KiCad PCB EDA Suite
DIALOG_PRINT_USING_PRINTER Class Reference

Dialog to print schematic. More...

Inheritance diagram for DIALOG_PRINT_USING_PRINTER:
DIALOG_PRINT_USING_PRINTER_BASE DIALOG_PRINT_USING_PRINTER_BASE DIALOG_PRINT_USING_PRINTER_BASE DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM DIALOG_SHIM

Public Member Functions

 DIALOG_PRINT_USING_PRINTER (PCB_EDIT_FRAME *parent)
 
bool IsMirrored ()
 
bool ExcludeEdges ()
 
bool PrintUsingSinglePage ()
 
int SetLayerSetFromListSelection ()
 
 DIALOG_PRINT_USING_PRINTER (SCH_EDIT_FRAME *aParent)
 
SCH_EDIT_FRAMEGetParent () const
 
 DIALOG_PRINT_USING_PRINTER (GERBVIEW_FRAME *parent)
 
 ~DIALOG_PRINT_USING_PRINTER ()
 
bool IsMirrored ()
 
bool PrintUsingSinglePage ()
 
int SetLayerSetFromListSelection ()
 
bool PreparePrintPrms ()
 
int ShowQuasiModal ()
 
void EndQuasiModal (int retCode)
 
bool IsQuasiModal ()
 
bool Show (bool show) override
 
bool Enable (bool enable) override
 
KIWAYKiway () const
 Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in. More...
 
PROJECTPrj () const
 Function Prj returns a reference to the PROJECT "associated with" this KIWAY. More...
 
void SetKiway (wxWindow *aDest, KIWAY *aKiway)
 Function SetKiway. More...
 

Protected Types

enum  {
  wxID_FRAME_SEL = 1000, wxID_PRINT_MODE = 1000, wxID_PAGE_MODE, wxID_PRINT_OPTIONS,
  wxID_PRINT_ALL
}
 
enum  { wxID_PRINT_MODE = 1000, wxID_PRINT_OPTIONS, wxID_PRINT_ALL }
 

Protected Member Functions

void FinishDialogSettings ()
 In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls. More...
 
void FixOSXCancelButtonIssue ()
 A ugly hack to fix an issue on OSX: when typing ctrl+c in a wxTextCtrl inside a dialog, it is closed instead of copying a text if a button with wxID_CANCEL is used in a wxStdDialogButtonSizer, when the dlg is created by wxFormBuilder: the label is &Cancel, and this accelerator key has priority to copy text standard accelerator, and the dlg is closed when trying to copy text this function do nothing on other platforms. More...
 

Protected Attributes

wxStaticText * m_staticText4
 
wxCheckListBox * m_CopperLayersList
 
wxStaticText * m_staticText5
 
wxCheckListBox * m_TechnicalLayersList
 
wxCheckBox * m_Exclude_Edges_Pcb
 
wxRadioBox * m_ScaleOption
 
wxStaticText * m_FineAdjustXscaleTitle
 
wxTextCtrl * m_FineAdjustXscaleOpt
 
wxStaticText * m_FineAdjustYscaleTitle
 
wxTextCtrl * m_FineAdjustYscaleOpt
 
wxStaticText * m_TextPenWidth
 
wxTextCtrl * m_DialogPenWidth
 
wxCheckBox * m_Print_Sheet_Ref
 
wxCheckBox * m_Print_Mirror
 
wxRadioBox * m_Drill_Shape_Opt
 
wxRadioBox * m_ModeColorOption
 
wxRadioBox * m_PagesOption
 
wxButton * m_buttonOption
 
wxButton * m_buttonPreview
 
wxButton * m_buttonPrint
 
wxButton * m_buttonQuit
 
wxStaticText * m_staticText1
 
wxCheckBox * m_checkReference
 
wxCheckBox * m_checkMonochrome
 
wxButton * m_buttonPageSetup
 
wxStaticBoxSizer * m_leftLayersBoxSizer
 
wxStaticBoxSizer * m_rightLayersBoxSizer
 
std::string m_hash_key
 
EVENT_LOOPm_qmodal_loop
 
bool m_qmodal_showing
 
WDO_ENABLE_DISABLEm_qmodal_parent_disabler
 

Private Member Functions

void OnCloseWindow (wxCloseEvent &event) override
 
void OnPageSetup (wxCommandEvent &event) override
 
void OnPrintPreview (wxCommandEvent &event) override
 
void OnPrintButtonClick (wxCommandEvent &event) override
 
void OnScaleSelectionClick (wxCommandEvent &event) override
 
void OnButtonCancelClick (wxCommandEvent &event) override
 
void OnInitDlg (wxInitDialogEvent &event) override
 
void SetPrintParameters ()
 
void SetPenWidth ()
 
void initValues ()
 
void OnCloseWindow (wxCloseEvent &event) override
 
void OnPageSetup (wxCommandEvent &event) override
 
void OnPrintPreview (wxCommandEvent &event) override
 
void OnPrintButtonClick (wxCommandEvent &event) override
 
void OnButtonCancelClick (wxCommandEvent &event) override
 
void initDialog ()
 
void GetPrintOptions ()
 
void OnCloseWindow (wxCloseEvent &event) override
 
void OnInitDialog (wxInitDialogEvent &event)
 
void OnPageSetup (wxCommandEvent &event) override
 
void OnPrintPreview (wxCommandEvent &event) override
 
void OnPrintButtonClick (wxCommandEvent &event) override
 
void OnScaleSelectionClick (wxCommandEvent &event) override
 
void OnButtonCloseClick (wxCommandEvent &event) override
 
void SetPrintParameters ()
 
void InitValues ()
 

Private Attributes

PCB_EDIT_FRAMEm_parent
 
wxConfigBase * m_config
 
std::pair< wxCheckListBox *, int > m_boxSelectLayer [PCB_LAYER_ID_COUNT]
 
GERBVIEW_FRAMEm_Parent
 
wxConfigBase * m_Config
 
wxCheckBox * m_BoxSelectLayer [32]
 

Static Private Attributes

static bool m_ExcludeEdgeLayer
 

Detailed Description

Dialog to print schematic.

Class DIALOG_PRINT_USING_PRINTER offers to print a schematic dialog.

Class derived from DIALOG_PRINT_USING_PRINTER_BASE created by wxFormBuilder

Derived from DIALOG_PRINT_USING_PRINTER_base created by wxFormBuilder

Definition at line 69 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

Member Enumeration Documentation

Constructor & Destructor Documentation

DIALOG_PRINT_USING_PRINTER::DIALOG_PRINT_USING_PRINTER ( PCB_EDIT_FRAME parent)

Definition at line 154 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References initValues(), Kiface(), KIFACE_I::KifaceSettings(), m_boxSelectLayer, DIALOG_PRINT_USING_PRINTER_BASE::m_buttonPreview, m_config, and m_parent.

154  :
156 {
157  m_parent = parent;
159  memset( m_boxSelectLayer, 0, sizeof( m_boxSelectLayer ) );
160 
161  initValues( );
162 #ifdef __WXMAC__
163  /* Problems with modal on wx-2.9 - Anyway preview is standard for OSX */
164  m_buttonPreview->Hide();
165 #endif
166 }
KIFACE_I & Kiface()
Global KIFACE_I "get" accessor.
Definition: kicad.cpp:52
std::pair< wxCheckListBox *, int > m_boxSelectLayer[PCB_LAYER_ID_COUNT]
DIALOG_PRINT_USING_PRINTER_BASE(wxWindow *parent, wxWindowID id=wxID_ANY, const wxString &title=_("Print"), const wxPoint &pos=wxDefaultPosition, const wxSize &size=wxSize(746, 385), long style=wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER)
wxConfigBase * KifaceSettings() const
Definition: kiface_i.h:103
DIALOG_PRINT_USING_PRINTER::DIALOG_PRINT_USING_PRINTER ( SCH_EDIT_FRAME aParent)

Definition at line 145 of file eeschema/dialogs/dialog_print_using_printer.cpp.

References SCH_EDIT_FRAME::GetPrintMonochrome(), SCH_EDIT_FRAME::GetPrintSheetReference(), initDialog(), DIALOG_PRINT_USING_PRINTER_BASE::m_buttonPreview, DIALOG_PRINT_USING_PRINTER_BASE::m_checkMonochrome, and DIALOG_PRINT_USING_PRINTER_BASE::m_checkReference.

145  :
147 {
148  wxASSERT( aParent != NULL );
149 
150  m_checkReference->SetValue( aParent->GetPrintSheetReference() );
151  m_checkMonochrome->SetValue( aParent->GetPrintMonochrome() );
152  initDialog();
153 
154 #ifdef __WXMAC__
155  // Problems with modal on wx-2.9 - Anyway preview is standard for OSX
156  m_buttonPreview->Hide();
157 #endif
158 
159  GetSizer()->Fit( this );
160 }
bool GetPrintMonochrome()
Definition: schframe.h:655
bool GetPrintSheetReference()
Definition: schframe.h:657
DIALOG_PRINT_USING_PRINTER_BASE(wxWindow *parent, wxWindowID id=wxID_ANY, const wxString &title=_("Print"), const wxPoint &pos=wxDefaultPosition, const wxSize &size=wxSize(746, 385), long style=wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER)
DIALOG_PRINT_USING_PRINTER::DIALOG_PRINT_USING_PRINTER ( GERBVIEW_FRAME parent)

Definition at line 125 of file gerbview/dialogs/dialog_print_using_printer.cpp.

References InitValues(), Kiface(), KIFACE_I::KifaceSettings(), DIALOG_PRINT_USING_PRINTER_BASE::m_buttonPreview, m_Config, and m_Parent.

125  :
127 {
128  m_Parent = parent;
130 
131  InitValues( );
132  GetSizer()->SetSizeHints( this );
133 
134 #ifdef __WXMAC__
135  /* Problems with modal on wx-2.9 - Anyway preview is standard for OSX */
136  m_buttonPreview->Hide();
137 #endif
138 
139  GetSizer()->Fit( this );
140 }
KIFACE_I & Kiface()
Global KIFACE_I "get" accessor.
Definition: kicad.cpp:52
DIALOG_PRINT_USING_PRINTER_BASE(wxWindow *parent, wxWindowID id=wxID_ANY, const wxString &title=_("Print"), const wxPoint &pos=wxDefaultPosition, const wxSize &size=wxSize(746, 385), long style=wxDEFAULT_DIALOG_STYLE|wxRESIZE_BORDER)
wxConfigBase * KifaceSettings() const
Definition: kiface_i.h:103
DIALOG_PRINT_USING_PRINTER::~DIALOG_PRINT_USING_PRINTER ( )
inline

Definition at line 79 of file gerbview/dialogs/dialog_print_using_printer.cpp.

79 {};

Member Function Documentation

bool DIALOG_SHIM::Enable ( bool  enable)
overrideinherited

Definition at line 182 of file dialog_shim.cpp.

Referenced by InitValues().

183 {
184  // so we can do logging of this state change:
185 
186 #if defined(DEBUG)
187  const char* type_id = typeid( *this ).name();
188  printf( "wxDialog %s: %s\n", type_id, enable ? "enabled" : "disabled" );
189 #endif
190 
191  return wxDialog::Enable( enable );
192 }
void DIALOG_SHIM::EndQuasiModal ( int  retCode)
inherited

Definition at line 540 of file dialog_shim.cpp.

References DIALOG_SHIM::IsQuasiModal(), DIALOG_SHIM::m_qmodal_loop, DIALOG_SHIM::m_qmodal_parent_disabler, DIALOG_SHIM::m_qmodal_showing, and DIALOG_SHIM::Show().

Referenced by HK_PROMPT_DIALOG::EndFlexible(), DIALOG_SHIM::OnButton(), DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::OnCancelButtonClick(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnCancelButtonClick(), DIALOG_EDIT_ONE_FIELD::OnCancelClick(), DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::OnCloseDialog(), DIALOG_EDIT_ONE_FIELD::OnCloseDialog(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnCloseDialog(), DIALOG_CHOOSE_COMPONENT::OnCloseTimer(), DIALOG_SHIM::OnCloseWindow(), DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::OnOKButtonClick(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnOKButtonClick(), DIALOG_EDIT_ONE_FIELD::OnOkClick(), DIALOG_EXCHANGE_MODULE::OnQuit(), DIALOG_CHOOSE_COMPONENT::OnSchViewDClick(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::SetInitCmp(), and DIALOG_SHIM::~DIALOG_SHIM().

541 {
542  // Hook up validator and transfer data from controls handling so quasi-modal dialogs
543  // handle validation in the same way as other dialogs.
544  if( ( retCode == wxID_OK ) && ( !Validate() || !TransferDataFromWindow() ) )
545  return;
546 
547  SetReturnCode( retCode );
548 
549  if( !IsQuasiModal() )
550  {
551  wxFAIL_MSG( wxT( "either DIALOG_SHIM::EndQuasiModal called twice or ShowQuasiModal wasn't called" ) );
552  return;
553  }
554 
555  m_qmodal_showing = false;
556 
557  if( m_qmodal_loop )
558  {
559  if( m_qmodal_loop->IsRunning() )
560  m_qmodal_loop->Exit( 0 );
561  else
562  m_qmodal_loop->ScheduleExit( 0 );
563 
564  m_qmodal_loop = NULL;
565  }
566 
569 
570  Show( false );
571 }
bool m_qmodal_showing
Definition: dialog_shim.h:132
EVENT_LOOP * m_qmodal_loop
Definition: dialog_shim.h:131
bool IsQuasiModal()
Definition: dialog_shim.h:93
bool Show(bool show) override
WDO_ENABLE_DISABLE * m_qmodal_parent_disabler
Definition: dialog_shim.h:133
bool DIALOG_PRINT_USING_PRINTER::ExcludeEdges ( )
inline
void DIALOG_SHIM::FinishDialogSettings ( )
protectedinherited

In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls.

FinishDialogSettings must be called from derived classes, when all widgets are initialized, and therefore their size fixed. If TransferDataToWindow() is used to initialize widgets, at end of TransferDataToWindow, or better at end of a wxInitDialogEvent handler

In any case, the best way is to call it in a wxInitDialogEvent handler after calling TransfertDataToWindow(), which is the default wxInitDialogEvent handler wxDialog

Definition at line 104 of file dialog_shim.cpp.

References PCAD2KICAD::Center.

Referenced by COLOR4D_PICKER_DLG::COLOR4D_PICKER_DLG(), DIALOG_BOM::DIALOG_BOM(), DIALOG_COPPER_ZONE::DIALOG_COPPER_ZONE(), DIALOG_DESIGN_RULES::DIALOG_DESIGN_RULES(), DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR(), DIALOG_DISPLAY_OPTIONS::DIALOG_DISPLAY_OPTIONS(), DIALOG_DRC_CONTROL::DIALOG_DRC_CONTROL(), DIALOG_EDIT_COMPONENT_IN_LIBRARY::DIALOG_EDIT_COMPONENT_IN_LIBRARY(), DIALOG_EDIT_COMPONENTS_LIBID::DIALOG_EDIT_COMPONENTS_LIBID(), DIALOG_EDIT_LINE_STYLE::DIALOG_EDIT_LINE_STYLE(), DIALOG_EESCHEMA_OPTIONS::DIALOG_EESCHEMA_OPTIONS(), DIALOG_ENUM_PADS::DIALOG_ENUM_PADS(), DIALOG_EXPORT_3DFILE::DIALOG_EXPORT_3DFILE(), DIALOG_EXPORT_IDF3::DIALOG_EXPORT_IDF3(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_FOOTPRINT_WIZARD_LIST::DIALOG_FOOTPRINT_WIZARD_LIST(), DIALOG_GLOBAL_SYM_LIB_TABLE_CONFIG::DIALOG_GLOBAL_SYM_LIB_TABLE_CONFIG(), DIALOG_KEEPOUT_AREA_PROPERTIES::DIALOG_KEEPOUT_AREA_PROPERTIES(), DIALOG_LABEL_EDITOR::DIALOG_LABEL_EDITOR(), DIALOG_LIB_EDIT_DRAW_ITEM::DIALOG_LIB_EDIT_DRAW_ITEM(), DIALOG_LIB_EDIT_TEXT::DIALOG_LIB_EDIT_TEXT(), DIALOG_LIB_NEW_COMPONENT::DIALOG_LIB_NEW_COMPONENT(), DIALOG_LIBEDIT_OPTIONS::DIALOG_LIBEDIT_OPTIONS(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_SCH_EDIT_SHEET_PIN::DIALOG_SCH_EDIT_SHEET_PIN(), DIALOG_SCH_SHEET_PROPS::DIALOG_SCH_SHEET_PROPS(), DIALOG_SELECT_PRETTY_LIB::DIALOG_SELECT_PRETTY_LIB(), DIALOG_TRACK_VIA_SIZE::DIALOG_TRACK_VIA_SIZE(), DIALOG_EDIT_ONE_FIELD::init(), NETLIST_DIALOG::NETLIST_DIALOG(), DIALOG_LIB_EDIT_PIN::OnInitDialog(), DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::OnInitDialog(), DIALOG_TRACK_VIA_PROPERTIES::OnInitDlg(), DIALOG_GRAPHIC_ITEMS_OPTIONS::OnInitDlg(), DialogEditModuleText::OnInitDlg(), DIALOG_SET_GRID::OnInitDlg(), DIALOG_PCB_TEXT_PROPERTIES::OnInitDlg(), DIALOG_PRINT_FOR_MODEDIT::OnInitDlg(), DIALOG_GRAPHIC_ITEM_PROPERTIES::OnInitDlg(), DIALOG_MODULE_MODULE_EDITOR::OnInitDlg(), DIALOG_SIM_SETTINGS::onInitDlg(), DIALOG_SPICE_MODEL::onInitDlg(), DIALOG_MODULE_BOARD_EDITOR::OnInitDlg(), OnInitDlg(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnInitDlg(), TARGET_PROPERTIES_DIALOG_EDITOR::TARGET_PROPERTIES_DIALOG_EDITOR(), and DIALOG_SIGNAL_LIST::TransferDataToWindow().

105 {
106  // must be called from the constructor of derived classes,
107  // when all widgets are initialized, and therefore their size fixed
108 
109  // SetSizeHints fixes the minimal size of sizers in the dialog
110  // (SetSizeHints calls Fit(), so no need to call it)
111  GetSizer()->SetSizeHints( this );
112 
113  // the default position, when calling the first time the dlg
114  Center();
115 }
void DIALOG_SHIM::FixOSXCancelButtonIssue ( )
protectedinherited

A ugly hack to fix an issue on OSX: when typing ctrl+c in a wxTextCtrl inside a dialog, it is closed instead of copying a text if a button with wxID_CANCEL is used in a wxStdDialogButtonSizer, when the dlg is created by wxFormBuilder: the label is &Cancel, and this accelerator key has priority to copy text standard accelerator, and the dlg is closed when trying to copy text this function do nothing on other platforms.

Definition at line 117 of file dialog_shim.cpp.

Referenced by DIALOG_SHIM::Show().

118 {
119 #ifdef __WXMAC__
120  // A ugly hack to fix an issue on OSX: ctrl+c closes the dialog instead of
121  // copying a text if a button with wxID_CANCEL is used in a wxStdDialogButtonSizer
122  // created by wxFormBuilder: the label is &Cancel, and this accelerator key has priority
123  // to copy text standard accelerator, and the dlg is closed when trying to copy text
124  wxButton* button = dynamic_cast< wxButton* > ( wxWindow::FindWindowById( wxID_CANCEL, this ) );
125 
126  if( button )
127  button->SetLabel( _( "Cancel" ) );
128 #endif
129 }
SCH_EDIT_FRAME* DIALOG_PRINT_USING_PRINTER::GetParent ( ) const
inline

Definition at line 55 of file eeschema/dialogs/dialog_print_using_printer.cpp.

Referenced by GetPrintOptions(), and initDialog().

56  {
57  return ( SCH_EDIT_FRAME* ) wxWindow::GetParent();
58  }
Schematic editor (Eeschema) main window.
Definition: schframe.h:118
void DIALOG_PRINT_USING_PRINTER::GetPrintOptions ( )
private
void DIALOG_PRINT_USING_PRINTER::initDialog ( )
private

Definition at line 163 of file eeschema/dialogs/dialog_print_using_printer.cpp.

References PCAD2KICAD::Center, PAGE_INFO::GetHeightMils(), SCH_SCREEN::GetPageSettings(), SCH_EDIT_FRAME::GetPageSetupData(), PAGE_INFO::GetPaperId(), GetParent(), SCH_EDIT_FRAME::GetScreen(), PAGE_INFO::GetWidthMils(), PAGE_INFO::GetWxOrientation(), PAGE_INFO::IsCustom(), PAGE_INFO::IsPortrait(), DIALOG_PRINT_USING_PRINTER_BASE::m_buttonPrint, and Mils2mm().

Referenced by DIALOG_PRINT_USING_PRINTER().

164 {
165  SCH_EDIT_FRAME* parent = GetParent();
166 
167  // Initialize page specific print setup dialog settings.
168  const PAGE_INFO& pageInfo = parent->GetScreen()->GetPageSettings();
169  wxPageSetupDialogData& pageSetupDialogData = parent->GetPageSetupData();
170 
171  pageSetupDialogData.SetPaperId( pageInfo.GetPaperId() );
172 
173  if( pageInfo.IsCustom() )
174  {
175  if( pageInfo.IsPortrait() )
176  pageSetupDialogData.SetPaperSize( wxSize( Mils2mm( pageInfo.GetWidthMils() ),
177  Mils2mm( pageInfo.GetHeightMils() ) ) );
178  else
179  pageSetupDialogData.SetPaperSize( wxSize( Mils2mm( pageInfo.GetHeightMils() ),
180  Mils2mm( pageInfo.GetWidthMils() ) ) );
181  }
182 
183  pageSetupDialogData.GetPrintData().SetOrientation( pageInfo.GetWxOrientation() );
184 
185  if ( GetSizer() )
186  GetSizer()->SetSizeHints( this );
187 
188  // Rely on the policy in class DIALOG_SHIM, which centers the dialog
189  // initially during a runtime session but gives user the ability to move it in
190  // that session.
191  // This dialog may get moved and resized in Show(), but in case this is
192  // the first time, center it for starters.
193  Center();
194 
195  m_buttonPrint->SetDefault(); // on linux, this is inadequate to determine
196  // what ENTER does. Must also SetFocus().
197  m_buttonPrint->SetFocus();
198 }
Schematic editor (Eeschema) main window.
Definition: schframe.h:118
SCH_SCREEN * GetScreen() const override
Function GetScreen returns a pointer to a BASE_SCREEN or one of its derivatives.
Definition: schframe.cpp:534
bool IsPortrait() const
Class PAGE_INFO describes the page size and margins of a paper page on which to eventually print or p...
int Mils2mm(double x)
Convert mils to mm.
Definition: base_units.h:44
wxPageSetupDialogData & GetPageSetupData()
Definition: schframe.h:638
int GetWidthMils() const
bool IsCustom() const
Function IsCustom returns true if the type is Custom.
wxPaperSize GetPaperId() const
Function GetPaperId.
const PAGE_INFO & GetPageSettings() const
wxPrintOrientation GetWxOrientation() const
Function GetWxOrientation.
int GetHeightMils() const
void DIALOG_PRINT_USING_PRINTER::InitValues ( )
private

Definition at line 143 of file gerbview/dialogs/dialog_print_using_printer.cpp.

References DIALOG_SHIM::Enable(), GERBER_DRAWLAYERS_COUNT, GERBER_FILE_IMAGE_LIST::GetGbrImage(), GERBVIEW_FRAME::GetGerberLayout(), GBR_LAYOUT::GetImagesList(), GERBER_FILE_IMAGE_LIST::ImagesMaxCount(), m_BoxSelectLayer, m_Config, DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustXscaleOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustYscaleOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_leftLayersBoxSizer, DIALOG_PRINT_USING_PRINTER_BASE::m_ModeColorOption, PRINT_PARAMETERS::m_PageSetupData, m_Parent, PRINT_PARAMETERS::m_PenDefaultSize, PRINT_PARAMETERS::m_Print_Black_and_White, DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Mirror, PRINT_PARAMETERS::m_Print_Sheet_Ref, PRINT_PARAMETERS::m_PrintMirror, PRINT_PARAMETERS::m_PrintScale, DIALOG_PRINT_USING_PRINTER_BASE::m_rightLayersBoxSizer, DIALOG_PRINT_USING_PRINTER_BASE::m_ScaleOption, PRINT_PARAMETERS::m_XScaleAdjust, PRINT_PARAMETERS::m_YScaleAdjust, MAX_SCALE, MIN_SCALE, OPTKEY_LAYERBASE, OPTKEY_PRINT_MONOCHROME_MODE, OPTKEY_PRINT_PAGE_FRAME, OPTKEY_PRINT_SCALE, OPTKEY_PRINT_X_FINESCALE_ADJ, OPTKEY_PRINT_Y_FINESCALE_ADJ, s_pageSetupData, and s_ScaleList.

Referenced by DIALOG_PRINT_USING_PRINTER().

144 {
145  SetFocus();
146  wxString msg;
147 
148  if( s_pageSetupData == NULL )
149  {
150  s_pageSetupData = new wxPageSetupDialogData;
151  // Set initial page margins.
152  // Margins are already set in Gerbview, so we can use 0
153  s_pageSetupData->SetMarginTopLeft( wxPoint( 0, 0 ) );
154  s_pageSetupData->SetMarginBottomRight( wxPoint( 0, 0 ) );
155  }
156 
159 
160  // Create layer list
161  for( unsigned ii = 0; ii < images->ImagesMaxCount(); ++ii )
162  {
163  msg = _( "Layer" );
164  msg << wxT( " " ) << ii + 1;
165 
166  wxStaticBoxSizer* boxSizer = ( ii < 16 ) ? m_leftLayersBoxSizer
168 
169  m_BoxSelectLayer[ii] = new wxCheckBox( boxSizer->GetStaticBox(),
170  wxID_ANY, msg );
171  boxSizer->Add( m_BoxSelectLayer[ii], wxGROW | wxLEFT | wxRIGHT | wxTOP );
172 
173  if( images->GetGbrImage( ii ) == NULL ) // Nothing loaded on this draw layer
174  m_BoxSelectLayer[ii]->Enable( false );
175  }
176 
177  // Read the scale adjust option
178  int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
179 
180  if( m_Config )
181  {
184  m_Config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
187 
188  // Test for a reasonnable scale value. Set to 1 if problem
194 
195  for( int layer = 0; layer < GERBER_DRAWLAYERS_COUNT; ++layer )
196  {
197  wxString layerKey;
198  bool option;
199 
200  layerKey.Printf( OPTKEY_LAYERBASE, layer );
201  m_Config->Read( layerKey, &option, false );
202  m_BoxSelectLayer[layer]->SetValue( option );
203  }
204  }
205 
206  m_ScaleOption->SetSelection( scale_idx );
207  scale_idx = m_ScaleOption->GetSelection();
210 
211 
213  m_ModeColorOption->SetSelection( 1 );
214  else
215  m_ModeColorOption->SetSelection( 0 );
216 
218 
219  // Create scale adjust option
220  msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
221  m_FineAdjustXscaleOpt->SetValue( msg );
222  msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
223  m_FineAdjustYscaleOpt->SetValue( msg );
224 
225  bool enable = (s_Parameters.m_PrintScale == 1.0);
226 
227  m_FineAdjustXscaleOpt->Enable(enable);
228  m_FineAdjustYscaleOpt->Enable(enable);
229 }
static PRINT_PARAMETERS s_Parameters
GERBER_FILE_IMAGE_LIST is a helper class to handle a list of GERBER_FILE_IMAGE files which are loaded...
#define GERBER_DRAWLAYERS_COUNT
GERBER_FILE_IMAGE * GetGbrImage(int aIdx)
static wxPageSetupDialogData * s_pageSetupData
GBR_LAYOUT * GetGerberLayout() const
wxPageSetupDialogData * m_PageSetupData
GERBER_FILE_IMAGE_LIST * GetImagesList() const
bool Enable(bool enable) override
void DIALOG_PRINT_USING_PRINTER::initValues ( )
private

Definition at line 169 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References AddUnitSymbol(), g_DrawDefaultLineThickness, g_UserUnit, PCB_BASE_FRAME::GetBoard(), BOARD::GetEnabledLayers(), BOARD::GetLayerName(), IsCopperLayer(), m_boxSelectLayer, m_config, DIALOG_PRINT_USING_PRINTER_BASE::m_CopperLayersList, DIALOG_PRINT_USING_PRINTER_BASE::m_DialogPenWidth, DIALOG_PRINT_USING_PRINTER_BASE::m_Drill_Shape_Opt, PRINT_PARAMETERS::m_DrillShapeOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_Exclude_Edges_Pcb, m_ExcludeEdgeLayer, DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustXscaleOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustYscaleOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_ModeColorOption, PRINT_PARAMETERS::m_OptionPrintPage, PRINT_PARAMETERS::m_PageSetupData, DIALOG_PRINT_USING_PRINTER_BASE::m_PagesOption, m_parent, PRINT_PARAMETERS::m_PenDefaultSize, PRINT_PARAMETERS::m_Print_Black_and_White, DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Mirror, PRINT_PARAMETERS::m_Print_Sheet_Ref, DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Sheet_Ref, PRINT_PARAMETERS::m_PrintMirror, PRINT_PARAMETERS::m_PrintScale, DIALOG_PRINT_USING_PRINTER_BASE::m_ScaleOption, DIALOG_PRINT_USING_PRINTER_BASE::m_TechnicalLayersList, DIALOG_PRINT_USING_PRINTER_BASE::m_TextPenWidth, PRINT_PARAMETERS::m_XScaleAdjust, PRINT_PARAMETERS::m_YScaleAdjust, MAX_SCALE, MIN_SCALE, OPTKEY_LAYERBASE, OPTKEY_PRINT_MONOCHROME_MODE, OPTKEY_PRINT_PADS_DRILL, OPTKEY_PRINT_PAGE_FRAME, OPTKEY_PRINT_PAGE_PER_LAYER, OPTKEY_PRINT_SCALE, OPTKEY_PRINT_X_FINESCALE_ADJ, OPTKEY_PRINT_Y_FINESCALE_ADJ, s_pageSetupData, s_ScaleList, PRINT_PARAMETERS::SMALL_DRILL_SHAPE, StringFromValue(), and LSET::UIOrder().

Referenced by DIALOG_PRINT_USING_PRINTER().

170 {
171  wxString msg;
172  BOARD* board = m_parent->GetBoard();
173 
175 
176  // Create layer list.
177  LSEQ seq = board->GetEnabledLayers().UIOrder();
178 
179  for( ; seq; ++seq )
180  {
181  PCB_LAYER_ID layer = *seq;
182  int checkIndex;
183 
184  if( IsCopperLayer( layer ) )
185  {
186  checkIndex = m_CopperLayersList->Append( board->GetLayerName( layer ) );
187  m_boxSelectLayer[layer] = std::make_pair( m_CopperLayersList, checkIndex );
188  }
189  else
190  {
191  checkIndex = m_TechnicalLayersList->Append( board->GetLayerName( layer ) );
192  m_boxSelectLayer[layer] = std::make_pair( m_TechnicalLayersList, checkIndex );
193  }
194 
195  if( m_config )
196  {
197  wxString layerKey;
198  layerKey.Printf( OPTKEY_LAYERBASE, layer );
199  bool option;
200 
201  if( m_config->Read( layerKey, &option ) )
202  m_boxSelectLayer[layer].first->Check( checkIndex, option );
203  }
204  }
205 
206  // Option for excluding contents of "Edges Pcb" layer
207  m_Exclude_Edges_Pcb->Show( true );
208 
209  // Read the scale adjust option
210  int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
211 
212  if( m_config )
213  {
216  m_config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
220  int tmp;
223 
224  // Test for a reasonable scale value. Set to 1 if problem
230  }
231 
232  m_ScaleOption->SetSelection( scale_idx );
233  scale_idx = m_ScaleOption->GetSelection();
238 
239  // Options to plot pads and vias holes
241 
243  m_ModeColorOption->SetSelection( 1 );
244  else
245  m_ModeColorOption->SetSelection( 0 );
246 
250  m_DialogPenWidth->SetValue(
252 
253  // Create scale adjust option
254  msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
255  m_FineAdjustXscaleOpt->SetValue( msg );
256 
257  msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
258  m_FineAdjustYscaleOpt->SetValue( msg );
259 
260  bool enable = (s_Parameters.m_PrintScale == 1.0);
261  m_FineAdjustXscaleOpt->Enable(enable);
262  m_FineAdjustYscaleOpt->Enable(enable);
263 }
#define OPTKEY_PRINT_MONOCHROME_MODE
Definition: pcbplot.h:58
#define OPTKEY_LAYERBASE
Definition: pcbplot.h:52
wxString StringFromValue(EDA_UNITS_T aUnit, int aValue, bool aAddUnitSymbol)
Function StringFromValue returns the string from aValue according to units (inch, mm ...
Definition: base_units.cpp:203
#define OPTKEY_PRINT_SCALE
Definition: pcbplot.h:55
BOARD * GetBoard() const
#define OPTKEY_PRINT_PAGE_FRAME
Definition: pcbplot.h:57
LSET GetEnabledLayers() const
Function GetEnabledLayers is a proxy function that calls the corresponding function in m_BoardSetting...
#define OPTKEY_PRINT_Y_FINESCALE_ADJ
Definition: pcbplot.h:54
PCB_LAYER_ID
A quick note on layer IDs:
std::pair< wxCheckListBox *, int > m_boxSelectLayer[PCB_LAYER_ID_COUNT]
static PRINT_PARAMETERS s_Parameters
const wxString GetLayerName(PCB_LAYER_ID aLayer) const
Function GetLayerName returns the name of a layer given by aLayer.
DrillShapeOptT m_DrillShapeOpt
int g_DrawDefaultLineThickness
Default line thickness in internal units used to draw or plot items using a default thickness line va...
Class LSEQ is a sequence (and therefore also a set) of PCB_LAYER_IDs.
wxPageSetupDialogData * m_PageSetupData
EDA_UNITS_T g_UserUnit
Global variables definitions.
Definition: common.cpp:56
#define OPTKEY_PRINT_X_FINESCALE_ADJ
Definition: pcbplot.h:53
void AddUnitSymbol(wxStaticText &Stext, EDA_UNITS_T aUnit)
Definition: base_units.cpp:509
#define OPTKEY_PRINT_PADS_DRILL
Definition: pcbplot.h:60
Class BOARD holds information pertinent to a Pcbnew printed circuit board.
Definition: class_board.h:169
#define OPTKEY_PRINT_PAGE_PER_LAYER
Definition: pcbplot.h:59
bool IsCopperLayer(LAYER_NUM aLayerId)
Function IsCopperLayer tests whether a layer is a copper layer.
LSEQ UIOrder() const
Definition: lset.cpp:759
static wxPageSetupDialogData * s_pageSetupData
bool DIALOG_PRINT_USING_PRINTER::IsMirrored ( )
inline
bool DIALOG_PRINT_USING_PRINTER::IsMirrored ( )
inline
KIWAY& KIWAY_HOLDER::Kiway ( ) const
inlineinherited

Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in.

A KIWAY_HOLDER is not necessarily a KIWAY_PLAYER.

Definition at line 60 of file kiway_player.h.

References KIWAY_HOLDER::m_kiway.

Referenced by SCH_EDIT_FRAME::AppendSchematic(), CVPCB_MAINFRAME::BuildLIBRARY_LISTBOX(), DIALOG_CHOOSE_COMPONENT::ConstructRightPanel(), CVPCB_MAINFRAME::CreateScreenCmp(), CVPCB_MAINFRAME::CVPCB_MAINFRAME(), DIALOG_SHIM::DIALOG_SHIM(), EDIT_TOOL::editFootprintInFpEditor(), SCH_EDIT_FRAME::EditSheet(), DISPLAY_FOOTPRINTS_FRAME::Get_Module(), FOOTPRINT_EDIT_FRAME::GetPlotSettings(), SCH_EDIT_FRAME::ImportFile(), PCB_EDIT_FRAME::ImportFile(), DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::initBuffers(), PCB_EDIT_FRAME::InstallModuleOptionsFrame(), KIWAY_PLAYER::language_change(), CVPCB_MAINFRAME::LoadFootprintFiles(), KIWAY_PLAYER::OnChangeIconsOptions(), CVPCB_MAINFRAME::OnEditFootprintLibraryTable(), SCH_BASE_FRAME::OnEditSymbolLibTable(), DIALOG_CHOOSE_COMPONENT::OnInitDialog(), SCH_EDIT_FRAME::OnLeftClick(), SCH_BASE_FRAME::OnOpenLibraryViewer(), SCH_EDIT_FRAME::OnSimulate(), DIALOG_EDIT_ONE_FIELD::OnTextValueSelectButtonClick(), FOOTPRINT_EDIT_FRAME::OnUpdateInsertModuleInBoard(), FOOTPRINT_EDIT_FRAME::OnUpdateLoadModuleFromBoard(), FOOTPRINT_EDIT_FRAME::OnUpdateReplaceModuleInBoard(), SCH_EDIT_FRAME::OpenProjectFiles(), KIWAY_HOLDER::Prj(), PCB_EDIT_FRAME::Process_Config(), PCB_EDIT_FRAME::Process_Special_Functions(), FOOTPRINT_EDIT_FRAME::ProcessPreferences(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), FOOTPRINT_VIEWER_FRAME::ReCreateFootprintList(), LIB_EDIT_FRAME::refreshSchematic(), SCH_EDIT_FRAME::rescueProject(), SCH_EDIT_FRAME::SaveEEFile(), CVPCB_MAINFRAME::SaveFootprintAssociation(), SCH_BASE_FRAME::SelectComponentFromLibBrowser(), CVPCB_MAINFRAME::SendMessageToEESCHEMA(), PCB_EDIT_FRAME::SendMessageToEESCHEMA(), SCH_EDIT_FRAME::SendMessageToPCBNEW(), SCH_EDIT_FRAME::sendNetlist(), FOOTPRINT_EDIT_FRAME::SetPlotSettings(), DISPLAY_FOOTPRINTS_FRAME::Show3D_Frame(), FOOTPRINT_VIEWER_FRAME::Show3D_Frame(), FOOTPRINT_EDIT_FRAME::Show3D_Frame(), FOOTPRINT_WIZARD_FRAME::Show3D_Frame(), DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::showButtonHandler(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::showButtonHandler(), SIM_PLOT_FRAME::SIM_PLOT_FRAME(), and DIALOG_EXCHANGE_MODULE::ViewAndSelectFootprint().

61  {
62  wxASSERT( m_kiway ); // smoke out bugs in Debug build, then Release runs fine.
63  return *m_kiway;
64  }
KIWAY * m_kiway
Definition: kiway_player.h:85
void DIALOG_PRINT_USING_PRINTER::OnButtonCancelClick ( wxCommandEvent &  event)
inlineoverrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 65 of file eeschema/dialogs/dialog_print_using_printer.cpp.

65 { Close(); }
void DIALOG_PRINT_USING_PRINTER::OnButtonCancelClick ( wxCommandEvent &  event)
inlineoverrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 95 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

95 { Close(); }
void DIALOG_PRINT_USING_PRINTER::OnButtonCloseClick ( wxCommandEvent &  event)
inlineoverrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 89 of file gerbview/dialogs/dialog_print_using_printer.cpp.

89 { Close(); }
void DIALOG_PRINT_USING_PRINTER::OnCloseWindow ( wxCloseEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnCloseWindow ( wxCloseEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnCloseWindow ( wxCloseEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 300 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References ConfigBaseWriteDouble(), DIM, m_boxSelectLayer, m_config, PRINT_PARAMETERS::m_DrillShapeOpt, PRINT_PARAMETERS::m_OptionPrintPage, PRINT_PARAMETERS::m_Print_Black_and_White, PRINT_PARAMETERS::m_Print_Sheet_Ref, DIALOG_PRINT_USING_PRINTER_BASE::m_ScaleOption, PRINT_PARAMETERS::m_XScaleAdjust, PRINT_PARAMETERS::m_YScaleAdjust, OPTKEY_LAYERBASE, OPTKEY_PRINT_MONOCHROME_MODE, OPTKEY_PRINT_PADS_DRILL, OPTKEY_PRINT_PAGE_FRAME, OPTKEY_PRINT_PAGE_PER_LAYER, OPTKEY_PRINT_SCALE, OPTKEY_PRINT_X_FINESCALE_ADJ, OPTKEY_PRINT_Y_FINESCALE_ADJ, and SetPrintParameters().

301 {
303 
304  if( m_config )
305  {
310  m_config->Write( OPTKEY_PRINT_SCALE, m_ScaleOption->GetSelection() );
315  wxString layerKey;
316 
317  for( unsigned layer = 0; layer < DIM(m_boxSelectLayer); ++layer )
318  {
319  if( !m_boxSelectLayer[layer].first )
320  continue;
321 
322  layerKey.Printf( OPTKEY_LAYERBASE, layer );
323  m_config->Write( layerKey,
324  m_boxSelectLayer[layer].first->IsChecked( m_boxSelectLayer[layer].second ) );
325  }
326  }
327 
328  EndModal( 0 );
329 }
#define DIM(x)
of elements in an array
Definition: macros.h:98
#define OPTKEY_PRINT_MONOCHROME_MODE
Definition: pcbplot.h:58
#define OPTKEY_LAYERBASE
Definition: pcbplot.h:52
#define OPTKEY_PRINT_SCALE
Definition: pcbplot.h:55
#define OPTKEY_PRINT_PAGE_FRAME
Definition: pcbplot.h:57
#define OPTKEY_PRINT_Y_FINESCALE_ADJ
Definition: pcbplot.h:54
std::pair< wxCheckListBox *, int > m_boxSelectLayer[PCB_LAYER_ID_COUNT]
static PRINT_PARAMETERS s_Parameters
DrillShapeOptT m_DrillShapeOpt
void ConfigBaseWriteDouble(wxConfigBase *aConfig, const wxString &aKey, double aValue)
Function ConfigBaseWriteDouble This is a helper function to write doubles in config We cannot use wxC...
#define OPTKEY_PRINT_X_FINESCALE_ADJ
Definition: pcbplot.h:53
#define OPTKEY_PRINT_PADS_DRILL
Definition: pcbplot.h:60
#define OPTKEY_PRINT_PAGE_PER_LAYER
Definition: pcbplot.h:59
void DIALOG_PRINT_USING_PRINTER::OnInitDialog ( wxInitDialogEvent &  event)
private
void DIALOG_PRINT_USING_PRINTER::OnInitDlg ( wxInitDialogEvent &  event)
inlineoverrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 97 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References DIALOG_SHIM::FinishDialogSettings().

98  {
99  // Call the default wxDialog handler of a wxInitDialogEvent
100  TransferDataToWindow();
101 
102  // Now all widgets have the size fixed, call FinishDialogSettings
104  }
void FinishDialogSettings()
In all dialogs, we must call the same functions to fix minimal dlg size, the default position and per...
void DIALOG_PRINT_USING_PRINTER::OnPageSetup ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnPageSetup ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnPageSetup ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 415 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References s_pageSetupData.

416 {
417  wxPageSetupDialog pageSetupDialog( this, s_pageSetupData );
418  pageSetupDialog.ShowModal();
419 
420  (*s_PrintData) = pageSetupDialog.GetPageSetupDialogData().GetPrintData();
421  (*s_pageSetupData) = pageSetupDialog.GetPageSetupDialogData();
422 }
static wxPageSetupDialogData * s_pageSetupData
void DIALOG_PRINT_USING_PRINTER::OnPrintButtonClick ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnPrintButtonClick ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnPrintButtonClick ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 478 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References DisplayError(), PRINT_PARAMETERS::m_PageCount, m_parent, PRINT_PARAMETERS::m_PrintMaskLayer, s_PrintData, and SetPrintParameters().

479 {
481 
482  // If no layer selected, we have no plot. prompt user if it happens
483  // because he could think there is a bug in Pcbnew:
484  if( s_Parameters.m_PrintMaskLayer == 0 )
485  {
486  DisplayError( this, _( "No layer selected." ) );
487  return;
488  }
489 
490  wxPrintDialogData printDialogData( *s_PrintData );
491  printDialogData.SetMaxPage( s_Parameters.m_PageCount );
492 
493  wxPrinter printer( &printDialogData );
494 
495  wxString title = _( "Print" );
496  BOARD_PRINTOUT_CONTROLLER printout( s_Parameters, m_parent, title );
497 
498  if( !printer.Print( this, &printout, true ) )
499  {
500  if( wxPrinter::GetLastError() == wxPRINTER_ERROR )
501  DisplayError( this, _( "There was a problem printing." ) );
502 
503  return;
504  }
505  else
506  {
507  *s_PrintData = printer.GetPrintDialogData().GetPrintData();
508  }
509 }
static wxPrintData * s_PrintData
static PRINT_PARAMETERS s_Parameters
Class BOARD_PRINTOUT_CONTROLLER is a class derived from wxPrintout to handle the necessary informatio...
void DisplayError(wxWindow *parent, const wxString &text, int displaytime)
Function DisplayError displays an error or warning message box with aMessage.
Definition: confirm.cpp:71
void DIALOG_PRINT_USING_PRINTER::OnPrintPreview ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnPrintPreview ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnPrintPreview ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

Definition at line 425 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References DisplayError(), m_parent, PRINT_PARAMETERS::m_PrintMaskLayer, s_PrintData, and SetPrintParameters().

426 {
428 
429  // If no layer selected, we have no plot. prompt user if it happens
430  // because he could think there is a bug in Pcbnew:
431  if( s_Parameters.m_PrintMaskLayer == 0 )
432  {
433  DisplayError( this, _( "No layer selected" ) );
434  return;
435  }
436 
437  // Pass two printout objects: for preview, and possible printing.
438  wxString title = _( "Print Preview" );
439  wxPrintPreview* preview =
440  new wxPrintPreview( new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_parent, title ),
442  s_PrintData );
443 
444  if( preview == NULL )
445  {
446  DisplayError( this, wxT( "An error occurred attempting to show the print preview window." ) );
447  return;
448  }
449 
450  // Uses the parent position and size.
451  wxPoint WPos = m_parent->GetPosition();
452  wxSize WSize = m_parent->GetSize();
453 
454  preview->SetZoom( 100 );
455 
456  wxPreviewFrame* frame = new wxPreviewFrame( preview, this, title, WPos, WSize );
457  frame->SetMinSize( wxSize( 550, 350 ) );
458  frame->Center();
459 
460  // On wxGTK, set the flag wxTOPLEVEL_EX_DIALOG is mandatory, if we want
461  // close the frame using the X box in caption, when the preview frame is run
462  // from a dialog
463  frame->SetExtraStyle( frame->GetExtraStyle() | wxTOPLEVEL_EX_DIALOG );
464 
465  // We use here wxPreviewFrame_WindowModal option to make the wxPrintPreview frame
466  // modal for its caller only.
467  // An other reason is the fact when closing the frame without this option,
468  // all top level frames are reenabled.
469  // With this option, only the parent is reenabled.
470  // Reenabling all top level frames should be made by the parent dialog.
471  frame->InitializeWithModality( wxPreviewFrame_WindowModal );
472 
473  frame->Raise(); // Needed on Ubuntu/Unity to display the frame
474  frame->Show( true );
475 }
static wxPrintData * s_PrintData
static PRINT_PARAMETERS s_Parameters
Class BOARD_PRINTOUT_CONTROLLER is a class derived from wxPrintout to handle the necessary informatio...
void DisplayError(wxWindow *parent, const wxString &text, int displaytime)
Function DisplayError displays an error or warning message box with aMessage.
Definition: confirm.cpp:71
void DIALOG_PRINT_USING_PRINTER::OnScaleSelectionClick ( wxCommandEvent &  event)
overrideprivatevirtual

Reimplemented from DIALOG_PRINT_USING_PRINTER_BASE.

void DIALOG_PRINT_USING_PRINTER::OnScaleSelectionClick ( wxCommandEvent &  event)
overrideprivatevirtual
bool DIALOG_PRINT_USING_PRINTER::PreparePrintPrms ( )

Definition at line 345 of file gerbview/dialogs/dialog_print_using_printer.cpp.

References DisplayError(), GERBVIEW_FRAME::GetGerberLayout(), GBR_LAYOUT::GetPrintableLayers(), m_Parent, and SetPrintParameters().

346 {
348 
349  // If no layer selected, we have no plot. prompt user if it happens
350  // because he could think there is a bug in Pcbnew:
351  if( m_Parent->GetGerberLayout()->GetPrintableLayers().size() == 0 )
352  {
353  DisplayError( this, _( "No layer selected" ) );
354  return false;
355  }
356 
357  return true;
358 }
std::vector< int > GetPrintableLayers()
Function GetPrintableLayers.
GBR_LAYOUT * GetGerberLayout() const
void DisplayError(wxWindow *parent, const wxString &text, int displaytime)
Function DisplayError displays an error or warning message box with aMessage.
Definition: confirm.cpp:71
bool DIALOG_PRINT_USING_PRINTER::PrintUsingSinglePage ( )
inline
bool DIALOG_PRINT_USING_PRINTER::PrintUsingSinglePage ( )
inline

Definition at line 95 of file gerbview/dialogs/dialog_print_using_printer.cpp.

95 { return true; }
PROJECT & KIWAY_HOLDER::Prj ( ) const
inherited

Function Prj returns a reference to the PROJECT "associated with" this KIWAY.

Definition at line 34 of file kiway_holder.cpp.

References KIWAY_HOLDER::Kiway(), and KIWAY::Prj().

Referenced by DIALOG_EDIT_COMPONENT_IN_LIBRARY::AddAliasOfPart(), SCH_EDIT_FRAME::AppendSchematic(), PCB_EDIT_FRAME::ArchiveModulesOnBoard(), LIB_VIEW_FRAME::BestZoom(), DIALOG_MODULE_MODULE_EDITOR::BrowseAndAdd3DShapeFile(), DIALOG_MODULE_BOARD_EDITOR::BrowseAndAdd3DShapeFile(), DIALOG_EDIT_COMPONENT_IN_LIBRARY::BrowseAndSelectDocFile(), DIALOG_EXCHANGE_MODULE::BrowseAndSelectFootprint(), DIALOG_SYMBOL_LIB_TABLE::browseLibrariesHandler(), CVPCB_MAINFRAME::BuildLIBRARY_LISTBOX(), DIALOG_MODULE_MODULE_EDITOR::Cfg3DPath(), DIALOG_MODULE_BOARD_EDITOR::Cfg3DPath(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::copyPanelToOptions(), PCB_BASE_EDIT_FRAME::CreateNewLibrary(), LIB_EDIT_FRAME::CreateNewLibraryPart(), DIALOG_PLOT_SCHEMATIC::createPlotFileName(), DIALOG_SYMBOL_REMAP::createProjectSymbolLibTable(), FOOTPRINT_EDIT_FRAME::DeleteModuleFromCurrentLibrary(), LIB_EDIT_FRAME::DeleteOnePart(), DIALOG_CHOOSE_COMPONENT::DIALOG_CHOOSE_COMPONENT(), DIALOG_CONFIG_EQUFILES::DIALOG_CONFIG_EQUFILES(), DIALOG_FP_LIB_TABLE::DIALOG_FP_LIB_TABLE(), DIALOG_MODULE_BOARD_EDITOR::DIALOG_MODULE_BOARD_EDITOR(), DIALOG_MODULE_MODULE_EDITOR::DIALOG_MODULE_MODULE_EDITOR(), DIALOG_PAGES_SETTINGS::DIALOG_PAGES_SETTINGS(), DIALOG_SYMBOL_LIB_TABLE::DIALOG_SYMBOL_LIB_TABLE(), LIB_VIEW_FRAME::DisplayLibInfos(), LIB_EDIT_FRAME::DisplayLibInfos(), SCH_BASE_FRAME::DisplayListComponentsInLib(), PCB_EDIT_FRAME::doAutoSave(), DIALOG_MODULE_MODULE_EDITOR::Edit3DShapeFileName(), DIALOG_MODULE_BOARD_EDITOR::Edit3DShapeFileName(), SCH_EDIT_FRAME::EditComponentFieldText(), LIB_EDIT_FRAME::EditField(), SCH_EDIT_FRAME::EditSheet(), PCB_EDIT_FRAME::Export_IDF3(), PCB_EDIT_FRAME::ExportVRML_File(), PCB_EDIT_FRAME::Files_io_from_id(), PCB_EDIT_FRAME::GenD356File(), NETLIST_DIALOG::GenNetlist(), DISPLAY_FOOTPRINTS_FRAME::Get_Module(), FOOTPRINT_VIEWER_FRAME::getCurFootprintName(), LIB_EDIT_FRAME::GetCurLib(), FOOTPRINT_VIEWER_FRAME::getCurNickname(), FOOTPRINT_EDIT_FRAME::GetCurrentLib(), SCH_BASE_FRAME::GetLibAlias(), SCH_BASE_FRAME::GetLibPart(), FOOTPRINT_EDIT_FRAME::getLibPath(), DIALOG_SYMBOL_REMAP::getLibsNotInGlobalSymbolLibTable(), DIALOG_BOM::getPluginFileName(), LIB_VIEW_FRAME::getSelectedAlias(), FP_THREAD_IFACE::GetTable(), SCH_EDIT_FRAME::ImportFile(), PCB_EDIT_FRAME::ImportFile(), DIALOG_MODULE_MODULE_EDITOR::initModeditProperties(), DIALOG_MODULE_BOARD_EDITOR::InitModeditProperties(), PCB_EDIT_FRAME::InstallNetlistFrame(), SCH_EDIT_FRAME::IsSearchCacheObsolete(), SCH_EDIT_FRAME::Load_Component(), SCH_EDIT_FRAME::LoadCmpToFootprintLinkFile(), LIB_EDIT_FRAME::LoadComponentFromCurrentLib(), CVPCB_MAINFRAME::LoadFootprintFiles(), DIALOG_SPICE_MODEL::loadLibrary(), LIB_EDIT_FRAME::LoadOneSymbol(), CVPCB_MAINFRAME::LoadProjectFile(), SCH_EDIT_FRAME::LoadProjectFile(), PCB_EDIT_FRAME::LoadProjectSettings(), DIALOG_DRC_CONTROL::makeValidFileNameReport(), FOOTPRINT_VIEWER_FRAME::OnActivate(), DIALOG_GENCAD_EXPORT_OPTIONS::onBrowse(), DIALOG_DRC_CONTROL::OnButtonBrowseRptFileClick(), CVPCB_MAINFRAME::OnEditFootprintLibraryTable(), SCH_BASE_FRAME::OnEditSymbolLibTable(), DIALOG_GENDRILL::OnGenReportFile(), SCH_EDIT_FRAME::OnImportProject(), DIALOG_CHOOSE_COMPONENT::OnInitDialog(), PCB_EDIT_FRAME::OnLeftClick(), DIALOG_NETLIST::OnOpenNetlistClick(), DIALOG_PLOT::OnOutputDirectoryBrowseClicked(), DIALOG_SVG_PRINT::OnOutputDirectoryBrowseClicked(), DIALOG_GENDRILL::OnOutputDirectoryBrowseClicked(), DIALOG_PLOT_SCHEMATIC::OnOutputDirectoryBrowseClicked(), DIALOG_GEN_MODULE_POSITION::OnOutputDirectoryBrowseClicked(), LIB_EDIT_FRAME::OnPlotCurrentComponent(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), SCH_EDIT_FRAME::OnRightClick(), DIALOG_BOM::OnRunPlugin(), LIB_EDIT_FRAME::OnSaveCurrentPart(), DIALOG_NETLIST::OnSaveMessagesToFile(), SCH_EDIT_FRAME::OnSaveProject(), DIALOG_CHOOSE_COMPONENT::OnSchViewPaint(), DIALOG_SPICE_MODEL::onSelectLibrary(), LIB_VIEW_FRAME::OnSelectSymbol(), DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnTestChipName(), LIB_EDIT_FRAME::OnUpdateSaveCurrentLib(), LIB_EDIT_FRAME::OnUpdateSaveCurrentLibAs(), FOOTPRINT_EDIT_FRAME::OnUpdateSelectCurrentLib(), LIB_EDIT_FRAME::OnViewEntryDoc(), LIB_VIEW_FRAME::onViewSymbolDocument(), SCH_EDIT_FRAME::OpenProjectFiles(), PCB_EDIT_FRAME::OpenProjectFiles(), SCH_EDIT_FRAME::PasteListOfItems(), PCB_EDITOR_CONTROL::PlaceModule(), DIALOG_CHOOSE_COMPONENT::PopulateFootprintSelector(), SCH_EDIT_FRAME::Process_Config(), PCB_EDIT_FRAME::Process_Config(), FOOTPRINT_EDIT_FRAME::ProcessPreferences(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), PCB_EDIT_FRAME::RecreateCmpFileFromBoard(), FOOTPRINT_VIEWER_FRAME::ReCreateFootprintList(), LIB_VIEW_FRAME::ReCreateHToolbar(), FOOTPRINT_VIEWER_FRAME::ReCreateLibraryList(), LIB_VIEW_FRAME::ReCreateListCmp(), LIB_VIEW_FRAME::ReCreateListLib(), LIB_VIEW_FRAME::RedrawActiveWindow(), EDA_3D_VIEWER::ReloadRequest(), DIALOG_SYMBOL_REMAP::remapSymbolToLibTable(), SCH_EDIT_FRAME::RescueLegacyProject(), SCH_EDIT_FRAME::RescueSymbolLibTableProject(), FOOTPRINT_EDIT_FRAME::restoreLastFootprint(), FOOTPRINT_EDIT_FRAME::retainLastFootprint(), LIB_EDIT_FRAME::SaveActiveLibrary(), SCH_EDIT_FRAME::SaveEEFile(), FOOTPRINT_EDIT_FRAME::SaveFootprintInLibrary(), LIB_EDIT_FRAME::SaveOneSymbol(), CVPCB_MAINFRAME::SaveProjectFile(), SCH_EDIT_FRAME::SaveProjectSettings(), PCB_EDIT_FRAME::SaveProjectSettings(), FOOTPRINT_VIEWER_FRAME::SelectAndViewFootprint(), SCH_BASE_FRAME::SelectComponentFromLibrary(), FOOTPRINT_VIEWER_FRAME::SelectCurrentFootprint(), PCB_BASE_FRAME::SelectLibrary(), SCH_BASE_FRAME::SelectLibraryFromList(), SCH_EDIT_FRAME::sendNetlist(), FOOTPRINT_VIEWER_FRAME::setCurFootprintName(), LIB_EDIT_FRAME::SetCurLib(), FOOTPRINT_VIEWER_FRAME::setCurNickname(), LIB_EDIT_FRAME::SetCurPart(), DIALOG_CHOOSE_COMPONENT::ShowFootprintFor(), SIM_PLOT_FRAME::SIM_PLOT_FRAME(), EDA_3D_VIEWER::takeScreenshot(), SIM_PLOT_FRAME::updateNetlistExporter(), SCH_SCREEN::UpdateSymbolLinks(), FOOTPRINT_VIEWER_FRAME::UpdateTitle(), CVPCB_MAINFRAME::UpdateTitle(), FOOTPRINT_EDIT_FRAME::updateTitle(), SCH_EDIT_FRAME::WriteNetListFile(), DIALOG_MODULE_BOARD_EDITOR::~DIALOG_MODULE_BOARD_EDITOR(), and DIALOG_MODULE_MODULE_EDITOR::~DIALOG_MODULE_MODULE_EDITOR().

35 {
36  return Kiway().Prj();
37 }
KIWAY & Kiway() const
Function Kiway returns a reference to the KIWAY that this object has an opportunity to participate in...
Definition: kiway_player.h:60
VTBL_ENTRY PROJECT & Prj() const
Function Prj returns the PROJECT associated with this KIWAY.
Definition: kiway.cpp:144
void KIWAY_HOLDER::SetKiway ( wxWindow *  aDest,
KIWAY aKiway 
)
inherited

Function SetKiway.

Parameters
aDestis the recipient of aKiway pointer. It is only used for debugging, since "this" is not a wxWindow*. "this" is a KIWAY_HOLDER mix-in.
aKiwayis often from a parent window, or from KIFACE::CreateWindow().

Definition at line 41 of file kiway_holder.cpp.

References KIWAY_HOLDER::m_kiway, and name.

Referenced by DIALOG_SHIM::DIALOG_SHIM(), and SIM_PLOT_FRAME::SIM_PLOT_FRAME().

42 {
43 #if defined(DEBUG)
44  // offer a trap point for debugging most any window
45  wxASSERT( aDest );
46  if( !strcmp( typeid(aDest).name(), "DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB" ) )
47  {
48  int breakhere=1;
49  (void) breakhere;
50  }
51 #endif
52 
53  (void) aDest;
54 
55  m_kiway = aKiway;
56 }
KIWAY * m_kiway
Definition: kiway_player.h:85
const char * name
int DIALOG_PRINT_USING_PRINTER::SetLayerSetFromListSelection ( )

Definition at line 266 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References DIM, m_boxSelectLayer, DIALOG_PRINT_USING_PRINTER_BASE::m_Exclude_Edges_Pcb, m_ExcludeEdgeLayer, PRINT_PARAMETERS::m_Flags, PRINT_PARAMETERS::m_PageCount, PRINT_PARAMETERS::m_PrintMaskLayer, and PrintUsingSinglePage().

Referenced by SetPrintParameters().

267 {
268  int page_count = 0;
269 
271 
272  for( unsigned ii = 0; ii < DIM(m_boxSelectLayer); ++ii )
273  {
274  if( !m_boxSelectLayer[ii].first )
275  continue;
276 
277  if( m_boxSelectLayer[ii].first->IsChecked( m_boxSelectLayer[ii].second ) )
278  {
279  page_count++;
280  s_Parameters.m_PrintMaskLayer.set( ii );
281  }
282  }
283 
284  // In Pcbnew force the EDGE layer to be printed or not with the other layers
286  if( m_ExcludeEdgeLayer )
287  s_Parameters.m_Flags = 0;
288  else
289  s_Parameters.m_Flags = 1;
290 
291  if( PrintUsingSinglePage() )
292  page_count = 1;
293 
294  s_Parameters.m_PageCount = page_count;
295 
296  return page_count;
297 }
#define DIM(x)
of elements in an array
Definition: macros.h:98
Class LSET is a set of PCB_LAYER_IDs.
std::pair< wxCheckListBox *, int > m_boxSelectLayer[PCB_LAYER_ID_COUNT]
static PRINT_PARAMETERS s_Parameters
int DIALOG_PRINT_USING_PRINTER::SetLayerSetFromListSelection ( )
void DIALOG_PRINT_USING_PRINTER::SetPenWidth ( )
private

Definition at line 380 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References g_DrawDefaultLineThickness, g_UserUnit, DIALOG_PRINT_USING_PRINTER_BASE::m_DialogPenWidth, PRINT_PARAMETERS::m_PenDefaultSize, PEN_WIDTH_MAX_VALUE, PEN_WIDTH_MIN_VALUE, StringFromValue(), and ValueFromTextCtrl().

Referenced by SetPrintParameters().

381 {
382  // Get the new pen width value, and verify min et max value
383  // NOTE: s_Parameters.m_PenDefaultSize is in internal units
384 
386 
388  {
390  }
391 
393  {
395  }
396 
398 
399  m_DialogPenWidth->SetValue(
401 }
wxString StringFromValue(EDA_UNITS_T aUnit, int aValue, bool aAddUnitSymbol)
Function StringFromValue returns the string from aValue according to units (inch, mm ...
Definition: base_units.cpp:203
static PRINT_PARAMETERS s_Parameters
int g_DrawDefaultLineThickness
Default line thickness in internal units used to draw or plot items using a default thickness line va...
int ValueFromTextCtrl(const wxTextCtrl &aTextCtr)
Convert the number Value in a string according to the internal units and the selected unit (g_UserUni...
Definition: base_units.cpp:384
EDA_UNITS_T g_UserUnit
Global variables definitions.
Definition: common.cpp:56
void DIALOG_PRINT_USING_PRINTER::SetPrintParameters ( )
private
void DIALOG_PRINT_USING_PRINTER::SetPrintParameters ( )
private

Definition at line 332 of file pcbnew/dialogs/dialog_print_using_printer.cpp.

References DisplayInfoMessage(), PCB_BASE_FRAME::GetPlotSettings(), DIALOG_PRINT_USING_PRINTER_BASE::m_Drill_Shape_Opt, PRINT_PARAMETERS::m_DrillShapeOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustXscaleOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustYscaleOpt, DIALOG_PRINT_USING_PRINTER_BASE::m_ModeColorOption, PRINT_PARAMETERS::m_OptionPrintPage, DIALOG_PRINT_USING_PRINTER_BASE::m_PagesOption, m_parent, PRINT_PARAMETERS::m_Print_Black_and_White, DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Mirror, PRINT_PARAMETERS::m_Print_Sheet_Ref, DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Sheet_Ref, PRINT_PARAMETERS::m_PrintMirror, PRINT_PARAMETERS::m_PrintScale, DIALOG_PRINT_USING_PRINTER_BASE::m_ScaleOption, PRINT_PARAMETERS::m_XScaleAdjust, PRINT_PARAMETERS::m_YScaleAdjust, MAX_SCALE, MIN_SCALE, s_ScaleList, PCB_PLOT_PARAMS::SetFineScaleAdjustX(), PCB_PLOT_PARAMS::SetFineScaleAdjustY(), SetLayerSetFromListSelection(), SetPenWidth(), PCB_BASE_FRAME::SetPlotSettings(), and PCB_PLOT_PARAMS::SetScale().

Referenced by OnCloseWindow(), OnPrintButtonClick(), OnPrintPreview(), and PreparePrintPrms().

333 {
335 
339  m_ModeColorOption->GetSelection() != 0;
340 
343 
344  s_Parameters.m_OptionPrintPage = m_PagesOption->GetSelection() != 0;
345 
347 
348  int idx = m_ScaleOption->GetSelection();
350  plot_opts.SetScale( s_Parameters.m_PrintScale );
351 
353  {
356  DisplayInfoMessage( NULL, _( "Warning: Scale option set to a very large value" ) );
357 
358  m_FineAdjustXscaleOpt->GetValue().ToDouble( &s_Parameters.m_XScaleAdjust );
359  }
360 
362  {
363  // Test for a reasonable scale value
366  DisplayInfoMessage( NULL, _( "Warning: Scale option set to a very small value" ) );
367 
368  m_FineAdjustYscaleOpt->GetValue().ToDouble( &s_Parameters.m_YScaleAdjust );
369  }
370 
373 
374  m_parent->SetPlotSettings( plot_opts );
375 
376  SetPenWidth();
377 }
virtual const PCB_PLOT_PARAMS & GetPlotSettings() const
Function GetPlotSettings returns the PCB_PLOT_PARAMS for the BOARD owned by this frame.
static PRINT_PARAMETERS s_Parameters
virtual void SetPlotSettings(const PCB_PLOT_PARAMS &aSettings)
DrillShapeOptT m_DrillShapeOpt
void DisplayInfoMessage(wxWindow *aParent, const wxString &aMessage, const wxString aExtraInfo)
Function DisplayInfoMessage displays an informational message box with aMessage.
Definition: confirm.cpp:102
Class PCB_PLOT_PARAMS handles plot parameters and options when plotting/printing a board...
void SetScale(double aVal)
void SetFineScaleAdjustX(double aVal)
void SetFineScaleAdjustY(double aVal)
bool DIALOG_SHIM::Show ( bool  show)
overrideinherited

Definition at line 139 of file dialog_shim.cpp.

References class_map, DIALOG_SHIM::FixOSXCancelButtonIssue(), EDA_RECT::GetPosition(), EDA_RECT::GetSize(), DIALOG_SHIM::m_hash_key, wxPoint::x, and wxPoint::y.

Referenced by DisplayHotkeyList(), DIALOG_SHIM::EndQuasiModal(), InvokeDialogERC(), DIALOG_ANNOTATE::OnApplyClick(), DIALOG_SCH_FIND::OnCancel(), DIALOG_ANNOTATE::OnCancelClick(), DIALOG_DRC_CONTROL::OnLeftDClickClearance(), DIALOG_DRC_CONTROL::OnLeftDClickUnconnected(), DIALOG_DRC_CONTROL::OnPopupMenu(), DIALOG_EXCHANGE_MODULE::OnQuit(), POSITION_RELATIVE_TOOL::PositionRelative(), CVPCB_MAINFRAME::ReadNetListAndFpFiles(), DRC::ShowDRCDialog(), and DIALOG_SHIM::ShowQuasiModal().

140 {
141  bool ret;
142  const char* hash_key;
143 
144  if( m_hash_key.size() )
145  {
146  // a special case like EDA_LIST_DIALOG, which has multiple uses.
147  hash_key = m_hash_key.c_str();
148  }
149  else
150  {
151  hash_key = typeid(*this).name();
152  }
153 
154  // Show or hide the window. If hiding, save current position and size.
155  // If showing, use previous position and size.
156  if( show )
157  {
158  wxDialog::Raise(); // Needed on OS X and some other window managers (i.e. Unity)
159  ret = wxDialog::Show( show );
160 
161  // classname is key, returns a zeroed out default EDA_RECT if none existed before.
162  EDA_RECT r = class_map[ hash_key ];
163 
164  if( r.GetSize().x != 0 && r.GetSize().y != 0 )
165  SetSize( r.GetPosition().x, r.GetPosition().y, r.GetSize().x, r.GetSize().y, 0 );
166  }
167  else
168  {
169  // Save the dialog's position & size before hiding, using classname as key
170  EDA_RECT r( wxDialog::GetPosition(), wxDialog::GetSize() );
171  class_map[ hash_key ] = r;
172 
173  ret = wxDialog::Show( show );
174  }
175 
177 
178  return ret;
179 }
std::string m_hash_key
Definition: dialog_shim.h:128
void FixOSXCancelButtonIssue()
A ugly hack to fix an issue on OSX: when typing ctrl+c in a wxTextCtrl inside a dialog, it is closed instead of copying a text if a button with wxID_CANCEL is used in a wxStdDialogButtonSizer, when the dlg is created by wxFormBuilder: the label is &Cancel, and this accelerator key has priority to copy text standard accelerator, and the dlg is closed when trying to copy text this function do nothing on other platforms.
static RECT_MAP class_map
const wxPoint & GetPosition() const
Class EDA_RECT handles the component boundary box.
const wxSize & GetSize() const
int DIALOG_SHIM::ShowQuasiModal ( )
inherited

Definition at line 495 of file dialog_shim.cpp.

References DBG, DIALOG_SHIM::m_qmodal_loop, DIALOG_SHIM::m_qmodal_parent_disabler, DIALOG_SHIM::m_qmodal_showing, and DIALOG_SHIM::Show().

Referenced by LIB_EDIT_FRAME::DeleteOnePart(), SCH_EDIT_FRAME::EditComponent(), SCH_EDIT_FRAME::EditComponentFieldText(), LIB_EDIT_FRAME::EditField(), EDIT_TOOL::ExchangeFootprints(), PCB_EDIT_FRAME::InstallExchangeModuleFrame(), LIB_EDIT_FRAME::InstallFieldsEditorDialog(), SCH_EDIT_FRAME::InstallHierarchyFrame(), InvokeDialogCreateBOMEditor(), InvokeDialogUpdateFields(), SCH_EDIT_FRAME::OnRemapSymbols(), LIB_VIEW_FRAME::OnSelectSymbol(), SCH_EDIT_FRAME::OpenProjectFiles(), and SCH_BASE_FRAME::SelectComponentFromLibrary().

496 {
497  // This is an exception safe way to zero a pointer before returning.
498  // Yes, even though DismissModal() clears this first normally, this is
499  // here in case there's an exception before the dialog is dismissed.
500  struct NULLER
501  {
502  void*& m_what;
503  NULLER( void*& aPtr ) : m_what( aPtr ) {}
504  ~NULLER() { m_what = 0; } // indeed, set it to NULL on destruction
505  } clear_this( (void*&) m_qmodal_loop );
506 
507  // release the mouse if it's currently captured as the window having it
508  // will be disabled when this dialog is shown -- but will still keep the
509  // capture making it impossible to do anything in the modal dialog itself
510  wxWindow* win = wxWindow::GetCapture();
511  if( win )
512  win->ReleaseMouse();
513 
514  // Get the optimal parent
515  wxWindow* parent = GetParentForModalDialog( GetParent(), GetWindowStyle() );
516 
517  // Show the optimal parent
518  DBG( if( parent ) printf( "%s: optimal parent: %s\n", __func__, typeid(*parent).name() );)
519 
520  wxASSERT_MSG( !m_qmodal_parent_disabler,
521  wxT( "Caller using ShowQuasiModal() twice on same window?" ) );
522 
523  // quasi-modal: disable only my "optimal" parent
525 
526  Show( true );
527 
528  m_qmodal_showing = true;
529 
530  EVENT_LOOP event_loop;
531 
532  m_qmodal_loop = &event_loop;
533 
534  event_loop.Run();
535 
536  return GetReturnCode();
537 }
bool m_qmodal_showing
Definition: dialog_shim.h:132
EVENT_LOOP * m_qmodal_loop
Definition: dialog_shim.h:131
bool Show(bool show) override
WDO_ENABLE_DISABLE * m_qmodal_parent_disabler
Definition: dialog_shim.h:133
Toggle a window's "enable" status to disabled, then enabled on destruction.
Definition: dialog_shim.cpp:33
#define DBG(x)
Definition: fctsys.h:33

Member Data Documentation

wxCheckBox* DIALOG_PRINT_USING_PRINTER::m_BoxSelectLayer[32]
private

Definition at line 75 of file gerbview/dialogs/dialog_print_using_printer.cpp.

Referenced by InitValues().

std::pair<wxCheckListBox*, int> DIALOG_PRINT_USING_PRINTER::m_boxSelectLayer[PCB_LAYER_ID_COUNT]
private
wxButton * DIALOG_PRINT_USING_PRINTER_BASE::m_buttonOption
protectedinherited
wxButton* DIALOG_PRINT_USING_PRINTER_BASE::m_buttonPageSetup
protectedinherited
wxButton * DIALOG_PRINT_USING_PRINTER_BASE::m_buttonPrint
protectedinherited
wxButton * DIALOG_PRINT_USING_PRINTER_BASE::m_buttonQuit
protectedinherited
wxCheckBox* DIALOG_PRINT_USING_PRINTER_BASE::m_checkMonochrome
protectedinherited
wxCheckBox* DIALOG_PRINT_USING_PRINTER_BASE::m_checkReference
protectedinherited
wxConfigBase* DIALOG_PRINT_USING_PRINTER::m_Config
private
wxConfigBase* DIALOG_PRINT_USING_PRINTER::m_config
private
wxCheckListBox* DIALOG_PRINT_USING_PRINTER_BASE::m_CopperLayersList
protectedinherited
wxTextCtrl* DIALOG_PRINT_USING_PRINTER_BASE::m_DialogPenWidth
protectedinherited
wxRadioBox* DIALOG_PRINT_USING_PRINTER_BASE::m_Drill_Shape_Opt
protectedinherited
wxCheckBox* DIALOG_PRINT_USING_PRINTER_BASE::m_Exclude_Edges_Pcb
protectedinherited
bool DIALOG_PRINT_USING_PRINTER::m_ExcludeEdgeLayer
staticprivate
wxTextCtrl * DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustXscaleOpt
protectedinherited
wxStaticText * DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustXscaleTitle
protectedinherited
wxTextCtrl * DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustYscaleOpt
protectedinherited
wxStaticText * DIALOG_PRINT_USING_PRINTER_BASE::m_FineAdjustYscaleTitle
protectedinherited
std::string DIALOG_SHIM::m_hash_key
protectedinherited
wxStaticBoxSizer* DIALOG_PRINT_USING_PRINTER_BASE::m_leftLayersBoxSizer
protectedinherited

Definition at line 48 of file gerbview/dialogs/dialog_print_using_printer_base.h.

Referenced by InitValues().

wxRadioBox * DIALOG_PRINT_USING_PRINTER_BASE::m_ModeColorOption
protectedinherited
wxRadioBox* DIALOG_PRINT_USING_PRINTER_BASE::m_PagesOption
protectedinherited
GERBVIEW_FRAME* DIALOG_PRINT_USING_PRINTER::m_Parent
private
PCB_EDIT_FRAME* DIALOG_PRINT_USING_PRINTER::m_parent
private
wxCheckBox * DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Mirror
protectedinherited
wxCheckBox* DIALOG_PRINT_USING_PRINTER_BASE::m_Print_Sheet_Ref
protectedinherited
EVENT_LOOP* DIALOG_SHIM::m_qmodal_loop
protectedinherited

Definition at line 131 of file dialog_shim.h.

Referenced by DIALOG_SHIM::EndQuasiModal(), and DIALOG_SHIM::ShowQuasiModal().

WDO_ENABLE_DISABLE* DIALOG_SHIM::m_qmodal_parent_disabler
protectedinherited
bool DIALOG_SHIM::m_qmodal_showing
protectedinherited
wxStaticBoxSizer* DIALOG_PRINT_USING_PRINTER_BASE::m_rightLayersBoxSizer
protectedinherited

Definition at line 49 of file gerbview/dialogs/dialog_print_using_printer_base.h.

Referenced by InitValues().

wxStaticText* DIALOG_PRINT_USING_PRINTER_BASE::m_staticText1
protectedinherited
wxStaticText* DIALOG_PRINT_USING_PRINTER_BASE::m_staticText4
protectedinherited
wxStaticText* DIALOG_PRINT_USING_PRINTER_BASE::m_staticText5
protectedinherited
wxCheckListBox* DIALOG_PRINT_USING_PRINTER_BASE::m_TechnicalLayersList
protectedinherited
wxStaticText* DIALOG_PRINT_USING_PRINTER_BASE::m_TextPenWidth
protectedinherited

The documentation for this class was generated from the following file: