KiCad PCB EDA Suite
CVPCB_CONTROL Class Reference

Class CVPCB_CONTROL. More...

#include <cvpcb_control.h>

Inheritance diagram for CVPCB_CONTROL:
TOOL_INTERACTIVE TOOL_BASE

Public Types

enum  RESET_REASON { RUN, MODEL_RELOAD, GAL_SWITCH }
 

Determines the reason of reset for a tool

More...
 

Public Member Functions

 CVPCB_CONTROL ()
 
 ~CVPCB_CONTROL ()
 
void Reset (RESET_REASON aReason) override
 Function Reset() Brings the tool to a known, initial state. More...
 
int ResetCoords (const TOOL_EVENT &aEvent)
 
int SwitchCursor (const TOOL_EVENT &aEvent)
 
int SwitchUnits (const TOOL_EVENT &aEvent)
 
void setTransitions () override
 

Sets up handlers for various events.

More...
 
void Activate ()
 Function Activate() Runs the tool. More...
 
void SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Function SetContextMenu() More...
 
void RunMainStack (std::function< void()> aFunc)
 Function RunMainStack() More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Go() More...
 
OPT_TOOL_EVENT Wait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Function Wait() More...
 
virtual bool Init ()
 Function Init() Init() is called once upon a registration of the tool. More...
 
TOOL_TYPE GetType () const
 Function GetType() Returns the type of the tool. More...
 
TOOL_ID GetId () const
 Function GetId() Returns the unique identifier of the tool. More...
 
const std::string & GetName () const
 Function GetName() Returns the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool. More...
 
TOOL_SETTINGSGetSettings ()
 
bool IsToolActive () const
 

Protected Member Functions

const TOOL_EVENT evActivate (std::string aToolName="")
 functions below are not yet implemented - their interface may change More...
 
const TOOL_EVENT evCommand (int aCommandId=-1)
 
const TOOL_EVENT evCommand (std::string aCommandStr="")
 
const TOOL_EVENT evMotion ()
 
const TOOL_EVENT evClick (int aButton=BUT_ANY)
 
const TOOL_EVENT evDrag (int aButton=BUT_ANY)
 
const TOOL_EVENT evButtonUp (int aButton=BUT_ANY)
 
const TOOL_EVENT evButtonDown (int aButton=BUT_ANY)
 
void attachManager (TOOL_MANAGER *aManager)
 Function attachManager() More...
 
KIGFX::VIEWgetView () const
 Function getView() More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Function getViewControls() More...
 
template<typename T >
T * getEditFrame () const
 Function getEditFrame() More...
 
template<typename T >
T * getModel () const
 Function getModel() More...
 

Protected Attributes

TOOL_TYPE m_type
 

Stores the type of the tool.

More...
 
TOOL_ID m_toolId
 

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

More...
 
std::string m_toolName
 

Name of the tool.

More...
 
TOOL_MANAGERm_toolMgr
 
TOOL_SETTINGS m_toolSettings
 

Private Member Functions

void updateGrid ()
 

Applies the legacy canvas grid settings for GAL.

More...
 
KIGFX::VIEWview ()
 

Private Attributes

DISPLAY_FOOTPRINTS_FRAMEm_frame
 

Pointer to the currently used edit/draw frame.

More...
 
std::unique_ptr< KIGFX::ORIGIN_VIEWITEMm_gridOrigin
 

Grid origin marker.

More...
 

Detailed Description

Class CVPCB_CONTROL.

Handles actions in cvpcb display frame.

Definition at line 42 of file cvpcb_control.h.

Member Enumeration Documentation

◆ RESET_REASON

enum TOOL_BASE::RESET_REASON
inherited

Determines the reason of reset for a tool

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

Definition at line 80 of file tool_base.h.

81  {
82  RUN,
83  MODEL_RELOAD,
84  GAL_SWITCH
85  };
Model changes (required full reload)
Definition: tool_base.h:83
Tool is invoked after being inactive.
Definition: tool_base.h:82
Rendering engine changes.
Definition: tool_base.h:84

Constructor & Destructor Documentation

◆ CVPCB_CONTROL()

CVPCB_CONTROL::CVPCB_CONTROL ( )

Definition at line 65 of file cvpcb_control.cpp.

65  :
66  TOOL_INTERACTIVE( "cvpcb.Control" ), m_frame( NULL )
67 {
68 }
TOOL_INTERACTIVE(TOOL_ID aId, const std::string &aName)
Constructor.
DISPLAY_FOOTPRINTS_FRAME * m_frame
Pointer to the currently used edit/draw frame.
Definition: cvpcb_control.h:61

◆ ~CVPCB_CONTROL()

CVPCB_CONTROL::~CVPCB_CONTROL ( )

Definition at line 71 of file cvpcb_control.cpp.

72 {
73 }

Member Function Documentation

◆ Activate()

void TOOL_INTERACTIVE::Activate ( )
inherited

Function Activate() Runs the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 49 of file tool_interactive.cpp.

50 {
52 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:211
bool InvokeTool(TOOL_ID aToolId)
Function InvokeTool() Calls a tool by sending a tool activation event to tool of given ID.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), LIB_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), EDIT_TOOL::doCopyToClipboard(), SCH_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), SCH_DRAWING_TOOLS::doPlaceComponent(), SCH_DRAWING_TOOLS::doSingleClickPlace(), LIB_DRAWING_TOOLS::doTwoClickPlace(), SCH_DRAWING_TOOLS::doTwoClickPlace(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::drawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), MODULE_EDITOR_TOOLS::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_EDITOR_CONTROL::HighlightNetCursor(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), SCH_MOVE_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), EDIT_TOOL::Main(), LENGTH_TUNER_TOOL::mainLoop(), ROUTER_TOOL::mainLoop(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), EDIT_TOOL::pickCopyReferencePoint(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), PCB_EDITOR_CONTROL::ShowLocalRatsnest(), SCH_WIRE_BUS_TOOL::StartBus(), SCH_WIRE_BUS_TOOL::StartWire(), and SCH_WIRE_BUS_TOOL::UnfoldBus().

◆ attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Function attachManager()

Sets the TOOL_MANAGER the tool will belong to. Called by TOOL_MANAGER::RegisterTool()

Definition at line 59 of file tool_base.cpp.

60 {
61  m_toolMgr = aManager;
62  m_toolSettings = TOOL_SETTINGS( this );
63 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
TOOL_SETTINGS m_toolSettings
Definition: tool_base.h:217
friend class TOOL_SETTINGS
Definition: tool_base.h:155

References TOOL_BASE::m_toolMgr, TOOL_BASE::m_toolSettings, and TOOL_BASE::TOOL_SETTINGS.

Referenced by TOOL_MANAGER::RegisterTool().

◆ evActivate()

const TOOL_EVENT TOOL_INTERACTIVE::evActivate ( std::string  aToolName = "")
protectedinherited

functions below are not yet implemented - their interface may change

◆ evButtonDown()

const TOOL_EVENT TOOL_INTERACTIVE::evButtonDown ( int  aButton = BUT_ANY)
protectedinherited

◆ evButtonUp()

const TOOL_EVENT TOOL_INTERACTIVE::evButtonUp ( int  aButton = BUT_ANY)
protectedinherited

◆ evClick()

const TOOL_EVENT TOOL_INTERACTIVE::evClick ( int  aButton = BUT_ANY)
protectedinherited

◆ evCommand() [1/2]

const TOOL_EVENT TOOL_INTERACTIVE::evCommand ( int  aCommandId = -1)
protectedinherited

◆ evCommand() [2/2]

const TOOL_EVENT TOOL_INTERACTIVE::evCommand ( std::string  aCommandStr = "")
protectedinherited

◆ evDrag()

const TOOL_EVENT TOOL_INTERACTIVE::evDrag ( int  aButton = BUT_ANY)
protectedinherited

◆ evMotion()

const TOOL_EVENT TOOL_INTERACTIVE::evMotion ( )
protectedinherited

◆ getEditFrame()

template<typename T >
T* TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Function getEditFrame()

Returns the application window object, casted to requested user type.

Definition at line 188 of file tool_base.h.

189  {
190  return static_cast<T*>( getEditFrameInt() );
191  }
wxWindow * getEditFrameInt() const
Definition: tool_base.cpp:47

References TOOL_BASE::getEditFrameInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), and TOOL_SETTINGS::getConfigBase().

◆ GetId()

TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Function GetId() Returns the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 122 of file tool_base.h.

123  {
124  return m_toolId;
125  }
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:211

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::saveViewControls().

◆ GetManager()

TOOL_MANAGER* TOOL_BASE::GetManager ( ) const
inlineinherited

Function GetManager() Returns the instance of TOOL_MANAGER that takes care of the tool.

Returns
Instance of the TOOL_MANAGER. If there is no TOOL_MANAGER associated, it returns NULL.

Definition at line 144 of file tool_base.h.

145  {
146  return m_toolMgr;
147  }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216

References TOOL_BASE::m_toolMgr.

Referenced by BOARD_COMMIT::BOARD_COMMIT(), ZONE_CREATE_HELPER::createNewZone(), PCB_TOOL_BASE::doInteractiveItemPlacement(), ACTION_MENU::getToolManager(), ACTION_MENU::onMenuEvent(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ getModel()

template<typename T >
T* TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Function getModel()

Returns the model object if it matches the requested type.

Definition at line 199 of file tool_base.h.

200  {
201  EDA_ITEM* m = getModelInt();
202  wxASSERT( dynamic_cast<T*>( m ) );
203 
204  return static_cast<T*>( m );
205  }
EDA_ITEM * getModelInt() const
Definition: tool_base.cpp:53
Class EDA_ITEM is a base class for most all the KiCad significant classes, used in schematics and boa...
Definition: base_struct.h:157

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), ZONE_CREATE_HELPER::createZoneFromExisting(), and ZONE_CREATE_HELPER::performZoneCutout().

◆ GetName()

const std::string& TOOL_BASE::GetName ( void  ) const
inlineinherited

Function GetName() Returns the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 133 of file tool_base.h.

134  {
135  return m_toolName;
136  }
std::string m_toolName
Name of the tool.
Definition: tool_base.h:215

References TOOL_BASE::m_toolName.

Referenced by TOOL_SETTINGS::getKeyName(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), and TOOL_MANAGER::RegisterTool().

◆ GetSettings()

TOOL_SETTINGS & TOOL_BASE::GetSettings ( )
inherited

Definition at line 77 of file tool_base.cpp.

78 {
79  return m_toolSettings;
80 }
TOOL_SETTINGS m_toolSettings
Definition: tool_base.h:217

References TOOL_BASE::m_toolSettings.

Referenced by ROUTER_TOOL::Init(), GERBVIEW_SELECTION_TOOL::selectable(), and ROUTER_TOOL::~ROUTER_TOOL().

◆ GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Function GetType() Returns the type of the tool.

Returns
The type of the tool.

Definition at line 111 of file tool_base.h.

112  {
113  return m_type;
114  }
TOOL_TYPE m_type
Stores the type of the tool.
Definition: tool_base.h:208

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), and TOOL_MANAGER::runTool().

◆ getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Function getView()

Returns the instance of VIEW object used in the application. It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 35 of file tool_base.cpp.

36 {
37  return m_toolMgr->GetView();
38 }
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:252
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), EE_SELECTION_TOOL::clearSelection(), PCB_EDITOR_CONTROL::CrossProbeSchToPcb(), COMMON_TOOLS::CursorControl(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), COMMON_TOOLS::doGridPreset(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), MICROWAVE_TOOL::drawMicrowaveInductor(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), MODULE_EDITOR_TOOLS::EnumeratePads(), SELECTION_TOOL::findCallback(), ROUTER_TOOL::getStartLayer(), PCBNEW_CONTROL::GridResetOrigin(), PCBNEW_CONTROL::GridSetOrigin(), SELECTION_TOOL::guessSelectionCandidates(), EE_SELECTION_TOOL::highlight(), SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), PNS::TOOL_BASE::highlightNet(), PCBNEW_CONTROL::LayerAlphaDec(), PCBNEW_CONTROL::LayerAlphaInc(), EE_POINT_EDITOR::Main(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), LIB_EDIT_TOOL::Paste(), PNS::TOOL_BASE::pickSingleItem(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), PCB_EDITOR_CONTROL::Reset(), PNS::TOOL_BASE::Reset(), PCBNEW_CONTROL::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), DRAWING_TOOL::Reset(), EE_SELECTION_TOOL::Reset(), SELECTION_TOOL::Reset(), EE_TOOL_BASE< SCH_BASE_FRAME >::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), GERBVIEW_SELECTION_TOOL::selectable(), SELECTION_TOOL::selectable(), GERBVIEW_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectionContains(), SELECTION_TOOL::selectionContains(), GERBVIEW_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), COMMON_TOOLS::ToggleGrid(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), EE_SELECTION_TOOL::unhighlight(), SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), POINT_EDITOR::updateEditedPoint(), PCBNEW_CONTROL::updateGrid(), EE_POINT_EDITOR::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), POINT_EDITOR::updatePoints(), SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), EE_TOOL_BASE< SCH_BASE_FRAME >::updateView(), PCB_TOOL_BASE::view(), COMMON_TOOLS::ZoomFitScreen(), GERBVIEW_SELECTION_TOOL::zoomFitSelection(), SELECTION_TOOL::zoomFitSelection(), CVPCB_SELECTION_TOOL::~CVPCB_SELECTION_TOOL(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and SELECTION_TOOL::~SELECTION_TOOL().

◆ getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Function getViewControls()

Returns the instance of VIEW_CONTROLS object used in the application. It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.)

Returns
The instance of VIEW_CONTROLS.

Definition at line 41 of file tool_base.cpp.

42 {
43  return m_toolMgr->GetViewControls();
44 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:257

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), SCH_EDIT_TOOL::BreakWire(), PCB_TOOL_BASE::controls(), COMMON_TOOLS::CursorControl(), SCH_WIRE_BUS_TOOL::doDrawSegments(), SCH_DRAWING_TOOLS::doPlaceComponent(), SCH_DRAWING_TOOLS::doSingleClickPlace(), LIB_DRAWING_TOOLS::doTwoClickPlace(), SCH_DRAWING_TOOLS::doTwoClickPlace(), COMMON_TOOLS::doZoomToPreset(), MICROWAVE_TOOL::drawMicrowaveInductor(), LIB_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), MODULE_EDITOR_TOOLS::EnumeratePads(), SELECTION_TOOL::findMove(), SCH_WIRE_BUS_TOOL::finishSegments(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_EDITOR_CONTROL::HighlightNet(), PCB_EDITOR_CONTROL::HighlightNetCursor(), SCH_MOVE_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), EE_PICKER_TOOL::Main(), PICKER_TOOL::Main(), CVPCB_SELECTION_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), EDIT_TOOL::Main(), ROUTER_TOOL::mainLoop(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceImage(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), SCH_EDIT_TOOL::RepeatDrawItem(), EE_SELECTION_TOOL::RequestSelection(), POINT_EDITOR::Reset(), DRAWING_TOOL::Reset(), ResetCoords(), GERBVIEW_CONTROL::ResetCoords(), PCBNEW_CONTROL::ResetCoords(), GERBVIEW_SELECTION_TOOL::selectCursor(), SELECTION_TOOL::selectCursor(), GERBVIEW_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), EE_PICKER_TOOL::setControls(), PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), POINT_EDITOR::setEditedPoint(), LIB_MOVE_TOOL::updateModificationPoint(), SCH_MOVE_TOOL::updateModificationPoint(), EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

◆ Go()

template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited

Function Go()

Defines which state (aStateFunc) to go when a certain event arrives (aConditions). No conditions means any event.

Definition at line 135 of file tool_interactive.h.

137 {
138  TOOL_STATE_FUNC sptr = std::bind( aStateFunc, static_cast<T*>( this ), std::placeholders::_1 );
139 
140  goInternal( sptr, aConditions );
141 }
std::function< int(const TOOL_EVENT &)> TOOL_STATE_FUNC
Definition: tool_base.h:59
void goInternal(TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)

References TOOL_INTERACTIVE::goInternal().

Referenced by ZOOM_TOOL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), LENGTH_TUNER_TOOL::setTransitions(), MICROWAVE_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), PAD_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), EE_POINT_EDITOR::setTransitions(), LIB_CONTROL::setTransitions(), LIB_PIN_TOOL::setTransitions(), ZONE_FILLER_TOOL::setTransitions(), setTransitions(), LIB_DRAWING_TOOLS::setTransitions(), LIB_MOVE_TOOL::setTransitions(), POINT_EDITOR::setTransitions(), GERBVIEW_CONTROL::setTransitions(), SCH_MOVE_TOOL::setTransitions(), LIB_EDIT_TOOL::setTransitions(), SCH_EDIT_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), COMMON_TOOLS::setTransitions(), CVPCB_SELECTION_TOOL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), MODULE_EDITOR_TOOLS::setTransitions(), SCH_WIRE_BUS_TOOL::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), PCBNEW_CONTROL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), EE_PICKER_TOOL::setTransitions(), PICKER_TOOL::setTransitions(), PCB_EDITOR_CONTROL::setTransitions(), SELECTION_TOOL::setTransitions(), EDIT_TOOL::setTransitions(), DRAWING_TOOL::setTransitions(), and EE_SELECTION_TOOL::setTransitions().

◆ Init()

◆ IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 30 of file tool_base.cpp.

31 {
32  return m_toolMgr->IsToolActive( m_toolId );
33 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
TOOL_ID m_toolId
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:211
bool IsToolActive(TOOL_ID aId) const
Function IsToolActive() Returns true if a tool with given id is active (executing)

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

◆ Reset()

void CVPCB_CONTROL::Reset ( RESET_REASON  aReason)
overridevirtual

Function Reset() Brings the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Implements TOOL_BASE.

Definition at line 76 of file cvpcb_control.cpp.

77 {
78  m_frame = getEditFrame<DISPLAY_FOOTPRINTS_FRAME>();
79 }
DISPLAY_FOOTPRINTS_FRAME * m_frame
Pointer to the currently used edit/draw frame.
Definition: cvpcb_control.h:61

References m_frame.

◆ ResetCoords()

int CVPCB_CONTROL::ResetCoords ( const TOOL_EVENT aEvent)

Definition at line 83 of file cvpcb_control.cpp.

84 {
85  auto vcSettings = m_toolMgr->GetCurrentToolVC();
86 
87  // Use either the active tool forced cursor position or the general settings
88  VECTOR2I cursorPos = vcSettings.m_forceCursorPosition ? vcSettings.m_forcedPosition :
90 
91  m_frame->GetScreen()->m_O_Curseur = wxPoint( cursorPos.x, cursorPos.y );
93 
94  return 0;
95 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
wxPoint m_O_Curseur
Relative Screen cursor coordinate (on grid) in user units.
Definition: base_screen.h:185
const KIGFX::VC_SETTINGS & GetCurrentToolVC() const
Returns the view controls settings for the current tool or the general settings if there is no active...
virtual void UpdateStatusBar() override
Update the status bar information.
PCB_SCREEN * GetScreen() const override
Return a pointer to a BASE_SCREEN or one of its derivatives.
KIGFX::VIEW_CONTROLS * getViewControls() const
Function getViewControls()
Definition: tool_base.cpp:41
DISPLAY_FOOTPRINTS_FRAME * m_frame
Pointer to the currently used edit/draw frame.
Definition: cvpcb_control.h:61
VECTOR2D GetCursorPosition() const
Returns the current cursor position in world coordinates.

References TOOL_MANAGER::GetCurrentToolVC(), KIGFX::VIEW_CONTROLS::GetCursorPosition(), PCB_BASE_FRAME::GetScreen(), TOOL_BASE::getViewControls(), m_frame, BASE_SCREEN::m_O_Curseur, TOOL_BASE::m_toolMgr, PCB_BASE_FRAME::UpdateStatusBar(), VECTOR2< T >::x, and VECTOR2< T >::y.

Referenced by setTransitions().

◆ RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Function RunMainStack()

Calls a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 85 of file tool_interactive.cpp.

86 {
87  m_toolMgr->RunMainStack( this, std::move( aFunc ) );
88 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

◆ SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Function SetContextMenu()

Assigns a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 74 of file tool_interactive.cpp.

75 {
76  if( aMenu )
77  aMenu->SetTool( this );
78  else
79  aTrigger = CMENU_OFF;
80 
81  m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
82 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
void SetTool(TOOL_INTERACTIVE *aTool)
Function SetTool() Sets a tool that is the creator of the menu.
void ScheduleContextMenu(TOOL_BASE *aTool, ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Sets behaviour of the tool's context popup menu.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), LENGTH_TUNER_TOOL::mainLoop(), ROUTER_TOOL::mainLoop(), TOOL_MENU::ShowContextMenu(), and SCH_WIRE_BUS_TOOL::UnfoldBus().

◆ setTransitions()

void CVPCB_CONTROL::setTransitions ( )
overridevirtual

Sets up handlers for various events.

Implements TOOL_INTERACTIVE.

Definition at line 116 of file cvpcb_control.cpp.

117 {
118  // Miscellaneous
122 }
static TOOL_ACTION resetCoords
Definition: cvpcb_actions.h:55
int SwitchUnits(const TOOL_EVENT &aEvent)
void Go(int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
Function Go()
int ResetCoords(const TOOL_EVENT &aEvent)
static TOOL_ACTION switchCursor
Definition: cvpcb_actions.h:56
static TOOL_ACTION switchUnits
Definition: cvpcb_actions.h:57
int SwitchCursor(const TOOL_EVENT &aEvent)

References TOOL_INTERACTIVE::Go(), ResetCoords(), CVPCB_ACTIONS::resetCoords, SwitchCursor(), CVPCB_ACTIONS::switchCursor, SwitchUnits(), and CVPCB_ACTIONS::switchUnits.

◆ SwitchCursor()

int CVPCB_CONTROL::SwitchCursor ( const TOOL_EVENT aEvent)

Definition at line 98 of file cvpcb_control.cpp.

99 {
100  auto& galOpts = m_frame->GetGalDisplayOptions();
101 
102  galOpts.m_fullscreenCursor = !galOpts.m_fullscreenCursor;
103  galOpts.NotifyChanged();
104 
105  return 0;
106 }
KIGFX::GAL_DISPLAY_OPTIONS & GetGalDisplayOptions()
Return a reference to the gal rendering options used by GAL for rendering.
Definition: draw_frame.h:949
bool m_fullscreenCursor
Fullscreen crosshair or small cross
DISPLAY_FOOTPRINTS_FRAME * m_frame
Pointer to the currently used edit/draw frame.
Definition: cvpcb_control.h:61

References EDA_DRAW_FRAME::GetGalDisplayOptions(), m_frame, and KIGFX::GAL_DISPLAY_OPTIONS::m_fullscreenCursor.

Referenced by setTransitions().

◆ SwitchUnits()

int CVPCB_CONTROL::SwitchUnits ( const TOOL_EVENT aEvent)

Definition at line 109 of file cvpcb_control.cpp.

110 {
112  return 0;
113 }
void ChangeUserUnits(EDA_UNITS_T aUnits)
Definition: draw_frame.h:292
EDA_UNITS_T GetUserUnits() const override
Return the user units currently in use.
Definition: draw_frame.h:289
Definition: common.h:158
DISPLAY_FOOTPRINTS_FRAME * m_frame
Pointer to the currently used edit/draw frame.
Definition: cvpcb_control.h:61

References EDA_DRAW_FRAME::ChangeUserUnits(), EDA_DRAW_FRAME::GetUserUnits(), INCHES, m_frame, and MILLIMETRES.

Referenced by setTransitions().

◆ updateGrid()

void CVPCB_CONTROL::updateGrid ( )
private

Applies the legacy canvas grid settings for GAL.

◆ view()

KIGFX::VIEW* CVPCB_CONTROL::view ( )
inlineprivate

Definition at line 69 of file cvpcb_control.h.

70  {
71  return m_frame->GetGalCanvas()->GetView();
72  }
EDA_DRAW_PANEL_GAL * GetGalCanvas() const
Return a pointer to GAL-based canvas of given EDA draw frame.
Definition: draw_frame.h:931
KIGFX::VIEW * GetView() const
Function GetView() Returns a pointer to the VIEW instance used in the panel.
DISPLAY_FOOTPRINTS_FRAME * m_frame
Pointer to the currently used edit/draw frame.
Definition: cvpcb_control.h:61

References EDA_DRAW_FRAME::GetGalCanvas(), EDA_DRAW_PANEL_GAL::GetView(), and m_frame.

◆ Wait()

OPT_TOOL_EVENT TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Function Wait()

Suspends execution of the tool until an event specified in aEventList arrives. No parameters means waiting for any event.

Definition at line 55 of file tool_interactive.cpp.

56 {
57  return m_toolMgr->ScheduleWait( this, aEventList );
58 }
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:216
OPT< TOOL_EVENT > ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pauses execution of a given tool until one or more events matching aConditions arrives.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by LIB_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), GERBVIEW_SELECTION_TOOL::disambiguationMenu(), SCH_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), SCH_DRAWING_TOOLS::doPlaceComponent(), EE_SELECTION_TOOL::doSelectionMenu(), SELECTION_TOOL::doSelectionMenu(), SCH_DRAWING_TOOLS::doSingleClickPlace(), LIB_DRAWING_TOOLS::doTwoClickPlace(), SCH_DRAWING_TOOLS::doTwoClickPlace(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::drawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), MODULE_EDITOR_TOOLS::EnumeratePads(), PCBNEW_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_EDITOR_CONTROL::HighlightNetCursor(), ROUTER_TOOL::InlineDrag(), ZOOM_TOOL::Main(), SCH_MOVE_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), EE_PICKER_TOOL::Main(), PICKER_TOOL::Main(), CVPCB_SELECTION_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), EDIT_TOOL::Main(), SELECTION_TOOL::Main(), LENGTH_TUNER_TOOL::mainLoop(), ROUTER_TOOL::mainLoop(), CVPCB_SELECTION_TOOL::MeasureTool(), GERBVIEW_SELECTION_TOOL::MeasureTool(), EDIT_TOOL::MeasureTool(), POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), EDIT_TOOL::pickCopyReferencePoint(), LIB_DRAWING_TOOLS::PlaceAnchor(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), GERBVIEW_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), PCB_EDITOR_CONTROL::ShowLocalRatsnest(), and SCH_WIRE_BUS_TOOL::UnfoldBus().

Member Data Documentation

◆ m_frame

DISPLAY_FOOTPRINTS_FRAME* CVPCB_CONTROL::m_frame
private

Pointer to the currently used edit/draw frame.

Definition at line 61 of file cvpcb_control.h.

Referenced by Reset(), ResetCoords(), SwitchCursor(), SwitchUnits(), and view().

◆ m_gridOrigin

std::unique_ptr<KIGFX::ORIGIN_VIEWITEM> CVPCB_CONTROL::m_gridOrigin
private

Grid origin marker.

Definition at line 64 of file cvpcb_control.h.

◆ m_toolId

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 211 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

◆ m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 216 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), EE_SELECTION_TOOL::AddItemsToSel(), EE_SELECTION_TOOL::AddItemToSel(), SCH_DRAWING_TOOLS::AddJunction(), SCH_DRAWING_TOOLS::AddLabel(), TOOL_BASE::attachManager(), PCB_EDITOR_CONTROL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDITOR_CONTROL::ClearHighlight(), PCB_EDITOR_CONTROL::ClearHighlight(), GERBVIEW_SELECTION_TOOL::clearSelection(), EE_SELECTION_TOOL::clearSelection(), SELECTION_TOOL::clearSelection(), SCH_EDIT_TOOL::ConvertDeMorgan(), LIB_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), MODULE_EDITOR_TOOLS::CreatePadFromShapes(), PCB_EDITOR_CONTROL::CrossProbePcbToSch(), PCB_EDITOR_CONTROL::CrossProbeSchToPcb(), COMMON_TOOLS::CursorControl(), ROUTER_TOOL::CustomTrackWidthDialog(), SCH_EDITOR_CONTROL::Cut(), LIB_EDIT_TOOL::DeleteItemCursor(), SCH_EDIT_TOOL::DeleteItemCursor(), PCBNEW_CONTROL::DeleteItemCursor(), SCH_EDITOR_CONTROL::doCopy(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), LIB_EDIT_TOOL::DoDelete(), SCH_EDIT_TOOL::DoDelete(), SCH_WIRE_BUS_TOOL::doDrawSegments(), SCH_DRAWING_TOOLS::doPlaceComponent(), SCH_DRAWING_TOOLS::doSingleClickPlace(), LIB_DRAWING_TOOLS::doTwoClickPlace(), SCH_DRAWING_TOOLS::doTwoClickPlace(), DRAWING_TOOL::drawArc(), SCH_WIRE_BUS_TOOL::DrawBusses(), DRAWING_TOOL::DrawDimension(), SCH_WIRE_BUS_TOOL::DrawLines(), DRAWING_TOOL::drawSegment(), LIB_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_WIRE_BUS_TOOL::DrawWires(), DRAWING_TOOL::drawZone(), PCB_EDITOR_CONTROL::DrillOrigin(), LIB_EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), EDIT_TOOL::editFootprintInFpEditor(), LIB_EDIT_TOOL::editSymbolProperties(), SCH_EDITOR_CONTROL::EditWithSymbolEditor(), SCH_EDITOR_CONTROL::EnterSheet(), MODULE_EDITOR_TOOLS::EnumeratePads(), EDIT_TOOL::ExchangeFootprints(), SELECTION_TOOL::expandConnection(), MODULE_EDITOR_TOOLS::ExplodePadToShapes(), SELECTION_TOOL::findCallback(), SELECTION_TOOL::findMove(), SCH_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), TOOL_BASE::getEditFrameInt(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), PCBNEW_CONTROL::GridSetOrigin(), GERBVIEW_CONTROL::HighlightControl(), SCH_EDITOR_CONTROL::HighlightNet(), PCB_EDITOR_CONTROL::HighlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PCB_EDITOR_CONTROL::HighlightNetCursor(), LIB_EDIT_TOOL::Init(), SCH_EDIT_TOOL::Init(), PAD_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), PCB_EDITOR_CONTROL::Init(), POINT_EDITOR::Init(), POSITION_RELATIVE_TOOL::Init(), EDIT_TOOL::Init(), EE_TOOL_BASE< SCH_BASE_FRAME >::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isInteractiveDragEnabled(), TOOL_BASE::IsToolActive(), ZOOM_TOOL::Main(), SCH_MOVE_TOOL::Main(), EE_POINT_EDITOR::Main(), LIB_MOVE_TOOL::Main(), EE_PICKER_TOOL::Main(), PICKER_TOOL::Main(), EDIT_TOOL::Main(), EE_SELECTION_TOOL::Main(), SELECTION_TOOL::Main(), LENGTH_TUNER_TOOL::mainLoop(), ROUTER_TOOL::mainLoop(), LIB_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), PCB_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), POINT_EDITOR::OnSelectionChange(), LIB_EDIT_TOOL::Paste(), SCH_EDITOR_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), EDIT_TOOL::pickCopyReferencePoint(), LIB_EDIT_TOOL::PinTable(), PCBNEW_CONTROL::placeBoardItems(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PCB_EDITOR_CONTROL::PlaceModule(), PCB_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), LIB_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), SCH_EDITOR_CONTROL::Redo(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), POINT_EDITOR::removeCorner(), EE_SELECTION_TOOL::RemoveItemFromSel(), EE_SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), LIB_DRAWING_TOOLS::RepeatDrawItem(), SELECTION_TOOL::RequestSelection(), ResetCoords(), PCBNEW_CONTROL::ResetCoords(), TOOL_INTERACTIVE::resetTransitions(), LIB_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), TOOL_INTERACTIVE::RunMainStack(), EE_SELECTION_TOOL::SelectConnection(), SELECTION_TOOL::selectCopper(), PCB_TOOL_BASE::selection(), GERBVIEW_SELECTION_TOOL::SelectItem(), SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), SELECTION_TOOL::SelectItems(), GERBVIEW_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectMultiple(), SELECTION_TOOL::selectNet(), EE_SELECTION_TOOL::SelectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), SELECTION_TOOL::selectSameSheet(), SELECTION_TOOL::selectSheetContents(), TOOL_INTERACTIVE::SetContextMenu(), PCB_EDITOR_CONTROL::ShowLocalRatsnest(), SCH_WIRE_BUS_TOOL::StartBus(), SCH_WIRE_BUS_TOOL::StartLine(), SCH_WIRE_BUS_TOOL::StartWire(), GERBVIEW_SELECTION_TOOL::toggleSelection(), EE_SELECTION_TOOL::toggleSelection(), SELECTION_TOOL::toggleSelection(), PCB_EDITOR_CONTROL::TrackWidthDec(), PCB_EDITOR_CONTROL::TrackWidthInc(), SCH_EDITOR_CONTROL::Undo(), SCH_WIRE_BUS_TOOL::UnfoldBus(), GERBVIEW_SELECTION_TOOL::UnselectItem(), SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SELECTION_TOOL::UnselectItems(), EE_INSPECTION_TOOL::UpdateMessagePanel(), PCB_EDITOR_CONTROL::UpdateSelectionRatsnest(), PCB_EDITOR_CONTROL::ViaSizeDec(), PCB_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), PCB_EDITOR_CONTROL::ZoneDuplicate(), and PCB_EDITOR_CONTROL::ZoneMerge().

◆ m_toolName

std::string TOOL_BASE::m_toolName
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 215 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

◆ m_toolSettings

TOOL_SETTINGS TOOL_BASE::m_toolSettings
protectedinherited

Definition at line 217 of file tool_base.h.

Referenced by TOOL_BASE::attachManager(), and TOOL_BASE::GetSettings().

◆ m_type

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Stores the type of the tool.

Definition at line 208 of file tool_base.h.

Referenced by TOOL_BASE::GetType().


The documentation for this class was generated from the following files: