s', suffix '%s'." ),
232  GetChars( aText ), GetChars( prefix ), GetChars( aSearchData.GetReplaceString() ),
233  GetChars( suffix ) );
234 
235  aText = prefix + aSearchData.GetReplaceString() + suffix;
236 
237  return true;
238 }
virtual bool IsReplaceable() const
Function IsReplaceable.
Definition: base_struct.h:473
const wxString traceFindReplace
Flag to enable find and replace debug tracing.
Definition: base_struct.cpp:58
static const wxChar * GetChars(const wxString &s)
Function GetChars returns a wxChar* to the actual wxChar* data within a wxString, and is helpful for ...
Definition: macros.h:92
virtual wxString GetClass() const =0
Function GetClass returns the class name.
virtual bool EDA_ITEM::Replace ( wxFindReplaceData &  aSearchData,
void *  aAuxData = NULL 
)
inlinevirtualinherited

Function Replace performs a text replace using the find and replace criteria in aSearchData on items that support text find and replace.

This function must be overridden for items that support text replace.

Parameters
aSearchDataA reference to a wxFindReplaceData object containing the search and replace criteria.
aAuxDataA pointer to optional data required for the search or NULL if not used.
Returns
True if the item text was modified, otherwise false.

Reimplemented in SCH_SHEET, SCH_SHEET_PIN, SCH_FIELD, and SCH_TEXT.

Definition at line 461 of file base_struct.h.

461 { return false; }
virtual void BOARD_ITEM::Rotate ( const wxPoint aRotCentre,
double  aAngle 
)
inlinevirtualinherited

Function Rotate Rotate this object.

Parameters
aRotCentre- the rotation point.
aAngle- the rotation angle in 0.1 degree.

Reimplemented in D_PAD, ZONE_CONTAINER, MODULE, DRAWSEGMENT, DIMENSION, TRACK, TEXTE_MODULE, EDGE_MODULE, MARKER_PCB, PCB_TARGET, and TEXTE_PCB.

Definition at line 250 of file class_board_item.h.

References EDA_ITEM::GetClass().

Referenced by PCB_EDIT_FRAME::Block_Rotate(), FOOTPRINT_EDIT_FRAME::moveExact(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), BOARD_ITEM::Rotate(), and DIALOG_CREATE_ARRAY::ARRAY_CIRCULAR_OPTIONS::TransformItem().

251  {
252  wxMessageBox( wxT( "virtual BOARD_ITEM::Rotate used, should not occur" ), GetClass() );
253  }
virtual wxString GetClass() const =0
Function GetClass returns the class name.
void BOARD_ITEM::Rotate ( const VECTOR2I aRotCentre,
double  aAngle 
)
inlineinherited

Definition at line 255 of file class_board_item.h.

References BOARD_ITEM::Rotate(), VECTOR2< T >::x, and VECTOR2< T >::y.

256  {
257  Rotate( wxPoint( aRotCentre.x, aRotCentre.y ), aAngle );
258  }
virtual void Rotate(const wxPoint &aRotCentre, double aAngle)
Function Rotate Rotate this object.
void EDA_ITEM::SetBack ( EDA_ITEM aBack)
inlineinherited

Definition at line 241 of file base_struct.h.

Referenced by DHEAD::append(), DHEAD::insert(), SCH_EDIT_FRAME::PutDataInPreviousState(), DHEAD::remove(), and SwapItemData().

241 { Pback = aBack; }
EDA_ITEM * Pback
previous in linked list
Definition: base_struct.h:194
void EDA_ITEM::SetBrightened ( )
inlineinherited

Definition at line 258 of file base_struct.h.

References BRIGHTENED, and EDA_ITEM::SetFlags().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), and SELECTION_TOOL::disambiguationMenu().

258 { SetFlags( BRIGHTENED ); }
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:282
#define BRIGHTENED
item is drawn with a bright contour
Definition: base_struct.h:151
void NETINFO_ITEM::SetClass ( const NETCLASSPTR &  aNetClass)

Function SetClass sets aNetclass into this NET.

Definition at line 81 of file netinfo_item.cpp.

References NETCLASSES::GetDefault(), BOARD::GetDesignSettings(), m_NetClass, BOARD_DESIGN_SETTINGS::m_NetClasses, and m_parent.

Referenced by BOARD::SynchronizeNetsAndNetClasses().

82 {
83  wxCHECK( m_parent, /* void */ );
84  m_NetClass = aNetClass ? aNetClass : m_parent->GetDesignSettings().m_NetClasses.GetDefault();
85 }
NETCLASSPTR m_NetClass
Definition: netinfo.h:81
BOARD * m_parent
The parent board the net belongs to.
Definition: netinfo.h:83
BOARD_DESIGN_SETTINGS & GetDesignSettings() const
Function GetDesignSettings.
Definition: class_board.h:532
NETCLASSPTR GetDefault() const
Function GetDefault.
Definition: netclass.h:275
NETCLASSES m_NetClasses
List of current netclasses. There is always the default netclass.
void EDA_ITEM::SetFlags ( STATUS_FLAGS  aMask)
inlineinherited

Definition at line 282 of file base_struct.h.

Referenced by SCH_EAGLE_PLUGIN::addBusEntries(), SCH_SCREEN::addConnectedItemsToBlock(), AddSegmentToDragList(), PCBNEW_CONTROL::AppendBoard(), PCB_EDIT_FRAME::AppendBoardFile(), PCB_EDIT_FRAME::Begin_DrawSegment(), FOOTPRINT_EDIT_FRAME::Begin_Edge_Module(), PCB_EDIT_FRAME::Begin_Route(), PCB_EDIT_FRAME::Begin_Zone(), PCB_EDIT_FRAME::BeginMoveDimensionText(), PCB_EDIT_FRAME::BeginMoveTarget(), SCH_EDIT_FRAME::BeginSegment(), PCB_EDIT_FRAME::Change_Side_Module(), SCH_EDIT_FRAME::ConvertPart(), SCH_EDIT_FRAME::copyBlockItems(), CopyMarkedItems(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::copyPanelToOptions(), LIB_PART::CopySelectedItems(), LIB_EDIT_FRAME::copySelectedItems(), SCH_EDIT_FRAME::CreateBusBusEntry(), SCH_EDIT_FRAME::CreateBusWireEntry(), SCH_EDIT_FRAME::CreateNewImage(), SCH_EDIT_FRAME::CreateNewText(), LIB_EDIT_FRAME::CreatePin(), SCH_EDIT_FRAME::CreateSheet(), SCH_EDIT_FRAME::CreateSheetPin(), PCB_EDIT_FRAME::CreateTarget(), PCB_EDIT_FRAME::CreateTextePcb(), FOOTPRINT_EDIT_FRAME::CreateTextModule(), SCH_EDIT_FRAME::DeleteItem(), PCB_EDIT_FRAME::EditDimension(), PCB_EDIT_FRAME::FlipTextePcb(), LIB_EDIT_FRAME::GetComponentFromRedoList(), LIB_EDIT_FRAME::GetComponentFromUndoList(), SCH_SCREEN::GetConnection(), PCB_BASE_FRAME::GlobalChange_PadSettings(), FOOTPRINT_EDIT_FRAME::HandleBlockEnd(), PCB_BASE_FRAME::Import_Pad_Settings(), SCH_EDIT_FRAME::ImportSheetPin(), SCH_JUNCTION::IsSelectStateChanged(), SCH_NO_CONNECT::IsSelectStateChanged(), SCH_MARKER::IsSelectStateChanged(), SCH_BUS_ENTRY_BASE::IsSelectStateChanged(), SCH_BITMAP::IsSelectStateChanged(), SCH_LINE::IsSelectStateChanged(), SCH_TEXT::IsSelectStateChanged(), SCH_SHEET::IsSelectStateChanged(), SCH_COMPONENT::IsSelectStateChanged(), SCH_EDIT_FRAME::Load_Component(), PCB_BASE_FRAME::LoadModuleFromLibrary(), SCH_SCREEN::MarkConnections(), MarkItemsInBloc(), moveBitmap(), SCH_EDIT_FRAME::MoveImage(), SCH_EDIT_FRAME::OnConvertTextType(), SCH_EDIT_FRAME::OnCopySchematicItemRequest(), LIB_EDIT_FRAME::OnEditPin(), TARGET_PROPERTIES_DIALOG_EDITOR::OnOkClick(), SCH_EDIT_FRAME::OnSelectUnit(), KIGFX::ORIGIN_VIEWITEM::ORIGIN_VIEWITEM(), PCB_EDIT_FRAME::Other_Layer_Route(), DRAWING_TOOL::PlaceText(), SCH_EDIT_FRAME::PrepareMoveItem(), LIB_EDIT_FRAME::Process_Special_Functions(), EDIT_TOOL::Properties(), SCH_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_FRAME::RepeatDrawItem(), LIB_EDIT_FRAME::RepeatPinItem(), SCH_EDIT_FRAME::ReSizeSheet(), PCB_BASE_FRAME::Rotate_Module(), PCB_EDIT_FRAME::Rotate_Texte_Pcb(), LIB_EDIT_FRAME::SaveCopyInUndoList(), SCH_SCREEN::SelectBlockItems(), EDA_ITEM::SetBrightened(), LIB_PIN::SetConversion(), BLOCK_SELECTOR::SetFlags(), EDA_ITEM::SetHighlighted(), EDA_ITEM::SetModified(), EDA_ITEM::SetSelected(), EDA_ITEM::SetWireImage(), PCB_EDIT_FRAME::Start_DragTrackSegmentAndKeepSlope(), PCB_EDIT_FRAME::Start_Move_DrawItem(), FOOTPRINT_EDIT_FRAME::Start_Move_EdgeMod(), PCB_EDIT_FRAME::Start_Move_Zone_Corner(), PCB_EDIT_FRAME::Start_Move_Zone_Drag_Outline_Edge(), PCB_EDIT_FRAME::Start_Move_Zone_Outlines(), PCB_EDIT_FRAME::StartMoveModule(), PCB_EDIT_FRAME::StartMoveOneNodeOrSegment(), PCB_BASE_FRAME::StartMovePad(), LIB_EDIT_FRAME::StartMovePin(), PCB_BASE_FRAME::StartMoveTexteModule(), PCB_EDIT_FRAME::StartMoveTextePcb(), DIALOG_PCB_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), and UndrawAndMarkSegmentsToDrag().

282 { m_Flags |= aMask; }
STATUS_FLAGS m_Flags
Flag bits for editing and other uses.
Definition: base_struct.h:204
void EDA_ITEM::SetForceVisible ( bool  aEnable)
inlineinherited

Function SetForceVisible is used to set and cleag force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible.

Parameters
aEnableTrue forces the item to be drawn. False uses the item's visibility setting to determine if the item is to be drawn.

Definition at line 294 of file base_struct.h.

Referenced by SCH_EDIT_FRAME::OnFindSchematicItem(), and SCH_EDIT_FRAME::updateFindReplaceView().

294 { m_forceVisible = aEnable; }
bool m_forceVisible
Set to true to override the visibility setting of the item.
Definition: base_struct.h:201
void EDA_ITEM::SetHighlighted ( )
inlineinherited

Definition at line 257 of file base_struct.h.

References HIGHLIGHTED, and EDA_ITEM::SetFlags().

257 { SetFlags( HIGHLIGHTED ); }
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:282
#define HIGHLIGHTED
item is drawn in normal colors, when the rest is darkened
Definition: base_struct.h:150
virtual void BOARD_ITEM::SetLayer ( PCB_LAYER_ID  aLayer)
inlinevirtualinherited

Function SetLayer sets the layer this item is on.

Parameters
aLayerThe layer number. is virtual because some items (in fact: class DIMENSION) have a slightly different initialization

Reimplemented in ZONE_CONTAINER, and DIMENSION.

Definition at line 141 of file class_board_item.h.

References BOARD_ITEM::Draw(), and BOARD_ITEM::SwapData().

Referenced by DXF2BRD_CONVERTER::addArc(), DXF2BRD_CONVERTER::addCircle(), PNS_KICAD_IFACE::AddItem(), DXF2BRD_CONVERTER::addLine(), DXF2BRD_CONVERTER::addMText(), DXF2BRD_CONVERTER::addText(), PCAD2KICAD::PCB_TEXT::AddToBoard(), PCAD2KICAD::PCB_LINE::AddToBoard(), PCAD2KICAD::PCB_ARC::AddToBoard(), PCAD2KICAD::PCB_PAD::AddToBoard(), PCAD2KICAD::PCB_MODULE::AddToBoard(), PCAD2KICAD::PCB_LINE::AddToModule(), PCAD2KICAD::PCB_ARC::AddToModule(), PCAD2KICAD::PCB_POLYGON::AddToModule(), DIMENSION::AdjustDimensionDetails(), DIALOG_TRACK_VIA_PROPERTIES::Apply(), PCB_EDIT_FRAME::Begin_DrawSegment(), FOOTPRINT_EDIT_FRAME::Begin_Edge_Module(), PCB_EDIT_FRAME::Begin_Route(), PCB_EDIT_FRAME::Create_MuWavePolygonShape(), MWAVE::CreateMicrowaveInductor(), PCB_BASE_FRAME::CreateNewModule(), PCB_EDIT_FRAME::CreateTarget(), PCB_EDIT_FRAME::CreateTextePcb(), FOOTPRINT_EDIT_FRAME::CreateTextModule(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::drawSegment(), FOOTPRINT_EDIT_FRAME::Edit_Edge_Layer(), TEXTE_PCB::Flip(), PCB_TARGET::Flip(), EDGE_MODULE::Flip(), TEXTE_MODULE::Flip(), TRACK::Flip(), DRAWSEGMENT::Flip(), MODULE::Flip(), genPlacementRoutingMatrix(), DXF2BRD_CONVERTER::insertArc(), DXF2BRD_CONVERTER::insertLine(), LEGACY_PLUGIN::loadMODULE(), LEGACY_PLUGIN::loadMODULE_TEXT(), LEGACY_PLUGIN::loadPCB_TEXT(), EAGLE_PLUGIN::loadPlain(), EAGLE_PLUGIN::loadSignals(), LEGACY_PLUGIN::loadTrackList(), DSN::SPECCTRA_DB::makeTRACK(), PCB_EDIT_FRAME::Other_Layer_Route(), EAGLE_PLUGIN::packageCircle(), EAGLE_PLUGIN::packagePolygon(), EAGLE_PLUGIN::packageRectangle(), EAGLE_PLUGIN::packageSMD(), EAGLE_PLUGIN::packageText(), EAGLE_PLUGIN::packageWire(), GPCB_FPL_CACHE::parseMODULE(), PlaceCells(), DRAWING_TOOL::PlaceDXF(), DRAWING_TOOL::PlaceText(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotPcbTarget(), DIALOG_PAD_PROPERTIES::redraw(), DIMENSION::SetLayer(), ShowNewTrackWhenMovingCursor(), PCB_EDIT_FRAME::Swap_Layers(), TEXTE_MODULE::TEXTE_MODULE(), DIALOG_EDIT_FPTEXT::TransferDataFromWindow(), DIALOG_PCB_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataFromWindow(), and DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow().

142  {
143  // trap any invalid layers, then go find the caller and fix it.
144  // wxASSERT( unsigned( aLayer ) < unsigned( NB_PCB_LAYERS ) );
145  m_Layer = aLayer;
146  }
PCB_LAYER_ID m_Layer
void EDA_ITEM::SetList ( DHEAD aList)
inlineinherited

Definition at line 243 of file base_struct.h.

Referenced by DHEAD::append(), DHEAD::insert(), DHEAD::remove(), and SwapItemData().

243 { m_List = aList; }
DHEAD * m_List
which DLIST I am on.
Definition: base_struct.h:195
virtual void BOARD_ITEM::SetLocked ( bool  aLocked)
inlinevirtualinherited

Function SetLocked modifies 'lock' status for of the item.

Reimplemented in MODULE, and TRACK.

Definition at line 204 of file class_board_item.h.

References BOARD_ITEM::DeleteStructure(), BOARD_ITEM::ShowShape(), and BOARD_ITEM::UnLink().

205  {
206  // only MODULEs & TRACKs can be locked at this time.
207  }
void EDA_ITEM::SetModified ( )
inherited
void NETINFO_ITEM::SetNetCode ( int  aNetCode)
inline

Definition at line 229 of file netinfo.h.

Referenced by PCB_PARSER::parseZONE_CONTAINER().

229 { m_NetCode = aNetCode; }
int m_NetCode
A number equivalent to the net name.
Definition: netinfo.h:74
void EDA_ITEM::SetNext ( EDA_ITEM aNext)
inlineinherited

Definition at line 240 of file base_struct.h.

Referenced by DHEAD::append(), DHEAD::insert(), SCH_EDIT_FRAME::PutDataInPreviousState(), DHEAD::remove(), and SwapItemData().

240 { Pnext = aNext; }
EDA_ITEM * Pnext
next in linked list
Definition: base_struct.h:193
void EDA_ITEM::SetParent ( EDA_ITEM aParent)
inlineinherited

Definition at line 242 of file base_struct.h.

Referenced by MODULE::Add(), BOARD::Add(), BOARD_NETLIST_UPDATER::addNewComponent(), LIB_FIELD::Copy(), SCH_EDIT_FRAME::copyBlockItems(), CopyMarkedItems(), SCH_EDIT_FRAME::CreateSheet(), DIALOG_LIB_EDIT_PIN::DIALOG_LIB_EDIT_PIN(), PCB_EDIT_FRAME::Exchange_Module(), DISPLAY_FOOTPRINTS_FRAME::Get_Module(), DIALOG_FOOTPRINT_FP_EDITOR::initModeditProperties(), DIALOG_FOOTPRINT_BOARD_EDITOR::InitModeditProperties(), LIB_PART::LIB_PART(), FOOTPRINT_EDIT_FRAME::Load_Module_From_BOARD(), SCH_LEGACY_PLUGIN::loadHierarchy(), LIB_EDIT_FRAME::LoadOneSymbol(), MODULE::MODULE(), DIALOG_FOOTPRINT_BOARD_EDITOR::OnEditReference(), DIALOG_FOOTPRINT_BOARD_EDITOR::OnEditValue(), DIALOG_LIB_EDIT_PIN::OnPaintShowPanel(), MODULE::operator=(), SCH_COMPONENT::operator=(), PCB_PARSER::parseMODULE_unchecked(), LIB_EDIT_FRAME::pasteClipboard(), PCBNEW_CONTROL::PasteItemsFromClipboard(), FOOTPRINT_EDIT_FRAME::Process_Special_Functions(), BOARD_COMMIT::Push(), FOOTPRINT_PREVIEW_PANEL::renderFootprint(), BOARD_NETLIST_UPDATER::replaceComponent(), BOARD::ReplaceNetlist(), FOOTPRINT_EDIT_FRAME::restoreLastFootprint(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SaveCopyOfZones(), SCH_COMPONENT::SCH_COMPONENT(), SCH_SHEET::SCH_SHEET(), SCH_SHEET_PIN::SCH_SHEET_PIN(), LIB_PART::SetFields(), SetSchItemParent(), PCB_EDIT_FRAME::StartMoveModule(), SCH_SHEET::SwapData(), SCH_COMPONENT::SwapData(), and SwapItemData().

242 { m_Parent = aParent; }
EDA_ITEM * m_Parent
Linked list: Link (parent struct)
Definition: base_struct.h:197
void NETINFO_ITEM::SetPosition ( const wxPoint aPos)
inlineoverridevirtual

Implements BOARD_ITEM.

Definition at line 112 of file netinfo.h.

113  {
114  }
void EDA_ITEM::SetSelected ( )
inlineinherited

Definition at line 256 of file base_struct.h.

References SELECTED, and EDA_ITEM::SetFlags().

Referenced by LIB_EDIT_FRAME::pasteClipboard(), GERBVIEW_SELECTION_TOOL::selectVisually(), and SELECTION_TOOL::selectVisually().

256 { SetFlags( SELECTED ); }
#define SELECTED
Definition: base_struct.h:134
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:282
void EDA_ITEM::SetStatus ( STATUS_FLAGS  aStatus)
inlineinherited
void EDA_ITEM::SetTimeStamp ( timestamp_t  aNewTimeStamp)
inlineinherited

Definition at line 232 of file base_struct.h.

Referenced by BOARD_NETLIST_UPDATER::addNewComponent(), PCAD2KICAD::PCB_TEXT::AddToBoard(), PCAD2KICAD::PCB_LINE::AddToBoard(), PCAD2KICAD::PCB_ARC::AddToBoard(), PCAD2KICAD::PCB_PAD::AddToBoard(), PCAD2KICAD::PCB_POLYGON::AddToBoard(), PCAD2KICAD::PCB_MODULE::AddToBoard(), SCH_EDIT_FRAME::AppendSchematic(), PCB_EDIT_FRAME::Begin_Zone(), SCH_EDIT_FRAME::CreateSheet(), Diagnose(), DuplicateItemsInList(), DuplicateStruct(), EDIT_TOOL::editFootprintInFpEditor(), PCB_EDIT_FRAME::Exchange_Module(), DIALOG_FOOTPRINT_BOARD_EDITOR::GotoModuleEditor(), EDA_ITEM::initVars(), BOARD::InsertArea(), LEGACY_PLUGIN::loadMODULE(), PCB_BASE_FRAME::LoadModuleFromLibrary(), LEGACY_PLUGIN::loadPCB_TARGET(), LEGACY_PLUGIN::loadPCB_TEXT(), EAGLE_PLUGIN::loadPlain(), EAGLE_PLUGIN::loadSignals(), LEGACY_PLUGIN::loadTrackList(), EDA_ITEM::operator=(), EAGLE_PLUGIN::packageCircle(), EAGLE_PLUGIN::packagePolygon(), EAGLE_PLUGIN::packageRectangle(), EAGLE_PLUGIN::packageText(), PCB_PARSER::parseDIMENSION(), SCH_EDIT_FRAME::PasteListOfItems(), FOOTPRINT_EDIT_FRAME::Process_Special_Functions(), PCB_EDIT_FRAME::Process_Special_Functions(), SCH_SCREENS::ReplaceDuplicateTimeStamps(), BOARD::ReplaceNetlist(), SCH_SHEET::SCH_SHEET(), SCH_COMPONENT::SetTimeStamp(), SimilarLabelsDiagnose(), SwapItemData(), and TestDuplicateSheetNames().

232 { m_TimeStamp = aNewTimeStamp; }
timestamp_t m_TimeStamp
Time stamp used for logical links.
Definition: base_struct.h:198
void EDA_ITEM::SetWireImage ( )
inlineinherited

Definition at line 255 of file base_struct.h.

References IS_WIRE_IMAGE, and EDA_ITEM::SetFlags().

Referenced by moveItemWithMouseCursor().

255 { SetFlags( IS_WIRE_IMAGE ); }
void SetFlags(STATUS_FLAGS aMask)
Definition: base_struct.h:282
#define IS_WIRE_IMAGE
Item to be drawn as wireframe while editing.
Definition: base_struct.h:131
wxString BOARD_ITEM::ShowShape ( STROKE_T  aShape)
staticinherited

Function ShowShape converts the enum STROKE_T integer value to a wxString.

Definition at line 39 of file class_board_item.cpp.

References S_ARC, S_CIRCLE, S_CURVE, S_POLYGON, S_RECT, and S_SEGMENT.

Referenced by ConvertOutlineToPolygon(), DRAWSEGMENT::GetCenter(), EDGE_MODULE::GetSelectMenuText(), DRAWSEGMENT::GetSelectMenuText(), DSN::SPECCTRA_DB::makeIMAGE(), DRAWSEGMENT::Rotate(), and BOARD_ITEM::SetLocked().

40 {
41  switch( aShape )
42  {
43  case S_SEGMENT: return _( "Line" );
44  case S_RECT: return _( "Rect" );
45  case S_ARC: return _( "Arc" );
46  case S_CIRCLE: return _( "Circle" );
47  case S_CURVE: return _( "Bezier Curve" );
48  case S_POLYGON: return _( "Polygon" );
49  default: return wxT( "??" );
50  }
51 }
polygon (not yet used for tracks, but could be in microwave apps)
usual segment : line with rounded ends
segment with non rounded ends
Arcs (with rounded ends)
Bezier Curve.
static bool EDA_ITEM::Sort ( const EDA_ITEM aLeft,
const EDA_ITEM aRight 
)
inlinestaticinherited

Function Sort is a helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers.

Parameters
aLeftThe left hand item to compare.
aRightThe right hand item to compare.
Returns
True if aLeft is less than aRight.

Definition at line 492 of file base_struct.h.

References EDA_ITEM::Matches(), EDA_ITEM::operator=(), EDA_ITEM::ViewBBox(), and EDA_ITEM::ViewGetLayers().

Referenced by PART_LIB::GetEntryTypePowerNames().

492 { return *aLeft < *aRight; }
void BOARD_ITEM::SwapData ( BOARD_ITEM aImage)
virtualinherited

Swap data between aItem and aImage.

aItem and aImage should have the same type Used in undo redo command to swap values between an item and its copy Only values like layer, size .. which are modified by edition are swapped, not the pointers like Pnext and Pback because aItem is not changed in the linked list

Parameters
aImage= the item image which contains data to swap

Reimplemented in D_PAD, MODULE, ZONE_CONTAINER, VIA, TRACK, DRAWSEGMENT, DIMENSION, TEXTE_PCB, and PCB_TARGET.

Definition at line 270 of file class_board_item.cpp.

Referenced by BOARD_COMMIT::Revert(), BOARD_ITEM::SetLayer(), and SwapItemData().

271 {
272 
273 }
void BOARD_ITEM::TransformShapeWithClearanceToPolygon ( SHAPE_POLY_SET aCornerBuffer,
int  aClearanceValue,
int  aCircleToSegmentsCount,
double  aCorrectionFactor 
) const
virtualinherited

Reimplemented in D_PAD, ZONE_CONTAINER, DRAWSEGMENT, and TRACK.

Definition at line 275 of file class_board_item.cpp.

Referenced by D_PAD::BuildPadShapePolygon(), and BOARD_ITEM::HitTest().

279  {
280  wxASSERT_MSG(false, wxT("Called TransformShapeWithClearanceToPolygon() on unsupported BOARD_ITEM."));
281 };
KICAD_T EDA_ITEM::Type ( ) const
inlineinherited

Function Type()

returns the type of object. This attribute should never be changed after a constructor sets it, so there is no public "setter" method.

Returns
KICAD_T - the type of object.

Definition at line 227 of file base_struct.h.

References EDA_ITEM::m_StructType.

Referenced by Abort_Move_ModuleOutline(), abortMoveBitmap(), abortMoveItem(), AbortPinMove(), MODULE::Add(), CN_CLUSTER::Add(), BOARD::Add(), CN_CONNECTIVITY_ALGO::Add(), PCB_EDIT_FRAME::Add45DegreeSegment(), SCH_SCREEN::addConnectedItemsToBlock(), POINT_EDITOR::addCorner(), POINT_EDITOR::addCornerCondition(), SCH_EDIT_FRAME::addCurrentItemToList(), AddMenusForComponent(), AddMenusForEditComponent(), SCH_SHEET::AddPin(), PCB_EDIT_FRAME::Attribut_Track(), PCB_EDIT_FRAME::Autoroute(), PCB_EDIT_FRAME::Begin_Route(), SCH_EDIT_FRAME::BeginSegment(), PCB_EDIT_FRAME::Block_Delete(), PCB_EDIT_FRAME::Block_Duplicate(), PCB_EDIT_FRAME::Block_Flip(), PCB_EDIT_FRAME::Block_Move(), PCB_EDIT_FRAME::Block_Rotate(), HIERARCHY_NAVIG_DLG::buildHierarchyTree(), SCH_SCREENS::buildScreenList(), SCH_SHEET_LIST::BuildSheetList(), calcArea(), calcMaxArea(), SCH_JUNCTION::CanConnect(), SCH_NO_CONNECT::CanConnect(), SCH_BUS_WIRE_ENTRY::CanConnect(), SCH_LINE::CanConnect(), SCH_BUS_BUS_ENTRY::CanConnect(), SCH_LABEL::CanConnect(), SCH_GLOBALLABEL::CanConnect(), SCH_HIERLABEL::CanConnect(), SCH_SHEET::CanConnect(), SCH_COMPONENT::CanConnect(), ROUTER_TOOL::CanInlineDrag(), DIALOG_EXCHANGE_FOOTPRINTS::changeSameFootprints(), SCH_SCREENS::ChangeSymbolLibNickname(), SCH_EDIT_FRAME::CheckListConnections(), TEXTE_PCB::ClassOf(), EDGE_MODULE::ClassOf(), BOARD_CONNECTED_ITEM::ClassOf(), TEXTE_MODULE::ClassOf(), DRAWSEGMENT::ClassOf(), TRACK::ClassOf(), ClassOf(), MODULE::ClassOf(), D_PAD::ClassOf(), BOARD::ClassOf(), VIA::ClassOf(), SCH_SHEET::CleanupSheet(), Collect_TrackSegmentsToDrag(), LIB_BEZIER::compare(), LIB_CIRCLE::compare(), LIB_RECTANGLE::compare(), LIB_POLYLINE::compare(), LIB_TEXT::compare(), LIB_ARC::compare(), LIB_FIELD::compare(), LIB_PIN::compare(), SCH_SHEET::ComponentCount(), GRID_HELPER::computeAnchors(), SCH_SCREEN::CountConnectedItems(), SCH_SHEET::CountSheets(), MODULE::CoverageRatio(), LIB_EDIT_FRAME::CreateGraphicItem(), CINFO3D_VISU::createLayers(), BOARD::CreateLockPoint(), SCH_EDIT_FRAME::CreateNewText(), CINFO3D_VISU::createNewTrack(), PCB_EDIT_FRAME::createPopupMenuForTracks(), CreateRoutesSection(), PCB_EDITOR_CONTROL::CrossProbeSchToPcb(), D_PAD::D_PAD(), FOOTPRINT_EDIT_FRAME::Delete_Edge_Module(), PCB_EDIT_FRAME::Delete_Segment_Edge(), SCH_SCREENS::DeleteAllMarkers(), SCH_SCREEN::DeleteItem(), LIB_EDIT_FRAME::deleteItem(), deleteItem(), SCH_EDIT_FRAME::DeleteItem(), DeleteNullTrackSegments(), PYTHON_ACTION_PLUGINS::deregister_action(), DIALOG_SCH_EDIT_ONE_FIELD::DIALOG_SCH_EDIT_ONE_FIELD(), DIALOG_ERC::DisplayERC_MarkersList(), DRC::doTrackDrc(), DRC::doTrackKeepoutDrc(), KIGFX::GERBVIEW_PAINTER::Draw(), KIGFX::PCB_PAINTER::Draw(), KIGFX::PCB_PAINTER::draw(), DrawMovePin(), DrawMovingBlockOutlines(), drawPickedItems(), CN_ITEM::Dump(), BOARD::Duplicate(), MODULE::Duplicate(), PCB_EDIT_FRAME::duplicateItems(), DuplicateItemsInList(), SCH_EDIT_FRAME::EditComponent(), SCH_EDIT_FRAME::EditComponentFieldText(), LIB_EDIT_FRAME::EditSymbolText(), SCH_EDIT_FRAME::EndSegment(), PCB_EDIT_FRAME::EraseRedundantTrack(), ExitSheet(), SCH_SCREEN::ExtractWires(), DRC::fillMarker(), find_vias_and_tracks_at(), SCH_EDIT_FRAME::FindComponentAndItem(), NETLIST_EXPORTER::findNextComponent(), NETLIST_EXPORTER::findNextComponentAndCreatePinList(), SCH_SHEET_PATH::FindNextItem(), SCH_SHEET_LIST::FindNextItem(), SCH_SHEET_PATH::FindPreviousItem(), SCH_SHEET_LIST::FindPreviousItem(), EDIT_TOOL::FootprintFilter(), FootprintWriteShape(), PCB_IO::Format(), PCB_IO::format(), FormatProbeItem(), POINT_EDITOR::get45DegConstrainer(), getAnchorPoint(), TRACK::GetBestInsertPoint(), BOARD_ITEM::GetBoard(), TRACK::GetBoundingBox(), BOARD_CONNECTED_ITEM::GetClearance(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), NETLIST_OBJECT::GetComponentParent(), SCH_SCREEN::GetConnection(), SCH_TEXT::GetConnectionPoints(), SCH_TEXT::GetEndPoints(), SCH_SHEET::GetEndPoints(), GetFirstTrack(), GetFirstVia(), SCH_SCREEN::GetHierarchicalItems(), SCH_SCREENS::GetLibNicknames(), TEXTE_PCB::GetMsgPanelInfo(), SCH_TEXT::GetMsgPanelInfo(), BOARD_CONNECTED_ITEM::GetNetClass(), CONNECTIVITY_DATA::GetNetItems(), LIB_PART::GetNextDrawItem(), DRAWSEGMENT::GetParentModule(), SCH_SCREEN::GetPin(), LIB_PART::GetPin(), SCH_COMPONENT::GetPinPhysicalPosition(), getRect(), SELECTION::GetTopLeftItem(), LIB_EDIT_FRAME::GlobalSetPins(), SELECTION_TOOL::guessSelectionCandidates(), hash_eda(), SCH_SCREENS::HasNoFullyDefinedLibIds(), SCH_SHEET::HasUndefinedPins(), SCH_EDIT_FRAME::ImportSheetPin(), DIALOG_LABEL_EDITOR::InitDialog(), ROUTER_TOOL::InlineDrag(), SCH_COLLECTOR::Inspect(), GENERAL_COLLECTOR::Inspect(), SCH_FIND_COLLECTOR::Inspect(), ARRAY_CREATOR::Invoke(), CN_ANCHOR::IsDangling(), SCH_TEXT::IsDanglingStateChanged(), SCH_COLLECTOR::IsNode(), TRACK::IsNull(), SCH_LINE::IsParallel(), SCH_SCREEN::IsTerminalPoint(), BOARD_ITEM::IsTrack(), itemIsIncludedByFilter(), CLIPBOARD_IO::Load(), PNS_PCBNEW_RULE_RESOLVER::localPadClearance(), SCH_EDIT_FRAME::LocateAndShowItem(), SCH_EDIT_FRAME::LocateItem(), SCH_SHEET::LocatePathOfScreen(), Magnetize(), EDIT_POINTS_FACTORY::Make(), SCH_SCREEN::MarkConnections(), CONNECTIVITY_DATA::MarkItemNetAsDirty(), CN_CONNECTIVITY_ALGO::markItemNetAsDirty(), MarkItemsInBloc(), BOARD::MarkTrace(), TRACKS_CLEANER::mergeCollinearSegmentIfPossible(), TRACKS_CLEANER::MergeCollinearTracks(), SCH_LINE::MergeOverlap(), FOOTPRINT_EDIT_FRAME::ModeditLocateAndDisplay(), moveItemWithMouseCursor(), MoveMarkedItems(), MoveMarkedItemsExactly(), ROUTER_TOOL::NeighboringSegmentFilter(), SCH_EDIT_FRAME::OnConvertTextType(), SCH_EDIT_FRAME::OnCopySchematicItemRequest(), SCH_EDIT_FRAME::OnDragItem(), SCH_EDIT_FRAME::OnEditItem(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), PCB_EDIT_FRAME::OnEditItemRequest(), SCH_EDIT_FRAME::OnHotKey(), PCB_EDIT_FRAME::OnHotkeyCopyItem(), FOOTPRINT_EDIT_FRAME::OnHotkeyDeleteItem(), PCB_EDIT_FRAME::OnHotkeyDeleteItem(), FOOTPRINT_EDIT_FRAME::OnHotkeyDuplicateItem(), PCB_EDIT_FRAME::OnHotkeyDuplicateOrArrayItem(), FOOTPRINT_EDIT_FRAME::OnHotkeyEditItem(), PCB_EDIT_FRAME::OnHotkeyEditItem(), PCB_EDIT_FRAME::OnHotkeyFlipItem(), FOOTPRINT_EDIT_FRAME::OnHotkeyMoveItem(), PCB_EDIT_FRAME::OnHotkeyMoveItem(), FOOTPRINT_EDIT_FRAME::OnHotkeyMoveItemExact(), PCB_EDIT_FRAME::OnHotkeyPlaceItem(), FOOTPRINT_EDIT_FRAME::OnHotkeyRotateItem(), PCB_EDIT_FRAME::OnHotkeyRotateItem(), FOOTPRINT_EDIT_FRAME::OnLeftClick(), LIB_EDIT_FRAME::OnLeftClick(), SCH_EDIT_FRAME::OnLeftClick(), PCB_EDIT_FRAME::OnLeftClick(), LIB_EDIT_FRAME::OnLeftDClick(), SCH_EDIT_FRAME::OnLeftDClick(), PCB_EDIT_FRAME::OnLeftDClick(), SCH_EDIT_FRAME::OnMoveItem(), SCH_EDIT_FRAME::OnOpenLibraryEditor(), SCH_EDIT_FRAME::OnOrient(), FOOTPRINT_EDIT_FRAME::OnRightClick(), LIB_EDIT_FRAME::OnRightClick(), SCH_EDIT_FRAME::OnRightClick(), PCB_EDIT_FRAME::OnRightClick(), SCH_EDIT_FRAME::OnRotate(), SCH_EDIT_FRAME::OnSelectUnit(), SCH_LINE::operator<(), LIB_ITEM::operator<(), SCH_ITEM::operator<(), SCH_COMPONENT::operator<(), SCH_BITMAP::operator=(), SCH_SHEET::operator=(), SCH_COMPONENT::operator=(), LIB_ITEM::operator==(), OrCell_Trace(), SCH_EDIT_FRAME::OrientComponent(), BOARD_COMMIT::parentObject(), PCBNEW_CONTROL::PasteItemsFromClipboard(), SCH_EDIT_FRAME::PasteListOfItems(), PCB_BASE_FRAME::PcbGeneralLocateAndDisplay(), LIB_EDIT_FRAME::PlacePin(), SCH_FIELD::Plot(), BRDITEMS_PLOTTER::Plot_1_EdgeModule(), SCH_EDIT_FRAME::PrepareMoveItem(), GAL_ARRAY_CREATOR::prePushAction(), PCB_EDIT_FRAME::PrintPage(), FOOTPRINT_EDIT_FRAME::Process_Special_Functions(), LIB_EDIT_FRAME::Process_Special_Functions(), SCH_EDIT_FRAME::Process_Special_Functions(), PCB_EDIT_FRAME::Process_Special_Functions(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), RedrawWhileMovingCursor(), DIALOG_SYMBOL_REMAP::remapSymbolsToLibTable(), MODULE::Remove(), BOARD::Remove(), CN_CONNECTIVITY_ALGO::Remove(), POINT_EDITOR::removeCorner(), POINT_EDITOR::removeCornerCondition(), LIB_PART::RemoveDrawItem(), TRACKS_CLEANER::removeDuplicatesOfTrack(), SCH_SHEET::RemovePin(), FOOTPRINT_EDIT_FRAME::RemoveStruct(), PCB_EDIT_FRAME::RemoveStruct(), SCH_EDIT_FRAME::RepeatDrawItem(), LIB_EDIT_FRAME::RepeatPinItem(), SCH_SCREENS::ReplaceDuplicateTimeStamps(), SCH_SCREEN::ReplaceWires(), GERBVIEW_SELECTION_TOOL::RequestSelection(), SELECTION_TOOL::RequestSelection(), PCB_EDIT_FRAME::Reset_All_Tracks_And_Vias_To_Netclass_Values(), PCB_BASE_FRAME::ResetTextSize(), SCH_EDIT_FRAME::ReSizeSheet(), BOARD_COMMIT::Revert(), SCH_EDIT_FRAME::RotateField(), SCH_LEGACY_PLUGIN_CACHE::saveArc(), SCH_LEGACY_PLUGIN_CACHE::saveBezier(), SCH_LEGACY_PLUGIN_CACHE::saveCircle(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SCH_LEGACY_PLUGIN_CACHE::saveField(), SCH_LEGACY_PLUGIN_CACHE::savePin(), SCH_LEGACY_PLUGIN_CACHE::savePolyLine(), SCH_LEGACY_PLUGIN_CACHE::saveRectangle(), SCH_LEGACY_PLUGIN_CACHE::saveText(), SCH_EDIT_FRAME::SaveUndoItemInUndoList(), SCH_EDIT_FRAME::SchematicCleanUp(), CN_CONNECTIVITY_ALGO::searchConnections(), SCH_SHEET::SearchHierarchy(), SELECTION_TOOL::select(), SELECTION_TOOL::selectable(), SCH_SCREEN::SelectBlockItems(), PCB_EDIT_FRAME::SelectHighLight(), SELECTION_TOOL::selectVisually(), ITEM_PICKER::SetItem(), SetSchItemParent(), DIALOG_LABEL_EDITOR::SetTitle(), PCB_EDIT_FRAME::SetTrackSegmentWidth(), PCB_EDIT_FRAME::Show_1_Ratsnest(), Show_MoveNode(), ShowClearance(), ShowNewTrackWhenMovingCursor(), SortByTimeStamp(), PCB_EDIT_FRAME::Start_DragTrackSegmentAndKeepSlope(), LIB_EDIT_FRAME::StartMoveDrawSymbol(), PCB_EDIT_FRAME::StartMoveOneNodeOrSegment(), SCH_NO_CONNECT::SwapData(), SCH_JUNCTION::SwapData(), SCH_BITMAP::SwapData(), PCB_TARGET::SwapData(), SCH_FIELD::SwapData(), SCH_SHEET_PIN::SwapData(), TEXTE_PCB::SwapData(), DIMENSION::SwapData(), DRAWSEGMENT::SwapData(), TRACK::SwapData(), SCH_SHEET::SwapData(), SCH_COMPONENT::SwapData(), VIA::SwapData(), ZONE_CONTAINER::SwapData(), MODULE::SwapData(), D_PAD::SwapData(), SwapItemData(), PCB_EDIT_FRAME::SwitchLayer(), TestDuplicateSheetNames(), TRACKS_CLEANER::testTrackEndpointDangling(), TEXTE_MODULE::TEXTE_MODULE(), DIALOG_LABEL_EDITOR::TextPropertiesAccept(), TraceSegmentPcb(), TRACK::TransformShapeWithClearanceToPolygon(), SELECTION_TOOL::unselectVisually(), SCH_SHEET_PATH::UpdateAllScreenReferences(), DIALOG_SCH_EDIT_ONE_FIELD::UpdateField(), POINT_EDITOR::updateItem(), POINT_EDITOR::updatePoints(), PCB_BRIGHT_BOX::ViewDraw(), TRACK::Visit(), GERBER_DRAW_ITEM::Visit(), EDA_ITEM::Visit(), SCH_SHEET::Visit(), and SCH_COMPONENT::Visit().

228  {
229  return m_StructType;
230  }
KICAD_T m_StructType
Run time identification, keep private so it can never be changed after a constructor sets it...
Definition: base_struct.h:189
void BOARD_ITEM::UnLink ( )
virtualinherited

Function UnLink detaches this object from its owner.

This base class implementation should work for all derived classes which are held in a DLIST<>.

Definition at line 54 of file class_board_item.cpp.

References EDA_ITEM::GetList().

Referenced by PCB_EDIT_FRAME::Block_Delete(), PCB_EDIT_FRAME::Delete_Segment_Edge(), PCB_EDIT_FRAME::Delete_Texte_Pcb(), PCB_EDIT_FRAME::DeleteDimension(), PCB_EDIT_FRAME::DeleteTarget(), PCB_EDIT_FRAME::EraseRedundantTrack(), BOARD::MarkTrace(), and BOARD_ITEM::SetLocked().

55 {
57  wxASSERT( list );
58 
59  if( list )
60  list->Remove( this );
61 }
DHEAD * GetList() const
Definition: base_struct.h:238
const BOX2I EDA_ITEM::ViewBBox ( ) const
overridevirtualinherited

Function ViewBBox() returns the bounding box of the item covering all its layers.

Returns
BOX2I - the current bounding box

Implements KIGFX::VIEW_ITEM.

Reimplemented in D_PAD, MODULE, EDIT_POINTS, GERBER_DRAW_ITEM, DRAWSEGMENT, DIMENSION, TEXTE_MODULE, MARKER_PCB, KIGFX::WORKSHEET_VIEWITEM, ROUTER_PREVIEW_ITEM, KIGFX::PREVIEW::CENTRELINE_RECT_ITEM, KIGFX::ORIGIN_VIEWITEM, KIGFX::PREVIEW::POLYGON_ITEM, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::PREVIEW::RULER_ITEM, KIGFX::RATSNEST_VIEWITEM, BRIGHT_BOX, and KIGFX::PREVIEW::ARC_ASSISTANT.

Definition at line 267 of file base_struct.cpp.

References EDA_ITEM::GetBoundingBox().

Referenced by SELECTION_TOOL::selectable(), SELECTION_TOOL::selectMultiple(), EDA_ITEM::Sort(), BRIGHT_BOX::ViewBBox(), DIMENSION::ViewBBox(), DRAWSEGMENT::ViewBBox(), BRIGHT_BOX::ViewDraw(), and COMMON_TOOLS::ZoomFitScreen().

268 {
269  // Basic fallback
270  return BOX2I( VECTOR2I( GetBoundingBox().GetOrigin() ),
271  VECTOR2I( GetBoundingBox().GetSize() ) );
272 }
virtual const EDA_RECT GetBoundingBox() const
Function GetBoundingBox returns the orthogonal, bounding box of this object for display purposes...
BOX2< VECTOR2I > BOX2I
Definition: box2.h:468
VECTOR2< int > VECTOR2I
Definition: vector2d.h:589
virtual void KIGFX::VIEW_ITEM::ViewDraw ( int  aLayer,
VIEW aView 
) const
inlinevirtualinherited

Function ViewDraw() Draws the parts of the object belonging to layer aLayer.

viewDraw() is an alternative way for drawing objects if if there is no PAINTER assigned for the view or if the PAINTER doesn't know how to paint this particular implementation of VIEW_ITEM. The preferred way of drawing is to design an appropriate PAINTER object, the method below is intended only for quick hacks and debugging purposes.

Parameters
aLayercurrent drawing layer
aViewpointer to the VIEW device we are drawing on

Reimplemented in EDIT_POINTS, KIGFX::WORKSHEET_VIEWITEM, ROUTER_PREVIEW_ITEM, KIGFX::VIEW_GROUP, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::PREVIEW::SIMPLE_OVERLAY_ITEM, KIGFX::ORIGIN_VIEWITEM, BRIGHT_BOX, KIGFX::PREVIEW::RULER_ITEM, KIGFX::RATSNEST_VIEWITEM, KIGFX::PREVIEW::ARC_ASSISTANT, and PCB_BRIGHT_BOX.

Definition at line 115 of file view_item.h.

References KIGFX::VIEW_ITEM::ViewGetLayers().

Referenced by KIGFX::VIEW::draw(), and KIGFX::VIEW::updateItemGeometry().

116  {}
void BOARD_ITEM::ViewGetLayers ( int  aLayers[],
int &  aCount 
) const
overridevirtualinherited

Function ViewGetLayers() Returns the all the layers within the VIEW the object is painted on.

For instance, a D_PAD spans zero or more copper layers and a few technical layers. ViewDraw() or PAINTER::Draw() is repeatedly called for each of the layers returned by ViewGetLayers(), depending on the rendering order.

Parameters
aLayers[]output layer index array
aCountnumber of layer indices in aLayers[]

Reimplemented from EDA_ITEM.

Reimplemented in D_PAD, MODULE, VIA, TRACK, TEXTE_MODULE, ZONE_CONTAINER, MARKER_PCB, and KIGFX::ORIGIN_VIEWITEM.

Definition at line 199 of file class_board_item.cpp.

References BOARD_ITEM::m_Layer.

Referenced by BOARD_ITEM::HitTest(), and SELECTION_TOOL::selectable().

200 {
201  // Basic fallback
202  aCount = 1;
203  aLayers[0] = m_Layer;
204 }
PCB_LAYER_ID m_Layer
virtual unsigned int KIGFX::VIEW_ITEM::ViewGetLOD ( int  aLayer,
VIEW aView 
) const
inlinevirtualinherited

Function ViewGetLOD() Returns the level of detail (LOD) of the item.

A level of detail is the minimal VIEW scale that is sufficient for an item to be shown on a given layer.

Parameters
aLayercurrent drawing layer
aViewpointer to the VIEW device we are drawing on
Returns
the level of detail. 0 always show the item, because the actual zoom level (or VIEW scale) is always > 0

Reimplemented in D_PAD, MODULE, VIA, GERBER_DRAW_ITEM, TRACK, TEXTE_MODULE, and EDGE_MODULE.

Definition at line 139 of file view_item.h.

Referenced by KIGFX::VIEW::drawItem::operator()().

140  {
141  // By default always show the item
142  return 0;
143  }
SEARCH_RESULT EDA_ITEM::Visit ( INSPECTOR  inspector,
void *  testData,
const KICAD_T  scanTypes[] 
)
virtualinherited

Function Visit may be re-implemented for each derived class in order to handle all the types given by its member data.

Implementations should call inspector->Inspect() on types in scanTypes[], and may use IterateForward() to do so on lists of such data.

Parameters
inspectorAn INSPECTOR instance to use in the inspection.
testDataArbitrary data used by the inspector.
scanTypesWhich KICAD_T types are of interest and the order is significant too, terminated by EOT.
Returns
SEARCH_RESULT SEARCH_QUIT if the Iterator is to stop the scan, else SCAN_CONTINUE, and determined by the inspector.

Reimplemented in BOARD, MODULE, SCH_COMPONENT, SCH_SHEET, GERBER_FILE_IMAGE, GERBER_DRAW_ITEM, TRACK, and GBR_LAYOUT.

Definition at line 151 of file base_struct.cpp.

References EOT, EDA_ITEM::GetClass(), SEARCH_CONTINUE, SEARCH_QUIT, and EDA_ITEM::Type().

Referenced by SCH_SHEET::CanConnect(), GERBER_COLLECTOR::Collect(), GENERAL_COLLECTOR::Collect(), PCB_TYPE_COLLECTOR::Collect(), PCB_LAYER_COLLECTOR::Collect(), EDA_ITEM::HitTest(), and EDA_ITEM::IterateForward().

152 {
153  KICAD_T stype;
154 
155 #if 0 && defined(DEBUG)
156  std::cout << GetClass().mb_str() << ' ';
157 #endif
158 
159  for( const KICAD_T* p = scanTypes; (stype = *p) != EOT; ++p )
160  {
161  // If caller wants to inspect my type
162  if( stype == Type() )
163  {
164  if( SEARCH_QUIT == inspector( this, testData ) )
165  return SEARCH_QUIT;
166 
167  break;
168  }
169  }
170 
171  return SEARCH_CONTINUE;
172 }
KICAD_T Type() const
Function Type()
Definition: base_struct.h:227
search types array terminator (End Of Types)
Definition: typeinfo.h:82
KICAD_T
Enum KICAD_T is the set of class identification values, stored in EDA_ITEM::m_StructType.
Definition: typeinfo.h:78
virtual wxString GetClass() const =0
Function GetClass returns the class name.

Friends And Related Function Documentation

friend class NETINFO_LIST
friend

Definition at line 71 of file netinfo.h.

Member Data Documentation

STATUS_FLAGS EDA_ITEM::m_Flags
protectedinherited

Flag bits for editing and other uses.

Definition at line 204 of file base_struct.h.

Referenced by LIB_CIRCLE::BeginEdit(), LIB_RECTANGLE::BeginEdit(), LIB_POLYLINE::BeginEdit(), LIB_TEXT::BeginEdit(), LIB_ARC::BeginEdit(), LIB_FIELD::BeginEdit(), LIB_CIRCLE::calcEdit(), LIB_POLYLINE::calcEdit(), LIB_RECTANGLE::calcEdit(), LIB_TEXT::calcEdit(), LIB_ARC::calcEdit(), LIB_FIELD::calcEdit(), LIB_TEXT::Clone(), LIB_CIRCLE::ContinueEdit(), LIB_RECTANGLE::ContinueEdit(), LIB_POLYLINE::ContinueEdit(), LIB_TEXT::ContinueEdit(), LIB_ARC::ContinueEdit(), LIB_FIELD::ContinueEdit(), SCH_LINE::Draw(), TRACK::Draw(), DRAWSEGMENT::Draw(), MODULE::Draw(), SEGZONE::Draw(), LIB_CIRCLE::drawGraphic(), LIB_POLYLINE::drawGraphic(), LIB_RECTANGLE::drawGraphic(), LIB_BEZIER::drawGraphic(), LIB_ARC::drawGraphic(), DRAWSEGMENT::DRAWSEGMENT(), LIB_CIRCLE::EndEdit(), LIB_RECTANGLE::EndEdit(), LIB_POLYLINE::EndEdit(), LIB_TEXT::EndEdit(), LIB_ARC::EndEdit(), LIB_ITEM::EndEdit(), LIB_FIELD::EndEdit(), EDA_ITEM::GetFlags(), TRACK::GetMsgPanelInfoBase_Common(), SCH_JUNCTION::HitTest(), SCH_LINE::HitTest(), GERBER_DRAW_ITEM::HitTest(), SCH_COMPONENT::HitTest(), LIB_ITEM::InEditMode(), EDA_ITEM::initVars(), SCH_ITEM::IsConnected(), SCH_LINE::Move(), EDA_ITEM::operator=(), SCH_COMPONENT::SCH_COMPONENT(), LIB_PIN::SetConversion(), LIB_PIN::SetLength(), LIB_PIN::SetName(), LIB_PIN::SetNameTextSize(), LIB_PIN::SetNumberTextSize(), LIB_PIN::SetOrientation(), LIB_PIN::SetPartNumber(), LIB_PIN::SetPinPosition(), LIB_PIN::SetShape(), LIB_PIN::SetType(), and LIB_PIN::SetVisible().

bool EDA_ITEM::m_forceVisible
protectedinherited

Set to true to override the visibility setting of the item.

Definition at line 201 of file base_struct.h.

Referenced by SCH_FIELD::Draw(), EDA_ITEM::initVars(), and EDA_ITEM::operator=().

DHEAD* EDA_ITEM::m_List
protectedinherited

which DLIST I am on.

Definition at line 195 of file base_struct.h.

Referenced by EDA_ITEM::GetList(), and EDA_ITEM::initVars().

NETCLASSPTR NETINFO_ITEM::m_NetClass
private

Definition at line 81 of file netinfo.h.

Referenced by NETINFO_ITEM(), and SetClass().

int NETINFO_ITEM::m_NetCode
private

A number equivalent to the net name.

Used for fast comparisons in ratsnest and DRC computations.

Definition at line 74 of file netinfo.h.

Referenced by NETINFO_LIST::AppendNet(), and NETINFO_LIST::RemoveNet().

wxString NETINFO_ITEM::m_Netname
private

Full net name like /mysheet/mysubsheet/vout used by Eeschema.

Definition at line 77 of file netinfo.h.

BOARD* NETINFO_ITEM::m_parent
private

The parent board the net belongs to.

Definition at line 83 of file netinfo.h.

Referenced by GetMsgPanelInfo(), NETINFO_ITEM(), and SetClass().

wxString NETINFO_ITEM::m_ShortNetname
private

short net name, like vout from /mysheet/mysubsheet/vout

Definition at line 79 of file netinfo.h.

EDA_ITEM* EDA_ITEM::Pback
protectedinherited

previous in linked list

Definition at line 194 of file base_struct.h.

Referenced by SCH_LINE::Back(), TRACK::Back(), BOARD_ITEM::Back(), EDA_ITEM::Back(), EDA_ITEM::initVars(), and TRACK::SetBack().


The documentation for this class was generated from the following files: