KiCad PCB EDA Suite
LENGTH_TUNER_TOOL Class Reference

#include <length_tuner_tool.h>

Inheritance diagram for LENGTH_TUNER_TOOL:
PNS::TOOL_BASE PCB_TOOL TOOL_INTERACTIVE TOOL_BASE

Public Types

enum  RESET_REASON { RUN, MODEL_RELOAD, GAL_SWITCH }
 

Determines the reason of reset for a tool

More...
 

Public Member Functions

 LENGTH_TUNER_TOOL ()
 
 ~LENGTH_TUNER_TOOL ()
 
void Reset (RESET_REASON aReason) override
 Function Reset() Brings the tool to a known, initial state. More...
 
int TuneSingleTrace (const TOOL_EVENT &aEvent)
 
int TuneDiffPair (const TOOL_EVENT &aEvent)
 
int TuneDiffPairSkew (const TOOL_EVENT &aEvent)
 
void setTransitions () override
 This method is meant to be overridden in order to specify handlers for events. More...
 
ROUTER * Router () const
 
virtual bool Init () override
 Function Init() Init() is called once upon a registration of the tool. More...
 
void SetEditModules (bool aEnabled)
 Function SetEditModules() More...
 
bool EditingModules () const
 
void Activate ()
 Function Activate() Runs the tool. More...
 
void SetContextMenu (CONTEXT_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Function SetContextMenu() More...
 
void RunMainStack (std::function< void()> aFunc)
 Function RunMainStack() More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Go() More...
 
OPT_TOOL_EVENT Wait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Wait() More...
 
TOOL_TYPE GetType () const
 Function GetType() Returns the type of the tool. More...
 
TOOL_ID GetId () const
 Function GetId() Returns the unique identifier of the tool. More...
 
const std::string & GetName () const
 Function GetName() Returns the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool. More...
 
TOOL_SETTINGSGetSettings ()
 
bool IsToolActive () const
 

Protected Types

enum  INTERACTIVE_PLACEMENT_OPTIONS {
  IPO_ROTATE = 1, IPO_FLIP = 2, IPO_PROPERTIES = 4, IPO_SINGLE_CLICK = 8,
  IPO_REPEAT = 16
}
 

Protected Member Functions

bool checkSnap (ITEM *aItem)
 
const VECTOR2I snapToItem (bool aEnabled, ITEM *aItem, VECTOR2I aP)
 
virtual ITEM * pickSingleItem (const VECTOR2I &aWhere, int aNet=-1, int aLayer=-1, bool aIgnorePads=false)
 
virtual void highlightNet (bool aEnabled, int aNetcode=-1)
 
virtual void updateStartItem (const TOOL_EVENT &aEvent, bool aIgnorePads=false)
 
virtual void updateEndItem (const TOOL_EVENT &aEvent)
 
void deleteTraces (ITEM *aStartItem, bool aWholeTrack)
 
void doInteractiveItemPlacement (INTERACTIVE_PLACER_BASE *aPlacer, const wxString &aCommitMessage, int aOptions=IPO_ROTATE|IPO_FLIP|IPO_REPEAT)
 Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc. More...
 
KIGFX::PCB_VIEWview () const
 
KIGFX::VIEW_CONTROLScontrols () const
 
PCB_EDIT_FRAMEframe () const
 
BOARDboard () const
 
MODULEmodule () const
 
PCB_DISPLAY_OPTIONSdisplayOptions () const
 
PCB_DRAW_PANEL_GALcanvas () const
 
const SELECTIONselection () const
 
SELECTIONselection ()
 
const TOOL_EVENT evActivate (std::string aToolName="")
 functions below are not yet implemented - their interface may change More...
 
const TOOL_EVENT evCommand (int aCommandId=-1)
 
const TOOL_EVENT evCommand (std::string aCommandStr="")
 
const TOOL_EVENT evMotion ()
 
const TOOL_EVENT evClick (int aButton=BUT_ANY)
 
const TOOL_EVENT evDrag (int aButton=BUT_ANY)
 
const TOOL_EVENT evButtonUp (int aButton=BUT_ANY)
 
const TOOL_EVENT evButtonDown (int aButton=BUT_ANY)
 
void attachManager (TOOL_MANAGER *aManager)
 Function attachManager() More...
 
KIGFX::VIEWgetView () const
 Function getView() More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Function getViewControls() More...
 
template<typename T >
T * getEditFrame () const
 Function getEditFrame() More...
 
template<typename T >
T * getModel () const
 Function getModel() More...
 

Protected Attributes

MSG_PANEL_ITEMS m_panelItems
 
ROUTING_SETTINGS m_savedSettings
 Stores routing settings between router invocations. More...
 
SIZES_SETTINGS m_savedSizes
 Stores sizes settings between router invocations. More...
 
ITEM * m_startItem
 
int m_startLayer
 
VECTOR2I m_startSnapPoint
 
ITEM * m_endItem
 
VECTOR2I m_endSnapPoint
 
GRID_HELPERm_gridHelper
 
PNS_KICAD_IFACEm_iface
 
ROUTER * m_router
 
TOOL_MENU m_menu
 Menu model displayed by the tool. More...
 
bool m_editModules
 
TOOL_TYPE m_type
 

Stores the type of the tool.

More...
 
TOOL_ID m_toolId
 

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

More...
 
std::string m_toolName
 

Name of the tool.

More...
 
TOOL_MANAGERm_toolMgr
 
TOOL_SETTINGS m_toolSettings
 

Private Member Functions

void performTuning ()
 
int mainLoop (PNS::ROUTER_MODE aMode)
 
void updateStatusPopup (PNS_TUNE_STATUS_POPUP &aPopup)
 
int routerOptionsDialog (const TOOL_EVENT &aEvent)
 
int meanderSettingsDialog (const TOOL_EVENT &aEvent)
 

Private Attributes

PNS::MEANDER_SETTINGS m_savedMeanderSettings
 

Detailed Description

Definition at line 31 of file length_tuner_tool.h.

Member Enumeration Documentation

enum PCB_TOOL::INTERACTIVE_PLACEMENT_OPTIONS
protectedinherited
Enumerator
IPO_ROTATE 
IPO_FLIP 
IPO_PROPERTIES 
IPO_SINGLE_CLICK 
IPO_REPEAT 

Definition at line 109 of file pcb_tool.h.

enum TOOL_BASE::RESET_REASON
inherited

Determines the reason of reset for a tool

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

Definition at line 80 of file tool_base.h.

81  {
82  RUN,
83  MODEL_RELOAD,
84  GAL_SWITCH
85  };
Model changes (required full reload)
Definition: tool_base.h:83
Tool is invoked after being inactive.
Definition: tool_base.h:82
Rendering engine changes.
Definition: tool_base.h:84

Constructor & Destructor Documentation

LENGTH_TUNER_TOOL::LENGTH_TUNER_TOOL ( )

Definition at line 83 of file length_tuner_tool.cpp.

83  :
84  TOOL_BASE( "pcbnew.LengthTuner" )
85 {
86 }
TOOL_BASE(const std::string &aToolName)
LENGTH_TUNER_TOOL::~LENGTH_TUNER_TOOL ( )

Definition at line 117 of file length_tuner_tool.cpp.

118 {
119 }

Member Function Documentation

void TOOL_INTERACTIVE::Activate ( )
inherited

Function Activate() Runs the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 49 of file tool_interactive.cpp.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), PCBNEW_CONTROL::DeleteItemCursor(), EDIT_TOOL::doCopyToClipboard(), PCB_TOOL::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::drawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), MODULE_EDITOR_TOOLS::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), PCB_EDITOR_CONTROL::HighlightNetCursor(), ROUTER_TOOL::InlineDrag(), EDIT_TOOL::Main(), mainLoop(), ROUTER_TOOL::mainLoop(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), EDIT_TOOL::pickCopyReferencePoint(), DRAWING_TOOL::PlaceDXF(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), and PCB_EDITOR_CONTROL::ShowLocalRatsnest().

50 {
52 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:210
bool InvokeTool(TOOL_ID aToolId)
Function InvokeTool() Calls a tool by sending a tool activation event to tool of given ID...
void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Function attachManager()

Sets the TOOL_MANAGER the tool will belong to. Called by TOOL_MANAGER::RegisterTool()

Definition at line 59 of file tool_base.cpp.

References TOOL_BASE::m_toolMgr, TOOL_BASE::m_toolSettings, and TOOL_BASE::TOOL_SETTINGS.

Referenced by TOOL_MANAGER::RegisterTool().

60 {
61  m_toolMgr = aManager;
62  m_toolSettings = TOOL_SETTINGS( this );
63 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
TOOL_SETTINGS m_toolSettings
Definition: tool_base.h:216
friend class TOOL_SETTINGS
Definition: tool_base.h:155
BOARD* PCB_TOOL::board ( ) const
inlineprotectedinherited

Definition at line 140 of file pcb_tool.h.

Referenced by PCBNEW_CONTROL::AppendBoard(), AUTOPLACE_TOOL::autoplace(), PCB_EDITOR_CONTROL::calculateSelectionRatsnest(), EDIT_TOOL::changeTrackWidthOnClick(), PCB_EDITOR_CONTROL::ClearHighlight(), MICROWAVE_TOOL::createInductorBetween(), MODULE_EDITOR_TOOLS::CreatePadFromShapes(), ROUTER_TOOL::CustomTrackWidthDialog(), EDIT_TOOL::doCopyToClipboard(), PCB_TOOL::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawSegment(), MODULE_EDITOR_TOOLS::EnumeratePads(), MODULE_EDITOR_TOOLS::ExplodePadToShapes(), SELECTION_TOOL::filterSelection(), POINT_EDITOR::finishItem(), SELECTION_TOOL::getCollectorsGuide(), PCBNEW_CONTROL::GraphicDisplayMode(), PAD_TOOL::haveFootprints(), highlightNet(), PCBNEW_CONTROL::LayerNext(), PCBNEW_CONTROL::LayerPrev(), PCBNEW_CONTROL::ModuleEdgeOutlines(), PCBNEW_CONTROL::ModuleTextOutlines(), ROUTER_TOOL::onTrackViaSizeChanged(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::PadDisplayMode(), PCBNEW_CONTROL::PasteItemsFromClipboard(), PCBNEW_CONTROL::placeBoardItems(), MODULE_EDITOR_TOOLS::PlacePad(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), ZONE_FILLER_TOOL::SegzoneDeleteFill(), SELECTION_TOOL::selectable(), SELECTION_TOOL::selectAllItemsConnectedToItem(), SELECTION_TOOL::selectAllItemsConnectedToTrack(), SELECTION_TOOL::selectAllItemsOnNet(), SELECTION_TOOL::selectAllItemsOnSheet(), SELECTION_TOOL::selectPoint(), PCB_EDITOR_CONTROL::ShowLocalRatsnest(), PCBNEW_CONTROL::TrackDisplayMode(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), PCBNEW_CONTROL::ViaDisplayMode(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), PCBNEW_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), ZONE_FILLER_TOOL::ZoneFillAll(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfillAll().

140 { return getModel<BOARD>(); }
PCB_DRAW_PANEL_GAL * PCB_TOOL::canvas ( ) const
protectedinherited
bool TOOL_BASE::checkSnap ( ITEM aItem)
protectedinherited

Definition at line 220 of file pns_tool_base.cpp.

References CAPTURE_ALWAYS, CAPTURE_CURSOR_IN_TRACK_TOOL, PCB_TOOL::frame(), PNS::TOOL_BASE::m_router, PNS::ITEM::OfKind(), PNS::ITEM::SEGMENT_T, PNS::ROUTER::Settings(), PCB_BASE_FRAME::Settings(), PNS::ITEM::SOLID_T, and PNS::ITEM::VIA_T.

Referenced by PNS::TOOL_BASE::updateEndItem(), and PNS::TOOL_BASE::updateStartItem().

221 {
222  bool doSnap = false;
223 
224  // Sync PNS engine settings with the general PCB editor options. I know the code below is awful, but...
225  auto& pnss = m_router->Settings();
226  const auto& gens = frame()->Settings();
227 
228  pnss.SetSnapToTracks( false );
229  pnss.SetSnapToPads( false );
230 
231  if( gens.m_magneticPads == CAPTURE_CURSOR_IN_TRACK_TOOL || gens.m_magneticPads == CAPTURE_ALWAYS )
232  pnss.SetSnapToPads( true );
233 
234  if( gens.m_magneticTracks == CAPTURE_CURSOR_IN_TRACK_TOOL || gens.m_magneticTracks == CAPTURE_ALWAYS )
235  pnss.SetSnapToTracks( true );
236 
237  if( aItem )
238  {
239  if( ( aItem->OfKind( ITEM::VIA_T ) || aItem->OfKind( ITEM::SEGMENT_T ) ) && pnss.GetSnapToTracks() )
240  doSnap = true;
241  else if( aItem->OfKind( ITEM::SOLID_T ) && pnss.GetSnapToPads() )
242  doSnap = true;
243  }
244 
245  return doSnap;
246 }
PCB_GENERAL_SETTINGS & Settings()
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
ROUTER * m_router
Definition: pns_tool_base.h:77
ROUTING_SETTINGS & Settings()
Definition: pns_router.h:187
void TOOL_BASE::deleteTraces ( ITEM aStartItem,
bool  aWholeTrack 
)
protectedinherited

Definition at line 337 of file pns_tool_base.cpp.

References PNS::TOPOLOGY::AssembleTrivialPath(), PNS::NODE::Branch(), PNS::ROUTER::CommitRouting(), PNS::ROUTER::GetWorld(), PNS::ITEM_SET::Items(), PNS::TOOL_BASE::m_router, and PNS::NODE::Remove().

338 {
339  NODE *node = m_router->GetWorld()->Branch();
340 
341  if( !aStartItem )
342  return;
343 
344  if( !aWholeTrack )
345  {
346  node->Remove( aStartItem );
347  }
348  else
349  {
350  TOPOLOGY topo( node );
351  ITEM_SET path = topo.AssembleTrivialPath( aStartItem );
352 
353  for( auto ent : path.Items() )
354  node->Remove( ent.item );
355  }
356 
357  m_router->CommitRouting( node );
358 }
NODE * Branch()
Function Branch()
Definition: pns_node.cpp:107
NODE * GetWorld() const
Definition: pns_router.h:143
ROUTER * m_router
Definition: pns_tool_base.h:77
void Remove(SOLID *aSolid)
Function Remove()
Definition: pns_node.cpp:729
void CommitRouting(NODE *aNode)
Definition: pns_router.cpp:350
PCB_DISPLAY_OPTIONS * PCB_TOOL::displayOptions ( ) const
protectedinherited

Definition at line 235 of file pcb_tool.cpp.

References PCB_TOOL::frame(), and PCB_BASE_FRAME::GetDisplayOptions().

Referenced by PCBNEW_CONTROL::GraphicDisplayMode(), PCBNEW_CONTROL::HighContrastMode(), PCBNEW_CONTROL::ModuleEdgeOutlines(), PCBNEW_CONTROL::ModuleTextOutlines(), PCBNEW_CONTROL::PadDisplayMode(), PNS::TOOL_BASE::pickSingleItem(), PCBNEW_CONTROL::TrackDisplayMode(), PCBNEW_CONTROL::ViaDisplayMode(), and PCBNEW_CONTROL::ZoneDisplayMode().

236 {
237  return static_cast<PCB_DISPLAY_OPTIONS*>( frame()->GetDisplayOptions() );
238 }
void * GetDisplayOptions() override
Function GetDisplayOptions returns the display options current in use Display options are relative to...
Class PCB_DISPLAY_OPTIONS handles display options like enable/disable some optional drawings...
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
void PCB_TOOL::doInteractiveItemPlacement ( INTERACTIVE_PLACER_BASE aPlacer,
const wxString &  aCommitMessage,
int  aOptions = IPO_ROTATE | IPO_FLIP | IPO_REPEAT 
)
protectedinherited

Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.

More complex interactive processes are not supported here, you should implement a customised event loop for those.

Parameters
aItemCreatorthe callable that will attempt to create the item
aCommitMessagethe message used on a successful commit

Definition at line 39 of file pcb_tool.cpp.

References TOOL_INTERACTIVE::Activate(), KIGFX::PCB_VIEW::Add(), KIGFX::VIEW_GROUP::Add(), SELECTION::Add(), PCB_TOOL::board(), BUT_LEFT, BUT_RIGHT, KIGFX::VIEW_CONTROLS::CaptureCursor(), SELECTION::Clear(), PCB_TOOL::controls(), INTERACTIVE_PLACER_BASE::CreateItem(), dyn_cast(), PCB_ACTIONS::flip, PCB_TOOL::frame(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), TOOL_EVT_UTILS::GetEventRotationAngle(), TOOL_BASE::GetManager(), PCB_TOOL::IPO_FLIP, PCB_TOOL::IPO_PROPERTIES, PCB_TOOL::IPO_REPEAT, PCB_TOOL::IPO_ROTATE, PCB_TOOL::IPO_SINGLE_CLICK, TOOL_EVT_UTILS::IsCancelInteractive(), TOOL_EVT_UTILS::IsRotateToolEvt(), INTERACTIVE_PLACER_BASE::m_board, INTERACTIVE_PLACER_BASE::m_frame, PCB_TOOL::m_menu, INTERACTIVE_PLACER_BASE::m_modifiers, PCB_TOOL::module(), PCB_MODULE_T, INTERACTIVE_PLACER_BASE::PlaceItem(), BOARD_COMMIT::Push(), KIGFX::PCB_VIEW::Remove(), KIGFX::VIEW_GROUP::Remove(), SELECTION::Remove(), TOOL_MANAGER::RunAction(), MODULE::RunOnChildren(), PCB_ACTIONS::selectionClear, KIGFX::VIEW_CONTROLS::SetAutoPan(), KIGFX::VIEW_CONTROLS::SetSnapping(), TOOL_MENU::ShowContextMenu(), KIGFX::VIEW_CONTROLS::ShowCursor(), INTERACTIVE_PLACER_BASE::SnapItem(), TC_COMMAND, KIGFX::PCB_VIEW::Update(), PCB_TOOL::view(), TOOL_INTERACTIVE::Wait(), VECTOR2< T >::x, and VECTOR2< T >::y.

Referenced by MICROWAVE_TOOL::addMicrowaveFootprint(), DRAWING_TOOL::DrawVia(), and MODULE_EDITOR_TOOLS::PlacePad().

42 {
43  using namespace std::placeholders;
44  std::unique_ptr<BOARD_ITEM> newItem;
45 
46  Activate();
47 
48  BOARD_COMMIT commit( frame() );
49 
51 
52  // do not capture or auto-pan until we start placing an item
53  controls()->ShowCursor( true );
54  controls()->SetSnapping( true );
55 
56  // Add a VIEW_GROUP that serves as a preview for the new item
57  SELECTION preview;
58  view()->Add( &preview );
59 
60  aPlacer->m_board = board();
61  aPlacer->m_frame = frame();
62  aPlacer->m_modifiers = 0;
63 
64  if( aOptions & IPO_SINGLE_CLICK && !( aOptions & IPO_PROPERTIES ) )
65  {
66  VECTOR2I cursorPos = controls()->GetCursorPosition();
67 
68  newItem = aPlacer->CreateItem();
69 
70  if( newItem )
71  {
72  newItem->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
73  preview.Add( newItem.get() );
74  }
75  }
76 
77  // Main loop: keep receiving events
78  while( OPT_TOOL_EVENT evt = Wait() )
79  {
80  VECTOR2I cursorPos = controls()->GetCursorPosition();
81  aPlacer->m_modifiers = evt->Modifier();
82 
84  {
85  if( newItem )
86  {
87  // Delete the old item and have another try
88  newItem = nullptr;
89 
90  preview.Clear();
91 
92  if( aOptions & IPO_SINGLE_CLICK )
93  break;
94 
95  controls()->SetAutoPan( false );
96  controls()->CaptureCursor( false );
97  controls()->ShowCursor( true );
98  }
99  else
100  {
101  break;
102  }
103 
104  if( evt->IsActivate() ) // now finish unconditionally
105  break;
106  }
107  else if( evt->IsClick( BUT_LEFT ) )
108  {
109  if( !newItem )
110  {
111  // create the item if possible
112  newItem = aPlacer->CreateItem();
113 
114  // no item created, so wait for another click
115  if( !newItem )
116  continue;
117 
118  controls()->CaptureCursor( true );
119  controls()->SetAutoPan( true );
120 
121  newItem->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
122 
123  preview.Add( newItem.get() );
124 
125  if( newItem->Type() == PCB_MODULE_T )
126  {
127  auto module = dyn_cast<MODULE*>( newItem.get() );
128 
129  // modules have more drawable parts
130  module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
131  }
132  }
133  else
134  {
135  newItem->ClearFlags();
136  preview.Remove( newItem.get() );
137 
138  aPlacer->PlaceItem( newItem.get(), commit );
139 
140  if( newItem->Type() == PCB_MODULE_T )
141  {
142  auto module = dyn_cast<MODULE*>( newItem.get() );
143  module->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Remove, &preview, _1 ) );
144  }
145 
146  newItem.release();
147  commit.Push( aCommitMessage );
148 
149  controls()->CaptureCursor( false );
150  controls()->SetAutoPan( false );
151  controls()->ShowCursor( true );
152 
153  if( !( aOptions & IPO_REPEAT ) )
154  break;
155 
156  if( aOptions & IPO_SINGLE_CLICK && !( aOptions & IPO_PROPERTIES ) )
157  {
159 
160  newItem = aPlacer->CreateItem();
161 
162  if( newItem )
163  {
164  newItem->SetPosition( wxPoint( pos.x, pos.y ) );
165  preview.Add( newItem.get() );
166  }
167  }
168  }
169  }
170  else if( evt->IsClick( BUT_RIGHT ) )
171  {
173  }
174  else if( newItem && evt->Category() == TC_COMMAND )
175  {
176  /*
177  * Handle any events that can affect the item as we move
178  * it around, eg rotate and flip
179  */
180 
181  if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) && ( aOptions & IPO_ROTATE ) )
182  {
183  const int rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle( *frame(), *evt );
184  newItem->Rotate( newItem->GetPosition(), rotationAngle );
185  view()->Update( &preview );
186  }
187  else if( evt->IsAction( &PCB_ACTIONS::flip ) && ( aOptions & IPO_FLIP ) )
188  {
189  newItem->Flip( newItem->GetPosition() );
190  view()->Update( &preview );
191  }
192  }
193 
194  else if( newItem && evt->IsMotion() )
195  {
196  // track the cursor
197  newItem->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) );
198  aPlacer->SnapItem( newItem.get() );
199 
200  // Show a preview of the item
201  view()->Update( &preview );
202  }
203  }
204 
205  view()->Remove( &preview );
206 }
static TOOL_ACTION selectionClear
Clears the current selection.
Definition: pcb_actions.h:53
virtual void ShowCursor(bool aEnabled)
Function ShowCursor() Enables or disables display of cursor.
virtual void PlaceItem(BOARD_ITEM *aItem, BOARD_COMMIT &aCommit)
Definition: pcb_tool.cpp:265
virtual void Clear() override
Function Clear() Removes all the stored items from the group.
Definition: selection.h:90
void RunOnChildren(const std::function< void(BOARD_ITEM *)> &aFunction)
Function RunOnChildren.
TOOL_MENU m_menu
Menu model displayed by the tool.
Definition: pcb_tool.h:148
virtual void Update(VIEW_ITEM *aItem, int aUpdateFlags) override
For dynamic VIEWs, informs the associated VIEW that the graphical representation of this item has cha...
Definition: pcb_view.cpp:81
virtual std::unique_ptr< BOARD_ITEM > CreateItem()=0
OPT_TOOL_EVENT Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Function Wait()
virtual void SetSnapping(bool aEnabled)
Function SetSnapping() Enables/disables snapping cursor to grid.
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Function RunAction() Runs the specified action.
Definition: tool_manager.h:125
PCB_EDIT_FRAME * m_frame
Definition: pcb_tool.h:58
bool IsRotateToolEvt(const TOOL_EVENT &aEvt)
Function isRotateToolEvt()
Casted dyn_cast(From aObject)
Function dyn_cast()
Definition: typeinfo.h:61
virtual void Remove(VIEW_ITEM *aItem) override
Function Remove() Removes a VIEW_ITEM from the view.
Definition: pcb_view.cpp:64
virtual void Add(EDA_ITEM *aItem)
Definition: selection.h:74
virtual void SnapItem(BOARD_ITEM *aItem)
Definition: pcb_tool.cpp:260
KIGFX::VIEW_CONTROLS * controls() const
Definition: pcb_tool.h:138
class MODULE, a footprint
Definition: typeinfo.h:89
virtual void CaptureCursor(bool aEnabled)
Function CaptureCursor() Forces the cursor to stay within the drawing panel area. ...
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
MODULE * module() const
Definition: pcb_tool.h:141
virtual void Remove(VIEW_ITEM *aItem)
Function Remove() Removes an item from the group.
Definition: view_group.cpp:61
bool IsCancelInteractive(const TOOL_EVENT &aEvt)
Function IsCancelInteractive()
virtual void Add(VIEW_ITEM *aItem)
Function Add() Adds an item to the group.
Definition: view_group.cpp:55
virtual void SetAutoPan(bool aEnabled)
Function SetAutoPan Turns on/off auto panning (this feature is used when there is a tool active (eg...
static TOOL_ACTION flip
Flipping of selected objects.
Definition: pcb_actions.h:105
KIGFX::PCB_VIEW * view() const
Definition: pcb_tool.h:137
TOOL_MANAGER * GetManager() const
Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool...
Definition: tool_base.h:144
void Activate()
Function Activate() Runs the tool.
virtual void Add(VIEW_ITEM *aItem, int aDrawPriority=-1) override
Function Add() Adds a VIEW_ITEM to the view.
Definition: pcb_view.cpp:48
int GetEventRotationAngle(const PCB_BASE_EDIT_FRAME &aFrame, const TOOL_EVENT &aEvt)
Function getEventRotationAngle()
void ShowContextMenu(SELECTION &aSelection)
Function ShowContextMenu.
Definition: tool_menu.cpp:62
OPT< TOOL_EVENT > OPT_TOOL_EVENT
Definition: tool_event.h:495
BOARD * board() const
Definition: pcb_tool.h:140
virtual void Remove(EDA_ITEM *aItem)
Definition: selection.h:82
bool PCB_TOOL::EditingModules ( ) const
inlineinherited
const TOOL_EVENT TOOL_INTERACTIVE::evActivate ( std::string  aToolName = "")
protectedinherited

functions below are not yet implemented - their interface may change

const TOOL_EVENT TOOL_INTERACTIVE::evButtonDown ( int  aButton = BUT_ANY)
protectedinherited
const TOOL_EVENT TOOL_INTERACTIVE::evButtonUp ( int  aButton = BUT_ANY)
protectedinherited
const TOOL_EVENT TOOL_INTERACTIVE::evClick ( int  aButton = BUT_ANY)
protectedinherited
const TOOL_EVENT TOOL_INTERACTIVE::evCommand ( int  aCommandId = -1)
protectedinherited
const TOOL_EVENT TOOL_INTERACTIVE::evCommand ( std::string  aCommandStr = "")
protectedinherited
const TOOL_EVENT TOOL_INTERACTIVE::evDrag ( int  aButton = BUT_ANY)
protectedinherited
const TOOL_EVENT TOOL_INTERACTIVE::evMotion ( )
protectedinherited
PCB_EDIT_FRAME* PCB_TOOL::frame ( ) const
inlineprotectedinherited

Definition at line 139 of file pcb_tool.h.

Referenced by POINT_EDITOR::addCorner(), MICROWAVE_TOOL::addMicrowaveFootprint(), AUTOPLACE_TOOL::autoplace(), PCB_TOOL::canvas(), EDIT_TOOL::changeTrackWidthOnClick(), PNS::TOOL_BASE::checkSnap(), PCB_EDITOR_CONTROL::ClearHighlight(), PAD_TOOL::copyPadSettings(), MICROWAVE_TOOL::createInductorBetween(), MODULE_EDITOR_TOOLS::CreatePadFromShapes(), ROUTER_TOOL::CustomTrackWidthDialog(), PCB_TOOL::displayOptions(), EDIT_TOOL::doCopyToClipboard(), PCB_TOOL::doInteractiveItemPlacement(), ROUTER_TOOL::DpDimensionsDialog(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::drawZone(), MODULE_EDITOR_TOOLS::EnumeratePads(), EDIT_TOOL::ExchangeFootprints(), MODULE_EDITOR_TOOLS::ExplodePadToShapes(), ROUTER_TOOL::finishInteractive(), getMicrowaveItemCreator(), highlightNet(), PAD_TOOL::Init(), EDIT_TOOL::Init(), SELECTION_TOOL::Init(), ROUTER_TOOL::InlineDrag(), PICKER_TOOL::Main(), EDIT_TOOL::Main(), mainLoop(), ROUTER_TOOL::mainLoop(), meanderSettingsDialog(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::onViaCommand(), PCBNEW_CONTROL::PasteItemsFromClipboard(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), performTuning(), EDIT_TOOL::pickCopyReferencePoint(), MODULE_EDITOR_TOOLS::PlacePad(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), PAD_TOOL::pushPadSettings(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), POINT_EDITOR::removeCorner(), PNS::TOOL_BASE::Reset(), ROUTER_TOOL::RouteDiffPair(), ROUTER_TOOL::RouteSingleTrace(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ROUTER_TOOL::SettingsDialog(), ROUTER_TOOL::switchLayerOnViaPlacement(), TuneDiffPair(), TuneDiffPairSkew(), TuneSingleTrace(), POINT_EDITOR::updateItem(), ZONE_FILLER_TOOL::ZoneFill(), and ZONE_FILLER_TOOL::ZoneFillAll().

139 { return getEditFrame<PCB_EDIT_FRAME>(); }
template<typename T >
T* TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Function getEditFrame()

Returns the application window object, casted to requested user type.

Definition at line 188 of file tool_base.h.

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), and TOOL_SETTINGS::getConfigBase().

189  {
190  return static_cast<T*>( getEditFrameInt() );
191  }
wxWindow * getEditFrameInt() const
Definition: tool_base.cpp:47
TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Function GetId() Returns the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 122 of file tool_base.h.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::saveViewControls().

123  {
124  return m_toolId;
125  }
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:210
TOOL_MANAGER* TOOL_BASE::GetManager ( ) const
inlineinherited

Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.

Returns
Instance of the TOOL_MANAGER. If there is no TOOL_MANAGER associated, it returns NULL.

Definition at line 144 of file tool_base.h.

Referenced by BOARD_COMMIT::BOARD_COMMIT(), ZONE_CREATE_HELPER::createNewZone(), PCB_TOOL::doInteractiveItemPlacement(), CONTEXT_MENU::getToolManager(), CONTEXT_MENU::onMenuEvent(), and ZONE_CREATE_HELPER::performZoneCutout().

145  {
146  return m_toolMgr;
147  }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
template<typename T >
T* TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Function getModel()

Returns the model object if it matches the requested type.

Definition at line 199 of file tool_base.h.

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), ZONE_CREATE_HELPER::createZoneFromExisting(), and ZONE_CREATE_HELPER::performZoneCutout().

200  {
201  EDA_ITEM* m = getModelInt();
202 
203  return static_cast<T*>( m );
204  }
Class EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boa...
Definition: base_struct.h:154
EDA_ITEM * getModelInt() const
Definition: tool_base.cpp:53
const std::string& TOOL_BASE::GetName ( void  ) const
inlineinherited

Function GetName() Returns the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 133 of file tool_base.h.

Referenced by TOOL_SETTINGS::getKeyName(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), and TOOL_MANAGER::RegisterTool().

134  {
135  return m_toolName;
136  }
std::string m_toolName
Name of the tool.
Definition: tool_base.h:214
TOOL_SETTINGS & TOOL_BASE::GetSettings ( )
inherited

Definition at line 77 of file tool_base.cpp.

Referenced by GERBVIEW_CONTROL::HighlightControl(), ROUTER_TOOL::Init(), and ROUTER_TOOL::~ROUTER_TOOL().

78 {
79  return m_toolSettings;
80 }
TOOL_SETTINGS m_toolSettings
Definition: tool_base.h:216
TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Function GetType() Returns the type of the tool.

Returns
The type of the tool.

Definition at line 111 of file tool_base.h.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), and TOOL_MANAGER::runTool().

112  {
113  return m_type;
114  }
TOOL_TYPE m_type
Stores the type of the tool.
Definition: tool_base.h:207
KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Function getView()

Returns the instance of VIEW object used in the application. It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 35 of file tool_base.cpp.

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), PCB_EDITOR_CONTROL::CrossProbeSchToPcb(), COMMON_TOOLS::CursorControl(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SELECTION_TOOL::doSelectionMenu(), MICROWAVE_TOOL::drawMicrowaveInductor(), PCB_EDITOR_CONTROL::DrillOrigin(), MODULE_EDITOR_TOOLS::EnumeratePads(), SELECTION_TOOL::findCallback(), ROUTER_TOOL::getStartLayer(), PCBNEW_CONTROL::GridResetOrigin(), PCBNEW_CONTROL::GridSetOrigin(), SELECTION_TOOL::guessSelectionCandidates(), SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), PNS::TOOL_BASE::highlightNet(), PCBNEW_CONTROL::LayerAlphaDec(), PCBNEW_CONTROL::LayerAlphaInc(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), PNS::TOOL_BASE::pickSingleItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), EDIT_TOOL::Remove(), PCB_EDITOR_CONTROL::Reset(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), DRAWING_TOOL::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), SELECTION_TOOL::Reset(), GERBVIEW_SELECTION_TOOL::select(), GERBVIEW_SELECTION_TOOL::selectable(), SELECTION_TOOL::selectable(), GERBVIEW_SELECTION_TOOL::selectionContains(), SELECTION_TOOL::selectionContains(), GERBVIEW_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), POINT_EDITOR::updateEditedPoint(), COMMON_TOOLS::updateGrid(), PCBNEW_CONTROL::updateGrid(), POINT_EDITOR::updatePoints(), SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), COMMON_TOOLS::ZoomFitScreen(), GERBVIEW_SELECTION_TOOL::zoomFitSelection(), SELECTION_TOOL::zoomFitSelection(), CVPCB_SELECTION_TOOL::~CVPCB_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and SELECTION_TOOL::~SELECTION_TOOL().

36 {
37  return m_toolMgr->GetView();
38 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:252
KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Function getViewControls()

Returns the instance of VIEW_CONTROLS object used in the application. It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.)

Returns
The instance of VIEW_CONTROLS.

Definition at line 41 of file tool_base.cpp.

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by POINT_EDITOR::addCorner(), COMMON_TOOLS::CursorControl(), COMMON_TOOLS::doZoomToPreset(), MICROWAVE_TOOL::drawMicrowaveInductor(), MODULE_EDITOR_TOOLS::EnumeratePads(), SELECTION_TOOL::findMove(), PCB_EDITOR_CONTROL::HighlightNet(), PCB_EDITOR_CONTROL::HighlightNetCursor(), PICKER_TOOL::Main(), CVPCB_SELECTION_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), EDIT_TOOL::Main(), ROUTER_TOOL::mainLoop(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), POINT_EDITOR::Reset(), DRAWING_TOOL::Reset(), CVPCB_CONTROL::ResetCoords(), GERBVIEW_CONTROL::ResetCoords(), PCBNEW_CONTROL::ResetCoords(), GERBVIEW_SELECTION_TOOL::selectCursor(), SELECTION_TOOL::selectCursor(), GERBVIEW_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), ZOOM_TOOL::selectRegion(), PICKER_TOOL::setControls(), POINT_EDITOR::setEditedPoint(), EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

42 {
43  return m_toolMgr->GetViewControls();
44 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:257
template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited
void TOOL_BASE::highlightNet ( bool  aEnabled,
int  aNetcode = -1 
)
protectedvirtualinherited

Definition at line 208 of file pns_tool_base.cpp.

References KIGFX::VIEW::GetPainter(), KIGFX::PAINTER::GetSettings(), TOOL_BASE::getView(), KIGFX::RENDER_SETTINGS::SetHighlight(), and KIGFX::VIEW::UpdateAllLayersColor().

Referenced by ROUTER_TOOL::finishInteractive(), ROUTER_TOOL::performDragging(), performTuning(), and ROUTER_TOOL::prepareInteractive().

209 {
211 
212  if( aNetcode >= 0 && aEnabled )
213  rs->SetHighlight( true, aNetcode );
214  else
215  rs->SetHighlight( false );
216 
218 }
Class RENDER_SETTINGS Contains all the knowledge about how graphical objects are drawn on any output ...
Definition: painter.h:56
PAINTER * GetPainter() const
Function GetPainter() Returns the painter object used by the view for drawing VIEW_ITEMS.
Definition: view.h:199
KIGFX::VIEW * getView() const
Function getView()
Definition: tool_base.cpp:35
virtual RENDER_SETTINGS * GetSettings()=0
Function GetSettings Returns pointer to current settings that are going to be used when drawing items...
void UpdateAllLayersColor()
Function UpdateAllLayersColor() Applies the new coloring scheme to all layers.
Definition: view.cpp:786
void SetHighlight(bool aEnabled, int aNetcode=-1)
Function SetHighlight Turns on/off highlighting - it may be done for the active layer or the specifie...
Definition: painter.h:140
bool PCB_TOOL::Init ( )
overridevirtualinherited

Function Init() Init() is called once upon a registration of the tool.

Returns
True if the initialization went fine, false - otherwise.

Reimplemented from TOOL_BASE.

Reimplemented in SELECTION_TOOL, EDIT_TOOL, DRAWING_TOOL, POSITION_RELATIVE_TOOL, PCB_EDITOR_CONTROL, POINT_EDITOR, PAD_TOOL, and ROUTER_TOOL.

Definition at line 208 of file pcb_tool.cpp.

References CONDITIONAL_MENU::AddItem(), TOOL_MENU::AddStandardSubMenus(), ACTIONS::cancelInteractive, TOOL_MENU::GetMenu(), PCB_TOOL::m_menu, and SELECTION_CONDITIONS::ShowAlways().

209 {
210  // A basic context manu. Many (but not all) tools will choose to override this.
211 
212  auto& ctxMenu = m_menu.GetMenu();
213 
214  // cancel current tool goes in main context menu at the top if present
216  ctxMenu.AddSeparator( SELECTION_CONDITIONS::ShowAlways, 1 );
217 
218  // Finally, add the standard zoom/grid items
219  m_menu.AddStandardSubMenus( *getEditFrame<PCB_BASE_FRAME>() );
220 
221  return true;
222 }
static bool ShowAlways(const SELECTION &aSelection)
Function ShowAlways The default condition function (always returns true).
TOOL_MENU m_menu
Menu model displayed by the tool.
Definition: pcb_tool.h:148
CONDITIONAL_MENU & GetMenu()
Function GetMenu.
Definition: tool_menu.cpp:49
static TOOL_ACTION cancelInteractive
Definition: actions.h:45
void AddStandardSubMenus(EDA_DRAW_FRAME &aFrame)
Function CreateBasicMenu.
Definition: tool_menu.cpp:95
void AddItem(const TOOL_ACTION &aAction, const SELECTION_CONDITION &aCondition=SELECTION_CONDITIONS::ShowAlways, int aOrder=ANY_ORDER)
Function AddItem()
bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 30 of file tool_base.cpp.

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

31 {
32  return m_toolMgr->IsToolActive( m_toolId );
33 }
bool IsToolActive(TOOL_ID aId) const
Function IsToolActive() Returns true if a tool with given id is active (executing) ...
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:210
int LENGTH_TUNER_TOOL::mainLoop ( PNS::ROUTER_MODE  aMode)
private

Definition at line 262 of file length_tuner_tool.cpp.

References ACT_Settings, ACT_StartTuning, TOOL_INTERACTIVE::Activate(), BUT_LEFT, PCB_TOOL::controls(), dummy(), PCB_TOOL::frame(), TOOL_EVT_UTILS::IsCancelInteractive(), PNS::TOOL_BASE::m_router, PNS::TOOL_BASE::m_savedSettings, PNS::TOOL_BASE::m_savedSizes, TOOL_BASE::m_toolMgr, meanderSettingsDialog(), performTuning(), TOOL_MANAGER::RunAction(), PCB_ACTIONS::selectionClear, TOOL_INTERACTIVE::SetContextMenu(), PNS::ROUTER::SetMode(), EDA_DRAW_FRAME::SetNoToolSelected(), KIGFX::VIEW_CONTROLS::SetSnapping(), PNS::ROUTER::Settings(), KIGFX::VIEW_CONTROLS::ShowCursor(), PNS::ROUTER::Sizes(), PCB_BASE_EDIT_FRAME::UndoRedoBlock(), PNS::TOOL_BASE::updateStartItem(), and TOOL_INTERACTIVE::Wait().

Referenced by TuneDiffPair(), TuneDiffPairSkew(), and TuneSingleTrace().

263 {
264  // Deselect all items
266 
267  Activate();
268 
269  m_router->SetMode( aMode );
270 
271  controls()->SetSnapping( true );
272  controls()->ShowCursor( true );
273  frame()->UndoRedoBlock( true );
274 
275  std::unique_ptr<TUNER_TOOL_MENU> ctxMenu( new TUNER_TOOL_MENU );
276  SetContextMenu( ctxMenu.get() );
277 
278  // Main loop: keep receiving events
279  while( OPT_TOOL_EVENT evt = Wait() )
280  {
281  if( evt->IsCancel() || evt->IsActivate() || TOOL_EVT_UTILS::IsCancelInteractive( *evt ) )
282  {
283  break; // Finish
284  }
285  else if( evt->IsMotion() )
286  {
287  updateStartItem( *evt );
288  }
289  else if( evt->IsClick( BUT_LEFT ) || evt->IsAction( &ACT_StartTuning ) )
290  {
291  updateStartItem( *evt );
292  performTuning();
293  }
294  else if( evt->IsAction( &ACT_Settings ) )
295  {
297  meanderSettingsDialog( dummy );
298  }
299  }
300 
302  frame()->UndoRedoBlock( false );
303 
304  // Store routing settings till the next invocation
307 
308  return 0;
309 }
static TOOL_ACTION selectionClear
Clears the current selection.
Definition: pcb_actions.h:53
virtual void ShowCursor(bool aEnabled)
Function ShowCursor() Enables or disables display of cursor.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
SIZES_SETTINGS m_savedSizes
Stores sizes settings between router invocations.
Definition: pns_tool_base.h:67
OPT_TOOL_EVENT Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Function Wait()
virtual void SetSnapping(bool aEnabled)
Function SetSnapping() Enables/disables snapping cursor to grid.
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Function RunAction() Runs the specified action.
Definition: tool_manager.h:125
static TOOL_ACTION ACT_Settings("pcbnew.LengthTuner.Settings", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ROUTE_TUNE_SETTINGS), _("Length Tuning Settings..."), _("Sets the length tuning parameters for currently routed item."), router_len_tuner_setup_xpm)
void UndoRedoBlock(bool aBlock=true)
Function UndoRedoBlock Enables/disable undo and redo operations.
SIZES_SETTINGS & Sizes()
Definition: pns_router.h:206
int meanderSettingsDialog(const TOOL_EVENT &aEvent)
virtual void updateStartItem(const TOOL_EVENT &aEvent, bool aIgnorePads=false)
KIGFX::VIEW_CONTROLS * controls() const
Definition: pcb_tool.h:138
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
Class TOOL_EVENT.
Definition: tool_event.h:168
ROUTER * m_router
Definition: pns_tool_base.h:77
void SetContextMenu(CONTEXT_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
Function SetContextMenu()
ROUTING_SETTINGS m_savedSettings
Stores routing settings between router invocations.
Definition: pns_tool_base.h:66
bool IsCancelInteractive(const TOOL_EVENT &aEvt)
Function IsCancelInteractive()
virtual void SetNoToolSelected()
Select the ID_NO_TOOL_SELECTED id tool (Idle tool)
static TOOL_ACTION ACT_StartTuning("pcbnew.LengthTuner.StartTuning", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ADD_NEW_TRACK), _("New Track"), _("Starts laying a new track."))
void SetMode(ROUTER_MODE aMode)
Definition: pns_router.cpp:510
static LIB_PART * dummy()
Used when a LIB_PART is not found in library to draw a dummy shape This component is a 400 mils squar...
void Activate()
Function Activate() Runs the tool.
ROUTING_SETTINGS & Settings()
Definition: pns_router.h:187
OPT< TOOL_EVENT > OPT_TOOL_EVENT
Definition: tool_event.h:495
int LENGTH_TUNER_TOOL::meanderSettingsDialog ( const TOOL_EVENT aEvent)
private

Definition at line 311 of file length_tuner_tool.cpp.

References PCB_TOOL::frame(), PNS::TOOL_BASE::m_router, m_savedMeanderSettings, PNS::MEANDER_PLACER_BASE::MeanderSettings(), PNS::ROUTER::Mode(), PNS::ROUTER::Placer(), and PNS::MEANDER_PLACER_BASE::UpdateSettings().

Referenced by mainLoop(), and performTuning().

312 {
314 
315  PNS::MEANDER_SETTINGS settings = placer ? placer->MeanderSettings() : m_savedMeanderSettings;
316  DIALOG_PNS_LENGTH_TUNING_SETTINGS settingsDlg( frame(), settings, m_router->Mode() );
317 
318  if( settingsDlg.ShowModal() )
319  {
320  if( placer )
321  placer->UpdateSettings( settings );
322 
323  m_savedMeanderSettings = settings;
324  }
325 
326  return 0;
327 }
Class MEANDER_PLACER_BASE.
PLACEMENT_ALGO * Placer()
Definition: pns_router.h:216
Class MEANDER_SETTINGS.
Definition: pns_meander.h:57
virtual void UpdateSettings(const MEANDER_SETTINGS &aSettings)
PNS::MEANDER_SETTINGS m_savedMeanderSettings
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
ROUTER * m_router
Definition: pns_tool_base.h:77
ROUTER_MODE Mode() const
Definition: pns_router.h:124
virtual const MEANDER_SETTINGS & MeanderSettings() const
Function MeanderSettings()
void LENGTH_TUNER_TOOL::performTuning ( )
private

Definition at line 141 of file length_tuner_tool.cpp.

References ACT_AmplDecrease, ACT_AmplIncrease, ACT_EndTuning, ACT_Settings, ACT_SpacingDecrease, ACT_SpacingIncrease, BUT_LEFT, PCB_TOOL::controls(), dummy(), PNS::ROUTER::FailureReason(), PNS::ROUTER::FixRoute(), KIGFX::VIEW_CONTROLS::ForceCursorPosition(), PCB_TOOL::frame(), PNS::TOOL_BASE::highlightNet(), TOOL_EVT_UTILS::IsCancelInteractive(), PNS::ITEM::Layers(), PNS::TOOL_BASE::m_router, m_savedMeanderSettings, PNS::TOOL_BASE::m_startItem, PNS::TOOL_BASE::m_startSnapPoint, meanderSettingsDialog(), PNS::ROUTER::Move(), PNS::ITEM::Net(), PNS::ROUTER::Placer(), STATUS_POPUP::Popup(), PCB_EDIT_FRAME::SetActiveLayer(), KIGFX::VIEW_CONTROLS::SetAutoPan(), LAYER_RANGE::Start(), PNS::ROUTER::StartRouting(), PNS::ROUTER::StopRouting(), ToLAYER_ID(), PNS::MEANDER_PLACER_BASE::UpdateSettings(), updateStatusPopup(), and TOOL_INTERACTIVE::Wait().

Referenced by mainLoop().

142 {
143  if( m_startItem )
144  {
146 
147  if( m_startItem->Net() >= 0 )
148  highlightNet( true, m_startItem->Net() );
149  }
150 
151  controls()->ForceCursorPosition( false );
152  controls()->SetAutoPan( true );
153 
155  {
156  wxMessageBox( m_router->FailureReason(), _( "Error" ) );
157  highlightNet( false );
158  return;
159  }
160 
161  auto placer = static_cast<PNS::MEANDER_PLACER_BASE*>( m_router->Placer() );
162 
164 
165  VECTOR2I end( m_startSnapPoint );
166 
167  PNS_TUNE_STATUS_POPUP statusPopup( frame() );
168  statusPopup.Popup();
169 
170  m_router->Move( end, NULL );
171  updateStatusPopup( statusPopup );
172 
173  while( OPT_TOOL_EVENT evt = Wait() )
174  {
175  if( evt->IsCancel() || evt->IsActivate() || TOOL_EVT_UTILS::IsCancelInteractive( *evt ) )
176  break;
177  else if( evt->IsMotion() )
178  {
179  end = evt->Position();
180  m_router->Move( end, NULL );
181  updateStatusPopup( statusPopup );
182  }
183  else if( evt->IsClick( BUT_LEFT ) )
184  {
185  if( m_router->FixRoute( evt->Position(), NULL ) )
186  break;
187  }
188  else if( evt->IsAction( &ACT_EndTuning ) )
189  {
190  if( m_router->FixRoute( end, NULL ) )
191  break;
192  }
193  else if( evt->IsAction( &ACT_AmplDecrease ) )
194  {
195  placer->AmplitudeStep( -1 );
196  m_router->Move( end, NULL );
197  updateStatusPopup( statusPopup );
198  }
199  else if( evt->IsAction( &ACT_AmplIncrease ) )
200  {
201  placer->AmplitudeStep( 1 );
202  m_router->Move( end, NULL );
203  updateStatusPopup( statusPopup );
204  }
205  else if(evt->IsAction( &ACT_SpacingDecrease ) )
206  {
207  placer->SpacingStep( -1 );
208  m_router->Move( end, NULL );
209  updateStatusPopup( statusPopup );
210  }
211  else if( evt->IsAction( &ACT_SpacingIncrease ) )
212  {
213  placer->SpacingStep( 1 );
214  m_router->Move( end, NULL );
215  updateStatusPopup( statusPopup );
216  }
217  else if( evt->IsAction( &ACT_Settings ) )
218  {
219  statusPopup.Hide();
221  meanderSettingsDialog( dummy );
222  statusPopup.Show();
223  }
224  }
225 
227  controls()->SetAutoPan( false );
228  controls()->ForceCursorPosition( false );
229  highlightNet( false );
230 }
Class MEANDER_PLACER_BASE.
static TOOL_ACTION ACT_AmplIncrease("pcbnew.LengthTuner.AmplIncrease", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ROUTE_TUNE_INCREASE_AMP), _("Increase Amplitude"), _("Increase meander amplitude by one step."), router_len_tuner_amplitude_incr_xpm)
static TOOL_ACTION ACT_SpacingIncrease("pcbnew.LengthTuner.SpacingIncrease", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ROUTE_TUNE_INCREASE_SPACING), _("Increase Spacing"), _("Increase meander spacing by one step."), router_len_tuner_dist_incr_xpm)
const LAYER_RANGE & Layers() const
Function Layers()
Definition: pns_item.h:209
const wxString & FailureReason() const
Definition: pns_router.h:214
VECTOR2I m_startSnapPoint
Definition: pns_tool_base.h:70
PLACEMENT_ALGO * Placer()
Definition: pns_router.h:216
OPT_TOOL_EVENT Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Function Wait()
static TOOL_ACTION ACT_Settings("pcbnew.LengthTuner.Settings", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ROUTE_TUNE_SETTINGS), _("Length Tuning Settings..."), _("Sets the length tuning parameters for currently routed item."), router_len_tuner_setup_xpm)
void updateStatusPopup(PNS_TUNE_STATUS_POPUP &aPopup)
virtual void UpdateSettings(const MEANDER_SETTINGS &aSettings)
int meanderSettingsDialog(const TOOL_EVENT &aEvent)
KIGFX::VIEW_CONTROLS * controls() const
Definition: pcb_tool.h:138
static TOOL_ACTION ACT_SpacingDecrease("pcbnew.LengthTuner.SpacingDecrease", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ROUTE_TUNE_DECREASE_SPACING), _("Decrease Spacing"), _("Decrease meander spacing by one step."), router_len_tuner_dist_decr_xpm)
PNS::MEANDER_SETTINGS m_savedMeanderSettings
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
Class TOOL_EVENT.
Definition: tool_event.h:168
ITEM * m_startItem
Definition: pns_tool_base.h:68
bool FixRoute(const VECTOR2I &aP, ITEM *aItem, bool aForceFinish=false)
Definition: pns_router.cpp:367
ROUTER * m_router
Definition: pns_tool_base.h:77
virtual void ForceCursorPosition(bool aEnabled, const VECTOR2D &aPosition=VECTOR2D(0, 0))
Function ForceCursorPosition() Places the cursor immediately at a given point.
int Start() const
Definition: pns_layerset.h:83
bool IsCancelInteractive(const TOOL_EVENT &aEvt)
Function IsCancelInteractive()
void Move(const VECTOR2I &aP, ITEM *aItem)
Definition: pns_router.cpp:228
bool StartRouting(const VECTOR2I &aP, ITEM *aItem, int aLayer)
Definition: pns_router.cpp:173
virtual void SetAutoPan(bool aEnabled)
Function SetAutoPan Turns on/off auto panning (this feature is used when there is a tool active (eg...
void StopRouting()
Definition: pns_router.cpp:392
virtual void highlightNet(bool aEnabled, int aNetcode=-1)
static TOOL_ACTION ACT_AmplDecrease("pcbnew.LengthTuner.AmplDecrease", AS_CONTEXT, TOOL_ACTION::LegacyHotKey(HK_ROUTE_TUNE_DECREASE_AMP), _("Decrease Amplitude"), _("Decrease meander amplitude by one step."), router_len_tuner_amplitude_decr_xpm)
static LIB_PART * dummy()
Used when a LIB_PART is not found in library to draw a dummy shape This component is a 400 mils squar...
static TOOL_ACTION ACT_EndTuning("pcbnew.LengthTuner.EndTuning", AS_CONTEXT, WXK_END, _("End Track"), _("Stops laying the current meander."))
int Net() const
Function Net()
Definition: pns_item.h:179
virtual void SetActiveLayer(PCB_LAYER_ID aLayer) override
Function SetActiveLayer will change the currently active layer to aLayer and also update the PCB_LAYE...
PCB_LAYER_ID ToLAYER_ID(int aLayer)
Definition: lset.cpp:810
OPT< TOOL_EVENT > OPT_TOOL_EVENT
Definition: tool_event.h:495
ITEM * TOOL_BASE::pickSingleItem ( const VECTOR2I aWhere,
int  aNet = -1,
int  aLayer = -1,
bool  aIgnorePads = false 
)
protectedvirtualinherited

Definition at line 112 of file pns_tool_base.cpp.

References PCB_TOOL::displayOptions(), dist, KIGFX::VIEW::GetTopLayer(), TOOL_BASE::getView(), i, IsCopperLayer(), PNS::ITEM_SET::Items(), PNS::ITEM::KindStr(), PNS::ITEM::Layers(), PCB_DISPLAY_OPTIONS::m_ContrastModeDisplay, PNS::TOOL_BASE::m_router, max, PNS::ROUTING_SETTINGS::Mode(), LAYER_RANGE::Overlaps(), PNS::ROUTER::QueryHoverItems(), PNS::RM_MarkObstacles, PNS::ROUTER::Settings(), PNS::ITEM::SOLID_T, LAYER_RANGE::Start(), and PNS::ITEM::VIA_T.

Referenced by PNS::TOOL_BASE::updateEndItem(), and PNS::TOOL_BASE::updateStartItem().

113 {
114  int tl = getView()->GetTopLayer();
115 
116  if( aLayer > 0 )
117  tl = aLayer;
118 
119  static const int candidateCount = 5;
120  ITEM* prioritized[candidateCount];
121  int dist[candidateCount];
122 
123  for( int i = 0; i < candidateCount; i++ )
124  {
125  prioritized[i] = 0;
127  }
128 
129  ITEM_SET candidates = m_router->QueryHoverItems( aWhere );
130 
131  for( ITEM* item : candidates.Items() )
132  {
133  if( !item->IsRoutable() )
134  continue;
135 
136  if( !IsCopperLayer( item->Layers().Start() ) )
137  continue;
138 
139  // fixme: this causes flicker with live loop removal...
140  //if( item->Parent() && !item->Parent()->ViewIsVisible() )
141  // continue;
142 
143  if( aNet <= 0 || item->Net() == aNet )
144  {
145  if( item->OfKind( ITEM::VIA_T | ITEM::SOLID_T ) )
146  {
147  if( item->OfKind( ITEM::SOLID_T ) && aIgnorePads )
148  continue;
149 
150  int itemDist = ( item->Shape()->Centre() - aWhere ).SquaredEuclideanNorm();
151 
152  if( !prioritized[2] || itemDist < dist[2] )
153  {
154  prioritized[2] = item;
155  dist[2] = itemDist;
156  }
157  if( item->Layers().Overlaps( tl ) && itemDist < dist[0] )
158  {
159  prioritized[0] = item;
160  dist[0] = itemDist;
161  }
162  }
163  else
164  {
165  if( !prioritized[3] )
166  prioritized[3] = item;
167  if( item->Layers().Overlaps( tl ) )
168  prioritized[1] = item;
169  }
170  }
171  // Allow unconnected items as last resort in RM_MarkObstacles mode
172  else if ( item->Net() == 0 && m_router->Settings().Mode() == RM_MarkObstacles )
173  {
174  if( item->OfKind( ITEM::SOLID_T ) && aIgnorePads )
175  continue;
176 
177  if( item->Layers().Overlaps( tl ) )
178  prioritized[4] = item;
179  }
180  }
181 
182  ITEM* rv = NULL;
183 
184  for( int i = 0; i < candidateCount; i++ )
185  {
186  ITEM* item = prioritized[i];
187 
189  if( item && !item->Layers().Overlaps( tl ) )
190  item = NULL;
191 
192  if( item && ( aLayer < 0 || item->Layers().Overlaps( aLayer ) ) )
193  {
194  rv = item;
195  break;
196  }
197  }
198 
199  if( rv )
200  {
201  wxLogTrace( "PNS", "%s, layer : %d, tl: %d", rv->KindStr().c_str(), rv->Layers().Start(), tl );
202  }
203 
204  return rv;
205 }
PNS_MODE Mode() const
Returns the routing mode.
virtual int GetTopLayer() const
Definition: view.cpp:839
static const int dist[10][10]
Definition: ar_matrix.cpp:320
const ITEM_SET QueryHoverItems(const VECTOR2I &aP)
Definition: pns_router.cpp:118
PCB_DISPLAY_OPTIONS * displayOptions() const
Definition: pcb_tool.cpp:235
ROUTER * m_router
Definition: pns_tool_base.h:77
KIGFX::VIEW * getView() const
Function getView()
Definition: tool_base.cpp:35
#define max(a, b)
Definition: auxiliary.h:86
size_t i
Definition: json11.cpp:597
bool IsCopperLayer(LAYER_NUM aLayerId)
Function IsCopperLayer tests whether a layer is a copper layer.
ROUTING_SETTINGS & Settings()
Definition: pns_router.h:187
void LENGTH_TUNER_TOOL::Reset ( RESET_REASON  aReason)
overridevirtual

Function Reset() Brings the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Reimplemented from PNS::TOOL_BASE.

Definition at line 122 of file length_tuner_tool.cpp.

References TOOL_BASE::Reset(), and TOOL_BASE::RUN.

123 {
124  if( aReason == RUN )
125  TOOL_BASE::Reset( aReason );
126 }
Tool is invoked after being inactive.
Definition: tool_base.h:82
virtual void Reset(RESET_REASON aReason)=0
Function Reset() Brings the tool to a known, initial state.
ROUTER * TOOL_BASE::Router ( ) const
inherited

Definition at line 361 of file pns_tool_base.cpp.

References PNS::TOOL_BASE::m_router.

Referenced by EDIT_TOOL::Remove().

362 {
363  return m_router;
364 }
ROUTER * m_router
Definition: pns_tool_base.h:77
int LENGTH_TUNER_TOOL::routerOptionsDialog ( const TOOL_EVENT aEvent)
private
void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Function RunMainStack()

Calls a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 85 of file tool_interactive.cpp.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

86 {
87  m_toolMgr->RunMainStack( this, std::move( aFunc ) );
88 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)
const SELECTION & PCB_TOOL::selection ( ) const
protectedinherited

Definition at line 245 of file pcb_tool.cpp.

References TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplaceSelected(), PCB_EDITOR_CONTROL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::CreateArray(), MODULE_EDITOR_TOOLS::CreatePadFromShapes(), PCB_EDITOR_CONTROL::CrossProbePcbToSch(), deleteItem(), EDIT_TOOL::doCopyToClipboard(), EDIT_TOOL::Duplicate(), EDIT_TOOL::editFootprintInFpEditor(), EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandSelectedConnection(), MODULE_EDITOR_TOOLS::ExplodePadToShapes(), SELECTION_TOOL::filterSelection(), EDIT_TOOL::Flip(), DRAWING_TOOL::getSourceZoneForAction(), highlightNet(), ROUTER_TOOL::InlineDrag(), EDIT_TOOL::Main(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), PAD_TOOL::pastePadProperties(), PCBNEW_CONTROL::placeBoardItems(), PCB_EDITOR_CONTROL::PlaceModule(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::PositionRelative(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EDIT_TOOL::Rotate(), ZONE_FILLER_TOOL::SegzoneDeleteFill(), SELECTION_TOOL::selectCopper(), PCB_TOOL::selection(), SELECTION_TOOL::selectNet(), showLocalRatsnest(), PCB_EDITOR_CONTROL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ZoneDuplicate(), ZONE_FILLER_TOOL::ZoneFill(), PCB_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfill().

246 {
247  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
248  const auto& selection = selTool->GetSelection();
249  return selection;
250 }
Class SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
const SELECTION & selection() const
Definition: pcb_tool.cpp:245
SELECTION & PCB_TOOL::selection ( )
protectedinherited

Definition at line 252 of file pcb_tool.cpp.

References TOOL_MANAGER::GetTool(), TOOL_BASE::m_toolMgr, and PCB_TOOL::selection().

253 {
254  auto selTool = m_toolMgr->GetTool<SELECTION_TOOL>();
255  auto& selection = selTool->GetSelection();
256  return selection;
257 }
Class SELECTION_TOOL.
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
const SELECTION & selection() const
Definition: pcb_tool.cpp:245
void TOOL_INTERACTIVE::SetContextMenu ( CONTEXT_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Function SetContextMenu()

Assigns a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 74 of file tool_interactive.cpp.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and CONTEXT_MENU::SetTool().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SELECTION_TOOL::doSelectionMenu(), mainLoop(), ROUTER_TOOL::mainLoop(), and TOOL_MENU::ShowContextMenu().

75 {
76  if( aMenu )
77  aMenu->SetTool( this );
78  else
79  aTrigger = CMENU_OFF;
80 
81  m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
82 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
void ScheduleContextMenu(TOOL_BASE *aTool, CONTEXT_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Sets behaviour of the tool&#39;s context popup menu.
void SetTool(TOOL_INTERACTIVE *aTool)
Function SetTool() Sets a tool that is the creator of the menu.
void PCB_TOOL::SetEditModules ( bool  aEnabled)
inlineinherited

Function SetEditModules()

Toggles edit module mode. When enabled, one may select parts of modules individually (graphics, pads, etc.), so they can be modified.

Parameters
aEnableddecides if the mode should be enabled.

Definition at line 97 of file pcb_tool.h.

98  {
99  m_editModules = aEnabled;
100  }
bool m_editModules
Definition: pcb_tool.h:150
void LENGTH_TUNER_TOOL::setTransitions ( )
overridevirtual

This method is meant to be overridden in order to specify handlers for events.

It is called every time tool is reset or finished.

Reimplemented from PCB_TOOL.

Definition at line 254 of file length_tuner_tool.cpp.

References TOOL_INTERACTIVE::Go(), PCB_ACTIONS::routerActivateTuneDiffPair, PCB_ACTIONS::routerActivateTuneDiffPairSkew, PCB_ACTIONS::routerActivateTuneSingleTrace, TuneDiffPair(), TuneDiffPairSkew(), and TuneSingleTrace().

255 {
259 }
int TuneSingleTrace(const TOOL_EVENT &aEvent)
static TOOL_ACTION routerActivateTuneSingleTrace
Activation of the Push and Shove router (tune single line mode)
Definition: pcb_actions.h:204
void Go(int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
Function Go()
static TOOL_ACTION routerActivateTuneDiffPairSkew
Activation of the Push and Shove router (skew tuning mode)
Definition: pcb_actions.h:210
static TOOL_ACTION routerActivateTuneDiffPair
Activation of the Push and Shove router (diff pair tuning mode)
Definition: pcb_actions.h:207
int TuneDiffPairSkew(const TOOL_EVENT &aEvent)
int TuneDiffPair(const TOOL_EVENT &aEvent)
const VECTOR2I TOOL_BASE::snapToItem ( bool  aEnabled,
ITEM aItem,
VECTOR2I  aP 
)
protectedinherited

Definition at line 367 of file pns_tool_base.cpp.

References SEG::A, GRID_HELPER::Align(), GRID_HELPER::AlignToSegment(), SEG::B, PNS::ITEM::Kind(), PNS::TOOL_BASE::m_gridHelper, PNS::SEGMENT::Seg(), PNS::ITEM::SEGMENT_T, PNS::ITEM::SOLID_T, PNS::ITEM::VIA_T, and PNS::SEGMENT::Width().

Referenced by PNS::TOOL_BASE::updateEndItem(), and PNS::TOOL_BASE::updateStartItem().

368 {
369  VECTOR2I anchor;
370 
371  if( !aItem || !aEnabled )
372  {
373  return m_gridHelper->Align( aP );
374  }
375 
376  switch( aItem->Kind() )
377  {
378  case ITEM::SOLID_T:
379  anchor = static_cast<SOLID*>( aItem )->Pos();
380  break;
381 
382  case ITEM::VIA_T:
383  anchor = static_cast<VIA*>( aItem )->Pos();
384  break;
385 
386  case ITEM::SEGMENT_T:
387  {
388  SEGMENT* seg = static_cast<SEGMENT*>( aItem );
389  const SEG& s = seg->Seg();
390  int w = seg->Width();
391 
392 
393  if( ( aP - s.A ).EuclideanNorm() < w / 2 )
394  anchor = s.A;
395  else if( ( aP - s.B ).EuclideanNorm() < w / 2 )
396  anchor = s.B;
397  else
398  anchor = m_gridHelper->AlignToSegment( aP, s );
399 
400  break;
401  }
402 
403  default:
404  break;
405  }
406 
407  return anchor;
408 }
GRID_HELPER * m_gridHelper
Definition: pns_tool_base.h:75
VECTOR2I Align(const VECTOR2I &aPoint) const
VECTOR2I AlignToSegment(const VECTOR2I &aPoint, const SEG &aSeg)
Definition: seg.h:36
VECTOR2I A
Definition: seg.h:46
VECTOR2I B
Definition: seg.h:47
int LENGTH_TUNER_TOOL::TuneDiffPair ( const TOOL_EVENT aEvent)

Definition at line 240 of file length_tuner_tool.cpp.

References PCB_TOOL::frame(), ID_TRACK_BUTT, mainLoop(), PNS::PNS_MODE_TUNE_DIFF_PAIR, and PCB_BASE_FRAME::SetToolID().

Referenced by setTransitions().

241 {
242  frame()->SetToolID( ID_TRACK_BUTT, wxCURSOR_PENCIL, _( "Tune Diff Pair Length" ) );
244 }
virtual void SetToolID(int aId, int aCursor, const wxString &aToolMsg) override
Set the tool command ID to aId and sets the cursor to aCursor.
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
int mainLoop(PNS::ROUTER_MODE aMode)
int LENGTH_TUNER_TOOL::TuneDiffPairSkew ( const TOOL_EVENT aEvent)

Definition at line 247 of file length_tuner_tool.cpp.

References PCB_TOOL::frame(), ID_TRACK_BUTT, mainLoop(), PNS::PNS_MODE_TUNE_DIFF_PAIR_SKEW, and PCB_BASE_FRAME::SetToolID().

Referenced by setTransitions().

248 {
249  frame()->SetToolID( ID_TRACK_BUTT, wxCURSOR_PENCIL, _( "Tune Diff Pair Skew" ) );
251 }
virtual void SetToolID(int aId, int aCursor, const wxString &aToolMsg) override
Set the tool command ID to aId and sets the cursor to aCursor.
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
int mainLoop(PNS::ROUTER_MODE aMode)
int LENGTH_TUNER_TOOL::TuneSingleTrace ( const TOOL_EVENT aEvent)

Definition at line 233 of file length_tuner_tool.cpp.

References PCB_TOOL::frame(), ID_TRACK_BUTT, mainLoop(), PNS::PNS_MODE_TUNE_SINGLE, and PCB_BASE_FRAME::SetToolID().

Referenced by setTransitions().

234 {
235  frame()->SetToolID( ID_TRACK_BUTT, wxCURSOR_PENCIL, _( "Tune Trace Length" ) );
237 }
virtual void SetToolID(int aId, int aCursor, const wxString &aToolMsg) override
Set the tool command ID to aId and sets the cursor to aCursor.
PCB_EDIT_FRAME * frame() const
Definition: pcb_tool.h:139
int mainLoop(PNS::ROUTER_MODE aMode)
void TOOL_BASE::updateEndItem ( const TOOL_EVENT aEvent)
protectedvirtualinherited

Definition at line 282 of file pns_tool_base.cpp.

References PNS::TOOL_BASE::checkSnap(), PCB_TOOL::controls(), KIGFX::VIEW_CONTROLS::ForceCursorPosition(), PNS::ROUTER::GetCurrentLayer(), PNS::ROUTER::GetCurrentNets(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), KIGFX::VIEW_CONTROLS::GetMousePosition(), PNS::ROUTER::IsPlacingVia(), PNS::ITEM::KindStr(), PNS::ITEM::Layers(), PNS::TOOL_BASE::m_endItem, PNS::TOOL_BASE::m_endSnapPoint, PNS::TOOL_BASE::m_router, MD_SHIFT, PNS::ROUTING_SETTINGS::Mode(), TOOL_EVENT::Modifier(), PNS::TOOL_BASE::pickSingleItem(), PNS::RM_MarkObstacles, PNS::ROUTER::Settings(), PNS::TOOL_BASE::snapToItem(), and LAYER_RANGE::Start().

Referenced by ROUTER_TOOL::InlineDrag(), ROUTER_TOOL::onViaCommand(), ROUTER_TOOL::performDragging(), and ROUTER_TOOL::performRouting().

283 {
284  controls()->ForceCursorPosition( false );
285 
286  VECTOR2I mousePos = controls()->GetMousePosition();
287  VECTOR2I cursorPos = controls()->GetCursorPosition();
288 
289  int layer;
290  bool snapEnabled = !aEvent.Modifier( MD_SHIFT );
291 
292  if( m_router->Settings().Mode() != RM_MarkObstacles &&
293  ( m_router->GetCurrentNets().empty() || m_router->GetCurrentNets().front() < 0 ) )
294  {
295  m_endSnapPoint = snapToItem( snapEnabled, nullptr, mousePos );
297  m_endItem = nullptr;
298 
299  return;
300  }
301 
302  if( m_router->IsPlacingVia() )
303  layer = -1;
304  else
305  layer = m_router->GetCurrentLayer();
306 
307  ITEM* endItem = nullptr;
308 
309  std::vector<int> nets = m_router->GetCurrentNets();
310 
311  for( int net : nets )
312  {
313  endItem = pickSingleItem( mousePos, net, layer );
314 
315  if( endItem )
316  break;
317  }
318 
319  if( checkSnap( endItem ) )
320  {
321  VECTOR2I p = snapToItem( snapEnabled, endItem, mousePos );
322  controls()->ForceCursorPosition( true, p );
323  m_endItem = endItem;
324  m_endSnapPoint = p;
325  } else {
326  m_endItem = nullptr;
327  m_endSnapPoint = cursorPos;
328  }
329 
330  if( m_endItem )
331  {
332  wxLogTrace( "PNS", "%s, layer : %d", m_endItem->KindStr().c_str(), m_endItem->Layers().Start() );
333  }
334 }
PNS_MODE Mode() const
Returns the routing mode.
virtual VECTOR2D GetMousePosition(bool aWorldCoordinates=true) const =0
Function GetMousePosition() Returns the current mouse pointer position.
const LAYER_RANGE & Layers() const
Function Layers()
Definition: pns_item.h:209
int Modifier(int aMask=MD_MODIFIER_MASK) const
Returns information about key modifiers state (Ctrl, Alt, etc.)
Definition: tool_event.h:325
bool IsPlacingVia() const
Definition: pns_router.cpp:492
const std::vector< int > GetCurrentNets() const
Definition: pns_router.cpp:452
const VECTOR2I snapToItem(bool aEnabled, ITEM *aItem, VECTOR2I aP)
virtual ITEM * pickSingleItem(const VECTOR2I &aWhere, int aNet=-1, int aLayer=-1, bool aIgnorePads=false)
KIGFX::VIEW_CONTROLS * controls() const
Definition: pcb_tool.h:138
bool checkSnap(ITEM *aItem)
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.
ROUTER * m_router
Definition: pns_tool_base.h:77
virtual void ForceCursorPosition(bool aEnabled, const VECTOR2D &aPosition=VECTOR2D(0, 0))
Function ForceCursorPosition() Places the cursor immediately at a given point.
int Start() const
Definition: pns_layerset.h:83
VECTOR2I m_endSnapPoint
Definition: pns_tool_base.h:73
int GetCurrentLayer() const
Definition: pns_router.cpp:461
ROUTING_SETTINGS & Settings()
Definition: pns_router.h:187
const std::string KindStr() const
Function KindStr()
Definition: pns_item.cpp:63
void TOOL_BASE::updateStartItem ( const TOOL_EVENT aEvent,
bool  aIgnorePads = false 
)
protectedvirtualinherited

Definition at line 248 of file pns_tool_base.cpp.

References PNS::TOOL_BASE::checkSnap(), PCB_TOOL::controls(), KIGFX::VIEW_CONTROLS::ForceCursorPosition(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), KIGFX::VIEW::GetTopLayer(), TOOL_BASE::getView(), TOOL_EVENT::IsClick(), TOOL_EVENT::IsMotion(), PNS::ITEM::Layers(), PNS::TOOL_BASE::m_startItem, PNS::TOOL_BASE::m_startSnapPoint, MD_SHIFT, TOOL_EVENT::Modifier(), LAYER_RANGE::Overlaps(), PNS::TOOL_BASE::pickSingleItem(), TOOL_EVENT::Position(), and PNS::TOOL_BASE::snapToItem().

Referenced by mainLoop(), ROUTER_TOOL::mainLoop(), and ROUTER_TOOL::onViaCommand().

249 {
250  int tl = getView()->GetTopLayer();
252  VECTOR2I p;
253 
254  controls()->ForceCursorPosition( false );
255 
256  bool snapEnabled = true;
257 
258  if( aEvent.IsMotion() || aEvent.IsClick() )
259  {
260  snapEnabled = !aEvent.Modifier( MD_SHIFT );
261  p = aEvent.Position();
262  }
263  else
264  {
265  p = cp;
266  }
267 
268  m_startItem = pickSingleItem( p, -1, -1, aIgnorePads );
269 
270  if( !snapEnabled && m_startItem && !m_startItem->Layers().Overlaps( tl ) )
271  m_startItem = nullptr;
272 
273  m_startSnapPoint = snapToItem( snapEnabled, m_startItem, p );
274 
275  if( checkSnap ( m_startItem ))
276  {
278  }
279 }
virtual int GetTopLayer() const
Definition: view.cpp:839
const LAYER_RANGE & Layers() const
Function Layers()
Definition: pns_item.h:209
bool IsMotion() const
Definition: tool_event.h:299
VECTOR2I m_startSnapPoint
Definition: pns_tool_base.h:70
const VECTOR2D Position() const
Returns mouse cursor position in world coordinates.
Definition: tool_event.h:259
int Modifier(int aMask=MD_MODIFIER_MASK) const
Returns information about key modifiers state (Ctrl, Alt, etc.)
Definition: tool_event.h:325
const VECTOR2I snapToItem(bool aEnabled, ITEM *aItem, VECTOR2I aP)
virtual ITEM * pickSingleItem(const VECTOR2I &aWhere, int aNet=-1, int aLayer=-1, bool aIgnorePads=false)
KIGFX::VIEW_CONTROLS * controls() const
Definition: pcb_tool.h:138
bool checkSnap(ITEM *aItem)
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.
ITEM * m_startItem
Definition: pns_tool_base.h:68
virtual void ForceCursorPosition(bool aEnabled, const VECTOR2D &aPosition=VECTOR2D(0, 0))
Function ForceCursorPosition() Places the cursor immediately at a given point.
bool Overlaps(const LAYER_RANGE &aOther) const
Definition: pns_layerset.h:68
KIGFX::VIEW * getView() const
Function getView()
Definition: tool_base.cpp:35
bool IsClick(int aButtonMask=BUT_ANY) const
Definition: tool_event.h:277
void LENGTH_TUNER_TOOL::updateStatusPopup ( PNS_TUNE_STATUS_POPUP aPopup)
private

Definition at line 129 of file length_tuner_tool.cpp.

References PNS::TOOL_BASE::m_router, STATUS_POPUP::Move(), PNS_TUNE_STATUS_POPUP::UpdateStatus(), wxPoint::x, and wxPoint::y.

Referenced by performTuning().

130 {
131  wxPoint p = wxGetMousePosition();
132 
133  p.x += 20;
134  p.y += 20;
135 
136  aPopup.UpdateStatus( m_router );
137  aPopup.Move( p );
138 }
ROUTER * m_router
Definition: pns_tool_base.h:77
void UpdateStatus(PNS::ROUTER *aRouter)
virtual void Move(const wxPoint &aWhere)
OPT_TOOL_EVENT TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Function Wait()

Suspends execution of the tool until an event specified in aEventList arrives. No parameters means waiting for any event.

Definition at line 55 of file tool_interactive.cpp.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by PCBNEW_CONTROL::DeleteItemCursor(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), PCB_TOOL::doInteractiveItemPlacement(), SELECTION_TOOL::doSelectionMenu(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::drawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), MODULE_EDITOR_TOOLS::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), PCB_EDITOR_CONTROL::HighlightNetCursor(), ROUTER_TOOL::InlineDrag(), ZOOM_TOOL::Main(), PICKER_TOOL::Main(), CVPCB_SELECTION_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), EDIT_TOOL::Main(), SELECTION_TOOL::Main(), mainLoop(), ROUTER_TOOL::mainLoop(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), performTuning(), EDIT_TOOL::pickCopyReferencePoint(), DRAWING_TOOL::PlaceDXF(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), GERBVIEW_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), and PCB_EDITOR_CONTROL::ShowLocalRatsnest().

56 {
57  return m_toolMgr->ScheduleWait( this, aEventList );
58 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
OPT< TOOL_EVENT > ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pauses execution of a given tool until one or more events matching aConditions arrives.

Member Data Documentation

GRID_HELPER* PNS::TOOL_BASE::m_gridHelper
protectedinherited
PNS_KICAD_IFACE* PNS::TOOL_BASE::m_iface
protectedinherited
MSG_PANEL_ITEMS PNS::TOOL_BASE::m_panelItems
protectedinherited

Definition at line 64 of file pns_tool_base.h.

PNS::MEANDER_SETTINGS LENGTH_TUNER_TOOL::m_savedMeanderSettings
private

Definition at line 53 of file length_tuner_tool.h.

Referenced by meanderSettingsDialog(), and performTuning().

ROUTING_SETTINGS PNS::TOOL_BASE::m_savedSettings
protectedinherited

Stores routing settings between router invocations.

Definition at line 66 of file pns_tool_base.h.

Referenced by ROUTER_TOOL::Init(), mainLoop(), ROUTER_TOOL::mainLoop(), PNS::TOOL_BASE::Reset(), ROUTER_TOOL::SettingsDialog(), and ROUTER_TOOL::~ROUTER_TOOL().

SIZES_SETTINGS PNS::TOOL_BASE::m_savedSizes
protectedinherited

Stores sizes settings between router invocations.

Definition at line 67 of file pns_tool_base.h.

Referenced by ROUTER_TOOL::DpDimensionsDialog(), mainLoop(), ROUTER_TOOL::mainLoop(), and PNS::TOOL_BASE::Reset().

int PNS::TOOL_BASE::m_startLayer
protectedinherited

Definition at line 69 of file pns_tool_base.h.

Referenced by PNS::TOOL_BASE::TOOL_BASE().

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 210 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), and TOOL_BASE::IsToolActive().

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 215 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::attachManager(), PCB_EDITOR_CONTROL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), PCB_EDITOR_CONTROL::ClearHighlight(), GERBVIEW_SELECTION_TOOL::clearSelection(), SELECTION_TOOL::clearSelection(), PAD_TOOL::copyPadSettings(), MODULE_EDITOR_TOOLS::CreatePadFromShapes(), PCB_EDITOR_CONTROL::CrossProbePcbToSch(), PCB_EDITOR_CONTROL::CrossProbeSchToPcb(), COMMON_TOOLS::CursorControl(), ROUTER_TOOL::CustomTrackWidthDialog(), PCBNEW_CONTROL::DeleteItemCursor(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawSegment(), DRAWING_TOOL::drawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), EDIT_TOOL::Duplicate(), EDIT_TOOL::editFootprintInFpEditor(), MODULE_EDITOR_TOOLS::EnumeratePads(), EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandSelectedConnection(), MODULE_EDITOR_TOOLS::ExplodePadToShapes(), SELECTION_TOOL::findCallback(), SELECTION_TOOL::findMove(), EDIT_TOOL::Flip(), TOOL_BASE::getEditFrameInt(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), PCBNEW_CONTROL::GridSetOrigin(), GERBVIEW_CONTROL::HighlightControl(), PCB_EDITOR_CONTROL::HighlightNet(), PCB_EDITOR_CONTROL::HighlightNetCursor(), ALIGN_DISTRIBUTE_TOOL::Init(), PAD_TOOL::Init(), PCB_EDITOR_CONTROL::Init(), POINT_EDITOR::Init(), POSITION_RELATIVE_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineDrag(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isInteractiveDragEnabled(), TOOL_BASE::IsToolActive(), ZOOM_TOOL::Main(), PICKER_TOOL::Main(), EDIT_TOOL::Main(), SELECTION_TOOL::Main(), mainLoop(), ROUTER_TOOL::mainLoop(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), PAD_TOOL::pastePadProperties(), EDIT_TOOL::pickCopyReferencePoint(), PCBNEW_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceDXF(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), SELECTION_TOOL::RequestSelection(), CVPCB_CONTROL::ResetCoords(), PCBNEW_CONTROL::ResetCoords(), TOOL_INTERACTIVE::resetTransitions(), EDIT_TOOL::Rotate(), TOOL_INTERACTIVE::RunMainStack(), ZONE_FILLER_TOOL::SegzoneDeleteFill(), SELECTION_TOOL::selectCopper(), PCB_TOOL::selection(), GERBVIEW_SELECTION_TOOL::SelectItem(), SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), SELECTION_TOOL::SelectItems(), GERBVIEW_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectNet(), SELECTION_TOOL::selectOnSheetFromEeschema(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), SELECTION_TOOL::selectSameSheet(), TOOL_INTERACTIVE::SetContextMenu(), PCB_EDITOR_CONTROL::ShowLocalRatsnest(), GERBVIEW_SELECTION_TOOL::toggleSelection(), SELECTION_TOOL::toggleSelection(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), GERBVIEW_SELECTION_TOOL::UnselectItem(), SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SELECTION_TOOL::UnselectItems(), PCB_EDITOR_CONTROL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), PCB_EDITOR_CONTROL::ZoneDuplicate(), and PCB_EDITOR_CONTROL::ZoneMerge().

std::string TOOL_BASE::m_toolName
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName

(eg. pcbnew.InteractiveSelection).

Definition at line 214 of file tool_base.h.

TOOL_SETTINGS TOOL_BASE::m_toolSettings
protectedinherited

Definition at line 216 of file tool_base.h.

Referenced by TOOL_BASE::attachManager().

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Stores the type of the tool.

Definition at line 207 of file tool_base.h.


The documentation for this class was generated from the following files: